Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
validate_xmit_xfrm checks whether a packet already passed through it on
the master device (xso.dev) and skips processing the skb again on the
slave device (xso.real_dev).
This check was added in commit [1] to avoid tx packets on a bond device
pass through xfrm twice and get two sets of headers, but the check was
soon obsoleted by commit [2], which was added around the same time to
fix a similar but unrelated problem. Commit [3] set XFRM_XMIT only when
packets are hw offloaded.
xso.dev is usually equal to xso.real_dev, unless bonding is used, in
which case the bonding driver uses xso.real_dev to manage offloaded xfrm
states.
Since commit [3], the check added in commit [1] is unused on all cases,
since packets going through validate_xmit_xfrm twice bail out on the
check added in commit [2]. Here's a breakdown of relevant scenarios:
1. ESP offload off: validate_xmit_xfrm returns early on !xo.
2. ESP offload on, no bond: skb->dev == xso.real_dev == xso.dev.
3. ESP offload on, bond, xs on bond dev: 1st pass adds XFRM_XMIT, 2nd
pass returns early on XFRM_XMIT.
3. ESP offload on, bond, xs on slave dev: 1st pass returns early on
!xo, 2nd pass adds XFRM_XMIT.
4. ESP offload on, bond, xs on both bond AND slave dev: only 1 offload
possible in secpath. Either 1st pass adds XFRM_XMIT and 2nd pass returns
early on XFRM_XMIT, or 1st pass is sw and returns early on !xo.
6. ESP offload on, crypto fallback triggered in esp_xmit/esp6_xmit: 1st
pass does sw crypto & secpath_reset, 2nd pass returns on !xo.
This commit removes the unnecessary check, so xso.real_dev becomes what
it is in practice: a private field managed by bonding driver.
The check immediately below that can be simplified as well.
[1] commit 272c2330ad ("xfrm: bail early on slave pass over skb")
[2] commit 94579ac3f6 ("xfrm: Fix double ESP trailer insertion in
IPsec crypto offload.")
[3] commit c7dbf4c088 ("xfrm: Provide private skb extensions for
segmented and hw offloaded ESP packets")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The policy offload struct was reused from the state offload and
real_dev was copied from dev, but it was never set to anything else.
Simplify the code by always using xdo.dev for policies.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xso.real_dev is the active device of an offloaded xfrm state and is
managed by bonding. As such, it's subject to change when states are
migrated to a new device. Using it in places other than
offloading/unoffloading the states is risky.
This commit saves the device into the driver-specific struct
mlx5e_ipsec_sa_entry and switches mlx5e_ipsec_init_macs() and
mlx5e_ipsec_netevent_event() to make use of it.
Additionally, mlx5e_xfrm_update_stats() used xso.real_dev to validate
that correct net locks are held. But in a bonding config, the net of the
master device is the same as the underlying devices, and the net is
already a local var, so use that instead.
The only remaining references to xso.real_dev are now in the
.xdo_dev_state_add() / .xdo_dev_state_delete() path.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The is_vram() is checking the current placement, however if we consider
exported VRAM with dynamic dma-buf, it looks possible for the xe driver
to async evict the memory, notifying the importer, however importer does
not have to call unmap_attachment() immediately, but rather just as
"soon as possible", like when the dma-resv idles. Following from this we
would then pipeline the move, attaching the fence to the manager, and
then update the current placement. But when the unmap_attachment() runs
at some later point we might see that is_vram() is now false, and take
the complete wrong path when dma-unmapping the sg, leading to
explosions.
To fix this check if the sgl was mapping a struct page.
v2:
- The attachment can be mapped multiple times it seems, so we can't
really rely on encoding something in the attachment->priv. Instead
see if the page_link has an encoded struct page. For vram we expect
this to be NULL.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4563
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250410162716.159403-2-matthew.auld@intel.com
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4765
Fixes: 0a98219bcc ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250414132539.26654-2-matthew.auld@intel.com
There is a spelling mistake in fs/xfs/xfs_log.c. Fix it.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add the pinctrl header file on MediaTek mt8196.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Signed-off-by: Cathy Xu <ot_cathy.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250414090215.16091-3-ot_cathy.xu@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac9: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Returning a negative error code in a function with an unsigned
return type is a pretty bad idea. It is probably worse when the
justification for the change is "our static analisys tool found it".
