Commit graph

1,385,869 commits

Author SHA1 Message Date
Lo-an Chen
d60073294c drm/amd/display: Fix incorrect fw_state address in dmub_srv
[WHY]
The fw_state in dmub_srv was assigned with wrong address.
The address was pointed to the firmware region.

[HOW]
Fix the firmware state by using DMUB_DEBUG_FW_STATE_OFFSET
in dmub_cmd.h.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f57b38ac85)
2025-03-18 16:33:38 -04:00
Mario Limonciello
acbf16a6ae drm/amd/display: Use HW lock mgr for PSR1 when only one eDP
[WHY]
DMUB locking is important to make sure that registers aren't accessed
while in PSR.  Previously it was enabled but caused a deadlock in
situations with multiple eDP panels.

[HOW]
Detect if multiple eDP panels are in use to decide whether to use
lock. Refactor the function so that the first check is for PSR-SU
and then replay is in use to prevent having to look up number
of eDP panels for those configurations.

Fixes: f245b400a2 ("Revert "drm/amd/display: Use HW lock mgr for PSR1"")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3965
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ed569e1279)
Cc: stable@vger.kernel.org
2025-03-18 16:33:11 -04:00
Yilin Chen
35f0f9f421 drm/amd/display: Fix message for support_edp0_on_dp1
[WHY]
The info message was wrong when support_edp0_on_dp1 is enabled

[HOW]
Use correct info message for support_edp0_on_dp1

Fixes: f6d17270d1 ("drm/amd/display: add a quirk to enable eDP0 on DP1")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Yilin Chen <Yilin.Chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79538e6365)
Cc: stable@vger.kernel.org
2025-03-18 16:32:33 -04:00
Philip Yang
542c3bb836 drm/amdkfd: Fix user queue validation on Gfx7/8
To workaround queue full h/w issue on Gfx7/8, when application create
AQL queue, the ring buffer bo allocate size is queue_size/2 and
map queue_size ring buffer to GPU in 2 pieces using 2 attachments, each
attachment map size is queue_size/2, with same ring_bo backing memory.

For Gfx7/8, user queue buffer validation should use queue_size/2 to
verify ring_bo allocation and mapping size.

Fixes: 68e599db7a ("drm/amdkfd: Validate user queue buffers")
Suggested-by: Tomáš Trnka <trnka@scm.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e7a477735f)
Cc: stable@vger.kernel.org
2025-03-18 16:31:25 -04:00
David Belanger
35b6162bb7 drm/amdgpu: Restore uncached behaviour on GFX12
Always use MTYPE_UC if UNCACHED flag is specified.

This makes kernarg region uncached and it restores
usermode cache disable debug flag functionality.

Do not set MTYPE_UC for COHERENT flag, on GFX12 coherence is handled by
shader code.

Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eb6cdfb807)
Cc: stable@vger.kernel.org # 6.12.x
2025-03-18 16:29:52 -04:00
Wentao Liang
86730b5261 drm/amdgpu/gfx12: correct cleanup of 'me' field with gfx_v12_0_me_fini()
In gfx_v12_0_cp_gfx_load_me_microcode_rs64(), gfx_v12_0_pfp_fini() is
incorrectly used to free 'me' field of 'gfx', since gfx_v12_0_pfp_fini()
can only release 'pfp' field of 'gfx'. The release function of 'me' field
should be gfx_v12_0_me_fini().

Fixes: 52cb80c12e ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ebdc52607a)
Cc: stable@vger.kernel.org # 6.12.x
2025-03-18 16:29:16 -04:00
Jay Cornwall
424648c383 drm/amdkfd: Fix instruction hazard in gfx12 trap handler
VALU instructions with SGPR source need wait states to avoid hazard
with SALU using different SGPR.

