For several zoned storage devices, vendors will provide extra space
which was used for device level GC than specs and F2FS can use this
space for filesystem level GC. To do that, we can reserve the space
using reserved_blocks. However, it is not enough, since this extra
space should not be shown to users. So, with this new sysfs node,
we can hide the space by substracting reserved_blocks from total
bytes.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The page table population code in map_range() uses a recursive algorithm
to create the early mappings of the kernel, the DTB and the ID mapped
text and data pages, and this fails to take into account that the way
these page tables may be constructed is not precisely the same at each
level. In particular, block mappings are not permitted at each level,
and the code as it exists today might inadvertently create such a
forbidden block mapping if it were used to map a region of the
appropriate size and alignment.
This never happens in practice, given the limited size of the assets
being mapped by the early boot code. Nonetheless, it would be better if
this code would behave correctly in all circumstances.
So only permit block mappings at level 2, and page mappings at level 3,
for any page size, and use table mappings exclusively at all other
levels. This change should have no impact in practice, but it makes the
code more robust.
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250311073043.96795-2-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Under VMware hypervisors, SEV-SNP enabled VMs are fundamentally able to boot
without UEFI, but this regressed a year ago due to:
0f4a1e8098 ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
In this case, mpparse_find_mptable() has to be called to parse MP
tables which contains the necessary boot information.
[ mingo: Updated the changelog. ]
Fixes: 0f4a1e8098 ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
Co-developed-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ye Li <ye.li@broadcom.com>
Reviewed-by: Kevin Loughlin <kevinloughlin@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250313173111.10918-1-ajay.kaher@broadcom.com
No known regressions outstanding.
Current release - regressions:
- wifi: nl80211: fix assoc link handling
- eth: lan78xx: sanitize return values of register read/write functions
Current release - new code bugs:
- ethtool: tsinfo: fix dump command
- bluetooth: btusb: configure altsetting for HCI_USER_CHANNEL
- eth: mlx5: DR, use the right action structs for STEv3
Previous releases - regressions:
- netfilter: nf_tables: make destruction work queue pernet
- gre: fix IPv6 link-local address generation.
- wifi: iwlwifi: fix TSO preparation
- bluetooth: revert "bluetooth: hci_core: fix sleeping function called from invalid context"
- ovs: revert "openvswitch: switch to per-action label counting in conntrack"
- eth: ice: fix switchdev slow-path in LAG
- eth: bonding: fix incorrect MAC address setting to receive NS messages
Previous releases - always broken:
- core: prevent TX of unreadable skbs
- sched: prevent creation of classes with TC_H_ROOT
- netfilter: nft_exthdr: fix offset with ipv4_find_option()
- wifi: cfg80211: cancel wiphy_work before freeing wiphy
- mctp: copy headers if cloned
- phy: nxp-c45-tja11xx: add errata for TJA112XA/B
- eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
- eth: mlx5: bridge, fix the crash caused by LAG state check
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=lIrc
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, bluetooth and wireless.
No known regressions outstanding.
Current release - regressions:
- wifi: nl80211: fix assoc link handling
- eth: lan78xx: sanitize return values of register read/write
functions
Current release - new code bugs:
- ethtool: tsinfo: fix dump command
- bluetooth: btusb: configure altsetting for HCI_USER_CHANNEL
- eth: mlx5: DR, use the right action structs for STEv3
Previous releases - regressions:
- netfilter: nf_tables: make destruction work queue pernet
- gre: fix IPv6 link-local address generation.
- wifi: iwlwifi: fix TSO preparation
- bluetooth: revert "bluetooth: hci_core: fix sleeping function
called from invalid context"
- ovs: revert "openvswitch: switch to per-action label counting in
conntrack"
- eth:
- ice: fix switchdev slow-path in LAG
- bonding: fix incorrect MAC address setting to receive NS
messages
Previous releases - always broken:
- core: prevent TX of unreadable skbs
- sched: prevent creation of classes with TC_H_ROOT
- netfilter: nft_exthdr: fix offset with ipv4_find_option()
- wifi: cfg80211: cancel wiphy_work before freeing wiphy
- mctp: copy headers if cloned
- phy: nxp-c45-tja11xx: add errata for TJA112XA/B
- eth:
- bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
- mlx5: bridge, fix the crash caused by LAG state check"
* tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
net: mana: cleanup mana struct after debugfs_remove()
net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
net/mlx5: Bridge, fix the crash caused by LAG state check
net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch
net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
net/mlx5: HWS, Rightsize bwc matcher priority
net/mlx5: DR, use the right action structs for STEv3
Revert "openvswitch: switch to per-action label counting in conntrack"
net: openvswitch: remove misbehaving actions length check
selftests: Add IPv6 link-local address generation tests for GRE devices.