Fixes: cf7de25878 ("cppc_cpufreq: Fix possible null pointer dereference")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The original function name came from an overly compressed form of
'fpstate_regs' by commit:
e61d6310a0 ("x86/fpu: Reset permission and fpstate on exec()")
However, the term 'fpregs' typically refers to physical FPU registers. In
contrast, this function copies the init values to fpu->fpstate->regs, not
hardware registers.
Rename the function to better reflect what it actually does.
No functional change.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-11-chang.seok.bae@intel.com
The variable was previously referenced in KVM code but the last usage was
removed by:
ea4d6938d4 ("x86/fpu: Replace KVMs home brewed FPU copy from user")
Remove its export symbol.
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-10-chang.seok.bae@intel.com
The signal delivery logic was modified to always set the PKRU bit in
xregs_state->header->xfeatures by this commit:
ae6012d72f ("x86/pkeys: Ensure updated PKRU value is XRSTOR'd")
However, the change derives the bitmask value using XGETBV(1), rather
than simply updating the buffer that already holds the value. Thus, this
approach induces an unnecessary dependency on XGETBV1 for PKRU handling.
Eliminate the dependency by using the established helper function.
Subsequently, remove the now-unused 'mask' argument.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250416021720.12305-9-chang.seok.bae@intel.com
Currently, saving register states in the signal frame, the legacy feature
bits are always set in xregs_state->header->xfeatures. This code sequence
can be generalized for reuse in similar cases.
Refactor the logic to ensure a consistent approach across similar usages.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-8-chang.seok.bae@intel.com
Not all paths that lead to fpu__init_disable_system_xstate() currently
emit a message indicating that XSAVE has been disabled. Move the print
statement into the function to ensure the message in all cases.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250416021720.12305-7-chang.seok.bae@intel.com
The extended general-purpose registers for APX may contain random data,
which is currently assumed by the xstate testing framework. This allows
the testing of the new userspace feature using the common test code.
Invoke the test entry function from apx.c after enumerating the
state component and adding it to the support list
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-6-chang.seok.bae@intel.com
With securing APX against conflicting MPX, it is now ready to be enabled.
Include APX in the enabled xfeature set.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-5-chang.seok.bae@intel.com
XSTATE components are architecturally independent. There is no rule
requiring their offsets in the non-compacted format to be strictly
ascending or mutually non-overlapping. However, in practice, such
overlaps have not occurred -- until now.
APX is introduced as xstate component 19, following AMX. In the
non-compacted XSAVE format, its offset overlaps with the space previously
occupied by the now-deprecated MPX feature:
45fc24e89b ("x86/mpx: remove MPX from arch/x86")
To prevent conflicts, the kernel must ensure the CPU never expose both
features at the same time. If so, it indicates unreliable hardware. In
such cases, XSAVE should be disabled entirely as a precautionary measure.
Add a sanity check to detect this condition and disable XSAVE if an
invalid hardware configuration is identified.
Note: MPX state components remain enabled on legacy systems solely for
KVM guest support.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-4-chang.seok.bae@intel.com
Advanced Performance Extensions (APX) is associated with a new state
component number 19. To support saving and restoring of the corresponding
registers via the XSAVE mechanism, introduce the component definition
along with the necessary sanity checks.
Define the new component number, state name, and those register data
type. Then, extend the size checker to validate the register data type
and explicitly list the APX feature flag as a dependency for the new
component in xsave_cpuid_features[].
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-3-chang.seok.bae@intel.com
Intel Advanced Performance Extensions (APX) introduce a new set of
general-purpose registers, managed as an extended state component via the
xstate management facility.