v2: Eliminate some hazards to reduce code explosion

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7e0459d453)
Cc: stable@vger.kernel.org # 6.12.x
2025-03-18 16:28:34 -04:00
Alex Deucher
5ca0040ecf drm/amdgpu/pm: wire up hwmon fan speed for smu 14.0.2
Add callbacks for fan speed fetching.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4034
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 90df6db62f)
Cc: stable@vger.kernel.org # 6.12.x
2025-03-18 16:27:56 -04:00
Harish Kasiviswanathan
19b53f9685 drm/amd/pm: add unique_id for gfx12
Expose unique_id for gfx12

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 16fbc18cb0)
Cc: stable@vger.kernel.org # 6.12.x
2025-03-18 16:26:53 -04:00
David Rosca
7fc0765208 drm/amdgpu: Remove JPEG from vega and carrizo video caps
JPEG is only supported for VCN1+.

Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a6e7b06bd)
Cc: stable@vger.kernel.org
2025-03-18 16:26:12 -04:00
David Rosca
ec33964d9d drm/amdgpu: Fix JPEG video caps max size for navi1x and raven
8192x8192 is the maximum supported resolution.

Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6e0d2fde3a)
Cc: stable@vger.kernel.org
2025-03-18 16:25:46 -04:00
David Rosca
f0105e1731 drm/amdgpu: Fix MPEG2, MPEG4 and VC1 video caps max size
1920x1088 is the maximum supported resolution.

Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1a0807feb9)
Cc: stable@vger.kernel.org
2025-03-18 16:25:16 -04:00
Nikita Zhandarovich
dd8689b52a drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse()
On the off chance that command stream passed from userspace via
ioctl() call to radeon_vce_cs_parse() is weirdly crafted and
first command to execute is to encode (case 0x03000001), the function
in question will attempt to call radeon_vce_cs_reloc() with size
argument that has not been properly initialized. Specifically, 'size'
will point to 'tmp' variable before the latter had a chance to be
assigned any value.

Play it safe and init 'tmp' with 0, thus ensuring that
radeon_vce_cs_reloc() will catch an early error in cases like these.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 2fc5703abd ("drm/radeon: check VCE relocation buffer range v3")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2d52de55f9)
Cc: stable@vger.kernel.org
2025-03-18 16:24:44 -04:00
Johan Hovold
1a7646d784 arm64: dts: qcom: x1e001de-devkit: fix USB retimer reset polarity
The ps8830 retimer reset is active low.

Fix up the retimer nodes which were based on an early version of the
driver which inverted the polarity.

Fixes: 019e1ee32f ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250318074907.13903-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-18 14:51:22 -05:00
Johannes Thumshirn
35fec1089e btrfs: zoned: fix zone finishing with missing devices
If do_zone_finish() is called with a filesystem that has missing devices
(e.g. a RAID file system mounted in degraded mode) it is accessing the
btrfs_device::zone_info pointer, which will not be set if the device
in question is missing.

Check if the device is present (by checking if it has a valid block device
pointer associated) and if not, skip zone finishing for it.

Fixes: 4dcbb8ab31 ("btrfs: zoned: make zone finishing multi stripe capable")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:57 +01:00
Johannes Thumshirn
2bbc4a45e5 btrfs: zoned: fix zone activation with missing devices
If btrfs_zone_activate() is called with a filesystem that has missing
devices (e.g. a RAID file system mounted in degraded mode) it is accessing
the btrfs_device::zone_info pointer, which will not be set if the device in
question is missing.

Check if the device is present (by checking if it has a valid block
device pointer associated) and if not, skip zone activation for it.

Fixes: f9a912a3c4 ("btrfs: zoned: make zone activation multi stripe capable")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:57 +01:00
Filipe Manana
fe84a1e235 btrfs: remove end_no_trans label from btrfs_log_inode_parent()
It's a pointless label as we don't have to do anything under it other
than return from the function. So remove it and directly return from the
function where we used to goto.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:57 +01:00
Filipe Manana
26558ce574 btrfs: simplify condition for logging new dentries at btrfs_log_inode_parent()
There's no point in checking if the inode is a directory as
ctx->log_new_dentries is only set in case we are logging a directory down
the call chain of btrfs_log_inode(). So remove that check making the logic
more simple and while at it add a comment about why use a local variable
to track if we later need to log new dentries.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:56 +01:00
Filipe Manana
37b0c3150b btrfs: remove redundant else statement from btrfs_log_inode_parent()
If we don't need to log new directory dentries, there's no point in having
an else branch just to set 'ret' to zero, as it's already zero because
every time it gets a non-zero value we jump into one of the exit labels.

