The mux smux2_xspi_clk{0,1} used for selecting spi and spix2 clocks and
pllcm33_xspi divider to select different clock rates. Add support for
both.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add definitions for XSPI core clock and Gigabit Ethernet PTP reference
core clocks in the R9A09G047 CPG DT bindings header file.
The clk_spi is modelled as a fixed divider clock with parent clk_spix2 and
factor two as both parent and child share same gating bit.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
These clocks locate in VO and VPU GRF, serving for SD/SDIO controller
tuning purpose. Add their definitions and register them in driver if
corresponding GRF is available.
GRFs are looked up by compatible to simplify devicetree binding.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250506092206.46143-4-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Registers of MMC drive/sample clocks in Rockchip RV1106 and RK3528
locate in GRF regions. Adjust MMC clock code to support register
operations through regmap.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250506092206.46143-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document the support for matrix multiply accumulate instruction
from SiFive using RISCV_HWPROBE_VENDOR_EXT_XSFVFWMACCQQQ.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-12-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add "xsfvfwmaccqqq" ISA extension which is provided by SiFive for
matrix multiply accumulate instructions support.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250418053239.4351-10-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Document the support for SiFive vendor extensions for
FP32-to-int8 Ranged Clip Instructions using
RISCV_HWPROBE_VENDOR_EXT_XSFVFNRCLIPXFQF.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-8-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add "xsfvfnrclipxfqf" ISA extension which is provided by SiFive for
FP32-to-int8 ranged clip instructions support.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250418053239.4351-6-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a new hwprobe key "RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0" which allows
userspace to probe for the new vendor extensions from SiFive. Also, add
new hwprobe for SiFive "xsfvqmaccdod" and "xsfvqmaccqoq" vendor
extensions.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-5-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Document the support for sifive vendor extensions using the key
RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0 and two vendor extensions for SiFive
Int8 Matrix Multiplication Instructions using
RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCDOD and
RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCQOQ.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-4-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add SiFive vendor extension support to the kernel with the target of
"xsfvqmaccdod" and "xsfvqmaccqoq".
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-3-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add "xsfvqmaccdod" and "xsfvqmaccqoq" ISA extensions which are provided by
SiFive for int8 matrix multiplication instructions support.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250418053239.4351-2-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
These clocks are for SD/SDIO tuning purpose and come with registers
in GRF syscon.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250506092206.46143-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Following commit b956c9de91 ("arm64: dts: rockchip: rk356x: Move
PCIe MSI to use GIC ITS instead of MBI"), change the PCIe3 controller's
MSI on rk3568 to use ITS, so that all MSI-X can work properly.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250308093008.568437-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When RISC-V borned, DT_GNU_HASH had already became the de-facto
standard so DT_HASH is just wasting storage space. Remove the explicit
--hash-style=both setting and rely on the distro toolchain default,
which is most likely "gnu" (i.e. generating only DT_GNU_HASH, no
DT_HASH).
Following the logic of commit 48f6430505
("arm64/vdso: Remove --hash-style=sysv").
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250224112042.60282-2-xry111@xry111.site
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add the 3.3v and 1.8v regulators that are connected to
the eMMC on the R5 series devices, as well as adding the
eMMC data strobe, and enable eMMC HS200 mode as the
Foresee FEMDNN0xxG-A3A55 modules support it.
Fixes: c8ec73b05a ("arm64: dts: rockchip: create common dtsi for NanoPi R5 series")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250506222531.625157-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cyril Bur <cyrilbur@tenstorrent.com> says:
This series tries to optimize riscv uaccess by allowing the use of
user_access_begin() and user_access_end() which permits grouping user accesses
and avoiding the CSR write penalty for each access.
The error path can also be optimised using asm goto which patches 3 and 4
achieve. This will speed up jumping to labels by avoiding the need of an
intermediary error type variable within the uaccess macros
I did read the discussion this series generated. It isn't clear to me
which direction to take the patches, if any.
* b4-shazam-merge:
riscv: uaccess: use 'asm_goto_output' for get_user()
riscv: uaccess: use 'asm goto' for put_user()
riscv: uaccess: use input constraints for ptr of __put_user()
riscv: implement user_access_begin() and families
riscv: save the SR_SUM status over switches
Link: https://lore.kernel.org/r/20250410070526.3160847-1-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With 'asm goto' we don't need to test the error etc, the exception just
jumps to the error handling directly.
Unlike put_user(), get_user() must work around GCC bugs [1] when using
output clobbers in an asm goto statement.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 # 1
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
[Cyril Bur: Rewritten commit message]
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250410070526.3160847-6-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With 'asm goto' we don't need to test the error etc, the exception just
jumps to the error handling directly.
Because there are no output clobbers which could trigger gcc bugs [1]
the use of asm_goto_output() macro is not necessary here. Not using
asm_goto_output() is desirable as the generated output asm will be
cleaner.
