Commit graph

1,385,869 commits

Author SHA1 Message Date
Srinivas Pandruvada
c935ddfe65
platform/x86: ISST: Do Not Restore SST MSRs on CPU Online Operation
During CPU offline/online operations, the hardware retains MSR settings.
Even if all CPUs are offlined, the package does not lose its MSR
settings.

Therefore, it is unnecessary to restore MSRs which are modified during
the online operation, and this extra step can be removed.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250505202722.1048675-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:04:10 +03:00
Srinivas Pandruvada
c9a20142d3
platform/x86: ISST: Update minor version
Update SST minor version after supporting SST-PP and SST-TF version 2.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250506163531.1061185-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:04:08 +03:00
Srinivas Pandruvada
d6644d737b
platform/x86: ISST: Support SST-PP revision 2
SST PP revision 2 added fabric 1 P0, P1 and Pm frequencies. Export them
by using a new IOCTL ISST_IF_GET_PERF_LEVEL_FABRIC_INFO. This IOCTL
requires platforms with SST PP revision 2 or higher.

To accommodate potential future increases in fabric count and avoid ABI
changes, support is extended for up to 8 fabrics.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250506163531.1061185-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:04:06 +03:00
Srinivas Pandruvada
885d1c2a30
platform/x86: ISST: Support SST-TF revision 2
SST-TF revision 2 supports a higher number of cores per bucket, as the
current limit of 256 cores may be insufficient. To accommodate this, a
new offset, "SST_TF_INFO-8," is introduced, allowing for a higher core
count. Utilize this offset instead of the current "SST_TF_INFO-1" offset,
based on SST-TF revision 2 or higher, and if there is a non-zero core
count in any bucket.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250506163531.1061185-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:04:04 +03:00
Kurt Borja
df6061c276
Documentation: wmi: alienware-wmi: Add GPIO control documentation
Add documentation for the GPIO control methods.

Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250505-awcc-gpio-v4-2-edda44c3a0dc@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:04:02 +03:00
Kurt Borja
aee5cf935c
platform/x86: alienware-wmi-wmax: Expose GPIO debug methods
Expose GPIO control methods present on the AWCC interface through
DebugFS.

These models come with an RGB lighting STM32 MCU, which usually has two
GPIO pins with debug capabilities:

 - Pin 0: Device Firmware Update mode (DFU)
 - Pin 1: Negative Reset (NRST)

Suggested-by: Gabriel Marcano <gabemarcano@yahoo.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250505-awcc-gpio-v4-1-edda44c3a0dc@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:04:00 +03:00
Werner Sembach
cfd84b3f41
platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices
The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key
controllable RGB keyboard backlight. The firmware API for it is implemented
via WMI.

To make the backlight userspace configurable this driver emulates a
LampArray HID device and translates the input from hidraw to the
corresponding WMI calls. This is a new approach as the leds subsystem lacks
a suitable UAPI for per-key keyboard backlights, and like this no new UAPI
needs to be established.

The handle_* functions an corresponding structs are named based on the HID
spec: HID Usage Tables 1.6 -> 26 Lighting And Illumination Page (0x59)

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250425210043.342288-2-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:58 +03:00
Luke D. Jones
feea7bd6b0
platform/x86: asus-wmi: Refactor Ally suspend/resume
Adjust how the CSEE direct call hack is used.

The results of months of testing combined with help from ASUS to
determine the actual cause of suspend issues has resulted in this
refactoring which immensely improves the reliability for devices which
do not have the following minimum MCU FW version:
- ROG Ally X: 313
- ROG Ally 1: 319

For MCU FW versions that match the minimum or above the CSEE hack is
disabled and mcu_powersave set to on by default as there are no
negatives beyond a slightly slower device reinitialization due to the
MCU being powered off.

As this is set only at module load time, it is still possible for
mcu_powersave sysfs attributes to change it at runtime if so desired.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250323023421.78012-3-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:56 +03:00
Luke D. Jones
00e005c952
hid-asus: check ROG Ally MCU version and warn
ASUS have fixed suspend issues arising from a flag not being cleared in
the MCU FW in both the ROG Ally 1 and the ROG Ally X.