So remove it, which reduces source code size and the module text size.

Before this change:

  $ size fs/btrfs/btrfs.ko
     text	   data	    bss	    dec	    hex	filename
  1813855	 163737	  16920	1994512	 1e6f10	fs/btrfs/btrfs.ko

After this change:

  $ size fs/btrfs/btrfs.ko
     text	   data	    bss	    dec	    hex	filename
  1813807	 163737	  16920	1994464	 1e6ee0	fs/btrfs/btrfs.ko

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:56 +01:00
Filipe Manana
6f7d81d88b btrfs: use memcmp_extent_buffer() at replay_one_extent()
Instead of using memcmp(), which requires copying both file extent items
from each extent buffer into a local buffer, use memcmp_extent_buffer() so
that we only need to copy one of the file extent items and directly use
the extent buffer of the other file extent item for the comparison.

This reduces code size, saves one memory copy and reduces stack usage.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:55 +01:00
Filipe Manana
e0d5e3b743 btrfs: update outdated comment for overwrite_item()
The function is exclusively used for log replay since commit
3eb4234424 ("btrfs: remove outdated logic from overwrite_item() and add
assertion"), so update the comment so that it doesn't say it can be used
for logging. Also some minor rewording for clarity and while at it
reformat the affected text so that it fits closer to the 80 characters
limit for comments.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:55 +01:00
Filipe Manana
5fbfb3f01d btrfs: use variables to store extent buffer and slot at overwrite_item()
Instead of referring to path->nodes[0] and path->slots[0] multiple times,
which is verbose and confusing since we have an 'eb' and 'slot' variables
as well, introduce local variables 'dst_eb' to point to path->nodes[0] and
'dst_slot' to have path->slots[0], reducing verbosity and making it more
obvious about which extent buffer and slot we are referring to.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:54 +01:00
Filipe Manana
e48264e601 btrfs: avoid unnecessary memory allocation and copy at overwrite_item()
There's no need to allocate memory and copy from both the destination and
source extent buffers to compare if the items are equal, we can instead
use memcmp_extent_buffer() which allows to do only one memory allocation
and copy instead of two.

So use memcmp_extent_buffer() instead of memcmp(), allowing us to avoid
one memory allocation, which can fail or be slow while under memory heavy
pressure, avoid the memory copying and reducing code.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:54 +01:00
Mark Harmstone
9db9c7dd5b btrfs: don't clobber ret in btrfs_validate_super()
Commit 2a9bb78cfd ("btrfs: validate system chunk array at
btrfs_validate_super()") introduces a call to validate_sys_chunk_array()
in btrfs_validate_super(), which clobbers the value of ret set earlier.
This has the effect of negating the validity checks done earlier, making
it so btrfs could potentially try to mount invalid filesystems.

Fixes: 2a9bb78cfd ("btrfs: validate system chunk array at btrfs_validate_super()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:54 +01:00
Qu Wenruo
49990d8fa2 btrfs: prepare btrfs_page_mkwrite() for large folios
This changes the assumption that the folio is always page sized.
(Although the ASSERT() for folio order is still kept as-is).

Just replace the PAGE_SIZE with folio_size().

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:53 +01:00
Qu Wenruo
ebaa602d52 btrfs: prepare extent_io.c for future large folio support
When we're handling folios from filemap, we can no longer assume all
folios are page sized.

Thus for call sites assuming the folio is page sized, change the
PAGE_SIZE usage to folio_size() instead.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:53 +01:00
Qu Wenruo
accaec2cba btrfs: prepare btrfs_launcher_folio() for large folios support
That function is only calling btrfs_qgroup_free_data(), which doesn't
care about the size of the folio.

