A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
Fixes: 78d9f48f7f ("netfilter: nf_tables: add devices to existing flowtable")
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a8919758 ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Blamed commit broke the check for a null scratch map:
- if (unlikely(!m || !*raw_cpu_ptr(m->scratch)))
+ if (unlikely(!raw_cpu_ptr(m->scratch)))
This should have been "if (!*raw_ ...)".
Use the pattern of the avx2 version which is more readable.
This can only be reproduced if avx2 support isn't available.
Fixes: d8d871a35c ("netfilter: nft_set_pipapo: merge pipapo_get/lookup")
Signed-off-by: Florian Westphal <fw@strlen.de>
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
$ xfs_io -c "fsmap -d" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128 /* sb */
1: 253:48 [128..255]: special 102:1 128 /* gdt */
3: 253:48 [256..383]: special 102:3 128 /* block bitmap */
4: 253:48 [384..2303]: unknown 1920 /* flex bg empty space */
5: 253:48 [2304..2431]: special 102:4 128 /* inode bitmap */
6: 253:48 [2432..4351]: unknown 1920 /* flex bg empty space */
7: 253:48 [4352..6911]: inodes 2560
8: 253:48 [6912..538623]: unknown 531712
9: 253:48 [538624..10485759]: free space 9947136
The issue can be seen with:
$ xfs_io -c "fsmap -d 0 3" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [384..2047]: unknown 1664
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
Cc: stable@kernel.org
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Fixes: 4a622e4d47 ("ext4: fix FS_IOC_GETFSMAP handling")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/e7472c8535c9c5ec10f425f495366864ea12c9da.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This if branch is only jumping to 'out' which
is defined just after the branch itself.
Hence this is if-check is a no-op and can be removed.
Address-Coverity-ID: 1647981 ("Incorrect expression (IDENTICAL_BRANCHES)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://patch.msgid.link/20250721200902.1071-1-antonio@mandelbit.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
# ln -s foo /mnt/tmp/bar
# setfattr -h -n trusted.test \
-v "$(yes | head -n 4000)" /mnt/tmp/bar
# umount /mnt/tmp
# mount /mnt/tmp
# ls -l /mnt/tmp
ls: cannot access '/mnt/tmp/bar': Structure needs cleaning
total 4
? l?????????? ? ? ? ? ? bar
# dmesg | tail -1
EXT4-fs error (device dm-8): __ext4_iget:5098:
inode #24578: block 7303014: comm ls: invalid block
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org
Fixes: fc82228a5e ("ext4: support fast symlinks from ext3 file systems")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121
Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff2030739 ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff2030739 ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check a race where data disappears from the TCP socket after
TLS signaled that its ready to receive.
ok 6 global.data_steal
# RUN tls_basic.base_base ...
# OK tls_basic.base_base
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://lore.kernel.org/tFjq_kf7sWIG3A7CrCg_egb8CVsT_gsmHAK0_wxDPJXfIzxFAMxqmLwp3MlU5EHiet0AwwJldaaFdgyHpeIUCS-3m3llsmRzp9xIOBR4lAI=@syst3mfailure.io
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Display `i_version` in `/proc/fs/ext4/sdx/options`, even though it's
default enabled. This aids users managing multi-version scenarios and
simplifies debugging.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
syzbot reported the following ABBA deadlock:
CPU0 CPU1
---- ----
n_vclocks_store()
lock(&ptp->n_vclocks_mux) [1]
(physical clock)
pc_clock_adjtime()
lock(&clk->rwsem) [2]
(physical clock)
...
ptp_clock_freerun()
ptp_vclock_in_use()
lock(&ptp->n_vclocks_mux) [3]
(physical clock)
ptp_clock_unregister()
posix_clock_unregister()
lock(&clk->rwsem) [4]
(virtual clock)
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad
Fixes: 73f37068d5 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Users of the ixgbe driver report that after adding devlink support by
the commit a0285236ab ("ixgbe: add initial devlink support") their
configs got broken due to unwanted changes of interface names. It's
caused by automatic phys_port_name generation during devlink port
initialization flow.
