The VHOST_[GS]ET_FEATURES_ARRAY ioctl already took 0x83 and it would
result in a build error when the vhost uapi header is used for perf tool
build like below.
In file included from trace/beauty/ioctl.c:93:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c: In function ‘ioctl__scnprintf_vhost_virtio_cmd’:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: error: initialized field overwritten [-Werror=override-init]
36 | [0x83] = "SET_FORK_FROM_OWNER",
| ^~~~~~~~~~~~~~~~~~~~~
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: note: (near initialization for ‘vhost_virtio_ioctl_cmds[131]’)
Fixes: 7d9896e9f6 ("vhost: Reintroduce kthread API and add mode selection")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20250819063958.833770-1-namhyung@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The commit 206cc44588 ("virtio: reject shm region if length is zero")
breaks the Virtio-gpu `host_visible` feature.
As you can see in the snippet below, host_visible_region is zero because
of the `kzalloc`. It's using the `vm_get_shm_region`
(drivers/virtio/virtio_mmio.c:536) to read the `addr` and `len` from
qemu/crosvm.
```
drivers/gpu/drm/virtio/virtgpu_kms.c
132 vgdev = drmm_kzalloc(dev, sizeof(struct virtio_gpu_device), GFP_KERNEL);
[...]
177 if (virtio_get_shm_region(vgdev->vdev, &vgdev->host_visible_region,
178 VIRTIO_GPU_SHM_ID_HOST_VISIBLE)) {
```
Now it always fails.
To fix, revert the offending commit.
Fixes: 206cc44588 ("virtio: reject shm region if length is zero")
Signed-off-by: Igor Torrente <igor.torrente@collabora.com>
Message-Id: <20250807124145.81816-1-igor.torrente@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When operating on struct vhost_net_ubuf_ref, the following execution
sequence is theoretically possible:
CPU0 is finalizing DMA operation CPU1 is doing VHOST_NET_SET_BACKEND
// ubufs->refcount == 2
vhost_net_ubuf_put() vhost_net_ubuf_put_wait_and_free(oldubufs)
vhost_net_ubuf_put_and_wait()
vhost_net_ubuf_put()
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 1
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 0
wait_event(ubufs->wait, !atomic_read(&ubufs->refcount));
// no wait occurs here because condition is already true
kfree(ubufs);
if (unlikely(!r))
wake_up(&ubufs->wait); // use-after-free
This leads to use-after-free on ubufs access. This happens because CPU1
skips waiting for wake_up() when refcount is already zero.
To prevent that use a read-side RCU critical section in vhost_net_ubuf_put(),
as suggested by Hillf Danton. For this lock to take effect, free ubufs with
kfree_rcu().
Cc: stable@vger.kernel.org
Fixes: 0ad8b480d6 ("vhost: fix ref cnt checking deadlock")
Reported-by: Andrey Ryabinin <arbn@yandex-team.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Message-Id: <20250805130917.727332-1-kniv@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes misleading comments in both legacy and modern
virtio-pci device implementations. The comments previously referred to
the "config vector" for parameters and return values of the
`vp_legacy_queue_vector()` and `vp_modern_queue_vector()` functions,
which is incorrect.
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Message-Id: <20250731092757.1000-1-liming.wu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Fix a memory leak for of_pci_add_properties() failure case. Then fix
the introduced UAF.
- Add missing IORESOURCE_MEM flag on of_reserved_mem_region_to_resource()
- Add already in use vendor prefix "eswin"
- Clarify "of of" comment in of_match_device(). After many years of
drive-by patches dropping the 2nd "of" (which referred to
OpenFirmware), a correct patch finally arrived.
-----BEGIN PGP SIGNATURE-----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=0m5V
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a memory leak for of_pci_add_properties() failure case. Then fix
the introduced UAF.
