ublk_get_iod() doesn't modify the struct ublk_queue it is passed.
Clarify that by making the argument a const pointer.
Move the function definition earlier in the file so it doesn't need a
forward declaration.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ubq_complete_io_cmd() doesn't interact with a ublk queue, so "ubq" in
the name is confusing. Most likely "ubq" was meant to be "ublk".
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the logic for the UBLK_IO_COMMIT_AND_FETCH_REQ opcode into its own
function. This also allows us to mark ublk_queue pointers as const for
that operation, which can help prevent data races since we may allow
concurrent operation on one ublk_queue in the future. Also open code
ublk_commit_completion in ublk_commit_and_fetch to reduce the number of
parameters/avoid a redundant lookup.
[Restore __ublk_ch_uring_cmd() req variable used in commit d6aa0c178b
("ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA")]
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_flush_plug_list() has a fast path if all requests in the plug
are destined for the same request_queue. It calls ->queue_rqs() with the
whole batch of requests, falling back on ->queue_rq() for any requests
not handled by ->queue_rqs(). However, if the requests are destined for
multiple queues, blk_mq_flush_plug_list() has a slow path that calls
blk_mq_dispatch_list() repeatedly to filter the requests by ctx/hctx.
Each queue's requests are inserted into the hctx's dispatch list under a
spinlock, then __blk_mq_sched_dispatch_requests() takes them out of the
dispatch list (taking the spinlock again), and finally
blk_mq_dispatch_rq_list() calls ->queue_rq() on each request.
Acquiring the hctx spinlock twice and calling ->queue_rq() instead of
->queue_rqs() makes the slow path significantly more expensive. Thus,
batching more requests into a single plug (e.g. io_uring_enter syscall)
can counterintuitively hurt performance by causing the plug to span
multiple queues. We have observed 2-3% of CPU time spent acquiring the
hctx spinlock alone on workloads issuing requests to multiple NVMe
devices in the same io_uring SQE batches.
Add a medium path in blk_mq_flush_plug_list() for plugs that don't have
elevators or come from a schedule, but do span multiple queues. Filter
the requests by queue and call ->queue_rqs()/->queue_rq() on the list of
requests destined to each request_queue.
With this change, we no longer see any CPU time spent in _raw_spin_lock
from blk_mq_flush_plug_list and throughput increases accordingly.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250426011728.4189119-4-csander@purestorage.com
[axboe: fix whitespace damage]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the logic from blk_mq_flush_plug_list() that calls
->queue_rqs() with a fallback to ->queue_rq() into a helper function
blk_mq_dispatch_queue_requests(). This is in preparation for using this
code with other lists of requests.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250426011728.4189119-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_plug_issue_direct(), __blk_mq_flush_plug_list(), and
blk_mq_dispatch_plug_list() take a struct blk_plug * but only use its
mq_list. Pass the struct rq_list * instead in preparation for calling
them with other lists of requests.
Drop "plug" from the function names as they are no longer plug-specific.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250426011728.4189119-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the list_for_each_entry_reverse() exits without hitting a break
then the list cursor points to invalid memory. So this check for
if (c2a->fixed) is checking bogus memory. Fix it by using a "found"
variable to track if we found what we were looking for or not.
The list head (i2c_atr_chan.alias_pairs) is not a full entry, it's just
a struct list_head. When the for loop runs to completion, c2a doesn't
point to a struct i2c_atr_alias_pair, so you can't access c2a->fixed.
Fixes: c3f5524188 ("i2c: Support dynamic address translation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Convert the internal counter type to atomic_long_t, which:
- doesn't change much for existing in-tree users as they are 32-bit anyway
(stm32/i.MX6)
- doesn't introduce performace penalty on 32-bit platforms
- provides 64-bit resolution on 64-bit platforms with virtually no
preformance penalty
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250331152222.2263776-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
When calling scnprintf() to append recovery method to event_string,
the second argument should be `sizeof(event_string) - len`, otherwise
there is a potential overflow problem.