Before enabling this new xstate, define a feature flag to clarify the
dependency in xsave_cpuid_features[]. APX is enumerated under CPUID level
7 with EDX=1. Since this CPUID leaf is not yet allocated, place the flag
in a scattered feature word.
While this feature is intended only for userspace, exposing it via
/proc/cpuinfo is unnecessary. Instead, the existing arch_prctl(2)
mechanism with the ARCH_GET_XCOMP_SUPP option can be used to query the
feature availability.
Finally, clarify that APX depends on XSAVE.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-2-chang.seok.bae@intel.com
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
mt7622-bananapi-bpi-r64.dtb: asm_sel: $nodename:0: 'asm_sel' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
Link: https://lore.kernel.org/r/20250115211801.194247-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
These fields are no longer needed, so remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86 Poly1305 code never falls back to the generic code, so selecting
CRYPTO_LIB_POLY1305_GENERIC is unnecessary.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
arch/mips/crypto/Kconfig is sourced only when CONFIG_MIPS is enabled, so
there is no need for options defined in that file to depend on it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following the example of the crc32, crc32c, and chacha code, make the
crypto subsystem register both generic and architecture-optimized
poly1305 shash algorithms, both implemented on top of the appropriate
library functions. This eliminates the need for every architecture to
implement the same shash glue code.
Note that the poly1305 shash requires that the key be prepended to the
data, which differs from the library functions where the key is simply a
parameter to poly1305_init(). Previously this was handled at a fairly
low level, polluting the library code with shash-specific code.
Reorganize things so that the shash code handles this quirk itself.
Also, to register the architecture-optimized shashes only when
architecture-optimized code is actually being used, add a function
poly1305_is_arch_optimized() and make each arch implement it. Change
each architecture's Poly1305 module_init function to arch_initcall so
that the CPU feature detection is guaranteed to run before
poly1305_is_arch_optimized() gets called by crypto/poly1305.c. (In
cases where poly1305_is_arch_optimized() just returns true
unconditionally, using arch_initcall is not strictly needed, but it's
still good to be consistent across architectures.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the Power10 optimized Poly1305 is only wired up to the
crypto_shash API, which makes it unavailable to users of the library
API. The crypto_shash API for Poly1305 is going to change to be
implemented on top of the library API, so the library API needs to be
supported. And of course it's needed anyway to serve the library users.
Therefore, change the Power10 optimized Poly1305 code to implement the
library API instead of the crypto_shash API.
Cc: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The block size of a hash algorithm is meant to be the number of
bytes its block function can handle. For cbcmac that should be
the block size of the underlying block cipher instead of one.
Set the block size of all cbcmac implementations accordingly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of relying on linux/module.h being included through the
header file sha512_base.h, include it directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardwrae is only capable of one hash at a time, so add a lock
to make sure that it isn't used concurrently.
Fixes: 7ecc3e3447 ("crypto: xilinx - Add Xilinx SHA3 driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow any ahash to be used with a stack request, with optional
dynamic allocation when async is needed. The intended usage is:
HASH_REQUEST_ON_STACK(req, tfm);
...
err = crypto_ahash_digest(req);
/* The request cannot complete synchronously. */
if (err == -EAGAIN) {
/* This will not fail. */
req = HASH_REQUEST_CLONE(req, gfp);
/* Redo operation. */
err = crypto_ahash_digest(req);
}
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As all users of the dynamic descsize have been converted to use
a static one instead, remove support for dynamic descsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than setting descsize in init_tfm, make it an algorithm
attribute and set it during instance construction.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the bit CRYPTO_ALG_DUP_FIRST is set, an algorithm will be
duplicated by kmemdup before registration. This is inteded for
hardware-based algorithms that may be unplugged at will.
Do not use this if the algorithm data structure is embedded in a
bigger data structure. Perform the duplication in the driver
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the asm/simd.h files have been made safe against double
inclusion, include it directly in internal/simd.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>