- Add missing IORESOURCE_MEM flag on of_reserved_mem_region_to_resource()
- Add already in use vendor prefix "eswin"
- Clarify "of of" comment in of_match_device(). After many years of
drive-by patches dropping the 2nd "of" (which referred to
OpenFirmware), a correct patch finally arrived
* tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: dynamic: Fix use after free in of_changeset_add_prop_helper()
dt-bindings: vendor-prefixes: add eswin
of: reserved_mem: Add missing IORESOURCE_MEM flag on resources
of: dynamic: Fix memleak when of_pci_add_properties() failed
of: Clarify OF device context in of_match_device() comment
`McstFramesRcvdOk` counts the number of received multicast packets, and
it reports the value correctly.
However, reading `McstFramesRcvdOk` clears the register to zero. As a
result, the driver was reporting only the packets since the last read,
instead of the accumulated total.
Fix this by updating the multicast statistics accumulatively instaed of
instantaneously.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250823182927.6063-3-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before configuring the NIX block, the AF driver initiates the
"NIX block X2P bus calibration" and verifies that NIX interfaces
such as CGX and LBK are active and functioning correctly.
On few silicon variants(CNF10KA and CNF10KB), X2P calibration failures
have been observed on some CGX blocks that are not mapped to the NIX block.
Since both NIX-mapped and non-NIX-mapped CGX blocks share the same
VENDOR,DEVICE,SUBSYS_DEVID, it's not possible to skip probe based on
these parameters.
This patch introuduces "is_cgx_mapped_to_nix" API to detect and skip
probe of non NIX mapped CGX blocks.
Fixes: aba53d5dbc ("octeontx2-af: NIX block admin queue init")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250822105805.2236528-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4edf1505b7 ("ata: ahci: Disallow LPM policy control for
external ports") introduced disabling link power management (LPM) for
ports that are advertized as external/hotplug capable. This is necessary
to force the maximum power policy (ATA_LPM_MAX_POWER) onto the port link
to ensure that the hotplug capability of the port is functional.
However, doing so blindly for all ports can prevent systems from going
into a low power state, even if the external/hotplug ports on the system
are unused. E.g., a laptop may see the internal SATA slot of a docking
station as an external hotplug capable port, and in such case, the user
may prefer to not use the port and to favor instead enabling LPM
to allow the laptop to transition to low power states.
Since there is no easy method to automatically detect such choice,
introduce the new mask_port_ext module parameter to allow a user to
ignore the external/hotplug capability of a port. The format for this
parameter value is identical to the format used for the mask_port_map
parameter: a mask can be defined for all AHCI adapters of a system or
for a particular adapters identified with their PCI IDs (bus:dev.func
format).
The function ahci_get_port_map_mask() is renamed to ahci_get_port_mask()
and modified to return a mask, either for the port map mask of an
adapter (to ignore ports) or for the external/hotplug capability of an
adapter. Differentiation between map_port_mask and map_port_ext_mask is
done by passing the parameter string to ahci_get_port_mask() as a second
argument.
To be consistent with this change, the function
ahci_apply_port_map_mask() is renamed ahci_port_mask() and changed to
return a mask value.
The mask for the external/hotplug capability for an adapter, if defined
by the map_port_ext_mask parameter, is stored in the new field
mask_port_ext of struct ahci_host_priv. ahci_mark_external_port() is
modified to not set the ATA_PFLAG_EXTERNAL flag for a port if
hpriv->mask_port_ext includes the number of the port. In such case,
an information message is printed to notify that the external/hotplug
capability is being ignored.
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220465
Fixes: 4edf1505b7 ("ata: ahci: Disallow LPM policy control for external ports")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Dieter Mummenschanz <dmummenschanz@web.de>
When synthesizing build-ids, for build ID mmap2 events, they will be
added for data mmaps if -d/--data is specified. The files opened for
their build IDs may block on the open causing perf to hang during
synthesis. There is some robustness in existing calls to
filename__read_build_id by checking the file path is to a regular
file, which unfortunately fails for symlinks. Rather than adding more
is_regular_file calls, switch filename__read_build_id to take a
"block" argument and specify O_NONBLOCK when this is false. The
existing is_regular_file checking callers and the event synthesis
callers are made to pass false and thereby avoiding the hang.
