From: Mario Limonciello <mario.limonciello@amd.com>
Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.
Example use cases are "wake from suspend on approach" or to "lock
when leaving".
This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.
Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.
Add LED and memory nodes, and enabled GPIO0 for Agilex5 devkit.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add clock-frequency property to the internal oscillators, cb_intosc_ls_clk
and cb_intosc_hs_div2_clk.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
This dts is enough to make the board boot to Linux with the rootfs on
a micro SD card.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Terasic DE10-nano development board features a Cyclone5 FPGA, USB,
HDMI output and an Arduino compatible header.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Agilex5 devkit supports a separate NAND daughter card.
The NAND daughter card replaces the SDMMC slot that is on the default
daughter card thus requires a separate board dts file.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Instead of a bool field in struct io_sr_msg, use REQ_F_IMPORT_BUFFER to
track whether io_send_zc() has already imported the buffer. This flag
already serves a similar purpose for sendmsg_zc and {read,write}v_fixed.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20250325143943.1226467-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add fault injection for xe_oa_alloc_regs to allow it to fail while
executing xe_oa_add_config_ioctl().
This need to be added as it cannot be reached by injecting error through
IOCTL arguments.
Signed-off-by: Nakshtra Goyal <nakshtra.goyal@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250227102339.2859726-1-nakshtra.goyal@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Direct HLT instruction execution causes #VEs for TDX VMs which is routed
to hypervisor via TDCALL. safe_halt() routines execute HLT in STI-shadow
so IRQs need to remain disabled until the TDCALL to ensure that pending
IRQs are correctly treated as wake events.
Emit warning and fail emulation if IRQs are enabled during HLT #VE handling
to avoid running into scenarios where IRQ wake events are lost resulting in
indefinite HLT execution times.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250228014416.3925664-4-vannapurve@google.com
Direct HLT instruction execution causes #VEs for TDX VMs which is routed
to hypervisor via TDCALL. If HLT is executed in STI-shadow, resulting #VE
handler will enable interrupts before TDCALL is routed to hypervisor
leading to missed wakeup events, as current TDX spec doesn't expose
interruptibility state information to allow #VE handler to selectively
enable interrupts.
Commit bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
prevented the idle routines from executing HLT instruction in STI-shadow.
But it missed the paravirt routine which can be reached via this path
as an example:
kvm_wait() =>
safe_halt() =>
raw_safe_halt() =>
arch_safe_halt() =>
irq.safe_halt() =>
pv_native_safe_halt()
To reliably handle arch_safe_halt() for TDX VMs, introduce explicit
dependency on CONFIG_PARAVIRT and override paravirt halt()/safe_halt()
routines with TDX-safe versions that execute direct TDCALL and needed
interrupt flag updates. Executing direct TDCALL brings in additional
benefit of avoiding HLT related #VEs altogether.
As tested by Ryan Afranji:
"Tested with the specjbb2015 benchmark. It has heavy lock contention which leads
to many halt calls. TDX VMs suffered a poor score before this patchset.
Verified the major performance improvement with this patchset applied."
Fixes: bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-3-vannapurve@google.com
CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.
For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
CONFIG_PARAVIRT_XXL.
Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.
Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.
Fixes: bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-2-vannapurve@google.com
Commit e49ad66781 ("PCI: j721e: Add TI J784S4 PCIe configuration")
assigned the value of .linkdown_irq_regfield for the J784S4 SoC as the
"LINK_DOWN" macro corresponding to BIT(1), and as a result, the Link
Down interrupts on J784S4 SoC are missed.
According to the Technical Reference Manual and Register Documentation
for the J784S4 SoC[1], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1",
which is not the correct field for the link-state interrupt. Instead, it
is BIT(10) of the "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds
to the link-state field named as "ENABLE_SYS_EN_PCIE_LINK_STATE".
Thus, set .linkdown_irq_regfield to the macro "J7200_LINK_DOWN", which
expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs
already reuse this macro since it accurately represents the "link-state"
field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register.
