Commit graph

1,385,869 commits

Author SHA1 Message Date
Alexei Starovoitov
7bbb38f1f9 Merge branch 'support-skf_net_off-and-skf_ll_off-on-skb-frags'
Willem de Bruijn says:

====================
support SKF_NET_OFF and SKF_LL_OFF on skb frags

From: Willem de Bruijn <willemb@google.com>

Address a longstanding issue that may lead to missed packets
depending on system configuration.

Ensure that reading from packet contents works regardless of skb
geometry, also when using the special SKF_.. negative offsets to
offset from L2 or L3 header.

Patch 2 is the selftest for the fix.

v2->v3
  - do not remove bpf_internal_load_pointer_neg_helper, because it
    is still used in the sparc32 JIT

v1->v2
  - introduce bfp_skb_load_helper_convert_offset to avoid open
    coding
  - selftest: add comment why early demux must be disabled

v2: https://lore.kernel.org/netdev/20250404142633.1955847-1-willemdebruijn.kernel@gmail.com/
v1: https://lore.kernel.org/netdev/20250403140846.1268564-1-willemdebruijn.kernel@gmail.com/
====================

Link: https://patch.msgid.link/20250408132833.195491-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 20:02:52 -07:00
Willem de Bruijn
fcd7132cb1 selftests/net: test sk_filter support for SKF_NET_OFF on frags
Verify that a classic BPF linux socket filter correctly matches
packet contents. Including when accessing contents in an
skb_frag.

1. Open a SOCK_RAW socket with a classic BPF filter on UDP dport 8000.
2. Open a tap device with IFF_NAPI_FRAGS to inject skbs with frags.
3. Send a packet for which the UDP header is in frag[0].
4. Receive this packet to demonstrate that the socket accepted it.

Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250408132833.195491-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 20:02:51 -07:00
Willem de Bruijn
d4bac0288a bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.

This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.

    const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
    const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
    struct sock_filter filter_code[] = {
            BPF_STMT(BPF_LD  + BPF_B   + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
            BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
            BPF_STMT(BPF_LD  + BPF_B   + BPF_ABS, SKF_NET_OFF + offset_proto),
            BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
            BPF_STMT(BPF_LD  + BPF_H   + BPF_ABS, SKF_NET_OFF + offset_dport),

This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.

Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.

Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.

This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.

The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 20:02:51 -07:00
Alexei Starovoitov
690d43d3b3 Merge branch 'bpf-sockmap-fix-data-loss-and-panic-issues'
Jiayuan Chen says:

====================
bpf, sockmap: Fix data loss and panic issues

I was writing a benchmark based on sockmap + TCP and discovered several
issues:

1. When EAGAIN occurs, the direction of skb is incorrect, causing data
   loss when retry.
2. When sending partial data, the offset is not recorded, leading to
   duplicate data being sent when retry.
3. An unexpected BUG_ON() judgment in skb_linearize is triggered.
4. The memory of psock->ingress_skb is not limited by the socket buffer
   and memcg.

Issues 1, 2, and 3 are described in each patch's commit message.

Regarding issue 4, this patchset does not cover it as it is difficult to
handle in practice, and I am still working on it.

Here is a brief description of the issue:
When using sockmap to skb/stream redirect, if the receiving end does not
perform read operations, all data will be buffered in ingress_skb.

For example:
'''
// set memory limit to 50G
cgcreate -g memory:myGroup
cgset -r memory.max="5000M" myGroup

// start benchmark and disable consumer from reading
cgexec -g "memory:myGroup" ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --delay-consumer=-1 -d 100
Iter   0 ( 29.179us): Send Speed 2668.548 MB/s (20360.406 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
Iter   1 ( -7.237us): Send Speed 2694.467 MB/s (20557.149 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
Iter   2 ( -1.918us): Send Speed 2693.404 MB/s (20548.039 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
Iter   3 ( -0.684us): Send Speed 2693.138 MB/s (20548.014 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
Iter   4 (  7.879us): Send Speed 2698.620 MB/s (20588.838 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
Iter   5 ( -3.224us): Send Speed 2696.553 MB/s (20573.066 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
Iter   6 ( -5.409us): Send Speed 2699.705 MB/s (20597.111 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
Iter   7 ( -0.439us): Send Speed 2699.691 MB/s (20597.009 calls/s), ... Rcv Speed    0.000 MB/s (   0.000 calls/s)
...

// memory usage are not limited
cat /proc/slabinfo | grep skb
skbuff_small_head   11824024 11824024    704   46    8 : tunables    0    0    0 : slabdata 257044 257044      0
skbuff_fclone_cache 11822080 11822080    512   32    4 : tunables    0    0    0 : slabdata 369440 369440      0
'''
Thus, a simple socket in a large file upload/download model can eat the
entire OS memory.

We must charge the skb memory to psock->sk, and if we do not want losing
skb, we need to feedback the error info to read_sock/read_skb when the
enqueue operation of psock->ingress_skb fails.
---
My another patch related to stability also requires maintainers to spare
some time from their busy schedules for review.
https://lore.kernel.org/bpf/20250317092257.68760-1-jiayuan.chen@linux.dev/T/#t
====================

Link: https://patch.msgid.link/20250407142234.47591-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:59:00 -07:00
Jiayuan Chen
7b2fa44de5 selftest/bpf/benchs: Add benchmark for sockmap usage
Add TCP+sockmap-based benchmark.
Since sockmap's own update and delete operations are generally less
critical, the performance of the fast forwarding framework built upon
it is the key aspect.

Also with cgset/cgexec, we can observe the behavior of sockmap under
memory pressure.

The benchmark can be run with:
'''
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress
'''

In the future, we plan to move socket_helpers.h out of the prog_tests
directory to make it accessible for the benchmark. This will enable
better support for various socket types.

Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-5-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:59:00 -07:00
Jiayuan Chen
5ca2e29f68 bpf, sockmap: Fix panic when calling skb_linearize
The panic can be reproduced by executing the command:
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000

Then a kernel panic was captured:
'''
[  657.460555] kernel BUG at net/core/skbuff.c:2178!
[  657.462680] Tainted: [W]=WARN
[  657.463287] Workqueue: events sk_psock_backlog
...
[  657.469610]  <TASK>
[  657.469738]  ? die+0x36/0x90
[  657.469916]  ? do_trap+0x1d0/0x270
[  657.470118]  ? pskb_expand_head+0x612/0xf40
[  657.470376]  ? pskb_expand_head+0x612/0xf40
[  657.470620]  ? do_error_trap+0xa3/0x170
[  657.470846]  ? pskb_expand_head+0x612/0xf40
[  657.471092]  ? handle_invalid_op+0x2c/0x40
[  657.471335]  ? pskb_expand_head+0x612/0xf40
[  657.471579]  ? exc_invalid_op+0x2d/0x40
[  657.471805]  ? asm_exc_invalid_op+0x1a/0x20
[  657.472052]  ? pskb_expand_head+0xd1/0xf40
[  657.472292]  ? pskb_expand_head+0x612/0xf40
[  657.472540]  ? lock_acquire+0x18f/0x4e0
[  657.472766]  ? find_held_lock+0x2d/0x110
[  657.472999]  ? __pfx_pskb_expand_head+0x10/0x10
[  657.473263]  ? __kmalloc_cache_noprof+0x5b/0x470
[  657.473537]  ? __pfx___lock_release.isra.0+0x10/0x10
[  657.473826]  __pskb_pull_tail+0xfd/0x1d20
[  657.474062]  ? __kasan_slab_alloc+0x4e/0x90
[  657.474707]  sk_psock_skb_ingress_enqueue+0x3bf/0x510
[  657.475392]  ? __kasan_kmalloc+0xaa/0xb0
[  657.476010]  sk_psock_backlog+0x5cf/0xd70
[  657.476637]  process_one_work+0x858/0x1a20
'''

The panic originates from the assertion BUG_ON(skb_shared(skb)) in
skb_linearize(). A previous commit(see Fixes tag) introduced skb_get()
to avoid race conditions between skb operations in the backlog and skb
release in the recvmsg path. However, this caused the panic to always
occur when skb_linearize is executed.

The "--rx-strp 100000" parameter forces the RX path to use the strparser
module which aggregates data until it reaches 100KB before calling sockmap
logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize.

To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue.

'''
sk_psock_backlog:
    sk_psock_handle_skb
       skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue'
       sk_psock_skb_ingress____________
                                       ↓
                                       |
                                       | → sk_psock_skb_ingress_self
                                       |      sk_psock_skb_ingress_enqueue
sk_psock_verdict_apply_________________↑          skb_linearize
'''

Note that for verdict_apply path, the skb_get operation is unnecessary so
we add 'take_ref' param to control it's behavior.

Fixes: a454d84ee2 ("bpf, sockmap: Fix skb refcnt race after locking changes")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-4-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:59:00 -07:00
Jiayuan Chen
3b4f14b794 bpf, sockmap: fix duplicated data transmission
In the !ingress path under sk_psock_handle_skb(), when sending data to the
remote under snd_buf limitations, partial skb data might be transmitted.

Although we preserved the partial transmission state (offset/length), the
state wasn't properly consumed during retries. This caused the retry path
to resend the entire skb data instead of continuing from the previous
offset, resulting in data overlap at the receiver side.

Fixes: 405df89dd5 ("bpf, sockmap: Improved check for empty queue")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:58:59 -07:00
Jiayuan Chen
7683167196 bpf, sockmap: Fix data lost during EAGAIN retries
We call skb_bpf_redirect_clear() to clean _sk_redir before handling skb in
backlog, but when sk_psock_handle_skb() return EAGAIN due to sk_rcvbuf
limit, the redirect info in _sk_redir is not recovered.

Fix skb redir loss during EAGAIN retries by restoring _sk_redir
information using skb_bpf_set_redir().

Before this patch:
'''
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress
Setting up benchmark 'sockmap'...
create socket fd c1:13 p1:14 c2:15 p2:16
Benchmark 'sockmap' started.
Send Speed 1343.172 MB/s, BPF Speed 1343.238 MB/s, Rcv Speed   65.271 MB/s
Send Speed 1352.022 MB/s, BPF Speed 1352.088 MB/s, Rcv Speed   0 MB/s
Send Speed 1354.105 MB/s, BPF Speed 1354.105 MB/s, Rcv Speed   0 MB/s
Send Speed 1355.018 MB/s, BPF Speed 1354.887 MB/s, Rcv Speed   0 MB/s
'''
Due to the high send rate, the RX processing path may frequently hit the
sk_rcvbuf limit. Once triggered, incorrect _sk_redir will cause the flow
to mistakenly enter the "!ingress" path, leading to send failures.
(The Rcv speed depends on tcp_rmem).

After this patch:
'''
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress
Setting up benchmark 'sockmap'...
create socket fd c1:13 p1:14 c2:15 p2:16
Benchmark 'sockmap' started.
Send Speed 1347.236 MB/s, BPF Speed 1347.367 MB/s, Rcv Speed   65.402 MB/s
Send Speed 1353.320 MB/s, BPF Speed 1353.320 MB/s, Rcv Speed   65.536 MB/s
Send Speed 1353.186 MB/s, BPF Speed 1353.121 MB/s, Rcv Speed   65.536 MB/s
'''

Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:58:59 -07:00
Alexei Starovoitov
727d00a51f Merge branch 'bpf-fix-ktls-panic-with-sockmap-and-add-tests'
Jiayuan Chen says:

====================
bpf: fix ktls panic with sockmap and add tests

We can reproduce the issue using the existing test program:
'./test_sockmap --ktls'
Or use the selftest I provided, which will cause a panic:

------------[ cut here ]------------
kernel BUG at lib/iov_iter.c:629!

