Maxime Chevallier says:
====================
net: stmmac: socfpga: 1000BaseX support and cleanups
This small series sorts-out 1000BaseX support and does a bit of cleanup
for the Lynx conversion.
Patch 1 makes sure that we set the right phy_mode when working in
1000BaseX mode, so that the internal GMII is configured correctly.
Patch 2 removes a check for phy_device upon calling fix_mac_speed(). As
the SGMII adapter may be chained to a Lynx PCS, checking for a
phy_device to be attached to the netdev before enabling the SGMII
adapter doesn't make sense, as we won't have a downstream PHY when using
1000BaseX.
Patch 3 cleans an unused field from the PCS conversion.
v1: https://lore.kernel.org/20250422094701.49798-1-maxime.chevallier@bootlin.com
v2: https://lore.kernel.org/20250423104646.189648-1-maxime.chevallier@bootlin.com
====================
Link: https://patch.msgid.link/20250424071223.221239-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dwmac-socfpga was converted to using the Lynx PCS (previously
referred to in the driver as the Altera TSE PCS), the
lynx_pcs_create_mdiodev() was used to create the pcs instance.
As this function didn't exist in the early versions of the series, a
local mdiodev object was stored for PCS creation. It was never used, but
still made it into the driver, so remove it.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250424071223.221239-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SGMII adapter needs to be enabled for both Cisco SGMII and 1000BaseX
operations. It doesn't make sense to check for an attached phydev here,
as we simply might not have any, in particular if we're using the
1000BaseX interface mode.
Make so that we only re-enable the SGMII adapter when it's present, and
when we use a phy_mode that is handled by said adapter.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250424071223.221239-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dwmac Socfpga may be used with an instance of a Lynx / Altera TSE PCS,
in which case it gains support for 1000BaseX.
It appears that the PCS is wired to the MAC through an internal GMII
bus. Make sure that we enable the GMII_MII mode for the internal MAC when
using 1000BaseX.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250424071223.221239-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restructure SRBDS to use select/apply functions to create consistent
vulnerability handling.
Define new AUTO mitigation for SRBDS.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-7-david.kaplan@amd.com
ACPICA commit 48e7c4cd893270dab8d05e6d75fbf23d0fcbb267
Commit a025731aec31 ("Restructure ACPI table files") restructed the
header files and moved lots of tables that are in the ACPI specification
to actbl2.h(e.g.: APIC/MADT, PCCT, PPTT, ..etc).
This restructure made the comment stating this header file contains tables
that are not in the ACPI specification incorrect. From that commit onwards
it has remained as stale. Let us get rid of it as it might be misleading.
Link: 48e7c4cd
Reported-by: Sahil Kaushal <sahil.kaushal@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6168200.lOV4Wx5bFT@rjwysocki.net
The functionality in md_clear_update_mitigation() and
md_clear_select_mitigation() is now integrated into the select/update
functions for the MDS, TAA, MMIO, and RFDS vulnerabilities.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-6-david.kaplan@amd.com
Commit 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and
policy->max") overlooked the fact that policy->min and policy->max were
accessed directly in cpufreq_frequency_table_target() and in the
functions called by it. Consequently, the changes made by that commit
led to problems with setting policy limits.
Address this by passing the target frequency limits to __resolve_freq()
and cpufreq_frequency_table_target() and propagating them to the
functions called by the latter.
Fixes: 7491cdf46b ("cpufreq: Avoid using inconsistent policy->min and policy->max")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Closes: https://lore.kernel.org/linux-pm/aAplED3IA_J0eZN0@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/5896780.DvuYhMxLoT@rjwysocki.net
The Radxa Rock 5B component placement document identifies the SPI Nor
Flash chip as 'U4300' which is described on page 25 of the Schematic
v1.45. There we can see that the VCC connector is connected to the
VCC_3V3_S3 power source.
This fixes the following warning:
spi-nor spi5.0: supply vcc not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As described on page 37 of PineTab2 Schematic-20230417, the SPI Flash's
VCC connector is connected to VCCIO_FLASH and according to page 6 of
that same schematic, that belongs to the VCC_1V8 power source.
This fixes the following warning:
spi-nor spi4.0: supply vcc not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As described on page 16 of the RockPro64 schematics for both v2.0 and
v2.1, the SPI Flash's VCC connector is connected to the VCC_3V0 power
source.
This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-3-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As described on page 6 of the Rock64 schematics for both v2.0 and v3.0
the SPI Flash's VCC connector is connected to the VCC_IO power source.
This fixes the following warning:
spi-nor spi0.0: supply vcc not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add vcc supply to the spi-nor flash chip on rk3399-roc-pc boards
according to the board schematics ROC-3399-PC-V10-A-20180804 to avoid
warnings in dmesg output.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/20250411140223.1069-1-m.reichl@fivetechno.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The ArmSoM Sige5 board exposes PCIe controller 0 on its M.2 slot on the
bottom of the board. Enable the necessary nodes for it, and also add the
correct pins for both the power enable GPIO and the PCIe reset GPIO.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250414-rk3576-sige5-pcie-v1-1-0e950a96f392@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PCIe1 and usb_drd1_dwc3 is sharing the same PHY on RK3576 platform.