1: https://www.ti.com/lit/zip/spruj52
Fixes: e49ad66781 ("PCI: j721e: Add TI J784S4 PCIe configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, add a missing .linkdown_irq_regfield member
set to the J7200_LINK_DOWN macro to struct j7200_pcie_ep_data]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250305132018.2260771-1-s-vadapalli@ti.com
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
Expose the supported IRQ types in the CAPS register.
This way, the host side driver (drivers/misc/pci_endpoint_test.c) can
know which IRQ types that the endpoint supports.
The host side driver will make use of this information in a follow-up
commit.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-15-cassel@kernel.org
Neither RK3568 or RK3588 supports INTx interrupts.
Since epc_features is zero initialized, this is strictly not needed.
However, setting intx_capable explicitly to false makes it more clear
that neither RK3568 or RK3588 supports INTx interrupts.
No functional change.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-14-cassel@kernel.org
In struct pci_epc_features, an EPC driver can already specify if they
support MSI (by setting msi_capable) and MSI-X (by setting msix_capable).
Thus, for consistency, allow an EPC driver to specify if it supports
INTx interrupts as well (by setting intx_capable).
Since this struct is zero initialized, EPC drivers that want to claim
INTx support will need to set intx_capable to true.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: add missing kernel-doc for "intx_capable"]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-13-cassel@kernel.org
WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS
Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n]
Selected by [m]:
- DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y]
DRM_XE_DISPLAY requires FB_IOMEM_HELPERS, but the dependency FB_CORE is
missing, selecting FB_IOMEM_HELPERS if DRM_FBDEV_EMULATION is set as
other drm drivers.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250323114103.1960511-1-yuehaibing@huawei.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6895828828)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
tried to follow the logic: initialize everything needed and if
everything succeeds, set the flag that it's enabled. While it fixed some
corner cases of those calls failing, it was wrong for setting the flag
after the call to xe_heci_gsc_init(): that function does a different
initialization for survivability mode.
Fix that and add comments about this being done on purpose.
Suggested-by: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-2-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 14efa739ca)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
moved the survivability handling to be done entirely in the xe_pci
layer. However there are some issues with that approach:
1) Survivability mode needs at least the mmio initialized, otherwise it
can't really read a register to decide if it should enter that state
2) SR-IOV mode should be initialized, otherwise it's not possible to
check if it's VF
Besides, as pointed by Riana the check for
xe_survivability_mode_enable() was wrong in xe_pci_probe() since it's
not a bool return.
Fix that by moving the initialization to be entirely in the xe_device
layer, with the correct dependencies handled: only after mmio and sriov
initialization, and not triggering it on error from
wait_for_lmem_ready(). This restores the trigger behavior before that
commit. The xe_pci layer now only checks for "is it enabled?",
like it's doing in xe_pci_suspend()/xe_pci_remove(), etc.