PKRU: 55555554
Call Trace:
 <TASK>
 ? die+0x36/0x90
 ? do_trap+0xdd/0x100
 ? iov_iter_revert+0x178/0x180
 ? iov_iter_revert+0x178/0x180
 ? do_error_trap+0x7d/0x110
 ? iov_iter_revert+0x178/0x180
 ? exc_invalid_op+0x50/0x70
 ? iov_iter_revert+0x178/0x180
 ? asm_exc_invalid_op+0x1a/0x20
 ? iov_iter_revert+0x178/0x180
 ? iov_iter_revert+0x5c/0x180
 tls_sw_sendmsg_locked.isra.0+0x794/0x840
 tls_sw_sendmsg+0x52/0x80
 ? inet_sendmsg+0x1f/0x70
 __sys_sendto+0x1cd/0x200
 ? find_held_lock+0x2b/0x80
 ? syscall_trace_enter+0x140/0x270
 ? __lock_release.isra.0+0x5e/0x170
 ? find_held_lock+0x2b/0x80
 ? syscall_trace_enter+0x140/0x270
 ? lockdep_hardirqs_on_prepare+0xda/0x190
 ? ktime_get_coarse_real_ts64+0xc2/0xd0
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0x90/0x170

1. It looks like the issue started occurring after bpf being introduced to
ktls and later the addition of assertions to iov_iter has caused a panic.
If my fix tag is incorrect, please assist me in correcting the fix tag.

2. I make minimal changes for now, it's enough to make ktls work
correctly.
---
v1->v2: Added more content to the commit message
https://lore.kernel.org/all/20250123171552.57345-1-mrpre@163.com/#r
---
====================

Link: https://patch.msgid.link/20250219052015.274405-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:57:14 -07:00
Jiayuan Chen
05ebde1bcb selftests/bpf: add ktls selftest
add ktls selftest for sockmap

Test results:
sockmap_ktls/sockmap_ktls disconnect_after_delete IPv4 SOCKMAP:OK
sockmap_ktls/sockmap_ktls update_fails_when_sock_has_ulp IPv4 SOCKMAP:OK
sockmap_ktls/sockmap_ktls disconnect_after_delete IPv4 SOCKMAP:OK
sockmap_ktls/sockmap_ktls update_fails_when_sock_has_ulp IPv4 SOCKMAP:OK
sockmap_ktls/sockmap_ktls disconnect_after_delete IPv4 SOCKMAP:OK
sockmap_ktls/sockmap_ktls update_fails_when_sock_has_ulp IPv4 SOCKMAP:OK
sockmap_ktls/sockmap_ktls disconnect_after_delete IPv4 SOCKMAP:OK
sockmap_ktls/sockmap_ktls update_fails_when_sock_has_ulp IPv4 SOCKMAP:OK
sockmap_ktls/tls simple offload:OK
sockmap_ktls/tls tx cork:OK
sockmap_ktls/tls tx cork with push:OK
sockmap_ktls/tls simple offload:OK
sockmap_ktls/tls tx cork:OK
sockmap_ktls/tls tx cork with push:OK
sockmap_ktls:OK

Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250219052015.274405-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:57:14 -07:00
Jiayuan Chen
54a3ecaeee bpf: fix ktls panic with sockmap
[ 2172.936997] ------------[ cut here ]------------
[ 2172.936999] kernel BUG at lib/iov_iter.c:629!
......
[ 2172.944996] PKRU: 55555554
[ 2172.945155] Call Trace:
[ 2172.945299]  <TASK>
[ 2172.945428]  ? die+0x36/0x90
[ 2172.945601]  ? do_trap+0xdd/0x100
[ 2172.945795]  ? iov_iter_revert+0x178/0x180
[ 2172.946031]  ? iov_iter_revert+0x178/0x180
[ 2172.946267]  ? do_error_trap+0x7d/0x110
[ 2172.946499]  ? iov_iter_revert+0x178/0x180
[ 2172.946736]  ? exc_invalid_op+0x50/0x70
[ 2172.946961]  ? iov_iter_revert+0x178/0x180
[ 2172.947197]  ? asm_exc_invalid_op+0x1a/0x20
[ 2172.947446]  ? iov_iter_revert+0x178/0x180
[ 2172.947683]  ? iov_iter_revert+0x5c/0x180
[ 2172.947913]  tls_sw_sendmsg_locked.isra.0+0x794/0x840
[ 2172.948206]  tls_sw_sendmsg+0x52/0x80
[ 2172.948420]  ? inet_sendmsg+0x1f/0x70
[ 2172.948634]  __sys_sendto+0x1cd/0x200
[ 2172.948848]  ? find_held_lock+0x2b/0x80
[ 2172.949072]  ? syscall_trace_enter+0x140/0x270
[ 2172.949330]  ? __lock_release.isra.0+0x5e/0x170
[ 2172.949595]  ? find_held_lock+0x2b/0x80
[ 2172.949817]  ? syscall_trace_enter+0x140/0x270
[ 2172.950211]  ? lockdep_hardirqs_on_prepare+0xda/0x190
[ 2172.950632]  ? ktime_get_coarse_real_ts64+0xc2/0xd0
[ 2172.951036]  __x64_sys_sendto+0x24/0x30
[ 2172.951382]  do_syscall_64+0x90/0x170
......

After calling bpf_exec_tx_verdict(), the size of msg_pl->sg may increase,
e.g., when the BPF program executes bpf_msg_push_data().