To prevent from that set no_phys_port_name flag for ixgbe devlink ports.
Reported-by: David Howells <dhowells@redhat.com>
Closes: https://lore.kernel.org/netdev/3452224.1745518016@warthog.procyon.org.uk/
Reported-by: David Kaplan <David.Kaplan@amd.com>
Closes: https://lore.kernel.org/netdev/LV3PR12MB92658474624CCF60220157199470A@LV3PR12MB9265.namprd12.prod.outlook.com/
Fixes: a0285236ab ("ixgbe: add initial devlink support")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.
This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.
Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/all/nbwrfnjhvrcduqzjl4a2jafnvvud6qsbxlvxaxilnryglf4j7r@btuqrimnfuly/
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During process kill, drm_sched_entity_flush() will kill the vm
entities. The following job submissions of this process will fail, and
the resources of these jobs have not been released, nor have the fences
been signalled, causing tasks to hang and timeout.
Fix by check entity status in amdgpu_vm_ready() and avoid submit jobs to
stopped entity.
v2: add amdgpu_vm_ready() check before amdgpu_vm_clear_freed() in
function amdgpu_cs_vm_handling().
Fixes: 1f02f2044b ("drm/amdgpu: Avoid extra evict-restore process.")
Signed-off-by: Liu01 Tong <Tong.Liu01@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f101c13a87)
calc_clk_div() will only return a non-zero value (-EINVAL)
in case of error. On the other hand, req->rate is an unsigned long.
It seems quite odd that req->rate would be assigned a negative value,
which is clearly not a rate, and success would be returned.
Reinstate previous logic, which would just return error.
Fixes: afd529d740 ("ASoC: stm: stm32_i2s: convert from round_rate() to determine_rate()")
Link: https://scan7.scan.coverity.com/#/project-view/53936/11354?selectedIssue=1647702
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Link: https://patch.msgid.link/20250729020052.404617-1-sperezglz@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It should use vm flags instead of pte flags
to specify bo vm attributes.
Fixes: 7946340fa3 ("drm/amdgpu: Move csa related code to separate file")
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b08425fa77)
The vram block allocation flag must be cleared
before making vram reservation, otherwise reserving
addresses within the currently freed memory range
will always fail.
Fixes: c9cad937c0 ("drm/amdgpu: add drm buddy support to amdgpu")
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d38eaf27de)
The fw reserved GFX command is only supported starting from PSP fw
version 0x3a0e14 and 0x3b0e0d. Older versions do not support this command.
Add a version guard to ensure the command is only used when the running
PSP fw meets the minimum version requirement.
This ensures backward compatibility and safe operation across fw
revisions.
Fixes: a3b7f9c306 ("drm/amdgpu: reclaim psp fw reservation memory region")
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 065e23170a)
Ring provided buffers are potentially only valid within the single
execution context in which they were acquired. io_uring deals with this
and invalidates them on retry. But on the networking side, if
MSG_WAITALL is set, or if the socket is of the streaming type and too
little was processed, then it will hang on to the buffer rather than
recycle or commit it. This is problematic for two reasons:
1) If someone unregisters the provided buffer ring before a later retry,
then the req->buf_list will no longer be valid.
2) If multiple sockers are using the same buffer group, then multiple
receives can consume the same memory. This can cause data corruption
in the application, as either receive could land in the same
userspace buffer.
Fix this by disallowing partial retries from pinning a provided buffer
across multiple executions, if ring provided buffers are used.
Cc: stable@vger.kernel.org
Reported-by: pt x <superman.xpt@gmail.com>
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
`rustdoc` can get confused when generating documentation into a folder
that contains generated files from other `rustdoc` versions.