gre: Fix IPv6 link-local address generation.
netfilter: nft_exthdr: fix offset with ipv4_find_option()
selftests/tc-testing: Add a test case for DRR class with TC_H_ROOT
net_sched: Prevent creation of classes with TC_H_ROOT
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHz
qlcnic: fix memory leak issues in qlcnic_sriov_common.c
rtase: Fix improper release of ring list entries in rtase_sw_reset
...
Now that all abuse is gone and the legit users are converted to
guard(msi_descs_lock), rename the lock functions and document them as
internal.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/all/20250313130322.027190131@linutronix.de
The driver abuses the MSI descriptors for internal purposes. Aside of core
code and MSI providers nothing has to care about their existence. They have
been encapsulated with a lot of effort because this kind of abuse caused
all sorts of issues including a maintainability nightmare.
Rewrite the code so it uses dedicated storage to hand the required
information to the interrupt handler.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250313130321.963504017@linutronix.de
The driver walks the MSI descriptors to test whether a descriptor exists
for a given index. That's just abuse of the MSI internals.
The same test can be done with a single function call by looking up whether
there is a Linux interrupt number assigned at the index.
What's worse is that the function is completely unserialized against
modifications of the MSI-X control by operations issued from the interrupt
core. It also brings the PCI/MSI-X internal cached control word out of
sync.
Remove the trainwreck and invoke the function provided by the PCI/MSI core
to update it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250313130321.898592817@linutronix.de
The PCI/TPH driver fiddles with the MSI-X control word of an active
interrupt completely unserialized against concurrent operations issued
from the interrupt core. It also brings the PCI/MSI-X internal cached
control word out of sync.
Provide a function, which has the required serialization and keeps the
control word cache in sync.
Unfortunately this requires to look up and lock the interrupt descriptor,
which should be only done in the interrupt core code. But confining this
particular oddity in the PCI/MSI core is the lesser of all evil. A
interrupt core implementation would require a larger pile of infrastructure
and indirections for dubious value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250313130321.822790423@linutronix.de
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250313130321.758905320@linutronix.de
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20250313130321.695027112@linutronix.de
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/all/20250313130321.631772601@linutronix.de
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/all/20250313130321.568379110@linutronix.de
Provide a lock guard for MSI descriptor locking and update the core code
accordingly.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20250313130321.506045185@linutronix.de
In cases where an allocation is consumed by another function, the
allocation needs to be retained on success or freed on failure. The code
pattern is usually:
struct foo *f = kzalloc(sizeof(*f), GFP_KERNEL);
struct bar *b;
,,,
// Initialize f
...
if (ret)
goto free;
...
bar = bar_create(f);
if (!bar) {
ret = -ENOMEM;
goto free;
}
...
return 0;
free:
kfree(f);
return ret;
This prevents using __free(kfree) on @f because there is no canonical way
to tell the cleanup code that the allocation should not be freed.
Abusing no_free_ptr() by force ignoring the return value is not really a
sensible option either.
Provide an explicit macro retain_ptr(), which NULLs the cleanup
pointer. That makes it easy to analyze and reason about.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20250313130321.442025758@linutronix.de
Fix memory corruption due to incorrect parameter being passed to bio_init
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.5+
Fixes: 1d9a943898 ("dm flakey: clone pages on write bio before corrupting them")
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ9Ke9AAKCRCRxhvAZXjc
ojQQAQC8JuVU5KbdbARMd/gylAEd7YrSHQv/KVfLAP3p0CQkNwEAx0t0bERUa+pt
V5+7YS+HY2hcvFW6GbO/MJvfiSuXxA0=
=9aCX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.14-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Bring in an RCU pathwalk fix for afs. This is brought in as a merge
from the vfs-6.15.shared.afs branch that needs this commit and other
trees already depend on it.
- Fix vboxfs unterminated string handling.
* tag 'vfs-6.14-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
vboxsf: Add __nonstring annotations for unterminated strings
afs: Fix afs_atcell_get_link() to handle RCU pathwalk
Current minimum required version of binutils is 2.25, which
supports XSAVE{,OPT,C,S} and XRSTOR{,S} instruction mnemonics.