Just replace the fixed PAGE_SIZE with folio_size().

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:52 +01:00
Qu Wenruo
a416637f90 btrfs: replace PAGE_SIZE with folio_size for subpage.[ch]
Since we can no longer assume all data filemap folios are page sized,
use proper folio_size() calls to determine the folio size, as a
preparation for future large data filemap folios.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:52 +01:00
Qu Wenruo
cb3c11d2f5 btrfs: add a size parameter to btrfs_alloc_subpage()
Since we can no longer assume page sized folio for data filemap folios,
allow btrfs_alloc_subpage() to accept a new parameter, @fsize,
indicating the folio size.

This doesn't follow the regular behavior of passing a folio directly,
because this function is shared by both data and metadata folios, and
for metadata folios we have extra allocation policy to ensure no large
folios whose sizes are larger than nodesize (unless it's page sized).

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:52 +01:00
Qu Wenruo
4c14d5c855 btrfs: subpage: make btrfs_is_subpage() check against a folio
To support large data folios, we can no longer assume every filemap
folio is page sized.

So btrfs_is_subpage() check must be done against a folio.

Thankfully for metadata folios, we have the full control and ensure a
large folio will not be large than nodesize, so
btrfs_meta_is_subpage() doesn't need this change.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:52 +01:00
Qu Wenruo
19e60b2a95 btrfs: add extra warning if delayed iput is added when it's not allowed
Since I have triggered the ASSERT() on the delayed iput too many times,
now is the time to add some extra debug warnings for delayed iput.

All delayed iputs should be queued after all ordered extents finish
their IO and all involved workqueues are flushed.

Thus after the btrfs_run_delayed_iputs() inside close_ctree(), there
should be no more delayed puts added.

So introduce a new BTRFS_FS_STATE_NO_DELAYED_IPUT, set after the above
mentioned timing.  And all btrfs_add_delayed_iput() will check that flag
and give a WARN_ON_ONCE().

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:52 +01:00
Sun YangKai
0aaaf10ae9 btrfs: avoid redundant path slot assignment in btrfs_search_forward()
Move path slot assignment before the condition check to prevent
duplicate assignment. Previously, the slot was set both inside and after
the 'slot >= nritems' block with no change in its value, which is
unnecessary.

Signed-off-by: Sun YangKai <sunk67188@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:52 +01:00
Sun YangKai
10de00c7d4 btrfs: remove unnecessary btrfs_key local variable in btrfs_search_forward()
The 'found_key' variable was only used to temporarily store the found key
before copying it to 'min_key' at the end of the function when returning
success.

Eliminate the 'found_key' variable, and directly store the key into
'min_key' at the exact loop exit points where ret=0 is set, maintaining
identical functionality.

Signed-off-by: Sun YangKai <sunk67188@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:52 +01:00
Sun YangKai
140ac522de btrfs: simplify the return value handling in search_ioctl()
Move the assignment of -EFAULT to within the error condition check
in fault_in_subpage_writeable(). The previous placement outside the
condition could lead to the error value being overwritten by subsequent
assignments, cause unnecessary assignments.

Simplify loop exit logic by removing redundant goto.
The original code used 'goto err' to bypass post-loop processing after
handling errors from btrfs_search_forward(). However, the loop's
termination naturally falls through to the post-loop section, which
already handles 'ret' values. Replacing 'goto err' with 'break'
eliminates redundant control flow, consolidates error handling, and
makes the loop's exit conditions explicit.

Signed-off-by: Sun YangKai <sunk67188@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Filipe Manana
009ca35848 btrfs: tests: fix chunk map leak after failure to add it to the tree
If we fail to add the chunk map to the fs mapping tree we exit
test_rmap_block() without freeing the chunk map. Fix this by adding a
call to btrfs_free_chunk_map() before exiting the test function if the
call to btrfs_add_chunk_map() failed.

Fixes: 7dc66abb5a ("btrfs: use a dedicated data structure for chunk maps")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Boris Burkov
0497dfba98 btrfs: codify pattern for adding block_group to bg_list
Similar to mark_bg_unused() and mark_bg_to_reclaim(), we have a few
places that use bg_list with refcounting, mostly for retrying failures
to reclaim/delete unused.