If the BPF program sets cork_bytes and sg.size is smaller than cork_bytes,
it will return -ENOSPC and attempt to roll back to the non-zero copy
logic. However, during rollback, msg->msg_iter is reset, but since
msg_pl->sg.size has been increased, subsequent executions will exceed the
actual size of msg_iter.
'''
iov_iter_revert(&msg->msg_iter, msg_pl->sg.size - orig_size);
'''

The changes in this commit are based on the following considerations:

1. When cork_bytes is set, rolling back to non-zero copy logic is
pointless and can directly go to zero-copy logic.

2. We can not calculate the correct number of bytes to revert msg_iter.

Assume the original data is "abcdefgh" (8 bytes), and after 3 pushes
by the BPF program, it becomes 11-byte data: "abc?de?fgh?".
Then, we set cork_bytes to 6, which means the first 6 bytes have been
processed, and the remaining 5 bytes "?fgh?" will be cached until the
length meets the cork_bytes requirement.

However, some data in "?fgh?" is not within 'sg->msg_iter'
(but in msg_pl instead), especially the data "?" we pushed.

So it doesn't seem as simple as just reverting through an offset of
msg_iter.

3. For non-TLS sockets in tcp_bpf_sendmsg, when a "cork" situation occurs,
the user-space send() doesn't return an error, and the returned length is
the same as the input length parameter, even if some data is cached.

Additionally, I saw that the current non-zero-copy logic for handling
corking is written as:
'''
line 1177
else if (ret != -EAGAIN) {
	if (ret == -ENOSPC)
		ret = 0;
	goto send_end;
'''

So it's ok to just return 'copied' without error when a "cork" situation
occurs.

Fixes: fcb14cb1bd ("new iov_iter flavour - ITER_UBUF")
Fixes: d3b18ad31f ("tls: add bpf support to sk_msg handling")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250219052015.274405-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09 19:57:13 -07:00
Mengyuan Lou
a9843689e2 net: txgbe: add sriov function support
Add sriov_configure for driver ops.
Add mailbox handler wx_msg_task for txgbe.

Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/ECDC57CF4F2316B9+20250408091556.9640-7-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:29:06 -07:00
Mengyuan Lou
877253d2cb net: ngbe: add sriov function support
Add sriov_configure for driver ops.
Add mailbox handler wx_msg_task for ngbe in
the interrupt handler.
Add the notification flow when the vfs exist.

Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/C9A0A43732966022+20250408091556.9640-6-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:29:06 -07:00
Mengyuan Lou
359e41f631 net: libwx: Add msg task func
Implement wx_msg_task which is used to process mailbox
messages sent by vf.

Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/8257B39B95CDB469+20250408091556.9640-5-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:29:06 -07:00
Mengyuan Lou
c52d4b8989 net: libwx: Redesign flow when sriov is enabled
Reallocate queue and int resources when sriov is enabled.
Redefine macro VMDQ to make it work in VT mode.

Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/64B616774ABE3C5A+20250408091556.9640-4-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:29:05 -07:00
Mengyuan Lou
9bfd65980f net: libwx: Add sriov api for wangxun nics
Implement sriov_configure interface for wangxun nics in libwx.
Enable VT mode and initialize vf control structure, when sriov
is enabled. Do not be allowed to disable sriov when vfs are
assigned.

Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/81EA45C21B0A98B0+20250408091556.9640-3-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:29:05 -07:00
Mengyuan Lou
29264a372d net: libwx: Add mailbox api for wangxun pf drivers
Implements the mailbox interfaces for wangxun pf drivers
ngbe and txgbe.

Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/70017BD4D67614A4+20250408091556.9640-2-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:29:05 -07:00
Linus Walleij
6a07e3af49 net: ethernet: cortina: Use TOE/TSO on all TCP
It is desireable to push the hardware accelerator to also
process non-segmented TCP frames: we pass the skb->len
to the "TOE/TSO" offloader and it will handle them.

Without this quirk the driver becomes unstable and lock
up and and crash.

I do not know exactly why, but it is probably due to the
TOE (TCP offload engine) feature that is coupled with the
segmentation feature - it is not possible to turn one
part off and not the other, either both TOE and TSO are
active, or neither of them.

Not having the TOE part active seems detrimental, as if
that hardware feature is not really supposed to be turned
off.

The datasheet says:

  "Based on packet parsing and TCP connection/NAT table
   lookup results, the NetEngine puts the packets
   belonging to the same TCP connection to the same queue
   for the software to process. The NetEngine puts
   incoming packets to the buffer or series of buffers
   for a jumbo packet. With this hardware acceleration,
   IP/TCP header parsing, checksum validation and
   connection lookup are offloaded from the software
   processing."

After numerous tests with the hardware locking up after
something between minutes and hours depending on load
using iperf3 I have concluded this is necessary to stabilize
the hardware.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250408-gemini-ethernet-tso-always-v1-1-e669f932359c@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:15:58 -07:00
Matthew Brost
29582e0ea7 drm/xe: Add page queue multiplier
For an unknown reason the math to determine the PF queue size does is
not correct - compute UMD applications are overflowing the PF queue
which is fatal. A multippier of 8 fixes the problem.

Fixes: 3338e4f90c ("drm/xe: Use topology to determine page fault queue size")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://lore.kernel.org/r/20250408155915.78770-1-matthew.brost@intel.com
2025-04-09 19:15:11 -07:00
Jakub Kicinski
330689f757 Merge branch 'bridge-prevent-unicast-arp-ns-packets-from-being-suppressed-by-bridge'
Amit Cohen says:

====================
bridge: Prevent unicast ARP/NS packets from being suppressed by bridge

Currently, unicast ARP requests/NS packets are replied by bridge when
suppression is enabled, then they are also forwarded, which results two
replicas of ARP reply/NA - one from the bridge and second from the target.