Use of the volatile keyword is redundant as per gcc 14.2.0 manual section
6.48.2.7 Goto Labels:
> Also note that an asm goto statement is always implicitly considered
volatile.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 # 1
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
[Cyril Bur: Rewritten commit message]
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250410070526.3160847-5-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Putting ptr in the inputs as opposed to output may seem incorrect but
this is done for a few reasons:
- Not having it in the output permits the use of asm goto in a
subsequent patch. There are bugs in gcc [1] which would otherwise
prevent it.
- Since the output memory is userspace there isn't any real benefit from
telling the compiler about the memory clobber.
- x86, arm and powerpc all use this technique.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 # 1
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
[Cyril Bur: Rewritten commit message]
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250410070526.3160847-4-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, when a function like strncpy_from_user() is called,
the userspace access protection is disabled and enabled
for every word read.
By implementing user_access_begin() and families, the protection
is disabled at the beginning of the copy and enabled at the end.
The __inttype macro is borrowed from x86 implementation.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250410070526.3160847-3-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When threads/tasks are switched we need to ensure the old execution's
SR_SUM state is saved and the new thread has the old SR_SUM state
restored.
The issue was seen under heavy load especially with the syz-stress tool
running, with crashes as follows in schedule_tail:
Unable to handle kernel access to user memory without uaccess routines
at virtual address 000000002749f0d0
Oops [#1]
Modules linked in:
CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted
5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0
Hardware name: riscv-virtio,qemu (DT)
epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264
ra : task_pid_vnr include/linux/sched.h:1421 [inline]
ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264
epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0
gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000
t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0
s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003
a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00
a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba
s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0
s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850
s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8
s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2
t5 : ffffffc4043cafba t6 : 0000000000040000
status: 0000000000000120 badaddr: 000000002749f0d0 cause:
000000000000000f
Call Trace:
[<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264
[<ffffffe000005570>] ret_from_exception+0x0/0x14
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace b5f8f9231dc87dda ]---
The issue comes from the put_user() in schedule_tail
(kernel/sched/core.c) doing the following:
asmlinkage __visible void schedule_tail(struct task_struct *prev)
{
...
if (current->set_child_tid)
put_user(task_pid_vnr(current), current->set_child_tid);
...
}
the put_user() macro causes the code sequence to come out as follows:
1: __enable_user_access()
2: reg = task_pid_vnr(current);
3: *current->set_child_tid = reg;
4: __disable_user_access()
The problem is that we may have a sleeping function as argument which
could clear SR_SUM causing the panic above. This was fixed by
evaluating the argument of the put_user() macro outside the user-enabled
section in commit 285a76bb2c ("riscv: evaluate put_user() arg before
enabling user access")"
In order for riscv to take advantage of unsafe_get/put_XXX() macros and
to avoid the same issue we had with put_user() and sleeping functions we
must ensure code flow can go through switch_to() from within a region of
code with SR_SUM enabled and come back with SR_SUM still enabled. This
patch addresses the problem allowing future work to enable full use of
unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost
on every access. Make switch_to() save and restore SR_SUM.
Reported-by: syzbot+e74b94fe601ab9552d69@syzkaller.appspotmail.com
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Link: https://lore.kernel.org/r/20250410070526.3160847-2-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This reverts commit f5c68a4e84.
It is again possible to build "allmodconfig" with the randstruct GCC
plugin, so enable it for COMPILE_TEST to catch future bugs.
Signed-off-by: Kees Cook <kees@kernel.org>
The recent fix in commit c2ea09b193d2 ("randstruct: gcc-plugin: Remove
bogus void member") has fixed another issue: it was not always detecting
composite structures made only of function pointers and structures of
function pointers. Add a test for this case, and break out the layout
tests since this issue is actually a problem for Clang as well[1].
Link: https://github.com/llvm/llvm-project/issues/138355 [1]
Link: https://lore.kernel.org/r/20250502224116.work.591-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
When building the randomized replacement tree of struct members, the
randstruct GCC plugin would insert, as the first member, a 0-sized void
member. This appears as though it was done to catch non-designated
("unnamed") static initializers, which wouldn't be stable since they
depend on the original struct layout order.
This was accomplished by having the side-effect of the "void member"
tripping an assert in GCC internals (count_type_elements) if the member
list ever needed to be counted (e.g. for figuring out the order of members
during a non-designated initialization), which would catch impossible type
(void) in the struct:
security/landlock/fs.c: In function ‘hook_file_ioctl_common’:
security/landlock/fs.c:1745:61: internal compiler error: in count_type_elements, at expr.cc:7075
1745 | .u.op = &(struct lsm_ioctlop_audit) {
| ^
static HOST_WIDE_INT
count_type_elements (const_tree type, bool for_ctor_p)
{
switch (TREE_CODE (type))
...
case VOID_TYPE:
default:
gcc_unreachable ();
}
}
However this is a redundant safety measure since randstruct uses the
__designated_initializer attribute both internally and within the
__randomized_layout attribute macro so that this would be enforced
by the compiler directly even when randstruct was not enabled (via
-Wdesignated-init).