Fixes: 53b00ff358 ("perf record: Make --buildid-mmap the default")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250823000024.724394-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The e_ident is part of the ehdr and so reading it a second time would
mean the read ehdr was displaced by 16-bytes. Switch from stdio to
open/read/lseek syscalls for similarity with the symbol-elf version of
the function and so that later changes can alter then open flags.
Fixes: fef8f648bb ("perf symbol: Fix use-after-free in filename__read_build_id")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250823000024.724394-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Both MSM8956 and MSM8976 have MDSS 1.11 which doesn't support UBWC
(although they also have Adreno 510, which might support UBWC). Disable
UBWC support for those platforms.
Fixes: 1924272b9c ("soc: qcom: Add UBWC config provider")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668503/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
MSM8929 is similar to MSM8939, it doesn't support UBWC. Provide no-UBWC
config for the platform.
Fixes: 197713d0cf ("soc: qcom: ubwc: provide no-UBWC configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668502/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add UBWC configuration for SDA660 (modem-less variant of SDM660), SDM450
(similar to MSM8953), SDM632 (similar to MSM8953) and SM7325 (similar to
SC7280).
Fixes: 1924272b9c ("soc: qcom: Add UBWC config provider")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668501/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
MSM8917 has MDSS 1.15 and Adreno 308, neither of which support UBWC.
Change UBWC configuration to point out that UBWC is not supported on
this platform.
Fixes: 1924272b9c ("soc: qcom: Add UBWC config provider")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668500/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The drm_atomic_get_new_connector_state() can return NULL if the
connector is not part of the atomic state. Add a check to prevent
a NULL pointer dereference.
This follows the same pattern used in dpu_encoder_update_topology()
within the same file, which checks for NULL before using conn_state.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 1ce69c265a ("drm/msm/dpu: move resource allocation to CRTC")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/665188/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
None of MDP5 platforms have a LUT clock on the display-controller, it
was added by the mistake. Drop it, fixing DT warnings on MSM8976 /
MSM8956 platforms. Technically it's an ABI break, but no other platforms
are affected.
Fixes: 385c8ac763 ("dt-bindings: display/msm: convert MDP5 schema to YAML format")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/667822/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Because snd_dmaengine_pcm is sharing same dev with CPU and Platform,
snd_soc_lookup_component_nolocked() might be call with NULL driver name
(= CPU). This patch fixup and cleanup it.
Fix a bug where the driver's event subscription logic for SRQ-related
events incorrectly sets obj_type for RMP objects.
When subscribing to SRQ events, get_legacy_obj_type() did not handle
the MLX5_CMD_OP_CREATE_RMP case, which caused obj_type to be 0
(default).
This led to a mismatch between the obj_type used during subscription
(0) and the value used during notification (1, taken from the event's
type field). As a result, event mapping for SRQ objects could fail and
event notification would not be delivered correctly.
This fix adds handling for MLX5_CMD_OP_CREATE_RMP in get_legacy_obj_type,
returning MLX5_EVENT_QUEUE_TYPE_RQ so obj_type is consistent between
subscription and notification.
Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://patch.msgid.link/r/8f1048e3fdd1fde6b90607ce0ed251afaf8a148c.1755088962.git.leon@kernel.org
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current layout of struct ixgbe_orom_civd_info causes incorrect data
storage due to compiler-inserted padding. This results in issues when
writing OROM data into the structure.
Add the __packed attribute to ensure the structure layout matches the
expected binary format without padding.
Fixes: 70db0788a2 ("ixgbe: read the OROM version information")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the driver increments `alloc_page_failed` when buffer allocation fails
in `ice_clean_rx_irq()`. However, this counter is intended for page allocation
failures, not buffer allocation issues.
This patch corrects the counter by incrementing `alloc_buf_failed` instead,
ensuring accurate statistics reporting for buffer allocation failures.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_adapter structure is used by the ice driver to connect multiple
physical functions of a device in software. It was introduced by
commit 0e2bddf9e5 ("ice: add ice_adapter for shared data across PFs on
the same NIC") and is primarily used for PTP support, as well as for
handling certain cross-PF synchronization.