Cc: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-1-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 86b5e0dbba)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
* Refactor a couple of APIs to reduce amount of calls to memory allocator
* Miscellaneous small fixes and improvements
The following is an automated git shortlog grouped by driver:
charlcd:
- Partially revert "Move hwidth and bwidth to struct hd44780_common"
gpiolib:
- add gpiod_multi_set_value_cansleep()
hd44780:
- Rename hd to hdc in hd44780_common_alloc()
- Call charlcd_alloc() from hd44780_common_alloc()
- Make use of hd44780_common_free()
- Introduce hd44780_common_free()
- Fix an API misuse in hd44780.c
lcd2s:
- Allocate memory for custom data in charlcd_alloc()
MAX6959 should select BITREVERSE:
- MAX6959 should select BITREVERSE
panel:
- Make use of hd44780_common_free()
- Fix an API misuse in panel.c
seg-led-gpio:
- use gpiod_multi_set_value_cansleep
-----BEGIN PGP SIGNATURE-----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=rwYl
-----END PGP SIGNATURE-----
Merge tag 'auxdisplay-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay updates from Andy Shevchenko:
- Refactor a couple of APIs to reduce amount of calls to memory
allocator
- Miscellaneous small fixes and improvements
* tag 'auxdisplay-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: hd44780: Rename hd to hdc in hd44780_common_alloc()
auxdisplay: hd44780: Call charlcd_alloc() from hd44780_common_alloc()
auxdisplay: panel: Make use of hd44780_common_free()
auxdisplay: hd44780: Make use of hd44780_common_free()
auxdisplay: hd44780: Introduce hd44780_common_free()
auxdisplay: lcd2s: Allocate memory for custom data in charlcd_alloc()
auxdisplay: charlcd: Partially revert "Move hwidth and bwidth to struct hd44780_common"
auxdisplay: panel: Fix an API misuse in panel.c
auxdisplay: hd44780: Fix an API misuse in hd44780.c
auxdisplay: MAX6959 should select BITREVERSE
auxdisplay: seg-led-gpio: use gpiod_multi_set_value_cansleep
The WA requires KMD to disable DOP clock gating during a semaphore
wait and also ensure that idle delay for every CS is lower than the
idle wait time in the PWRCTX_MAXCNT register. Default values for these
registers already comply with this restriction.
v2: Store timestamp_base in gt info and other comments (Daniele)
v3: Skip WA check for VF
v4: Review comments (Matt Roper)
v5: Cleanup the clock functions and use reg_field_get (Matt Roper)
v6: Fix checkpatch issue
v7: Fix CI issue
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320175123.3026754-1-vinay.belgaumkar@intel.com
(cherry picked from commit 7c53ff050b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
* New
- Support ACPI match for Framework systems.
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port.
- EC feature of AP mode entry.
- Setting USB mode of EC Type-C.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZ+DHCxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0djABANQJoI2yZt8w8k7mQ9qjkE3C5sZVY83Z
uali0vVU3SnVAP9i5TVJ/RlyerwqtEaqSKfSC5p5Y7uURxnQWQ1cnYu/BQ==
=lEz+
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
- Support ACPI match for Framework systems
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port
- EC feature of AP mode entry
- Setting USB mode of EC Type-C
* tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Add support for setting USB mode via sysfs
platform/chrome: cros_ec_sysfs: Expose AP_MODE_ENTRY feature state
platform/chrome: cros_ec_sysfs: Expose PD mux status
platform/chrome: cros_ec_lpc: Match on Framework ACPI device
MAINTAINERS: Update maintainers for ChromeOS USBC related drivers
Starting from commit 18778b5fdd ("drm/xe: Eliminate usage of
TIMESTAMP_OVERRIDE") we access the CTC_MODE register only to warn
if it has undocumented value. There is no point in doing that on
the VF driver. While here, move this check to a helper function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311114042.1954-2-michal.wajdeczko@intel.com
(cherry picked from commit fce3fb7b91)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates
-----BEGIN PGP SIGNATURE-----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=Wihe
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates"
* tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits)
firmware: thead: add CONFIG_MAILBOX dependency
firmware: thead,th1520-aon: Fix use after free in th1520_aon_init()
pmdomain: arm: scmi_pm_domain: Remove redundant state verification
pmdomain: thead: fix TH1520_AON_PROTOCOL dependency
pmdomain: thead: Add power-domain driver for TH1520
dt-bindings: power: Add TH1520 SoC power domains
firmware: thead: Add AON firmware protocol driver
dt-bindings: firmware: thead,th1520: Add support for firmware node
pmdomain: rockchip: add regulator dependency
pmdomain: rockchip: add regulator support
pmdomain: rockchip: fix rockchip_pd_power error handling
pmdomain: rockchip: reduce indentation in rockchip_pd_power
pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors
pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power
dt-bindings: power: rockchip: add regulator support
pmdomain: rockchip: Fix build error
pmdomain: imx: gpcv2: use proper helper for property detection
MAINTAINERS: Update section for cpuidle-psci
pmdomain: rockchip: Check if SMC could be handled by TA
cpuidle: psci: Add trace for PSCI domain idle
...