For instance, running something like:
rustup default 1.78.0
make LLVM=1 rustdoc
rustup default 1.88.0
make LLVM=1 rustdoc
may generate errors like:
error: couldn't generate documentation: invalid template: last line expected to start with a comment
|
= note: failed to create or modify "./Documentation/output/rust/rustdoc/src-files.js"
Thus just always clean the output folder before generating the
documentation -- we are anyway regenerating it every time the `rustdoc`
target gets called, at least for the time being.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Daniel Almeida <daniel.almeida@collabora.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089/topic/x/near/527201113
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://lore.kernel.org/r/20250726133435.2460085-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaJtqogAKCRBZ7Krx/gZQ
6+FEAQDw4ljGzHf0Yi8Fv7kDYKdRhetqaY8jR0FOOn0gsOkoagEAmEUsczpRnRar
5rGnHKImSBPYShduUbStsap8OxtlzwA=
=YmfX
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull habanalabs fix from Al Viro:
"Yet another use-after-free fix due to dma_buf_fd() misuse"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
habanalabs: fix UAF in export_dmabuf()
Starting with Rust 1.88.0 (released 2025-06-26), `rustdoc` complains
about a target modifier mismatch in configurations where `-Zfixed-x18`
is passed:
error: mixing `-Zfixed-x18` will cause an ABI mismatch in crate `rust_out`
|
= help: the `-Zfixed-x18` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zfixed-x18` in this crate is incompatible with `-Zfixed-x18=` in dependency `core`
= help: set `-Zfixed-x18=` in this crate or unset `-Zfixed-x18` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=fixed-x18` to silence this error
The reason is that `rustdoc` was not passing the target modifiers when
configuring the session options, and thus it would report a mismatch
that did not exist as soon as a target modifier is used in a dependency.
We did not notice it in the kernel until now because `-Zfixed-x18` has
been a target modifier only since 1.88.0 (and it is the only one we use
so far).
The issue has been reported upstream [1] and a fix has been submitted
[2], including a test similar to the kernel case.
[ This is now fixed upstream (thanks Guillaume for the quick review),
so it will be fixed in Rust 1.90.0 (expected 2025-09-18).
- Miguel ]
Meanwhile, conditionally pass `-Cunsafe-allow-abi-mismatch=fixed-x18`
to workaround the issue on our side.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/rust-for-linux/36cdc798-524f-4910-8b77-d7b9fac08d77@oss.qualcomm.com/
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250727092317.2930617-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
d7d8ab87e3 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") added a
WARN_ON sanity check that child devices support MSI-X, because VMD document
says [1]:
Intel VMD only supports MSIx Interrupts from child devices and therefore
the BIOS must enable PCIe Hot Plug and MSIx interrups [sic].
However, the VMD device can't even tell the difference between a child
device using MSI and one using MSI-X. Per 185a383ada ("x86/PCI: Add
driver for Intel Volume Management Device (VMD)"), VMD does not support
INTx interrupts, but does support child devices using either MSI or MSI-X.
Remove the sanity check to avoid the WARN_ON and allow child devices to use
MSI, reported by Ammar.
Fixes: d7d8ab87e3 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Link: https://cdrdv2-public.intel.com/776857/VMD_White_Paper.pdf [1]
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/aJXYhfc%2F6DfcqfqF@linux.gnuweeb.org/
Signed-off-by: Nam Cao <namcao@linutronix.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://patch.msgid.link/20250811053935.4049211-1-namcao@linutronix.de
It turns out that the ECDT table inside the ThinkBook 14 G7 IML
contains a valid EC description but an invalid ID string
("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid
ID string prevents the kernel from detecting the built-in touchpad,
so relax the sanity check of the ID string and only reject ECDTs
with empty ID strings.
Reported-by: Ilya K <me@0upti.me>
Fixes: 7a0d59f6a9 ("ACPI: EC: Ignore ECDT tables with an invalid ID string")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Ilya K <me@0upti.me>
Link: https://patch.msgid.link/20250729062038.303734-1-W_Armin@gmx.de
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Clamp writes to power limits powerX_crit/currX_crit, powerX_cap,
powerX_max, to the maximum supported by the pcode mailbox
when sysfs-provided values exceed this limit.
Although the pcode already performs clamping, values beyond the pcode
mailbox's supported range get truncated, leading to incorrect
critical power settings.