The original design of ice_adapter used PCI address information to
determine which devices should be connected. This was extended to support
E825C devices by commit fdb7f54700 ("ice: Initial support for E825C
hardware in ice_adapter"), which used the device ID for E825C devices
instead of the PCI address.
Later, commit 0093cb194a ("ice: use DSN instead of PCI BDF for
ice_adapter index") replaced the use of Bus/Device/Function addressing with
use of the device serial number.
E825C devices may appear in "Dual NAC" configuration which has multiple
physical devices tied to the same clock source and which need to use the
same ice_adapter. Unfortunately, each "NAC" has its own NVM which has its
own unique Device Serial Number. Thus, use of the DSN for connecting
ice_adapter does not work properly. It "worked" in the pre-production
systems because the DSN was not initialized on the test NVMs and all the
NACs had the same zero'd serial number.
Since we cannot rely on the DSN, lets fall back to the logic in the
original E825C support which used the device ID. This is safe for E825C
only because of the embedded nature of the device. It isn't a discreet
adapter that can be plugged into an arbitrary system. All E825C devices on
a given system are connected to the same clock source and need to be
configured through the same PTP clock.
To make this separation clear, reserve bit 63 of the 64-bit index values as
a "fixed index" indicator. Always clear this bit when using the device
serial number as an index.
For E825C, use a fixed value defined as the 0x579C E825C backplane device
ID bitwise ORed with the fixed index indicator. This is slightly different
than the original logic of just using the device ID directly. Doing so
prevents a potential issue with systems where only one of the NACs is
connected with an external PHY over SGMII. In that case, one NAC would
have the E825C_SGMII device ID, but the other would not.
Separate the determination of the full 64-bit index from the 32-bit
reduction logic. Provide both ice_adapter_index() and a wrapping
ice_adapter_xa_index() which handles reducing the index to a long on 32-bit
systems. As before, cache the full index value in the adapter structure to
warn about collisions.
This fixes issues with E825C not initializing PTP on both NACs, due to
failure to connect the appropriate devices to the same ice_adapter.
Fixes: 0093cb194a ("ice: use DSN instead of PCI BDF for ice_adapter index")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_cfg_tx_topo function attempts to apply Tx scheduler topology
configuration based on NVM parameters, selecting either a 5 or 9 layer
topology.
As part of this flow, the driver acquires the "Global Configuration Lock",
which is a hardware resource associated with programming the DDP package
to the device. This "lock" is implemented by firmware as a way to
guarantee that only one PF can program the DDP for a device. Unlike a
traditional lock, once a PF has acquired this lock, no other PF will be
able to acquire it again (including that PF) until a CORER of the device.
Future requests to acquire the lock report that global configuration has
already completed.
The following flow is used to program the Tx topology:
* Read the DDP package for scheduler configuration data
* Acquire the global configuration lock
* Program Tx scheduler topology according to DDP package data
* Trigger a CORER which clears the global configuration lock
This is followed by the flow for programming the DDP package:
* Acquire the global configuration lock (again)
* Download the DDP package to the device
* Release the global configuration lock.
However, if configuration of the Tx topology fails, (i.e.
ice_get_set_tx_topo returns an error code), the driver exits
ice_cfg_tx_topo() immediately, and fails to trigger CORER.
While the global configuration lock is held, the firmware rejects most
AdminQ commands, as it is waiting for the DDP package download (or Tx
scheduler topology programming) to occur.
The current driver flows assume that the global configuration lock has been
reset by CORER after programming the Tx topology. Thus, the same PF
attempts to acquire the global lock again, and fails. This results in the
driver reporting "an unknown error occurred when loading the DDP package".
It then attempts to enter safe mode, but ultimately fails to finish
ice_probe() since nearly all AdminQ command report error codes, and the
driver stops loading the device at some point during its initialization.
The only currently known way that ice_get_set_tx_topo() can fail is with
certain older DDP packages which contain invalid topology configuration, on
firmware versions which strictly validate this data. The most recent
releases of the DDP have resolved the invalid data. However, it is still
poor practice to essentially brick the device, and prevent access to the
device even through safe mode or recovery mode. It is also plausible that
this command could fail for some other reason in the future.