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove
-----BEGIN PGP SIGNATURE-----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=a9PQ
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC host:
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove"
* tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: core: Remove redundant null check
mmc: host: Wait for Vdd to settle on card power off
mmc: omap: Fix memory leak in mmc_omap_new_slot
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
mmc: renesas_sdhi: fix error code in renesas_sdhi_probe()
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD
tty: mmc: sdio: use bool for cts and remove parentheses
dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
dt-bindings: mmc: sunxi: Simplify compatible string listing
dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528
dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528
mmc: renesas_sdhi: Add support for RZ/G3E SoC
dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562
dt-bindings: mmc: Add support for rk3562 eMMC
mmc: core: Trim trailing whitespace from card product names
dt-bindings: mmc: atmel,hsmci: Convert to json schema
dt-bindings: mmc: mmc-slot: Make compatible property optional
dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support
...
GPIO core:
- add sanitization of return values of GPIO provider callbacks so that invalid
ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers that return
an integer and allow to indicate driver errors to the GPIO core
- change the interface of all gpiod_set_value() variants to return an integer
thus becoming able to indicate failures in the underlying layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler interface to
gpiod_set_array_value_cansleep() and use it across several drivers treewide
- reduce the number of atomic reads of the descriptor flags in gpiolib debugfs
code
- simplify for_each_hwgpio_in_range() and for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE subsystem
disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't allow
drivers to set it as it should only be handled by GPIO core and start
actually enforcing it in GPIO core for *all* drivers, not only the ones
implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its device in
order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the new value
setter callbacks
- convert several drivers to using automatic lock guards from cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by() and bits.h
macros)
- refactor gpio-latch (use generic device properties, lock guards and some
local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO devices
into its own library
- use str_enable_disable(), str_high_low() and other string helpers where
applicable
- extend the gpio-mmio abstraction layer to allow calling into the pinctrl
back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list
-----BEGIN PGP SIGNATURE-----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=h7Hv
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
- New drivers
* Driver for HTU31
* Congatec Board Controller monitoring driver
* Driver for TI INA233 Current and Power Monitor
- Support for additional chips or boards in existing drivers
* pmbus/ltc2978: Add support for LT717x and LTM4673
* asus-ec-sensors: Add PRIME X670E-PRO WIFI
* k10temp: Add support for cyan skillfish
* nct6683: Add customer ID for AMD BC-250
* lm90: Add support for NCT7716, NCT7717 and NCT7718
- Other notable improvements in existing drivers
* emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
* acpi_power_meter: Convert to with_info API
* dell-smm: Increase the number of fans
* pmbus/core: Optimize debugfs support and use i2c_client debugfs
directory
* hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
* Various drivers: Use per-client debugfs entry provided by I2C
subsystem
-----BEGIN PGP SIGNATURE-----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=6HFa
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for HTU31
- Congatec Board Controller monitoring driver
- Driver for TI INA233 Current and Power Monitor
Support for additional chips or boards in existing drivers:
- pmbus/ltc2978: Add support for LT717x and LTM4673
- asus-ec-sensors: Add PRIME X670E-PRO WIFI
- k10temp: Add support for cyan skillfish
- nct6683: Add customer ID for AMD BC-250
- lm90: Add support for NCT7716, NCT7717 and NCT7718
Other notable improvements in existing drivers:
- emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
- acpi_power_meter: Convert to with_info API
- dell-smm: Increase the number of fans
- pmbus/core: Optimize debugfs support and use i2c_client
debugfs directory
- hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
- Various drivers: Use per-client debugfs entry provided by
I2C subsystem"
* tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: emc2305: Use devm_thermal_of_cooling_device_register
hwmon: emc2305: Add OF support
dt-bindings: hwmon: Add Microchip emc2305 support
dt-bindings: hwmon: Drop stray blank line in the header
hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register
hwmon: add driver for HTU31
dt-bindings: hwmon: Add description for sensor HTU31
hwmon: Add driver for TI INA233 Current and Power Monitor
dt-bindings: hwmon: ti,ina2xx: Add INA233 device
hwmon: Add Congatec Board Controller monitoring driver
hwmon: (pmbus/ltc2978) add support for lt717x
dt-bindings: hwmon: ltc2978: add support for LT717x
hwmon: (pmbus/ltc2978) Add support for LT717x - docs
hwmon: (dell-smm) Increment the number of fans
hwmon: (ntc_thermistor) return error instead of clipping on OOB
hwmon: (pt5161l) Use per-client debugfs entry
hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates
hwmon: (acpi_power_meter) Fix the fake power alarm reporting
hwmon: (gpio-fan) Add missing mutex locks
dt-bindings: hwmon: gpio-fan: Add optional regulator support
...