Fixes: b7cf9f4ac1 ("drm: Introduce device wedged event")
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250409014633.31303-1-jiangfeng@kylinos.cn
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The PCIe reference clock required by the PCIe Endpoints connected to the
PCIe connector corresponding to the PCIe1 instance of PCIe on J784S4-EVM
and J742S2-EVM is driven by the ACSPCIE0 module. Add the device-tree
support for enabling the same.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422123218.3788223-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The ACSPCIE0 module on TI's J784S4 SoC is capable of driving the
reference clock required by the PCIe Endpoint device. It is an
alternative to on-board and external reference clock generators.
Add the device-tree node for the same.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422123218.3788223-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 and PCIe1 instances of PCIe in J742S2 and J784S4 SoCs support:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-8-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 instance of PCIe in J722S SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-7-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe1 instance of PCIe in J721S2 SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-6-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 and PCIe1 instances of PCIe in J721E SoC support:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-5-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 DAT1 and PCIe1 DAT1 are 4 GB address regions in the 64-bit
address space of the respective PCIe Controllers. Hence, update the
ranges to include them.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-4-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 instance of PCIe in J7200 SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCIe0 instance of PCIe in AM64 SoC supports:
1. 128 MB address region in the 32-bit address space
2. 4 GB address region in the 64-bit address space
The default configuration is that of a 128 MB address region in the
32-bit address space. While this might be sufficient for most use-cases,
it is insufficient for supporting use-cases which require larger address
spaces. Therefore, switch to using the 64-bit address space with a 4 GB
address region.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250422120042.3746004-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Remove disable-wp flag for eMMC nodes since this flag is
only applicable to SD according to the binding doc
(mmc/mmc-controller-common.yaml).
For eMMC, this flag should be ignored but lets remove
anyways to cleanup sdhci nodes.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
EMMC device is non-removable so add 'non-removable' DT
property to avoid having to redetect the eMMC after
suspend/resume.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The bootph-all flag was introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across
different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander
nodes, gpio nodes, and MMC nodes need to be present in all boot
stages, so add missing bootph-all phase flag to these nodes to
support SD boot and eMMC boot.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Christian Brauner <brauner@kernel.org> says:
Give userspace a way to instruct the kernel to install a pidfd for the
crashing process into the process started as a usermode helper. There's
still tricky race-windows that cannot be easily or sometimes not closed
at all by userspace. There's various ways like looking at the start time
of a process to make sure that the usermode helper process is started
after the crashing process but it's all very very brittle and fraught
with peril.
The crashed-but-not-reaped process can be killed by userspace before
coredump processing programs like systemd-coredump have had time to
manually open a PIDFD from the PID the kernel provides them, which means
they can be tricked into reading from an arbitrary process, and they run
with full privileges as they are usermode helper processes.
Even if that specific race-window wouldn't exist it's still the safest
and cleanest way to let the kernel provide the pidfd directly instead of
requiring userspace to do it manually. In parallel with this commit we
already have systemd adding support for this in [1].
When the usermode helper process is forked we install a pidfd file
descriptor three into the usermode helper's file descriptor table so
it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed yet and even if this @current isn't the actual thread-group
leader we know that the thread-group leader cannot be reaped until
@current has exited.
[1]: https://github.com/systemd/systemd/pull/37125
* patches from https://lore.kernel.org/20250414-work-coredump-v2-0-685bf231f828@kernel.org:
coredump: hand a pidfd to the usermode coredump helper
coredump: fix error handling for replace_fd()
pidfs: move O_RDWR into pidfs_alloc_file()
Link: https://lore.kernel.org/20250414-work-coredump-v2-0-685bf231f828@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].
We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.