Implement a check and a warning to encourage users to update the FW to
a minimum supported version.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250323023421.78012-2-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:54 +03:00
Antheas Kapenekakis
b369395c89
platform/x86: oxpec: Add support for the OneXPlayer G1
The OneXPlayer G1 is a new clamshell formfactor by OneXPlayer.
It has the same registers as an OneXPlayer X1, with the only
difference being the lack of a turbo led.

Tested-by: Joshua Tam <csinaction@pm.me>
Suggested-by: Joshua Tam <csinaction@pm.me>
Signed-off-by: Joshua Tam <csinaction@pm.me>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250426172955.13957-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:53 +03:00
Antheas Kapenekakis
e25a982b38
platform/x86: oxpec: Make turbo val apply a bitmask
On the OneXPlayer G1, the turbo register is multiplexed and contains an
extra bit (0x02) which is set on boot. Therefore, we should only change
the 0x40 bit to not affect other behavior. Collapse the disable and
enable functions, and apply a mask for the turbo bit instead.

Tested-by: Joshua Tam <csinaction@pm.me>
Suggested-by: Joshua Tam <csinaction@pm.me>
Signed-off-by: Joshua Tam <csinaction@pm.me>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250426172955.13957-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:51 +03:00
Vadim Pasternak
4e29dd3821
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Add documentation for the new attributes:
- Request and response for access to protetced flashes:
  "global_wp_request", "global_wp_response".
  Only for systems equipped with BMC - grant can be provided only by
  BMC in case its security policy allows to grant access.
- Request to unlock ASICs, which has been shutdown due-to ASIC thermal
  event: "shutdown_unlock".
- Data processor Units (DPU) boot progress: "boot_progress".
- DPU reset causes: "reset_aux_pwr_or_reload", "reset_dpu_thermal",
  "reset_from_main_board".
- Reset control for DPU components: "perst_rst", "phy_rst", "tpm_rst",
  "usbphy_rst".
- DPU Unified Fabric Manager upgrade - "ufm_upgrade".
- Hardware Id of Data Process Unit board - "dpu_id".

Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250504165507.9003-3-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:49 +03:00
Vadim Pasternak
56b0bb7f90
platform: mellanox: nvsw-sn2200: Add support for new system flavour
Add support for SN2201 system flavour, which is fitting OCP rack
form-factor and feeded from external power source through the rack
standard busbar interface.

Validate system type through DMI decode.
For new system flavour:
- Skip internal power supply configuration.
- Attach power hotswap device.

Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250504165507.9003-2-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:48 +03:00
Dan Carpenter
c5925f4384
platform/x86: oxpec: Add a lower bounds check in oxp_psy_ext_set_prop()
The "val->intval" variable is an integer which comes from the user.  This
code has an upper bounds check but the lower bounds check was
accidentally omitted.  The write_to_ec() take a u8 value as a parameter
so negative values would be truncated to positive values in the 0-255
range.

Return -EINVAL if the user passes a negative value.

Fixes: 202593d1e86b ("platform/x86: oxpec: Add charge threshold and behaviour to OneXPlayer")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/aBSE71VKfBlQg_fZ@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:46 +03:00
Xi Pardee
a59211ee46
platform/x86:intel/pmc: Improve pmc_core_get_lpm_req()
Minor improvements on pmc_core_get_lpm_req().
1. Move the long comment to be above the function
2. Use %pe to print error pointer
3. Remove unneeded devm_kfree call

These changes improves the code maintainability.

Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250425195237.493129-6-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:45 +03:00
Xi Pardee
1e24546894
platform/x86:intel/pmc: Move error handling to init function
Move error handling code to generic_core_init() function. The previous
implementation is that init function called for "full cleanup" function
when error occurs which is error prone. The init function should handle
the error path itself to improve code maintainability.

Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250425195237.493129-5-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:43 +03:00
Xi Pardee
6f130e048d
platform/x86:intel/pmc: Use devm for mutex_init
Use devm_mutex_init() to avoid accidental resource leak in the
future.

Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250425195237.493129-4-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:41 +03:00
Xi Pardee
b5d4653962
platform/x86:intel/pmc: Create Intel PMC SSRAM Telemetry driver
Convert ssram device related functionalities to a new driver named Intel
PMC SSRAM Telemetry driver. Modify PMC Core driver to use API exported by
the driver to discover and achieve devid and PWRMBASE address information
for each available PMC. PMC Core driver needs to get PCI device when
reading from telemetry regions.

The new SSRAM driver binds to the SSRAM device and provides the following
functionalities:
1. Look for and register telemetry regions available in SSRAM device.
2. Provide devid and PWRMBASE address information for the corresponding
   PMCs.

Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250425195237.493129-3-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:40 +03:00
Xi Pardee
812bca7f7e
platform/x86:intel/vsec: Change return type of intel_vsec_register
Change return type of intel_vsec_register() to int. The current
implementation does not indicate if the register fail or not.
Change to return error code if it fails or if INTEL_VSEC config
is not set. This is a preparation step to introduce a new SSRAM
Telemetry driver that will be using this API.

Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250425195237.493129-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:37 +03:00
Michał Kopeć
841bceb532
platform/x86: Introduce dasharo-acpi platform driver
Introduce a driver for devices running Dasharo firmware. The driver
supports thermal monitoring using a new ACPI interface in Dasharo. The
initial version supports monitoring fan speeds, fan PWM duty cycles and
system temperatures as well as determining which specific interfaces are
implemented by firmware.

It has been tested on a NovaCustom laptop running pre-release Dasharo
firmware, which implements fan and thermal monitoring for the CPU and
the discrete GPU, if present.

Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Link: https://lore.kernel.org/all/20250507075214.36729-1-lukas.bulwahn@redhat.com
Link: https://lore.kernel.org/r/20250425112147.69308-2-michal.kopec@3mdeb.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-08 16:03:18 +03:00
Srinivas Kandagatla
12d3c69ba2 mux: gpio: add optional regulator support
Some of the external muxes needs powering up using a regulator.
This is the case with Lenovo T14s laptop which has a external audio mux
to handle US/EURO headsets.

Add support to the driver to handle this optional regulator.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250327100633.11530-3-srinivas.kandagatla@linaro.org
[krzk: Adjust dev_err message per Johan's review]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-05-08 14:55:36 +02:00
Srinivas Kandagatla
e9c695067b dt-bindings: mux: add optional regulator binding to gpio mux
On some platforms to minimise pop and click during switching between
CTIA and OMTP headset an additional HiFi Mux Switch is used. Most common
case is that this switch is switched on by default, but on some
platforms this needs a regulator enable. One such platform is Lenovo
T14s.

Adds required bindings in gpio-mux to add such optional regulator.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250327100633.11530-2-srinivas.kandagatla@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-05-08 14:53:11 +02:00
Huang Yiwei
59529bbe64 firmware: SDEI: Allow sdei initialization without ACPI_APEI_GHES
SDEI usually initialize with the ACPI table, but on platforms where
ACPI is not used, the SDEI feature can still be used to handle
specific firmware calls or other customized purposes. Therefore, it
is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES.

In commit dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES
in acpi_init()"), to make APEI ready earlier, sdei_init was moved
into acpi_ghes_init instead of being a standalone initcall, adding
ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the
flexibility and usability of SDEI.

This patch corrects the dependency in Kconfig and splits sdei_init()
into two separate functions: sdei_init() and acpi_sdei_init().
sdei_init() will be called by arch_initcall and will only initialize
the platform driver, while acpi_sdei_init() will initialize the
device from acpi_ghes_init() when ACPI is ready. This allows the
initialization of SDEI without ACPI_APEI_GHES enabled.