Here comes the usual mix of cleanups, new dt-bindings for existing
drivers and nexus nodes; and a new driver for the pwm subsystem.
Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan,
Frank Li, Herve Codina, Kever Yang, and Nam Cao.
Patch feedback was provided by Andy Shevchenko, Conor Dooley, Daniel
Mack, Duje Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski,
Neil Armstrong, Rob Herring, and Zack Rusin.
Thanks to all of them.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmfhj+sACgkQj4D7WH0S
/k5WgwgAq7EBr02O5Pkq/KykkA49oMPxWrwB626B75a/wzb/UUCrwMhYa66sgjmc
NZkjXhick5o7RrJJIU6cV7qR3v91CeWgwQmosELt8Kd6nHTfldIm+92E0zmiWnK8
1teTw9WklPnQI/y67K5/xBLkz9f5zLRXScVebR+sINRsaAfbvF5dnvfftrDfzrB7
+Lvavl2AfXu//fExlSo/4a5NTwxP/5rdqIOhgSaQc4yF+lZH2EjvOnbQjMh7gB1q
1+RiUkbsfhHakTd1g9kzezSGZxYhYvcKJw+kD+0+1S34aK+s1hKkqffWRWDsAQhT
ZAxj8Cn+nQpROMpE31EiWV1VTWIs2A==
=9ySz
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Here comes the usual mix of cleanups, new dt-bindings for existing
drivers and nexus nodes; and a new driver for the pwm subsystem.
Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan,
Frank Li, Herve Codina, Kever Yang, and Nam Cao. Patch feedback was
provided by Andy Shevchenko, Conor Dooley, Daniel Mack, Duje
Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski, Neil
Armstrong, Rob Herring, and Zack Rusin. Thanks to all of them"
* tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
dt-bindings: pwm: imx: Add i.MX93, i.MX94 and i.MX95 support
dt-bindings: pwm: rockchip: Add rockchip,rk3528-pwm
pwm: stmpe: Allow to compile as a module
pwm: Check for CONFIG_PWM using IS_REACHABLE() in main header
dt-bindings: pwm: rockchip: Add rockchip,rk3562-pwm
pwm: Strengthen dependency for PWM_SIFIVE
pwm: clps711x: Drop of_match_ptr() usage for .of_match_table
pwm: pca9685: Drop ACPI_PTR() and of_match_ptr()
pwm: Add support for pwm nexus dt bindings
dt-bindings: pwm: Add support for PWM nexus node
pwm: Add upgrade path to #pwm-cells = <3> for users of of_pwm_single_xlate()
pwm: gpio: Switch to use hrtimer_setup()
pwm: sophgo: add driver for Sophgo SG2042 PWM
dt-bindings: pwm: sophgo: add PWM controller for SG2042
pwm: lpss: Only include <linux/pwm.h> where needed
The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking). Otherwise there's the usual fixes, improvements and
cleanups, plus support for a bunch of new devices.