This patch ensures proper clamping to prevent such truncation.
v2:
- Address below review comments. (Riana)
- Split comments into multiple sentences.
- Use local variables for readability.
- Add a debug log.
- Use u64 instead of unsigned long.
v3:
- Change drm_dbg logs to drm_info. (Badal)
v4:
- Rephrase the drm_info log. (Rodrigo, Riana)
- Rename variable max_mbx_power_limit to max_supp_power_limit, as
limit is same for platforms with and without mailbox power limit
support.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a422d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fb1b70607f ("drm/xe/hwmon: Expose power attributes")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250808185310.3466529-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit d301eb950d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When the xe buffer-object shrinker allows GPU waits and write-back,
(typically from kswapd), perform multiple passes, skipping
subsequent passes if the shrinker number of scanned objects target
is reached.
1) Without GPU waits and write-back
2) Without write-back
3) With both GPU-waits and write-back
This is to avoid stalls and costly write- and readbacks unless they
are really necessary.
v2:
- Don't test for scan completion twice. (Stuart Summers)
- Update tags.
Reported-by: melvyn <melvyn2@dnsense.pub>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5557
Cc: Summers Stuart <stuart.summers@intel.com>
Fixes: 00c8efc318 ("drm/xe: Add a shrinker for xe bos")
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250805074842.11359-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 80944d3341)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we hit the error path, the previous fence (if there is one) has
already been put() prior to this, so doing a fence_wait could lead to
UAF. Tweak the flow to do to the put() until after we do the wait.
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-8-matthew.auld@intel.com
(cherry picked from commit 9b7ca35ed2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With non-page aligned copy, we need to use 4 byte aligned pitch, however
the size itself might still be close to our maximum of ~8M, and so the
dimensions of the copy can easily exceed the S16_MAX limit of the copy
command leading to the following assert:
xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed!
platform: BATTLEMAGE subplatform: 1
graphics: Xe2_HPG 20.01 step A0
media: Xe2_HPM 13.01 step A1
tile: 0 VRAM 10.0 GiB
GT: 0 type 1
WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe]
To fix this account for the pitch when calculating the number of current
bytes to copy.
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-7-matthew.auld@intel.com
(cherry picked from commit 8c2d61e0e9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to
using a bounce buffer. However the bounce buffer here is allocated on
the stack, and the only alignment requirement here is that it's
naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce
buffer is also misaligned we then recurse back into the function again,
however the new bounce buffer might also not be aligned, and might never
be until we eventually blow through the stack, as we keep recursing.
Instead of using the stack use kmalloc, which should respect the
power-of-two alignment request here. Fixes a kernel panic when
triggering this path through eudebug.
v2 (Stuart):
- Add build bug check for power-of-two restriction
- s/EINVAL/ENOMEM/
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-6-matthew.auld@intel.com
(cherry picked from commit 38b34e928a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
f29861aa30 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
changed xilinx_pcie::msi_domain from child devices' interrupt domain to
Xilinx AXI bridge's interrupt domain.
However, xilinx_pcie_intr_handler() wasn't changed and still reads Xilinx
AXI bridge's interrupt domain from xilinx_pcie::msi_domain->parent. This
pointer is NULL now.
Update xilinx_pcie_intr_handler() to read the correct interrupt domain
pointer.
Fixes: f29861aa30 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250811054144.4049448-1-namcao@linutronix.de
The gcc_aux_clk is required by the PCIe controller but not by the PCIe
PHY. In PCIe PHY, the source of aux_clk used in low-power mode should
be gcc_phy_aux_clk. Hence, remove gcc_aux_clk and replace it with
gcc_phy_aux_clk.
Fixes: fd2d4e4c19 ("dt-bindings: phy: qcom,qmp: Add sa8775p QMP PCIe PHY")
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250725102231.3608298-2-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.
Fixes: 918ee0d21b ("usb: phy: omap-usb3: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org # 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.
Fixes: 478b6c7436 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org # 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-3-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make sure to drop the references taken to the PMC OF node and device by
of_parse_phandle() and of_find_device_by_node() during probe.