Fixes: dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
2025-05-08 13:35:22 +01:00
Samuel Holland
7f1c3de137 riscv: Disallow PR_GET_TAGGED_ADDR_CTRL without Supm
When the prctl() interface for pointer masking was added, it did not
check that the pointer masking ISA extension was supported, only the
individual submodes. Userspace could still attempt to disable pointer
masking and query the pointer masking state. commit 81de1afb2dd1
("riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL") disallowed
the former, as the senvcfg write could crash on older systems.
PR_GET_TAGGED_ADDR_CTRL state does not crash, because it reads only
kernel-internal state and not senvcfg, but it should still be disallowed
for consistency.

Fixes: 09d6775f50 ("riscv: Add support for userspace pointer masking")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20250507145230.2272871-1-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-05-08 12:01:01 +00:00
Alexandre Ghiti
e9d86b8e17 scripts: Do not strip .rela.dyn section
The .rela.dyn section contains runtime relocations and is only emitted
for a relocatable kernel.

riscv uses this section to relocate the kernel at runtime but that section
is stripped from vmlinux. That prevents kexec to successfully load vmlinux
since it does not contain the relocations info needed.

Fixes: 559d1e45a1 ("riscv: Use --emit-relocs in order to move .rela.dyn in init")
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250408072851.90275-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-05-08 12:01:01 +00:00
Nam Cao
ae08d55807 riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL
When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not
available, the kernel crashes:

Oops - illegal instruction [#1]
    [snip]
epc : set_tagged_addr_ctrl+0x112/0x15a
 ra : set_tagged_addr_ctrl+0x74/0x15a
epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10
    [snip]
status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002
    set_tagged_addr_ctrl+0x112/0x15a
    __riscv_sys_prctl+0x352/0x73c
    do_trap_ecall_u+0x17c/0x20c
    andle_exception+0x150/0x15c

Fix it by checking if Supm is available.

Fixes: 09d6775f50 ("riscv: Add support for userspace pointer masking")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20250504101920.3393053-1-namcao@linutronix.de
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-05-08 12:01:01 +00:00
Clément Léger
897e8aece3 riscv: misaligned: use get_user() instead of __get_user()
Now that we can safely handle user memory accesses while in the
misaligned access handlers, use get_user() instead of __get_user() to
have user memory access checks.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-4-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-05-08 12:00:58 +00:00
Clément Léger
453805f0a2 riscv: misaligned: enable IRQs while handling misaligned accesses
We can safely reenable IRQs if coming from userspace. This allows to
access user memory that could potentially trigger a page fault.

Fixes: b686ecdeac ("riscv: misaligned: Restrict user access to kernel memory")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-3-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-05-08 12:00:36 +00:00
Clément Léger
fd94de9f9e riscv: misaligned: factorize trap handling
Since both load/store and user/kernel should use almost the same path and
that we are going to add some code around that, factorize it.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-2-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-05-08 12:00:13 +00:00
Ulf Hansson
3611434467 pmdomain: Merge branch fixes into next
Merge the pmdomain fixes for v6.15-rc[n] into the next branch, to allow
them to get tested together with the new changes that are targeted for
v6.16.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-05-08 13:31:15 +02:00
Dan Carpenter
0f5757667e pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id()
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly.  The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.

Test for negative error codes first and then test if "index" is valid.

Fixes: 3ccf3f0cd1 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-05-08 13:29:30 +02:00
Dr. David Alan Gilbert
b3f737ae95 dma-buf/sw-sync: Remove unused debug code
sync_file_debug_add() and sync_file_debug_remove() have been unused
since 2016's
commit d4cab38e15 ("staging/android: prepare sync_file for de-staging")

Remove them.

Since sync_file_debug_add was the only thing to add to
sync_file_list_head, the code that dumps it in part of
sync_info_debugfs_show can be removed, and the declaration of
the list and it's associated lock can be removed.
(The 'fences:\n...' marker in that debugfs file is left in
so as not to change the output)

That leaves the sync_print_sync_file() helper unused, and
is thus removed.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250505233838.105668-1-linux@treblig.org
2025-05-08 12:51:59 +02:00
Gavin Shan
00b0300cf1 KVM: arm64: Drop sort_memblock_regions()
Drop sort_memblock_regions() and avoid sorting the copied memory
regions to be ascending order on their base addresses, because the
source memory regions should have been sorted correctly when they
are added by memblock_add() or its variants.