- Support for offloaing support from David Lechner.
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP i.MX94,
Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST STM32 OSPI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfhbQgACgkQJNaLcl1U
h9DQrAf6A30I4GJGwD4qWwCdsChxr0of8r3q0zIAcC53UaMqLBTdwnQT+wD4MTe8
vnUY54Z8PYoDKaPx54YxmWh0zB4OQgxvtcJyaZ9biLWtPy3kZdhHlC5xrVQbzLc5
ki/AW2Fsl2GQ1+5mtI3yP6awQ5HQ17gXS1q+nl2/D1njv2sI1Z1998nBkmsaNwNb
SPmaDV5UIQkO9wENnJCbX7bRlM+FgkgYo10JFffmWCnntsaZ01NlUC+BBg9y9xAy
padE2ucWWDqdmiHOC1z7kJU5MFGZWGSSVATLZZz3GL+vw/Oan/Mb5K2zoZh0IcD9
QPJxNnokYtYFR/IlH/obL0EMutaoSQ==
=vqZa
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking).
Otherwise there's the usual fixes, improvements and cleanups, plus
support for a bunch of new devices.
- Support for offloading support from David Lechner
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP
i.MX94, Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST
STM32 OSPI"
* tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
spi: spi-mem: Introduce a default ->exec_op() debug log
spi: dt-bindings: cdns,qspi-nor: Require some peripheral properties
spi: dt-bindings: cdns,qspi-nor: Deprecate the Cadence compatible alone
spi: dt-bindings: cdns,qspi-nor: Be more descriptive regarding what this controller is
spi: stm32-ospi: Include "gpio/consumer.h"
MAINTAINERS: adjust the file entry in GOCONTROLL MODULINE MODULE SLOT
spi: spi-qpic-snand: avoid memleak in qcom_spi_ecc_init_ctx_pipelined()
spi: spi-mux: Fix coverity issue, unchecked return value
spi: sophgo: fix incorrect type for ret in sg2044_spifmc_write()
spi: sg2044-nor: fix uninitialized variable in probe
spi: sg2044-nor: fix signedness bug in sg2044_spifmc_write()
spi: sg2044-nor: Convert to dev_err_probe()
spi: sg2044-nor: Fully convert to device managed resources
dt-bindings: spi: add compatibles for mt7988
spi: spidev: Add an entry for the gocontroll moduline module slot
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
dt-bindings: vendor-prefixes: add GOcontroll
spi: Use inclusive language
spi: cadence-qspi: Improve spi memory performance
...
This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling:
- A rework of the handling of LDO5 on the PCA9450, this was quite wrong
in how it handled the SD_VSEL conrol and only worked for some system
designs. This includes a DTS update since there was a not quite ABI
compatible change as part of the fix.
- A devres change introducing devm_kmemdup_array() was pulled in so it
could be used with some regulator conversions to that function, this
pulled in some other devres and IIO stuff that was part of the same pull
request.
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed.