The purpose of ARP/ND suppression is to reduce flooding in the broadcast
domain, which is not relevant for unicast packets. In addition, the use
case of unicast ARP/NS is to poll a specific host, so it does not make
sense to have the switch answer on behalf of the host.

Forward ARP requests/NS packets and prevent the bridge from replying to
them.

Patch set overview:
Patch #1 prevents unicast ARP/NS packets from being suppressed by bridge
Patch #2 adds test cases for unicast ARP/NS with suppression enabled
====================

Link: https://patch.msgid.link/cover.1744123493.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:13:46 -07:00
Amit Cohen
0ffb594212 selftests: test_bridge_neigh_suppress: Test unicast ARP/NS with suppression
Add test cases to check that unicast ARP/NS packets are replied once, even
if ARP/ND suppression is enabled.

Without the previous patch:
$ ./test_bridge_neigh_suppress.sh
...
Unicast ARP, per-port ARP suppression - VLAN 10
-----------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast ARP, suppression on, h1 filter                        [FAIL]
TEST: Unicast ARP, suppression on, h2 filter                        [ OK ]

Unicast ARP, per-port ARP suppression - VLAN 20
-----------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast ARP, suppression on, h1 filter                        [FAIL]
TEST: Unicast ARP, suppression on, h2 filter                        [ OK ]
...
Unicast NS, per-port NS suppression - VLAN 10
---------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast NS, suppression on, h1 filter                         [FAIL]
TEST: Unicast NS, suppression on, h2 filter                         [ OK ]

Unicast NS, per-port NS suppression - VLAN 20
---------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast NS, suppression on, h1 filter                         [FAIL]
TEST: Unicast NS, suppression on, h2 filter                         [ OK ]
...
Tests passed: 156
Tests failed:   4

With the previous patch:
$ ./test_bridge_neigh_suppress.sh
...
Unicast ARP, per-port ARP suppression - VLAN 10
-----------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast ARP, suppression on, h1 filter                        [ OK ]
TEST: Unicast ARP, suppression on, h2 filter                        [ OK ]

Unicast ARP, per-port ARP suppression - VLAN 20
-----------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast ARP, suppression on, h1 filter                        [ OK ]
TEST: Unicast ARP, suppression on, h2 filter                        [ OK ]
...
Unicast NS, per-port NS suppression - VLAN 10
---------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast NS, suppression on, h1 filter                         [ OK ]
TEST: Unicast NS, suppression on, h2 filter                         [ OK ]

Unicast NS, per-port NS suppression - VLAN 20
---------------------------------------------
TEST: "neigh_suppress" is on                                        [ OK ]
TEST: Unicast NS, suppression on, h1 filter                         [ OK ]
TEST: Unicast NS, suppression on, h2 filter                         [ OK ]
...
Tests passed: 160
Tests failed:   0

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/dc240b9649b31278295189f412223f320432c5f2.1744123493.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:13:43 -07:00
Amit Cohen
827b2ac8e7 net: bridge: Prevent unicast ARP/NS packets from being suppressed by bridge
When Proxy ARP or ARP/ND suppression are enabled, ARP/NS packets can be
handled by bridge in br_do_proxy_suppress_arp()/br_do_suppress_nd().
For broadcast packets, they are replied by bridge, but later they are not
flooded. Currently, unicast packets are replied by bridge when suppression
is enabled, and they are also forwarded, which results two replicas of
ARP reply/NA - one from the bridge and second from the target.

RFC 1122 describes use case for unicat ARP packets - "unicast poll" -
actively poll the remote host by periodically sending a point-to-point ARP
request to it, and delete the entry if no ARP reply is received from N
successive polls.

The purpose of ARP/ND suppression is to reduce flooding in the broadcast
domain. If a host is sending a unicast ARP/NS, then it means it already
knows the address and the switches probably know it as well and there
will not be any flooding.

In addition, the use case of unicast ARP/NS is to poll a specific host,
so it does not make sense to have the switch answer on behalf of the host.

According to RFC 9161:
"A PE SHOULD reply to broadcast/multicast address resolution messages,
i.e., ARP Requests, ARP probes, NS messages, as well as DAD NS messages.
An ARP probe is an ARP Request constructed with an all-zero sender IP
address that may be used by hosts for IPv4 Address Conflict Detection as
specified in [RFC5227]. A PE SHOULD NOT reply to unicast address resolution
requests (for instance, NUD NS messages)."

Forward such requests and prevent the bridge from replying to them.

Reported-by: Denis Yulevych <denisyu@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/6bf745a149ddfe5e6be8da684a63aa574a326f8d.1744123493.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:13:43 -07:00
Kuniyuki Iwashima
0bb2f7a1ad net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]

Reproduction Steps:

  1) Mount CIFS
  2) Add an iptables rule to drop incoming FIN packets for CIFS
  3) Unmount CIFS
  4) Unload the CIFS module
  5) Remove the iptables rule

At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly.  However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.

At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.

  # ss -tan
  State      Recv-Q Send-Q Local Address:Port  Peer Address:Port
  FIN-WAIT-1 0      477        10.0.2.15:51062   10.0.0.137:445

  # lsmod | grep cifs
  cifs                 1159168  0

This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket.  Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.

While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().

Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.

Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class.  However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.

If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.

Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().

Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.

[0]:
CIFS_SERVER="10.0.0.137"
CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST"
DEV="enp0s3"
CRED="/root/WindowsCredential.txt"

MNT=$(mktemp -d /tmp/XXXXXX)
mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1

iptables -A INPUT -s ${CIFS_SERVER} -j DROP

for i in $(seq 10);
do
    umount ${MNT}
    rmmod cifs
    sleep 1
done

rm -r ${MNT}

iptables -D INPUT -s ${CIFS_SERVER} -j DROP

[1]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
...
Call Trace:
 <IRQ>
 __lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178)
 lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
 _raw_spin_lock_nested (kernel/locking/spinlock.c:379)
 tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
...