This is generally reverting commit a14307f531 ("KVM: arm64: Sort
the hypervisor memblocks"). No functional changes intended.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250311043718.91004-1-gshan@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-05-08 11:29:45 +01:00
Andi Shyti
10aba126bc MAINTAINERS: Remove entry for Seth Heasley
Seth's mails bounce back, remove his maintainership.

Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250505231511.3175151-1-andi.shyti@kernel.org
2025-05-08 12:08:56 +02:00
Thomas Gleixner
c855506257 genirq/cpuhotplug: Fix up lock guards conversion brainf..t
The lock guard conversion converted raw_spin_lock_irq() to
scoped_guard(raw_spinlock), which is obviously bogus and makes lockdep
mightily unhappy.

Note to self: Copy and pasta without using brain is a patently bad idea.

Fixes: 88a4df117a ("genirq/cpuhotplug: Convert to lock guards")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
2025-05-08 12:05:38 +02:00
Paolo Abeni
3c44b2d615 Merge branch 'virtio-net-fix-total-qstat-values'
Jakub Kicinski says:

====================
virtio-net: fix total qstat values

Another small fix discovered after we enabled virtio multi-queue
in netdev CI. The queue stat test fails:

  # Exception| Exception: Qstats are lower, fetched later
  not ok 3 stats.pkt_byte_sum

The queue stats from disabled queues are supposed to be reported
in the "base" stats.
====================

Link: https://patch.msgid.link/20250507003221.823267-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-08 11:56:14 +02:00
Jakub Kicinski
001160ec8c virtio-net: fix total qstat values
NIPA tests report that the interface statistics reported
via qstat are lower than those reported via ip link.
Looks like this is because some tests flip the queue
count up and down, and we end up with some of the traffic
accounted on disabled queues.

Add up counters from disabled queues.

Fixes: d888f04c09 ("virtio-net: support queue stat")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-08 11:56:12 +02:00
Jakub Kicinski
23fa6a23d9 net: export a helper for adding up queue stats
Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-08 11:56:12 +02:00
Kuninori Morimoto
7f3ef3ab81 ALSA: usb: mixer_us16x08: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87frhhaucf.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:35 +02:00
Kuninori Morimoto
f0fe4663cb ALSA: usb: mixer_quirks: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87h61xaucj.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:35 +02:00
Kuninori Morimoto
a25ed230e6 ALSA: pci: ali5451: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87ikmdauco.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:35 +02:00
Kuninori Morimoto
65468d1d3b ALSA: pci: asihpi: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87jz6taucs.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:35 +02:00
Kuninori Morimoto
9aedbdff5f ALSA: pci: au88x0: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87ldr9aucw.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:35 +02:00
Kuninori Morimoto
3abd2e168d ALSA: usb: mixer: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87msbpaud1.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:34 +02:00
Kuninori Morimoto
27c464a886 ALSA: usb: midi: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87o6w5aud5.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:34 +02:00
Kuninori Morimoto
483dd12dbe ALSA: pci: hda: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87plglauda.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:34 +02:00
Kuninori Morimoto
792f318e11 ALSA: virtio: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87r011audg.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:34 +02:00
Kuninori Morimoto
a6e8ecb2fb ALSA: core: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87selhaudp.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:34 +02:00
Kuninori Morimoto
ee4023b1ed ALSA: i2c: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87tt5xaudu.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:34 +02:00
Kuninori Morimoto
2086e63b9b ALSA: sh: use snd_kcontrol_chip()
We can use snd_kcontrol_chip(). Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/87v7qdaue4.wl-kuninori.morimoto.gx@renesas.com
2025-05-08 11:53:34 +02:00