- Support for the NXP PF9453.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmfhaNUACgkQJNaLcl1U
h9C3lAf8C6tohTvyzPWCcqQN5RnoZSw1SNN9jloEL1xcMKEtRosTaqIYRDKhuKUL
Drumh8C1B9Kx2wrsvE+j1eX4gXCaPK9P7EZbH3h3WFXkFkov6MNsH+UmhOAVm3AT
U/JmYs6/iGng/OptlYsguahwgwyj2eLb8E5RzSg7KgKbNW47M7QcqpkarQpRB+Si
Fz5528UQwDPwD04R4SEIn85I1xnJWdFVyOdfQA32Ugh7l8Vhgf+Z7G1aH4/5hOz8
cYJKoZscgOIkJw4lsKbS/+dCo2haYJqKCcT68P8qGf8zr9yeLPzkLYqNf+NaW/wP
uhoJKDm0nqo/rC9T1810YQfbPrfg6w==
=oFD5
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
A fix for an issue where CONFIG_FS_ENCRYPTION could be enabled without
some of its dependencies, and a small documentation update.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CBShQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxj0AQC4OlE/HbIY2w3zO8Az9WEF9+4Dz9od
EpxTwO/fk9PC+gD/Z7r8J3xn+ykcy9QcZW+Qucd64k+rbmvqj36gXce6hAI=
=r+lX
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"A fix for an issue where CONFIG_FS_ENCRYPTION could be enabled without
some of its dependencies, and a small documentation update"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: mention init_on_free instead of page poisoning
fscrypt: drop obsolete recommendation to enable optimized ChaCha20
Revert "fscrypt: relax Kconfig dependencies for crypto API algorithms"
A fix for an issue where CONFIG_FS_VERITY could be enabled without some
of its dependencies, and a small documentation update.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CBZBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK5WSAP9sihsazS5s2FwkY2ukwxuPBm448O6R
w457RM/j2Dz6oQEAhQF4oKU6mWJk0dOFMoBJCEUUJinb1diYTE0BMtSbXAk=
=BwSf
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"A fix for an issue where CONFIG_FS_VERITY could be enabled without
some of its dependencies, and a small documentation update"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
Revert "fsverity: relax build time dependency on CRYPTO_SHA256"
Documentation: add a usecase for FS_IOC_READ_VERITY_METADATA
-----BEGIN PGP SIGNATURE-----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=SUpV
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-6.15' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"This is a larger set of patches than usual, consisting of a set of
build clean-ups, a rework of error handling in setting up CIPSO label
specification and a bug fix in network labeling"
* tag 'Smack-for-6.15' of https://github.com/cschaufler/smack-next:
smack: recognize ipv4 CIPSO w/o categories
smack: Revert "smackfs: Added check catlen"
smack: remove /smack/logging if audit is not configured
smack: ipv4/ipv6: tcp/dccp/sctp: fix incorrect child socket label
smack: dont compile ipv6 code unless ipv6 is configured
Smack: fix typos and spelling errors
-----BEGIN PGP SIGNATURE-----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=QD7q
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add additional SELinux access controls for kernel file reads/loads
The SELinux kernel file read/load access controls were never updated
beyond the initial kernel module support, this pull request adds
support for firmware, kexec, policies, and x.509 certificates.
- Add support for wildcards in network interface names
There are a number of userspace tools which auto-generate network
interface names using some pattern of <XXXX>-<NN> where <XXXX> is a
fixed string, e.g. "podman", and <NN> is a increasing counter.
Supporting wildcards in the SELinux policy for network interfaces
simplifies the policy associted with these interfaces.
- Fix a potential problem in the kernel read file SELinux code
SELinux should always check the file label in the
security_kernel_read_file() LSM hook, regardless of if the file is
being read in chunks. Unfortunately, the existing code only
considered the file label on the first chunk; this pull request fixes
this problem.
There is more detail in the individual commit, but thankfully the
existing code didn't expose a bug due to multi-stage reads only
taking place in one driver, and that driver loading a file type that
isn't targeted by the SELinux policy.
- Fix the subshell error handling in the example policy loader
Minor fix to SELinux example policy loader in scripts/selinux due to
an undesired interaction with subshells and errexit.
* tag 'selinux-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: get netif_wildcard policycap from policy instead of cache
selinux: support wildcard network interface names
selinux: Chain up tool resolving errors in install_policy.sh
selinux: add permission checks for loading other kinds of kernel files
selinux: always check the file label in selinux_kernel_read_file()
selinux: fix spelling error
-----BEGIN PGP SIGNATURE-----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=oxfV
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
Introduce Rust support for the `hrtimer` subsystem:
- Add a way to use the `hrtimer` subsystem from Rust. Rust code can now set up
intrusive timers without allocating when starting the timer.