Link: https://github.com/systemd/systemd/pull/37125 [1]
Link: https://lore.kernel.org/20250414-work-coredump-v2-3-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The replace_fd() helper returns the file descriptor number on success
and a negative error code on failure. The current error handling in
umh_pipe_setup() only works because the file descriptor that is replaced
is zero but that's pretty volatile. Explicitly check for a negative
error code.
Link: https://lore.kernel.org/20250414-work-coredump-v2-2-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since all pidfds must be O_RDWR currently enfore that directly in the
file allocation function itself instead of letting callers specify it.
Link: https://lore.kernel.org/20250414-work-coredump-v2-1-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nam Cao <namcao@linutronix.de> says:
While trying the coredump test on qemu-system-riscv64, I observed test
failures for various reasons.
This series makes the test works on qemu-system-riscv64.
* patches from https://lore.kernel.org/cover.1744383419.git.namcao@linutronix.de:
selftests: coredump: Raise timeout to 2 minutes
selftests: coredump: Fix test failure for slow machines
selftests: coredump: Properly initialize pointer
Link: https://lore.kernel.org/cover.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The test's runtime (nearly 20s) is dangerously close to the limit (30s) on
qemu-system-riscv64:
$ time ./stackdump_test > /dev/null
real 0m19.210s
user 0m0.077s
sys 0m0.359s
There could be machines slower than qemu-system-riscv64. Therefore raise
the test timeout to 2 minutes to be safe.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/dd636084d55e7828782728d087fa2298dcab1c8b.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The test waits for coredump to finish by busy-waiting for the stack_values
file to be created. The maximum wait time is 10 seconds.
This doesn't work for slow machine (qemu-system-riscv64), because coredump
takes longer.
Fix it by waiting for the crashing child process to finish first.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/ee657f3fc8e19657cf7aaa366552d6347728f371.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The buffer pointer "line" is not initialized. This pointer is passed to
getline().
It can still work if the stack is zero-initialized, because getline() can
work with a NULL pointer as buffer.
But this is obviously broken. This bug shows up while running the test on a
riscv64 machine.
Fix it by properly initializing the pointer.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/4fb9b6fb3e0040481bacc258c44b4aab5c4df35d.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
After commit 0a65bc27bd ("eventpoll: Set epoll timeout if it's in
the future"), the following program would immediately enter a busy
loop in the kernel:
```
int main() {
int e = epoll_create1(0);
struct epoll_event event = {.events = EPOLLIN};
epoll_ctl(e, EPOLL_CTL_ADD, 0, &event);
const struct timespec timeout = {.tv_nsec = 1};
epoll_pwait2(e, &event, 1, &timeout, 0);
}
```
This happens because the given (non-zero) timeout of 1 nanosecond
usually expires before ep_poll() is entered and then
ep_schedule_timeout() returns false, but `timed_out` is never set
because the code line that sets it is skipped. This quickly turns
into a soft lockup, RCU stalls and deadlocks, inflicting severe
headaches to the whole system.
When the timeout has expired, we don't need to schedule a hrtimer, but
we should set the `timed_out` variable. Therefore, I suggest moving
the ep_schedule_timeout() check into the `timed_out` expression
instead of skipping it.
brauner: Note that there was an earlier fix by Joe Damato in response to
my bug report in [1].
Fixes: 0a65bc27bd ("eventpoll: Set epoll timeout if it's in the future")
Cc: Joe Damato <jdamato@fastly.com>
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250429153419.94723-1-jdamato@fastly.com [1]
Link: https://lore.kernel.org/20250429185827.3564438-1-max.kellermann@ionos.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The ring buffer size varies across VMBus channels. The size of sysfs
node for the ring buffer is currently hardcoded to 4 MB. Userspace
clients either use fstat() or hardcode this size for doing mmap().