A recent change in Landlock ended up tripping the same member counting
routine when using a full-struct copy initializer as part of an anonymous
initializer. This, however, is a false positive as the initializer is
copying between identical structs (and hence identical layouts). The
"path" member is "struct path", a randomized struct, and is being copied
to from another "struct path", the "f_path" member:
landlock_log_denial(landlock_cred(file->f_cred), &(struct landlock_request) {
.type = LANDLOCK_REQUEST_FS_ACCESS,
.audit = {
.type = LSM_AUDIT_DATA_IOCTL_OP,
.u.op = &(struct lsm_ioctlop_audit) {
.path = file->f_path,
.cmd = cmd,
},
},
...
As can be seen with the coming randstruct KUnit test, there appears to
be no behavioral problems with this kind of initialization when the void
member is removed from the randstruct GCC plugin, so remove it.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Closes: https://lore.kernel.org/lkml/Z_PRaKx7q70MKgCA@gallifrey/
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/20250407-kbuild-disable-gcc-plugins-v1-1-5d46ae583f5e@kernel.org/
Reported-by: WangYuli <wangyuli@uniontech.com>
Closes: https://lore.kernel.org/lkml/337D5D4887277B27+3c677db3-a8b9-47f0-93a4-7809355f1381@uniontech.com/
Fixes: 313dd1b629 ("gcc-plugins: Add the randstruct plugin")
Signed-off-by: Kees Cook <kees@kernel.org>
After a recent change [1] in clang's randstruct implementation to
randomize structures that only contain function pointers, there is an
error because qede_ll_ops get randomized but does not use a designated
initializer for the first member:
drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer
206 | {
| ^
Explicitly initialize the common member using a designated initializer
to fix the build.
Cc: stable@vger.kernel.org
Fixes: 035f7f87b7 ("randstruct: Enable Clang support")
Link: 04364fb888 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250507-qede-fix-clang-randstruct-v1-1-5ccc15626fba@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Recent fixes to the randstruct GCC plugin allowed it to notice
that this structure is entirely function pointers and is therefore
subject to randomization, but doing so requires that it always use
designated initializers. Explicitly specify the "common" member as being
initialized. Silences:
drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
702 | {
| ^
Fixes: 035f7f87b7 ("randstruct: Enable Clang support")
Link: https://lore.kernel.org/r/20250502224156.work.617-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
GCC 15's new -Wunterminated-string-initialization notices that the 16
character lookup table "zero_uuid" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/md/bcache/super.c: In function 'uuid_find_empty':
drivers/md/bcache/super.c:549:43: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
549 | static const char zero_uuid[16] = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add the annotation (since it is not used as a C-String), and switch the
initializer to an array of bytes rather than an empty initializer,
as preferred by Coly Li.
Suggested-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/lkml/389A9925-0990-422C-A1B3-0195FAA73288@coly.li/
Signed-off-by: Kees Cook <kees@kernel.org>
Since the integer wrapping sanitizer's behavior depends on its associated
.scl file, we must force a full rebuild if the file changes. If not,
instrumentation may differ between targets based on when they were built.
Generate a new header file, integer-wrap.h, any time the Clang .scl
file changes. Include the header file in compiler-version.h when its
associated feature name, INTEGER_WRAP, is defined. This will be picked
up by fixdep and force rebuilds where needed.
Acked-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20250503184623.2572355-3-kees@kernel.org
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
While the randstruct GCC plugin was being rebuilt if the randstruct seed
changed, Clang builds did not notice the change. This could result in
differing struct layouts in a target depending on when it was built.
Include the existing generated header file in compiler-version.h when
its associated feature name, RANDSTRUCT, is defined. This will be picked
up by fixdep and force rebuilds where needed.
Link: https://lore.kernel.org/r/20250503184623.2572355-2-kees@kernel.org
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
There was no dependency between the plugins changing and the rest of the
kernel being built. This could cause strange behaviors as instrumentation
could vary between targets depending on when they were built.
Generate a new header file, gcc-plugins.h, any time the GCC plugins
change. Include the header file in compiler-version.h when its associated
feature name, GCC_PLUGINS, is defined. This will be picked up by fixdep
and force rebuilds where needed.
Add a generic "touch" kbuild command, which will be used again in
a following patch. Add a "normalize_path" string helper to make the
"TOUCH" output less ugly.
Link: https://lore.kernel.org/r/20250503184623.2572355-1-kees@kernel.org
Tested-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>