Note the holding a reference to the PMC device does not prevent the
PMC regmap from going away (e.g. if the PMC driver is unbound) so there
is no need to keep the reference.
Fixes: 2d10214872 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210")
Cc: stable@vger.kernel.org # 5.14
Cc: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724131206.2211-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fB9v
-----END PGP SIGNATURE-----
Merge tag 'for-6.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix bug in qgroups reporting incorrect usage for higher level qgroups
- in zoned mode, do not select metadata group as finish target
- convert xarray lock to RCU when trying to release extent buffer to
avoid a deadlock
- do not allow relocation on partially dropped subvolumes, which is
normally not possible but has been reported on old filesystems
- in tree-log, report errors on missing block group when unaccounting
log tree extent buffers
- with large folios, fix range length when processing ordered extents
* tag 'for-6.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix iteration bug in __qgroup_excl_accounting()
btrfs: zoned: do not select metadata BG as finish target
btrfs: do not allow relocation of partially dropped subvolumes
btrfs: error on missing block group when unaccounting log tree extent buffers
btrfs: fix wrong length parameter for btrfs_cleanup_ordered_extents()
btrfs: make btrfs_cleanup_ordered_extents() support large folios
btrfs: fix subpage deadlock in try_release_subpage_extent_buffer()
SNP guest which makes sure all cache lines belonging to a 4K page are
evicted after latter has been converted to a guest-private page.
-----BEGIN PGP SIGNATURE-----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=8kfV
-----END PGP SIGNATURE-----
Merge tag 'snp_cache_coherency' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
- Add a mitigation for a cache coherency vulnerability when running an
SNP guest which makes sure all cache lines belonging to a 4K page are
evicted after latter has been converted to a guest-private page
[ SNP: Secure Nested Paging - not to be confused with Single Nucleotide
Polymorphism, which is the more common use of that TLA. I am on a
mission to write out the more obscure TLAs in order to keep track of
them.
Because while math tells us that there are only about 17k different
combinations of three-letter acronyms using English letters (26^3), I
am convinced that somehow Intel, AMD and ARM have together figured out
new mathematics, and have at least a million different TLAs that they
use. - Linus ]
* tag 'snp_cache_coherency' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Evict cache lines during SNP memory validation
In converting marvell,comphy-cp110 to schema, the constraints for clocks on
marvell,comphy-a3700 are wrong, the maximum number of child nodes are wrong,
and the phy nodes may have a 'connector' child node:
phy@18300 (marvell,comphy-a3700): clock-names: False schema does not allow ['xtal']
phy@120000 (marvell,comphy-cp110): 'phy@3', 'phy@4', 'phy@5' do not match any of the regexes: '^phy@[0-2]$', '^pinctrl-[0-9]+$'
phy@120000 (marvell,comphy-cp110): phy@2: 'connector' does not match any of the regexes: '^pinctrl-[0-9]+$'
Fixes: 50355ac70d ("dt-bindings: phy: Convert marvell,comphy-cp110 to DT schema")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250806200138.1366189-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
Cc: stable@vger.kernel.org
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/ce70b98a201ce82b9df9aa80ac7a5eeaa2268e52.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This reverts commit 10af0273a3.
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Cc: stable@vger.kernel.org
Fixes: 10af0273a3 ("gpio: mlxbf3: only get IRQ for device instance 0")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit d33bd88ac0 ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0 ("ACPI: processor: perflib: Fix initial _PPC limit application")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki
Add documentation about generic driver infrastructure, representing a
guideline on how the generic driver infrastructure is intended to be
used to implement bus specific driver APIs.
This covers aspects such as the bus specific driver trait, adapter
implementation, driver registration and custom device ID types.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250722150110.23565-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The documentation for the generic Device type is outdated and deserves
much more detail.
Hence, expand the documentation and cover topics such as device types,
device contexts, as well as information on how to use the generic device
infrastructure to implement bus and class specific device types.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250722150110.23565-3-dakr@kernel.org
[ Add empty line after code blocks, "in" -> "within", remove unnecessary
pin annotations in class device example. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