Replace the byte-wise specification of XSAVE{,OPT,C,S}
and XRSTOR{,S} with these proper mnemonics.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250313130251.383204-1-ubizjak@gmail.com
This improves the failure output by pointing to the failing line at the
top level of the test, e.g.:
# test_number: EXPECTATION FAILED at lib/printf_kunit.c:103
lib/printf_kunit.c:167: vsnprintf(buf, 256, "%#-12x", ...) wrote '0x1234abcd ', expected '0x1234abce '
# test_number: EXPECTATION FAILED at lib/printf_kunit.c:142
lib/printf_kunit.c:167: kvasprintf(..., "%#-12x", ...) returned '0x1234abcd ', expected '0x1234abce '
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250307-printf-kunit-convert-v6-3-4d85c361c241@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Move all tests into `printf_test_cases`. This gives us nicer output in
the event of a failure.
Combine `plain_format` and `plain_hash` into `hash_pointer` since
they're testing the same scenario.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250307-printf-kunit-convert-v6-2-4d85c361c241@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Convert the printf() self-test to a KUnit test.
In the interest of keeping the patch reasonably-sized this doesn't
refactor the tests into proper parameterized tests - it's all one big
test case.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250307-printf-kunit-convert-v6-1-4d85c361c241@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Smatch noticed that inode_getblk() can return 1 on successful mapping of
a block instead of expected 0 after commit b405c1e58b ("udf: refactor
udf_next_aext() to handle error"). This could confuse some of the
callers and lead to strange failures (although the one reported by
Smatch in udf_mkdir() is impossible to trigger in practice). Fix the
return value of inode_getblk().
Link: https://lore.kernel.org/all/cb514af7-bbe0-435b-934f-dd1d7a16d2cd@stanley.mountain
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Fixes: b405c1e58b ("udf: refactor udf_next_aext() to handle error")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
To permit the EFI stub to call this code even when building the kernel
without the legacy decompressor, move the trampoline out of the latter's
startup code.
This is part of an ongoing WIP effort on my part to make the existing,
generic EFI zboot format work on x86 as well.
No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250313120324.1095968-2-ardb+git@google.com
scx_bpf_reenqueue_local() can be invoked from ops.cpu_release() to give
tasks that are queued to the local DSQ a chance to migrate to other
CPUs, when a CPU is taken by a higher scheduling class.
However, there is no point re-enqueuing tasks that can only run on that
particular CPU, as they would simply be re-added to the same local DSQ
without any benefit.
Therefore, skip per-CPU tasks in scx_bpf_reenqueue_local().
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
get_random_u32_below() has a better algorithm than bch2_rand_range(),
it just didn't exist at the time.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If devm_add_action_or_reset() isn't successful, xe_eu_stall_fini()
is invoked. So, unsuccessful return from devm_add_action_or_reset()
shouldn't dereference gt->eu_stall as xe_eu_stall_fini() already
frees it. Fix this issue.
Fixes: 9a0b11d4cf ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eae49a414a7314921108e0388810aaee6261ad92.1741800396.git.harish.chegondi@intel.com
crtc->mode is legacy junk and shouldn't really be used with
atomic drivers.
Most (all?) atomic drivers do end up still calling
drm_atomic_helper_update_legacy_modeset_state() at some
point, so crtc->mode does still get populated, and this
does work for now. But now that the modes[] lifetime issues
have been sorted out we can just switch over to the
proper crtc->state->mode.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
drm_client_firmware_config() is currently picking up the current
mode of the crtc via the legacy crtc->mode, which is not supposed
to be used by atomic drivers at all. We can't simply switch over
to the proper crtc->state->mode because we drop the crtc->mutex
(which protects crtc->state) before the mode gets used.
The most straightforward solution to extend the lifetime of
modes[] seem to be to make full copies of the modes.