These have custom logic for handling locking and refcounting the bg_list
properly, but they actually all want to do the same thing, so pull that
logic out into a helper. Unfortunately, mark_bg_unused() does still need
the NEW flag to avoid prematurely marking stuff unused (even if refcount
is fine, we don't want to mess with bg creation), so it cannot use the
new helper.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Boris Burkov
7cbce3cb4c btrfs: explicitly ref count block_group on new_bgs list
All other users of the bg_list list_head increment the refcount when
adding to a list and decrement it when deleting from the list. Just for
the sake of uniformity and to try to avoid refcounting bugs, do it for
this list as well.

This does not fix any known ref-counting bug, as the reference belongs
to a single task (trans_handle is not shared and this represents
trans_handle->new_bgs linkage) and will not lose its original refcount
while that thread is running. And BLOCK_GROUP_FLAG_NEW protects against
ref-counting errors "moving" the block group to the unused list without
taking a ref.

With that said, I still believe it is simpler to just hold the extra ref
count for this list user as well.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Boris Burkov
895c6721d3 btrfs: make btrfs_discard_workfn() block_group ref explicit
Currently, the async discard machinery owns a ref to the block_group
when the block_group is queued on a discard list. However, to handle
races with discard cancellation and the discard workfn, we have a
specific logic to detect that the block_group is *currently* running in
the workfn, to protect the workfn's usage amidst cancellation.

As far as I can tell, this doesn't have any overt bugs (though
finish_discard_pass() and remove_from_discard_list() racing can have a
surprising outcome for the caller of remove_from_discard_list() in that
it is again added at the end).

But it is needlessly complicated to rely on locking and the nullity of
discard_ctl->block_group. Simplify this significantly by just taking a
refcount while we are in the workfn and unconditionally drop it in both
the remove and workfn paths, regardless of if they race.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Boris Burkov
7511e29cf1 btrfs: harden block_group::bg_list against list_del() races
As far as I can tell, these calls of list_del_init() on bg_list cannot
run concurrently with btrfs_mark_bg_unused() or btrfs_mark_bg_to_reclaim(),
as they are in transaction error paths and situations where the block
group is readonly.

However, if there is any chance at all of racing with mark_bg_unused(),
or a different future user of bg_list, better to be safe than sorry.

Otherwise we risk the following interleaving (bg_list refcount in parens)

T1 (some random op)                       T2 (btrfs_mark_bg_unused)
                                        !list_empty(&bg->bg_list); (1)
list_del_init(&bg->bg_list); (1)
                                        list_move_tail (1)
btrfs_put_block_group (0)
                                        btrfs_delete_unused_bgs
                                             bg = list_first_entry
                                             list_del_init(&bg->bg_list);
                                             btrfs_put_block_group(bg); (-1)

Ultimately, this results in a broken ref count that hits zero one deref
early and the real final deref underflows the refcount, resulting in a WARNING.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Boris Burkov
2d8e5168d4 btrfs: fix block group refcount race in btrfs_create_pending_block_groups()
Block group creation is done in two phases, which results in a slightly
unintuitive property: a block group can be allocated/deallocated from
after btrfs_make_block_group() adds it to the space_info with
btrfs_add_bg_to_space_info(), but before creation is completely completed
in btrfs_create_pending_block_groups(). As a result, it is possible for a
block group to go unused and have 'btrfs_mark_bg_unused' called on it
concurrently with 'btrfs_create_pending_block_groups'. This causes a
number of issues, which were fixed with the block group flag
'BLOCK_GROUP_FLAG_NEW'.

However, this fix is not quite complete. Since it does not use the
unused_bg_lock, it is possible for the following race to occur:

btrfs_create_pending_block_groups            btrfs_mark_bg_unused
                                           if list_empty // false
        list_del_init
        clear_bit
                                           else if (test_bit) // true
                                                list_move_tail

And we get into the exact same broken ref count and invalid new_bgs
state for transaction cleanup that BLOCK_GROUP_FLAG_NEW was designed to
prevent.