For pcie1 slot and USB interface, there is a swich IC labelled as
Dial_Switch_1 on evb1 board. If we need to make pcie1 slot work for this
board, we should first disable usb_drd1_dwc3 and then set Dial_Switch_1
to low state.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1745371359-30443-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cool Pi CM5 GenBook equipped with a 1080P eDP panel, the panel
connected on board with 30/40 pin connector.
There is no hpd hooked up on the board, so we need to set
hpd-absent-delay-ms in dts.
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250426071554.1305042-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit adds the RTS signal, specifies the compatible Broadcom chip,
its clock source, interrupts, GPIOs for wakeup and shutdown, maximum speed,
pinctrl settings, and power supplies.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Link: https://lore.kernel.org/r/20250424-edge-v1-1-314aad01d9ab@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with Tiger RK3588 SoM.
The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.
It's main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet). To drive these components a number of
additional regulators are grouped on the adapter as well as a PCA9670
gpio-expander to provide the needed additional gpio-lines.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org> # Makefile
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250226140942.3825223-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Restructure RFDS mitigation to use select/update/apply functions to
create consistent vulnerability handling.
[ bp: Rename the oneline helper to what it checks. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-5-david.kaplan@amd.com
When testing sun8i-ss with multi_v7_defconfig, all CBC algorithm fail crypto
selftests.
This is strange since on sunxi_defconfig, everything was ok.
The problem was in the IV setup loop which never run because sg_dma_len
was 0.
Fixes: 359e893e8a ("crypto: sun8i-ss - rework handling of IV")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the generic part of skcipher walk into scatterwalk, and use
it to implement memcpy_sglist.
This makes memcpy_sglist do the right thing when two distinct SG
lists contain identical subsets (e.g., the AD part of AEAD).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct idxd_wq **", but the returned type will be
"struct wq **". These are the same size allocation (pointer sized), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace pm_runtime_get_sync() usage with pm_runtime_resume_and_get() to
simplify error handling.
This is recommended in the documentation of pm_runtime_get_sync():
/**
* pm_runtime_get_sync - Bump up usage counter of a device and resume it.
...
* Consider using pm_runtime_resume_and_get() instead of it, especially
* if its return value is checked by the caller, as this is likely to result
* in cleaner code.
...
*/
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add IS_ENABLED(CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG) checks before the
fallback counter updates to make sure the code is not included when
debugfs statistics support is not enabled.
Also, drop the existing ifdef guards, since 'struct sun8i_ce_alg_template'
is always defined, even with CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG disabled.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path.
Fixes: 06f751b613 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a helper to initialise crypto stack requests and use it for
ahash and acomp. Make sure that the flags field is initialised
fully in the helper to silence false-positive warnings from the
compiler.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504250751.mdy28Ibr-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the tx and rx queue number initialization is duplicated in
loongson_gmac_data() and loongson_gnet_data(), so move it to the common
function loongson_default_data().
This is a preparation for later patches.
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
Tested-by: Biao Dong <dongbiao@loongson.cn>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the Crypto API partial block handling.
The accelerated export format on x86/arm64 is easier to use so
switch the generic polyval algorithm to use that format instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not copy the exit function in crypto_clone_tfm as it should
only be set after init_tfm or clone_tfm has succeeded.
Move the setting into crypto_clone_ahash and crypto_clone_shash
instead.
Also clone the fb if necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the architecture-optimized Poly1305 kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_POLY1305 to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_POLY1305_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_POLY1305 directly. Finally, make the fallback to
the generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the architecture-optimized ChaCha kconfig symbols are defined
regardless of CRYPTO, there is no need for CRYPTO_LIB_CHACHA to select
CRYPTO. So, remove that. This makes the indirection through the
CRYPTO_LIB_CHACHA_INTERNAL symbol unnecessary, so get rid of that and
just use CRYPTO_LIB_CHACHA directly. Finally, make the fallback to the
generic implementation use a default value instead of a select; this
makes it consistent with how the arch-optimized code gets enabled and
also with how CRYPTO_LIB_BLAKE2S_GENERIC gets enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the x86 BLAKE2s, ChaCha, and Poly1305
library functions into a new directory arch/x86/lib/crypto/ that does
not depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the s390 ChaCha library functions into a
new directory arch/s390/lib/crypto/ that does not depend on CRYPTO.
This mirrors the distinction between crypto/ and lib/crypto/.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the riscv ChaCha library functions into
a new directory arch/riscv/lib/crypto/ that does not depend on CRYPTO.
This mirrors the distinction between crypto/ and lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the powerpc ChaCha and Poly1305 library
functions into a new directory arch/powerpc/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the mips ChaCha and Poly1305 library
functions into a new directory arch/mips/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the arm64 ChaCha and Poly1305 library
functions into a new directory arch/arm64/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>