BUG: kernel NULL pointer dereference, address: 00000000000000c4
 PF: supervisor read access in kernel mode
 PF: error_code(0x0000) - not-present page
PGD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G        W          6.14.0 #36
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178)
Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44
RSP: 0018:ffa0000000468a10 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027
RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88
RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff
R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88
R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1
FS:  0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
 _raw_spin_lock_nested (kernel/locking/spinlock.c:379)
 tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
 ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
 ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234)
 ip_sublist_rcv_finish (net/ipv4/ip_input.c:576)
 ip_list_rcv_finish (net/ipv4/ip_input.c:628)
 ip_list_rcv (net/ipv4/ip_input.c:670)
 __netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986)
 netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129)
 napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496)
 e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815)
 __napi_poll.constprop.0 (net/core/dev.c:7191)
 net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382)
 handle_softirqs (kernel/softirq.c:561)
 __irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662)
 irq_exit_rcu (kernel/softirq.c:680)
 common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14))
  </IRQ>
 <TASK>
 asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744)
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202
RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5
RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 ? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
 default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
 do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
 cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1))
 start_secondary (arch/x86/kernel/smpboot.c:315)
 common_startup_64 (arch/x86/kernel/head_64.S:421)
 </TASK>
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CR2: 00000000000000c4

Fixes: ed07536ed6 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 19:11:55 -07:00
Eric Dumazet
229671ac60 net: remove cpu stall in txq_trans_update()
txq_trans_update() currently uses txq->xmit_lock_owner
to conditionally update txq->trans_start.

For regular devices, txq->xmit_lock_owner is updated
from HARD_TX_LOCK() and HARD_TX_UNLOCK(), and this apparently
causes cpu stalls.

Using dev->lltx, which sits in a read-mostly cache-line,
and already used in HARD_TX_LOCK() and HARD_TX_UNLOCK()
helps cpu prediction.

On an AMD EPYC 7B12 dual socket server, tcp_rr with 128 threads
and 30,000 flows gets a 5 % increase in throughput.

As explained in commit 95ecba62e2 ("net: fix races in
netdev_tx_sent_queue()/dev_watchdog()") I am planning
to no longer update txq->trans_start in the fast path
in a followup patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250408202742.2145516-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 18:03:31 -07:00
Ido Schimmel
6933cd4714 ipv6: Align behavior across nexthops during path selection
A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().

Commit 4d0ab3a688 ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.

When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').

Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.

Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Fixes: 4d0ab3a688 ("ipv6: Start path selection from the first nexthop")
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 18:00:06 -07:00
Wentao Liang
9c056ec6dd octeontx2-pf: Add error log forcn10k_map_unmap_rq_policer()
The cn10k_free_matchall_ipolicer() calls the cn10k_map_unmap_rq_policer()
for each queue in a for loop without checking for any errors.

Check the return value of the cn10k_map_unmap_rq_policer() function during
each loop, and report a warning if the function fails.

Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250408032602.2909-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:59:21 -07:00
Vladimir Oltean
fc75ea20ff net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:

1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
   their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.

For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.

Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:

	WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
		phydev->state != PHY_UP);

because the PHY state machine is running.

It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.

The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.

mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.

This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:

$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c

Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.

Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.

[1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/

Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:56:08 -07:00
Vladimir Oltean
f40a673d6b net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.

To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:56:08 -07:00
Stanislav Fomichev
311920774c configs/debug: run and debug PREEMPT
Recent change [0] resulted in a "BUG: using __this_cpu_read() in
preemptible" splat [1]. PREEMPT kernels have additional requirements
on what can and can not run with/without preemption enabled.
Expose those constrains in the debug kernels.

0: https://lore.kernel.org/netdev/20250314120048.12569-2-justin.iurman@uliege.be/
1: https://lore.kernel.org/netdev/20250402094458.006ba2a7@kernel.org/T/#mbf72641e9d7d274daee9003ef5edf6833201f1bc

Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250402172305.1775226-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:47:06 -07:00
Julian Vetter
1635eecdd2 net: ipvlan: remove __get_unaligned_cpu32 from ipvlan driver
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.

Signed-off-by: Julian Vetter <julian@outer-limits.org>
Link: https://patch.msgid.link/20250408091946.2266271-1-julian@outer-limits.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:29:14 -07:00
Julian Vetter
e4cb911780 net: remove __get_unaligned_cpu32 from macvlan driver
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.

Signed-off-by: Julian Vetter <julian@outer-limits.org>
Link: https://patch.msgid.link/20250408091548.2263911-1-julian@outer-limits.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:28:46 -07:00
Jakub Kicinski
f8cb38c32e Merge branch 'net-depend-on-instance-lock-for-queue-related-netlink-ops'
Jakub Kicinski says:

====================
net: depend on instance lock for queue related netlink ops

netdev-genl used to be protected by rtnl_lock. In previous release
we already switched the queue management ops (for Rx zero-copy) to
the instance lock. This series converts other ops to depend on the
instance lock when possible.

Unfortunately queue related state is hard to lock (unlike NAPI)
as the process of switching the number of queues usually involves
a large reconfiguration of the driver. The reconfig process has
historically been under rtnl_lock, but for drivers which opt into
ops locking it is also under the instance lock. Leverage that
and conditionally take rtnl_lock or instance lock depending
on the device capabilities.

v1: https://lore.kernel.org/20250407190117.16528-1-kuba@kernel.org
====================

Link: https://patch.msgid.link/20250408195956.412733-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:55 -07:00
Jakub Kicinski
ce7b149474 netdev: depend on netdev->lock for qstats in ops locked drivers
We mostly needed rtnl_lock in qstat to make sure the queue count
is stable while we work. For "ops locked" drivers the instance
lock protects the queue count, so we don't have to take rtnl_lock.

For currently ops-locked drivers: netdevsim and bnxt need
the protection from netdev going down while we dump, which
instance lock provides. gve doesn't care.

Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:52 -07:00
Jakub Kicinski
87eba404f2 docs: netdev: break down the instance locking info per ops struct
Explicitly list all the ops structs and what locking they provide.
Use "ops locked" as a term for drivers which have ops called under
the instance lock.

Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250408195956.412733-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:52 -07:00
Jakub Kicinski
99e44f39a8 netdev: depend on netdev->lock for xdp features
Writes to XDP features are now protected by netdev->lock.
Other things we report are based on ops which don't change
once device has been registered. It is safe to stop taking
rtnl_lock, and depend on netdev->lock instead.

Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:52 -07:00
Jakub Kicinski
03df156dd3 xdp: double protect netdev->xdp_flags with netdev->lock
Protect xdp_features with netdev->lock. This way pure readers
no longer have to take rtnl_lock to access the field.

This includes calling NETDEV_XDP_FEAT_CHANGE under the lock.
Looks like that's fine for bonding, the only "real" listener,
it's the same as ethtool feature change.

In terms of normal drivers - only GVE need special consideration
(other drivers don't use instance lock or don't support XDP).
It calls xdp_set_features_flag() helper from gve_init_priv() which
in turn is called from gve_reset_recovery() (locked), or prior
to netdev registration. So switch to _locked.

Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250408195956.412733-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:52 -07:00
Jakub Kicinski
d02e3b3882 netdev: don't hold rtnl_lock over nl queue info get when possible
Netdev queue dump accesses: NAPI, memory providers, XSk pointers.
All three are "ops protected" now, switch to the op compat locking.
rtnl lock does not have to be taken for "ops locked" devices.

Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:52 -07:00
Jakub Kicinski
4ec9031cbe netdev: add "ops compat locking" helpers
Add helpers to "lock a netdev in a backward-compatible way",
which for ops-locked netdevs will mean take the instance lock.
For drivers which haven't opted into the ops locking we'll take
rtnl_lock.

The scoped foreach is dropping and re-taking the lock for each
device, even if prev and next are both under rtnl_lock.
I hope that's fine since we expect that netdev nl to be mostly
supported by modern drivers, and modern drivers should also
opt into the instance locking.

Note that these helpers are mostly needed for queue related state,
because drivers modify queue config in their ops in a non-atomic
way. Or differently put, queue changes don't have a clear-cut API
like NAPI configuration. Any state that can should just use the
instance lock directly, not the "compat" hacks.

Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:51 -07:00
Jakub Kicinski
606048cbd8 net: designate XSK pool pointers in queues as "ops protected"
Read accesses go via xsk_get_pool_from_qid(), the call coming
from the core and gve look safe (other "ops locked" drivers
don't support XSK).

Write accesses go via xsk_reg_pool_at_qid() and xsk_clear_pool_at_qid().
Former is already under the ops lock, latter is not (both coming from
the workqueue via xp_clear_dev() and NETDEV_UNREGISTER via xsk_notifier()).

Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:51 -07:00
Jakub Kicinski
a82dc19db1 net: avoid potential race between netdev_get_by_index_lock() and netns switch
netdev_get_by_index_lock() performs following steps:

  rcu_lock();
  dev = lookup(netns, ifindex);
  dev_get(dev);
  rcu_unlock();
  [... lock & validate the dev ...]
  return dev

Validation right now only checks if the device is registered but since
the lookup is netns-aware we must also protect against the device
switching netns right after we dropped the RCU lock. Otherwise
the caller in netns1 may get a pointer to a device which has just
switched to netns2.

We can't hold the lock for the entire netns change process (because of
the NETDEV_UNREGISTER notifier), and there's no existing marking to
indicate that the netns is unlisted because of netns move, so add one.

AFAIU none of the existing netdev_get_by_index_lock() callers can
suffer from this problem (NAPI code double checks the netns membership
and other callers are either under rtnl_lock or not ns-sensitive),
so this patch does not have to be treated as a fix.

Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09 17:01:51 -07:00
Saket Kumar Bhaskar
967e8def11 selftests/bpf: Fix bpf_nf selftest failure
For systems with missing iptables-legacy tool this selftest fails.

Add check to find if iptables-legacy tool is available and skip the
test if the tool is missing.

Fixes: de9c8d848d ("selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250409095633.33653-1-skb99@linux.ibm.com
2025-04-09 16:29:39 -07:00
Tao Chen
a76116f422 bpf: Check link_create.flags parameter for multi_uprobe
The link_create.flags are currently not used for multi-uprobes, so return
-EINVAL if it is set, same as for other attach APIs.

We allow target_fd to have an arbitrary value for multi-uprobe, though,
as there are existing users (libbpf) relying on this.

Fixes: 89ae89f53d ("bpf: Add multi uprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250407035752.1108927-2-chen.dylane@linux.dev
2025-04-09 16:28:51 -07:00
Tao Chen
243911982a bpf: Check link_create.flags parameter for multi_kprobe
The link_create.flags are currently not used for multi-kprobes, so return
-EINVAL if it is set, same as for other attach APIs.

We allow target_fd, on the other hand, to have an arbitrary value for
multi-kprobe, as there are existing users (libbpf) relying on this.

Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250407035752.1108927-1-chen.dylane@linux.dev
2025-04-09 16:28:22 -07:00
Andrii Nakryiko
527b33dda1 Merge branch 'libbpf-introduce-line_info-and-func_info-getters'
Mykyta Yatsenko says:

====================
libbpf: introduce line_info and func_info getters

From: Mykyta Yatsenko <yatsenko@meta.com>

This patchset introduces new libbpf API getters that enable the retrieval
of .BTF.ext line and func info.
This change enables users to load bpf_program directly using bpf_prog_load,
bypassing the higher-level bpf_object__load API. Providing line and
function info is essential for BPF program verification in some cases.

v3 -> v5
 * Fix tests on s390x, nits.

v2 -> v3
 * Return ENOTSUPP if func or line info struct size differs from the one in
 uapi linux headers.
 * Add selftests.

v1 -> v2
 Move bpf_line_info_min and bpf_func_info_min from libbpf_internal.h to
 btf.h. Did not remove _min suffix, because there already are bpf_line_info
 and bpf_func_info structs in uapi/../bpf.h.
====================

Link: https://patch.msgid.link/20250408234417.452565-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2025-04-09 16:16:57 -07:00
Mykyta Yatsenko
b8390dd1e0 selftests/bpf: Add BTF.ext line/func info getter tests
Add selftests checking that line and func info retrieved by newly added
libbpf APIs are the same as returned by kernel via bpf_prog_get_info_by_fd.

Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408234417.452565-3-mykyta.yatsenko5@gmail.com
2025-04-09 16:16:56 -07:00
Mykyta Yatsenko
243d720e2e libbpf: Add getters for BTF.ext func and line info
Introducing new libbpf API getters for BTF.ext func and line info,
namely:
  bpf_program__func_info
  bpf_program__func_info_cnt
  bpf_program__line_info
  bpf_program__line_info_cnt

This change enables scenarios, when user needs to load bpf_program
directly using `bpf_prog_load`, instead of higher-level
`bpf_object__load`. Line and func info are required for checking BTF
info in verifier; verification may fail without these fields if, for
example, program calls `bpf_obj_new`.

Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408234417.452565-2-mykyta.yatsenko5@gmail.com
2025-04-09 16:16:56 -07:00
Mykyta Yatsenko
37b1b3ed20 selftests/bpf: Support struct/union presets in veristat
Extend commit e3c9abd0d1 ("selftests/bpf: Implement setting global
variables in veristat") to support applying presets to members of
the global structs or unions in veristat.
For example:
```
./veristat set_global_vars.bpf.o  -G "union1.struct3.var_u8_h = 0xBB"
```

Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408104544.140317-1-mykyta.yatsenko5@gmail.com
2025-04-09 16:16:12 -07:00
Shuicheng Lin
3ded92c439 drm/xe: remove unused LE_COS
The LE_COS definition missed passing the value parameter to
REG_FIELD_PREP. This didn't cause build errors because the entire
macro was unused.
The value for this field is universally "0" for every MOCS entry on
the old Xe_LP platforms, and the whole field has been removed from
Xe_HP onward. Just delete the line so that we don't have an unused
definition.

Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250405171539.599850-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-04-09 16:11:17 -07:00
Linus Torvalds
3b07108ada linux_kselftest-fixes-6.15-rc2
Fixes tpm2, futex, and mincore tests. Creates a dedicated .gitignore
 for tpm2
 
 Details:
 
 selftests: tpm2: test_smoke: use POSIX-conformant expression operator
 selftests/futex: futex_waitv wouldblock test should fail
 selftests: tpm2: create a dedicated .gitignore
 selftests/mincore: Allow read-ahead pages to reach the end of the file
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmf271sACgkQCwJExA0N
 QxwvzxAAxdXGz11IfpCzIXQFZvAdcl+LYWEhfZ8hZg9O3xjLT3ULhzJ7MXVeGME1
 UagfjOeY9ZWMKspj2bIt3BRs5figTklTb/KAZ9fRv+3BHkflCF3TZNoJQTQGghi0
 7oMfQt6lwVIEOvLc6XZY4+xRabIPW57TAkzaQkUhSlyC68jwch90MC1JHCUibC+t
 92zc2VkVzdA9rmyiNXtnd9vTpsJyKGTXipUr+JsMlsoewd0U0bBu0nrxrgldwcEQ
 J7yi3OnuTmXIlQMTEdc3EDdXEEdKBK9+uGFHNQ1zQNgv46l6Wl9Px880iqPrb8Gx
 gJ6g2KNR30zXOFqaGIIANfUnlrnCV/nFFVHQB5k64oMDYonCX74JLtBBbNOpwgim
 dyxzMmCi5ldI6o1FsjJxfOCQPQfNnLMJsCM8LQhuVcU0c6TbTTmjY671A2oqMU42
 mKDDJg5ecNWNRbdwbgQnl7YSX4tuzBtgQhlGjUzk1mlwSGIMUJ/ep0D+bGh7OPQk
 4/p3Js3XPW+lu+gyxPuQkHstQS/esFuFZ9nZrgrdTBLM7wzngYEvQ8mOji4vpuFT
 f0WBRm29aIL8nz9oVtsYjYJxE+DayNk8foAAsFj4h0Ppo8Fg4wJ6IxLgWD5njfSa
 Z4RBMqVVvYrx58pwgxQ5nyyIpeWqQKFUxK6dAZKnvOj+J8/Xsvs=
 =KUYx
 -----END PGP SIGNATURE-----

Merge tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

 - Fixes tpm2, futex, and mincore tests

 - Create a dedicated .gitignore for tpm2 tests

* tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/mincore: Allow read-ahead pages to reach the end of the file
  selftests/futex: futex_waitv wouldblock test should fail
  selftests: tpm2: test_smoke: use POSIX-conformant expression operator
  selftests: tpm2: create a dedicated .gitignore
2025-04-09 16:02:44 -07:00
Markus Burri
353bdd7d14 Input: matrix_keypad - detect change during scan
For a setup where the matrix keypad is connected over a slow interface
(e.g. a gpio-expansion over i2c), the scan can take a longer time to read.

Interrupts need to be disabled during scan. And therefore changes in this
period are not detected.
To improve this situation, scan the matrix again if the row state changed
during interrupts disabled.
The rescan is repeated until no change is detected anymore.

Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-4-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-04-09 14:21:46 -07:00