We cannot simply release the global lock after a failed call to
ice_get_set_tx_topo(). Releasing the lock indicates to firmware that global
configuration (downloading of the DDP) has completed. Future attempts by
this or other PFs to load the DDP will fail with a report that the DDP
package has already been downloaded. Then, PFs will enter safe mode as they
realize that the package on the device does not meet the minimum version
requirement to load. The reported error messages are confusing, as they
indicate the version of the default "safe mode" package in the NVM, rather
than the version of the file loaded from /lib/firmware.
Instead, we need to trigger CORER to clear global configuration. This is
the lowest level of hardware reset which clears the global configuration
lock and related state. It also clears any already downloaded DDP.
Crucially, it does *not* clear the Tx scheduler topology configuration.
Refactor ice_cfg_tx_topo() to always trigger a CORER after acquiring the
global lock, regardless of success or failure of the topology
configuration.
We need to re-initialize the HW structure when we trigger the CORER. Thus,
it makes sense for this to be the responsibility of ice_cfg_tx_topo()
rather than its caller, ice_init_tx_topology(). This avoids needless
re-initialization in cases where we don't attempt to update the Tx
scheduler topology, such as if it has already been programmed.
There is one catch: failure to re-initialize the HW struct should stop
ice_probe(). If this function fails, we won't have a valid HW structure and
cannot ensure the device is functioning properly. To handle this, ensure
ice_cfg_tx_topo() returns a limited set of error codes. Set aside one
specifically, -ENODEV, to indicate that the ice_init_tx_topology() should
fail and stop probe.
Other error codes indicate failure to apply the Tx scheduler topology. This
is treated as a non-fatal error, with an informational message informing
the system administrator that the updated Tx topology did not apply. This
allows the device to load and function with the default Tx scheduler
topology, rather than failing to load entirely.
Note that this use of CORER will not result in loops with future PFs
attempting to also load the invalid Tx topology configuration. The first PF
will acquire the global configuration lock as part of programming the DDP.
Each PF after this will attempt to acquire the global lock as part of
programming the Tx topology, and will fail with the indication from
firmware that global configuration is already complete. Tx scheduler
topology configuration is only performed during driver init (probe or
devlink reload) and not during cleanup for a CORER that happens after probe
completes.
Fixes: 91427e6d90 ("ice: Support 5 layer topology")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Issuing a reset when the driver is loaded without RDMA support, will
results in a crash as it attempts to remove RDMA's non-existent auxbus
device:
echo 1 > /sys/class/net/<if>/device/reset
BUG: kernel NULL pointer dereference, address: 0000000000000008
...
RIP: 0010:ice_unplug_aux_dev+0x29/0x70 [ice]
...
Call Trace:
<TASK>
ice_prepare_for_reset+0x77/0x260 [ice]
pci_dev_save_and_disable+0x2c/0x70
pci_reset_function+0x88/0x130
reset_store+0x5a/0xa0
kernfs_fop_write_iter+0x15e/0x210
vfs_write+0x273/0x520
ksys_write+0x6b/0xe0
do_syscall_64+0x79/0x3b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
ice_unplug_aux_dev() checks pf->cdev_info->adev for NULL pointer, but
pf->cdev_info will also be NULL, leading to the deref in the trace above.
Introduce a flag to be set when the creation of the auxbus device is
successful, to avoid multiple NULL pointer checks in ice_unplug_aux_dev().
Fixes: c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The memory target check is a hold-over from a refactor. It's harmless
but distracting, so just remove it.
Fixes: 2541626cfb ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-3-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The 'tag' parameter is passed by value and is not actually used after
being incremented, so remove the increment. It's the function that calls
gm200_flcn_pio_imem_wr that is supposed to (and does) increment 'tag'.
Fixes: 0e44c21708 ("drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)")
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Function nvkm_gsp_fwsec_v2() sets 'ret' if the kmemdup() call fails, but
it never uses or returns 'ret' after that point. We always need to release
the firmware regardless, so do that and then check for error.