The broken refcount aspect will result in a warning like:

  [1272.943527] refcount_t: underflow; use-after-free.
  [1272.943967] WARNING: CPU: 1 PID: 61 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
  [1272.944731] Modules linked in: btrfs virtio_net xor zstd_compress raid6_pq null_blk [last unloaded: btrfs]
  [1272.945550] CPU: 1 UID: 0 PID: 61 Comm: kworker/u32:1 Kdump: loaded Tainted: G        W          6.14.0-rc5+ #108
  [1272.946368] Tainted: [W]=WARN
  [1272.946585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
  [1272.947273] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
  [1272.947788] RIP: 0010:refcount_warn_saturate+0xba/0x110
  [1272.949532] RSP: 0018:ffffbf1200247df0 EFLAGS: 00010282
  [1272.949901] RAX: 0000000000000000 RBX: ffffa14b00e3f800 RCX: 0000000000000000
  [1272.950437] RDX: 0000000000000000 RSI: ffffbf1200247c78 RDI: 00000000ffffdfff
  [1272.950986] RBP: ffffa14b00dc2860 R08: 00000000ffffdfff R09: ffffffff90526268
  [1272.951512] R10: ffffffff904762c0 R11: 0000000063666572 R12: ffffa14b00dc28c0
  [1272.952024] R13: 0000000000000000 R14: ffffa14b00dc2868 R15: 000001285dcd12c0
  [1272.952850] FS:  0000000000000000(0000) GS:ffffa14d33c40000(0000) knlGS:0000000000000000
  [1272.953458] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [1272.953931] CR2: 00007f838cbda000 CR3: 000000010104e000 CR4: 00000000000006f0
  [1272.954474] Call Trace:
  [1272.954655]  <TASK>
  [1272.954812]  ? refcount_warn_saturate+0xba/0x110
  [1272.955173]  ? __warn.cold+0x93/0xd7
  [1272.955487]  ? refcount_warn_saturate+0xba/0x110
  [1272.955816]  ? report_bug+0xe7/0x120
  [1272.956103]  ? handle_bug+0x53/0x90
  [1272.956424]  ? exc_invalid_op+0x13/0x60
  [1272.956700]  ? asm_exc_invalid_op+0x16/0x20
  [1272.957011]  ? refcount_warn_saturate+0xba/0x110
  [1272.957399]  btrfs_discard_cancel_work.cold+0x26/0x2b [btrfs]
  [1272.957853]  btrfs_put_block_group.cold+0x5d/0x8e [btrfs]
  [1272.958289]  btrfs_discard_workfn+0x194/0x380 [btrfs]
  [1272.958729]  process_one_work+0x130/0x290
  [1272.959026]  worker_thread+0x2ea/0x420
  [1272.959335]  ? __pfx_worker_thread+0x10/0x10
  [1272.959644]  kthread+0xd7/0x1c0
  [1272.959872]  ? __pfx_kthread+0x10/0x10
  [1272.960172]  ret_from_fork+0x30/0x50
  [1272.960474]  ? __pfx_kthread+0x10/0x10
  [1272.960745]  ret_from_fork_asm+0x1a/0x30
  [1272.961035]  </TASK>
  [1272.961238] ---[ end trace 0000000000000000 ]---

Though we have seen them in the async discard workfn as well. It is
most likely to happen after a relocation finishes which cancels discard,
tears down the block group, etc.

Fix this fully by taking the lock around the list_del_init + clear_bit
so that the two are done atomically.