And with this we can undo also commit 3eadd887db
("drm/client:Fully protect modes[] with dev->mode_config.mutex")
as the lifetime of modes[] no longer has anything to do with
that lock.
v2: Don't try to copy NULL modes
v3: Keep storing pointers and use drm_mode_{duplicate,destroy}()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the array notation rather that the pointer notation for
function arguments. This makes it clear to the reader that
we are in fact dealing with an array rather than a single
pointer. Functionally the two are equivalent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-3-ville.syrjala@linux.intel.com
The modes used by the client code live on the connectors' mode
lists, which are not owned by the client code, and thus it has
no business modifying the modes. Mark the modes const to make
that fact abundantly clear.
v2: Fix up the kunit test
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303093847.7698-1-ville.syrjala@linux.intel.com
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)
-----BEGIN PGP SIGNATURE-----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=rHqU
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.14-2025-03-13' of git://git.infradead.org/nvme into block-6.14
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)"
* tag 'nvme-6.14-2025-03-13' of git://git.infradead.org/nvme:
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP
leds-st1202 requires the LED Pattern Trigger (LEDS_TRIGGER_PATTERN), which
is not selected when LED Trigger support is (LEDS_TRIGGERS).
To reproduce this:
- make menuconfig KCONFIG_CONFIG=
- select LEDS_ST1202 dependencies OF, I2C and LEDS_CLASS.
- select LEDS_ST1202
- LEDS_TRIGGERS is selected but LEDS_TRIGGER_PATTERN isn't.
The absence of LEDS_TRIGGER_PATTERN explicitly required can lead to builds
in which LEDS_ST1202 is selected while LEDS_TRIGGER_PATTERN isn't. The direct
result of that would be that /sys/class/leds/<led>/hw_pattern wouldn't be
available and there would be no way of interacting with the driver and
hardware from user space.
Add select LEDS_TRIGGER_PATTERN to Kconfig to meet the requirement and
indirectly document it as well.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB5473F4DF3A668F7DD057A280C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Minor edits regarding use of spacing and proofreading.
There is a minor inconsistency in the use of spacing as margin in
one of the comments providing details about the datasheet.
There is also a typo that comes from the datasheet itself.
Change spacing on comment and correct typo.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB547333EFFFBFFA840225BC02C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Arguably, there are more chances of errors occurring during the
initialization of the hardware, so this should complete successfully
before the devicetree node's children are initialized.
st1202_dt_init() fills the led_classdev struct.
st1202_setup() initializes the hardware. Specifically, resets the chip,
enables its phase-shift delay feature, enables the device and disables all
the LEDs channels. All that writing to registers, with no input from
st1202_dt_init().
Real-world testing corroborates that calling st1202_setup() before
st1202_dt_init() doesn't cause any issue during initialization.
Switch the order of st1202_dt_init() and st1202_setup() to ensure the
hardware is correctly initialized before the led_classdev struct is
filled.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB54731877A8DC54EDD33F0229C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
DSP on i.MX8MP doesn't have a direct reset line so according to hardware
design team in order to handle assert/deassert/reset functionality we
need to use a combination of control bits from two modules. Audio block
control module for Run/Stall control of the DSP and DAP module in order
to do software reset.
In a first step, for i.MX8MP we are switching on using the reset
controller API to handle the DSP Run/Stall bits i.MX8MP. This comes with
the advantage of offering a better probe ordering and a more natural way
of abstracting the Audio block control bits.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-9-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
We can Run/Stall the DSP via audio block control bits found in audiomix.
Implement this functionality using the reset controller and use assert
for Stall and deassert for Run.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-8-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
For EARC and EARC PHY the reset happens when clearing the reset bits.
Refactor assert/deassert function in order to take into account the
active_low configuration option.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20250311085812.1296243-7-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Current code supports EARC PHY Software Reset and EARC Software Reset
but it is not easily extensible to more reset bits.
So, refactor the code in order to easily allow more reset bits in the
future.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-6-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This adds IMX8MP_AUDIOMIX_ prefix to internal macros in order to show
that specific macros are related to audiomix.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20250311085812.1296243-5-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Assert and deassert functionality of the DSP found on i.MX8MP is
realized by combining control bits from two modules: Audio Block
Control and Debug Access Port.
Audio block control bits are used to Run/Stall the DSP core
while the DAP bits are used for software reset the core.
The original plan was to use fsl,dsp-ctrl property and to refer the
audiomix bits via syscon interface. This proposal received NACK from
community we shouldn't abuse the syscon interface [1].
So remove fsl,dsp-ctrl property for i.MX8MP and use reset control
interface instead.
Example dts node only uses runstall control now, but softreset will
be added in the future when we will convert the softreset functionality
to use reset controller API.
[1] https://patchwork.kernel.org/project/imx/patch/20250212085222.107102-6-daniel.baluta@nxp.com/
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-3-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add reset ids used for EARC and DSP on i.MX8MP platform.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-2-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>