Fixes: 176fdcbddf ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Pentium 4's which are INTEL_P4_PRESCOTT (model 0x03) and later have
a constant TSC. This was correctly captured until commit fadb6f569b
("x86/cpu/intel: Limit the non-architectural constant_tsc model checks").
In that commit, an error was introduced while selecting the last P4
model (0x06) as the upper bound. Model 0x06 was transposed to
INTEL_P4_WILLAMETTE, which is just plain wrong. That was presumably a
simple typo, probably just copying and pasting the wrong P4 model.
Fix the constant TSC logic to cover all later P4 models. End at
INTEL_P4_CEDARMILL which accurately corresponds to the last P4 model.
Fixes: fadb6f569b ("x86/cpu/intel: Limit the non-architectural constant_tsc model checks")
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250816065126.5000-1-suchitkarunakaran%40gmail.com
object_err() reports details of an object for further debugging, such as
the freelist pointer, redzone, etc. However, if the pointer is invalid,
attempting to access object metadata can lead to a crash since it does
not point to a valid object.
One known path to the crash is when alloc_consistency_checks()
determines the pointer to the allocated object is invalid because of a
freelist corruption, and calls object_err() to report it. The debug code
should report and handle the corruption gracefully and not crash in the
process.
In case the pointer is NULL or check_valid_pointer() returns false for
the pointer, only print the pointer value and skip accessing metadata.
Fixes: 81819f0fc8 ("SLUB core")
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
- Module macro parameter fix for the meson driver so that
it actually modprobes.
- ACPI quirk for the ASUS ProArt PX13
- Build dependency for the STMFX driver.
- Proper return value for the pinconf callbacks in the
Airhoa driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmisW9EACgkQQRCzN7AZ
XXMfKQ//Vu/LjQ4ubaKIx+9E3hcXL3Na2NZ+pZfmaAoHBAwyrPXKDXHQl7y82LpP
kOVqeocJNO0mbVopp9damekwWlfODVuDkBwI/eQpk8R+Z+PY8wuiXAf9bbypVsyr
3Sf0BVbXy6mJr5FA/XUcgLsJr2VO2B9vHlpfKd6WApfBeFoxUM23k70u1R0jEwqA
I3crpjNoEw1QgO0/bqDc12TBllF1vvF+PBER2XscFZcgOuLGaoLwbZGjjT/igzWj
V3oiHbvaxPBkGMal+tZPoqHg1zSj90RRKu2RU7r2t21M19tjBdkqT1VYhgqZzzIm
EKI6HmZIg2G+TwPzN24WQsFnbY5iy8hDqI5EYZ414A03Xeswh7z67C7AkWXmLhnX
TRMbol4an0gQM79rY65Vj9Qx0DQ5mZ7MzZECMs2WN5+kjJP6vE4BODiyjEstOSMm
ZRZardQPSXKF2UpsXuDXYjTSoiFSEP4RuA+d0owICLWMNXRdR3v21wEAD18/FSH9
L0/BedQlgr/lE0jykk4rVT3R8T1w2B/XXzAWMJO9tNZEuLOWRMWXJ01HT/BzW75F
vilRN4HlCrD2MtU5pkc9CSiYqqmw6OAjRgVB1Ip02CShhFYWk1Z+InlK67to2Nfz
09RBrwetBFaYWmHTHFmQfKr4tyzmgNpvLJ/rH9pvq2JRorJf3a8=
=UIco
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Module macro parameter fix for the meson driver so that it actually
modprobes
- ACPI quirk for the ASUS ProArt PX13
- Build dependency for the STMFX driver
- Proper return value for the pinconf callbacks in the Airhoa driver
* tag 'pinctrl-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: airoha: Fix return value in pinconf callbacks
pinctrl: STMFX: add missing HAS_IOMEM dependency
gpiolib: acpi: Add quirk for ASUS ProArt PX13
pinctrl: meson: Fix typo in device table macro
We were returning -EOPNOTSUPP for various remap_file_range cases
but for some of these the copy_file_range_syscall() requires -EINVAL
to be returned (e.g. where source and target file ranges overlap when
source and target are the same file). This fixes xfstest generic/157
which was expecting EINVAL for that (and also e.g. for when the src
offset is beyond end of file).