- Add support for `Pin<Box<_>>`, `Arc<_>`, `Pin<&_>` and `Pin<&mut _>` as
pointer types for use with timer callbacks.
- Add support for setting clock source and timer mode.
`kernel` crate:
- Add `Arc::as_ptr` for converting an `Arc` to a raw pointer. This is a
dependency for the `hrtimer` API.
- Add `Box::into_pin` for converting a `Box<_>` into a `Pin<Box<_>>` to align
with Rust `alloc`. This is a dependency for the `hrtimer` API.
-----BEGIN PGP SIGNATURE-----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=vNJu
-----END PGP SIGNATURE-----
Merge tag 'rust-hrtimer-for-v6.15-v3' of https://github.com/Rust-for-Linux/linux into rust-next
Pull rust-hrtimer updates from Andreas Hindborg:
"Introduce Rust support for the 'hrtimer' subsystem:
- Add a way to use the 'hrtimer' subsystem from Rust. Rust code can
now set up intrusive timers without allocating when starting the
timer.
- Add support for 'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and
'Pin<&mut _>' as pointer types for use with timer callbacks.
- Add support for setting clock source and timer mode.
'kernel' crate:
- Add 'Arc::as_ptr' for converting an 'Arc' to a raw pointer. This is
a dependency for the 'hrtimer' API.
- Add 'Box::into_pin' for converting a 'Box<_>' into a 'Pin<Box<_>>'
to align with Rust 'alloc'. This is a dependency for the 'hrtimer'
API."
* tag 'rust-hrtimer-for-v6.15-v3' of https://github.com/Rust-for-Linux/linux:
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: hrtimer: implement `HrTimerPointer` for `Arc`
rust: sync: add `Arc::as_ptr`
rust: hrtimer: introduce hrtimer support
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi).
- Check a pointer against NULL early in int3402_thermal_probe() to
avoid a potential NULL pointer dereference (Chenyuan Yang).
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards).
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King).
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfhhfYSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1FYIH/14phhTpJGvK1M8NxAVO2fvzXBvGeB0z
SUUgJHkctopg1qW5cIvPph21vc2ZFcbqYMBb23zy6SzC4ytqQVKVJ6gkGnwypeOu
yqKGpBEQlZTeL2KmI4QdAikNc8AGLDBC8M4aohrkRoQSpjEIVAs9Qbm8tu9yexTN
R/wNih1fg0sLg22aJ5jPa1oCItohtG7z2Zxt9j5m5xKGrv4XdP3c51uetpCyBNcw
J2Cs/7xwP0CFiTH2hOQtyqY+GMLyebe7OuAJtKGx47KEgcr61imcGXezcTSmumlC
l5oHWhSad/FTayx/OCvV8ajf1qPPcb0P88EUF0cuaawj2zKdlGBZzco=
=mhAK
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include one thermal core fix for an issue leading to a NULL
pointer dereference, a similar fix for the int340x thermal driver
(even though the issue may not actually occur in practice in this
particular case), and a bunch of cleanups, mostly related to replacing
kzalloc() with kcalloc() where applicable.
Summary:
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi)
- Check a pointer against NULL early in int3402_thermal_probe() to
avoid a potential NULL pointer dereference (Chenyuan Yang)
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards)
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King)
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET)"
* tag 'thermal-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add NULL check for adev
thermal: core: Delay exposing sysfs interface
thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
thermal: intel: Clean up zone_trips[] initialization in int340x_thermal_zone_add()
thermal: hisi: Use kcalloc() instead of kzalloc() with multiplication
thermal: int340x: Use kcalloc() instead of kzalloc() with multiplication
thermal: k3_j72xx_bandgap: Use kcalloc() instead of kzalloc()
thermal/of: Use kcalloc() instead of kzalloc() with multiplication
thermal/debugfs: replace kzalloc() with kcalloc() in thermal_debug_tz_add()