Fixes: 0657b20c5a ("btrfs: fix use-after-free of new block group that became unused")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Filipe Manana
f378b4c3e3 btrfs: remove unnecessary fs_info argument from btrfs_add_block_group_cache()
The fs_info can be taken from the given block group, so there is no need
to pass it as an argument. Also rename the local variable from 'info' to
'fs_info' which is more widely used, more clear and to be more consistent.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:51 +01:00
Filipe Manana
20faaab2c3 btrfs: remove unnecessary fs_info argument from delete_block_group_cache()
The fs_info can be taken from the given block group, so there is no need
to pass it as an argument.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Filipe Manana
f75a043737 btrfs: remove unnecessary fs_info argument from create_reloc_inode()
The fs_info can be taken from the given block group, so there is no need
to pass it as an argument.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Filipe Manana
92be661a57 btrfs: make btrfs_iget_path() return a btrfs inode instead
It's an internal function and btrfs_iget() is now returning a btrfs inode,
so change btrfs_iget_path() to also return a btrfs inode instead of a VFS
inode.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Filipe Manana
b204e5c7d4 btrfs: make btrfs_iget() return a btrfs inode instead
It's an internal function and most of the time the callers are doing a lot
of BTRFS_I() calls on the returned VFS inode to get the btrfs inode, so
change the return type to struct btrfs_inode instead.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Filipe Manana
14d063ec85 btrfs: pass a btrfs_inode to fixup_inode_link_count()
fixup_inode_link_count() mostly wants to use a btrfs_inode, plus it's an
internal function so it should take btrfs_inode instead of a VFS inode.
Change the argument type to btrfs_inode, avoiding several BTRFS_I() calls
too.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Filipe Manana
b4c50cbb01 btrfs: return a btrfs_inode from read_one_inode()
All callers of read_one_inode() are mostly interested in the btrfs_inode
structure rather than the VFS inode, so make read_one_inode() return
the btrfs_inode instead, avoiding lots of BTRFS_I() calls.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Filipe Manana
a488d8ac2c btrfs: return a btrfs_inode from btrfs_iget_logging()
All callers of btrfs_iget_logging() are interested in the btrfs_inode
structure rather than the VFS inode, so make btrfs_iget_logging() return
the btrfs_inode instead, avoiding lots of BTRFS_I() calls.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Mark Harmstone
7ef3cbf17d btrfs: avoid linker error in btrfs_find_create_tree_block()
The inline function btrfs_is_testing() is hardcoded to return 0 if
CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set. Currently we're relying on
the compiler optimizing out the call to alloc_test_extent_buffer() in
btrfs_find_create_tree_block(), as it's not been defined (it's behind an
 #ifdef).

Add a stub version of alloc_test_extent_buffer() to avoid linker errors
on non-standard optimization levels. This problem was seen on GCC 14
with -O0 and is helps to see symbols that would be otherwise optimized
out.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00
Qu Wenruo
df94a342ef btrfs: run btrfs_error_commit_super() early
[BUG]
Even after all the error fixes related the
"ASSERT(list_empty(&fs_info->delayed_iputs));" in close_ctree(), I can
still hit it reliably with my experimental 2K block size.

[CAUSE]
In my case, all the error is triggered after the fs is already in error
status.

I find the following call trace to be the cause of race:

           Main thread                       |     endio_write_workers
---------------------------------------------+---------------------------
close_ctree()                                |
|- btrfs_error_commit_super()                |
|  |- btrfs_cleanup_transaction()            |
|  |  |- btrfs_destroy_all_ordered_extents() |
|  |     |- btrfs_wait_ordered_roots()       |
|  |- btrfs_run_delayed_iputs()              |
|                                            | btrfs_finish_ordered_io()
|                                            | |- btrfs_put_ordered_extent()
|                                            |    |- btrfs_add_delayed_iput()
|- ASSERT(list_empty(delayed_iputs))         |
   !!! Triggered !!!

The root cause is that, btrfs_wait_ordered_roots() only wait for
ordered extents to finish their IOs, not to wait for them to finish and
removed.

[FIX]
Since btrfs_error_commit_super() will flush and wait for all ordered
extents, it should be executed early, before we start flushing the
workqueues.

And since btrfs_error_commit_super() now runs early, there is no need to
run btrfs_run_delayed_iputs() inside it, so just remove the
btrfs_run_delayed_iputs() call from btrfs_error_commit_super().

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18 20:35:50 +01:00