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
By default, /dev/sda is block special file from devtmpfs, getattr will
return file size as zero, causing loop failed for raw block device.
We can add bdev_statx() to return device size, however this may
introduce changes that are not acknowledged by user. Fix this problem by
reverting changes for block special file, file mapping host is set to
bdev inode while opening, and use i_size_read() directly to get device
size.
Fixes: 47b71abd58 ("loop: use vfs_getattr_nosec for accurate file size")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508200409.b2459c02-lkp@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250825093205.3684121-1-yukuai1@huaweicloud.com
[axboe: fix spelling error]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The recent kstack erase changes appear to have uncovered an existing
issue with a missing header inclusion:
In file included from drivers/misc/lkdtm/kstack_erase.c:12:
In file included from include/linux/kstack_erase.h:16:
arch/arm/include/asm/stacktrace.h:48:21: error: call to undeclared function 'in_entry_text'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
48 | frame->ex_frame = in_entry_text(frame->pc);
| ^
Include asm/sections.h here so the compiler can see the in_entry_text()
declaration.
Fixes: 752ec621ef ("ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value")
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250807071902.4077714-1-arnd@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
__ubsan_handle_divrem_overflow() incorrectly uses the RHS to report.
It always reports the same log: division of -1 by -1. But it should
report division of LHS by -1.
Signed-off-by: Junhui Pei <paradoxskin233@gmail.com>
Fixes: c6d308534a ("UBSAN: run-time undefined behavior sanity checker")
Link: https://lore.kernel.org/r/20250602153841.62935-1-paradoxskin233@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
dma_free_coherent() must only be called if the corresponding
dma_alloc_coherent() call has succeeded. Calling it when the allocation fails
leads to undefined behavior.
Delete the wrong call.
[ bp: Massage commit message. ]
Fixes: 71bcada88b ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/aIrfzzqh4IzYtDVC@pc
On commit 9286dfd573 ("platform/x86: asus-wmi: Fix spurious rfkill on
UX8406MA"), Mathieu adds a quirk for the Zenbook Duo to ignore the code
0x5f (WLAN button disable). On that laptop, this code is triggered when
the device keyboard is attached.
On the ASUS ROG Z13 2025, this code is triggered when pressing the side
button of the device, which is used to open Armoury Crate in Windows.
As this is becoming a pattern, where newer Asus laptops use this keycode
for emitting events, let's convert the wlan ignore quirk to instead
allow emitting codes, so that userspace programs can listen to it and
so that it does not interfere with the rfkill state.
With this patch, the Z13 wil emit KEY_PROG3 and the Duo will remain
unchanged and emit no event. While at it, add a quirk for the Z13 to
switch into tablet mode when removing the keyboard.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250808154710.8981-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the ignore_key_wlan quirk applies to keycodes 0x5D, 0x5E, and
0x5F. However, the relevant code for the Asus Zenbook Duo is only 0x5F.
Since this code is emitted by other Asus devices, such as from the Z13
for its ROG button, remove the extra codes before expanding the quirk.
For the Duo devices, which are the only ones that use this quirk, there
should be no effect.
Fixes: 9286dfd573 ("platform/x86: asus-wmi: Fix spurious rfkill on UX8406MA")
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250808154710.8981-1-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix a permanent ACPI table memory leak when amd_hfi_metadata_parser()
fails due to invalid PCCT table length or memory allocation errors.
Fixes: d4e95ea7a7 ("platform/x86: hfi: Parse CPU core ranking data from shared memory")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://lore.kernel.org/r/20250822083329.710857-1-zhen.ni@easystack.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The userspace load can put up to 2048 bits into an xlen bit stack
buffer. We want only xlen bits, so check the size beforehand.