To address this, make the sysfs node size dynamic to reflect the
actual ring buffer size for each channel. This will ensure that
fstat() on ring sysfs node always returns the correct size of
ring buffer.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-3-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On regular bootup, devices get registered to VMBus first, so when
uio_hv_generic driver for a particular device type is probed,
the device is already initialized and added, so sysfs creation in
hv_uio_probe() works fine. However, when the device is removed
and brought back, the channel gets rescinded and the device again gets
registered to VMBus. However this time, the uio_hv_generic driver is
already registered to probe for that device and in this case sysfs
creation is tried before the device's kobject gets initialized
completely.
Fix this by moving the core logic of sysfs creation of ring buffer,
from uio_hv_generic to HyperV's VMBus driver, where the rest of the
sysfs attributes for the channels are defined. While doing that, make
use of attribute groups and macros, instead of creating sysfs
directly, to ensure better error handling and code flow.
Problematic path:
vmbus_process_offer (A new offer comes for the VMBus device)
vmbus_add_channel_work
vmbus_device_register
|-> device_register
| |...
| |-> hv_uio_probe
| |...
| |-> sysfs_create_bin_file (leads to a warning as
| the primary channel's kobject, which is used to
| create the sysfs file, is not yet initialized)
|-> kset_create_and_add
|-> vmbus_add_channel_kobj (initialization of the primary
channel's kobject happens later)
Above code flow is sequential and the warning is always reproducible in
this path.
Fixes: 9ab877a6cc ("uio_hv_generic: make ring buffer attribute for primary channel")
Cc: stable@kernel.org
Suggested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-2-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The folio_index() helper is only needed for mixed usage of page cache
and swap cache, for pure page cache usage, the caller can just use
folio->index instead.
It can't be a swap cache folio here. Swap mapping may only call into fs
through 'swap_rw' but btrfs does not use that method for swap.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 7e06de7c83.
Commit 7e06de7c83 ("btrfs: canonicalize the device path before adding
it") tries to make btrfs to use "/dev/mapper/*" name first, then any
filename inside "/dev/" as the device path.
This is mostly fine when there is only the root namespace involved, but
when multiple namespace are involved, things can easily go wrong for the
d_path() usage.
As d_path() returns a file path that is namespace dependent, the
resulted string may not make any sense in another namespace.
Furthermore, the "/dev/" prefix checks itself is not reliable, one can
still make a valid initramfs without devtmpfs, and fill all needed
device nodes manually.
Overall the userspace has all its might to pass whatever device path for
mount, and we are not going to win the war trying to cover every corner
case.
So just revert that commit, and do no extra d_path() based file path
sanity check.
CC: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/linux-fsdevel/20250115185608.GA2223535@zen.localdomain/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation for making the kmalloc() family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct folio **" but the returned type will be
"struct page **". These are the same allocation size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jakub Kicinski says:
====================
tools: ynl-gen: additional C types and classic netlink handling
This series is a bit of a random grab bag adding things we need
to generate code for rt-link.
First two patches are pretty random code cleanups.
Patch 3 adds default values if the spec is missing them.
Patch 4 adds support for setting Netlink request flags
(NLM_F_CREATE, NLM_F_REPLACE etc.). Classic netlink uses those
quite a bit.
Patches 5 and 6 extend the notification handling for variations
used in classic netlink. Patch 6 adds support for when notification
ID is the same as the ID of the response message to GET.
Next 4 patches add support for handling a couple of complex types.
These are supported by the schema and Python but C code gen wasn't
there.
Patch 11 is a bit of a hack, it skips code related to kernel
policy generation, since we don't need it for classic netlink.
Patch 12 adds support for having different fixed headers per op.
Something we could avoid in previous rtnetlink specs but some
specs do mix.
v2: https://lore.kernel.org/20250425024311.1589323-1-kuba@kernel.org
v1: https://lore.kernel.org/20250424021207.1167791-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250429154704.2613851-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rtnetlink has variety of ops with different fixed headers.
Detect that op fixed header is not the same as family one,
and use sizeof() directly. For reverse parsing we need to
pass the fixed header len along the policy (in the socket
state).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-13-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>