Fixes: 2fa290372d ("RISC-V: KVM: add 'vlenb' Vector CSR")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Link: https://lore.kernel.org/r/20250805104418.196023-4-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, kvm_riscv_gstage_ioremap() is used to map IMSIC gpa to the
spa of IMSIC guest interrupt file.
The PAGE_KERNEL_IO property includes global setting whereas it does not
include user mode settings, so when accessing the IMSIC address in the
virtual machine, a guest page fault will occur, this is not expected.
According to the RISC-V Privileged Architecture Spec, for G-stage address
translation, all memory accesses are considered to be user-level accesses
as though executed in U-mode.
Fixes: 659ad6d82c ("RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20250807070729.89701-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
In the current design, the `pm8008_regulator_get_voltage_sel()` callback
can return a negative value if the raw voltage value is read as 0 uV from
the PMIC HW register. This can cause the probe to fail when the
`machine_constraints_voltage()` check is called during the regulator
registration flow.
Fix this by using the helper `regulator_map_voltage_linear_range()` to
convert the raw value to a voltage selector inside the mentioned get
voltage selector function. This ensures that the value returned is always
within the defined range.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Message-ID: <20250823-pm8008-negitive-selector-v1-1-52b026a4b5e8@quicinc.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_lookup_component_nolocked() is very complex today.
Let's tidyup the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-ID: <87cy8sysuy.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-generic-dmaengine-pcm.c uses same dev for both CPU and Platform.
In such case, CPU component driver might not have driver->name, then
snd_soc_lookup_component_nolocked() will be NULL pointer access error.
Care NULL driver name.
Call trace:
strcmp from snd_soc_lookup_component_nolocked+0x64/0xa4
snd_soc_lookup_component_nolocked from snd_soc_unregister_component_by_driver+0x2c/0x44
snd_soc_unregister_component_by_driver from snd_dmaengine_pcm_unregister+0x28/0x64
snd_dmaengine_pcm_unregister from devres_release_all+0x98/0xfc
devres_release_all from device_unbind_cleanup+0xc/0x60
device_unbind_cleanup from really_probe+0x220/0x2c8
really_probe from __driver_probe_device+0x88/0x1a0
__driver_probe_device from driver_probe_device+0x30/0x110
driver_probe_device from __driver_attach+0x90/0x178
__driver_attach from bus_for_each_dev+0x7c/0xcc
bus_for_each_dev from bus_add_driver+0xcc/0x1ec
bus_add_driver from driver_register+0x80/0x11c
driver_register from do_one_initcall+0x58/0x23c
do_one_initcall from kernel_init_freeable+0x198/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28
Fixes: 144d6dfc74 ("ASoC: soc-core: merge snd_soc_unregister_component() and snd_soc_unregister_component_by_driver()")
Reported-by: J. Neuschäfer <j.ne@posteo.net>
Closes: https://lore.kernel.org/r/aJb311bMDc9x-dpW@probook
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: Ondřej Jirman <megi@xff.cz>
Closes: https://lore.kernel.org/r/arxpwzu6nzgjxvsndct65ww2wz4aezb5gjdzlgr24gfx7xvyih@natjg6dg2pj6
Tested-by: J. Neuschäfer <j.ne@posteo.net>
Message-ID: <87ect8ysv8.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
vectors conversion
- Filter out the invalid machine reset reason value -1 when running as a guest
as in such cases the reason why the machine was rebooted does not make
a whole lot of sense
- Init the resource control machinery on Hygon hw, also in order to avoid
a division by 0 in addition to actually enabling the feature on hw which
supports it
-----BEGIN PGP SIGNATURE-----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=VH8m
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the GDS mitigation detection on some machines after the recent
attack vectors conversion
- Filter out the invalid machine reset reason value -1 when running as
a guest as in such cases the reason why the machine was rebooted does
not make a whole lot of sense
- Init the resource control machinery on Hygon hw in order to avoid a
division by zero and to actually enable the feature on hw which
supports it
* tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix GDS mitigation selecting when mitigation is off
x86/CPU/AMD: Ignore invalid reset reason value
x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper
