Commit graph

1,385,869 commits

Author SHA1 Message Date
Linus Torvalds
1222390d13 gpio fixes for v6.14-rc6
- protect gpio-aggregator against module unload
 - use raw spinlock in gpio-rcar to fix a lockdep splat
 - fix OF node leak in gpio-rcar
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmfK5pEACgkQEacuoBRx
 13K2nRAA06GCuPEvSZX+cIMSI5ZQd7XwhfR6YXBS0j6PaLItUjLWENLBy+2SxpKa
 o8twuaHWnQGbRcSbGkJjF7vQ6cn6kxJsIIdJ6r2ghnEzILuxv8xcVMrfO4ulwaoZ
 hvv/cJfS1GqIzaxrGRmyWB0Kv3+hAd4juLkaPeMgxkxGTjq2iyh5oQk/1ok0Qew2
 GsoHhZ3r0AqE5JTqhnHRxtQEP2ZsBN/p1CY4WHWuvbyu6AQz4/ld5WUiCrOtADJL
 ot/s7lgPOprlbNDcwgWYc/rr2MRw1s6pdvEabi16G3CZuxS6zJnPrHegoFKcU7XO
 8Q2GxLpYya76obtcSsxRXGFZxyxPaMO47dbknyGCBH0T8VfA393i96XhoiRorvMf
 qtd8IxmWeeH8bRp3aqkKuxH7qaFTbzxLWlTAuM1Yv9cNFMnbEe6pv26i0TVzcyJD
 547CCA+FP2RH63wm0yhq1UFMp4VbDHxvQBkrO5liVCmhxX6bOVDqZS5dNuN7x10J
 1xxBNzbFujyE/TVKF/SFGcXhcrcHxazaFnEbUA14fLJ7ktP87rhQcla66l9pXwjG
 qZS876oci8y1fkJ/f3JMFf5vgUrdt+QpECPfmUaL/ZCNHvE0YThsX88GYPPP3Xdg
 Pds43hU99kHmKP9RicmuuEnwoAm9JjLkVln6zRTxPvGDNBePFKk=
 =MgMW
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - protect gpio-aggregator against module unload

 - use raw spinlock in gpio-rcar to fix a lockdep splat

 - fix OF node leak in gpio-rcar

* tag 'gpio-fixes-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: rcar: Fix missing of_node_put() call
  gpio: rcar: Use raw_spinlock to protect register access
  gpio: aggregator: protect driver attr handlers against module unload
2025-03-07 07:49:23 -10:00
Luiz Augusto von Dentz
0bdd889715 Bluetooth: hci_event: Fix enabling passive scanning
Passive scanning shall only be enabled when disconnecting LE links,
otherwise it may start result in triggering scanning when e.g. an ISO
link disconnects:

> HCI Event: LE Meta Event (0x3e) plen 29
      LE Connected Isochronous Stream Established (0x19)
        Status: Success (0x00)
        Connection Handle: 257
        CIG Synchronization Delay: 0 us (0x000000)
        CIS Synchronization Delay: 0 us (0x000000)
        Central to Peripheral Latency: 10000 us (0x002710)
        Peripheral to Central Latency: 10000 us (0x002710)
        Central to Peripheral PHY: LE 2M (0x02)
        Peripheral to Central PHY: LE 2M (0x02)
        Number of Subevents: 1
        Central to Peripheral Burst Number: 1
        Peripheral to Central Burst Number: 1
        Central to Peripheral Flush Timeout: 2
        Peripheral to Central Flush Timeout: 2
        Central to Peripheral MTU: 320
        Peripheral to Central MTU: 160
        ISO Interval: 10.00 msec (0x0008)
...
> HCI Event: Disconnect Complete (0x05) plen 4
        Status: Success (0x00)
        Handle: 257
        Reason: Remote User Terminated Connection (0x13)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
        Extended scan: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
        Duration: 0 msec (0x0000)
        Period: 0.00 sec (0x0000)

Fixes: 9fcb18ef3a ("Bluetooth: Introduce LE auto connect options")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-07 12:43:30 -05:00
Pauli Virtanen
8d74c9106b Bluetooth: SCO: fix sco_conn refcounting on sco_conn_ready
sco_conn refcount shall not be incremented a second time if the sk
already owns the refcount, so hold only when adding new chan.

Add sco_conn_hold() for clarity, as refcnt is never zero here due to the
sco_conn_add().

Fixes SCO socket shutdown not actually closing the SCO connection.

Fixes: ed95885549 ("Bluetooth: SCO: remove the redundant sco_conn_put")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-07 12:43:29 -05:00
Hsin-chen Chuang
75ddcd5ad4 Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL
Automatically configure the altsetting for HCI_USER_CHANNEL when a SCO
is connected.

The motivation is to enable the HCI_USER_CHANNEL user to send out SCO
data through USB Bluetooth chips, which is mainly used for bidirectional
audio transfer (voice call). This was not capable because:

- Per Bluetooth Core Spec v5, Vol 4, Part B, 2.1, the corresponding
  alternate setting should be set based on the air mode in order to
  transfer SCO data, but
- The Linux Bluetooth HCI_USER_CHANNEL exposes the Bluetooth Host
  Controller Interface to the user space, which is something above the
  USB layer. The user space is not able to configure the USB alt while
  keeping the channel open.

This patch intercepts the HCI_EV_SYNC_CONN_COMPLETE packets in btusb,
extracts the air mode, and configures the alt setting in btusb.

This patch is tested on ChromeOS devices. The USB Bluetooth models
(CVSD, TRANS alt3 and alt6) could work without a customized kernel.

Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-07 12:43:27 -05:00
Diogo Ivo
65d691a440 arm64: tegra: p2180: Add TMP451 temperature sensor node
The Jetson TX1 module contains a TI TMP451 temperature sensor.
Add a DT node for it.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-4-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-07 18:38:29 +01:00
Diogo Ivo
918109dd46 arm64: tegra: p2597: Enable TCA9539 as IRQ controllers
Fill out the DT nodes enabling both TCA9539 chips as IRQ controllers.

Proper functionality was tested for both instances.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-3-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-07 18:38:29 +01:00
Diogo Ivo
d6823147b0 arm64: tegra: Define pinmuxing for gpio pads on Tegra210
As the gpio pads are capable of operating at either 1.8V or 3.3V add
both options to the pinmuxing so that the appropriate level can be set
depending on the voltage of the regulator driving the pads.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-2-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-07 18:38:29 +01:00
Diogo Ivo
f34621f31e arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-1-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-07 18:38:28 +01:00
Jon Hunter
6d4bfe6d86 arm64: tegra: Resize aperture for the IGX PCIe C5 slot
Some discrete graphics cards such as the NVIDIA RTX A6000 support
resizable BARs. When connecting an A6000 card to the NVIDIA IGX Orin
platform, resizing the BAR1 aperture to 8GB fails because the current
device-tree configuration for the PCIe C5 slot cannot support this.
Fix this by updating the device-tree 'reg' and 'ranges' properties for
the PCIe C5 slot to support this.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250116151903.476047-1-jonathanh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-07 18:38:28 +01:00
Ninad Malwade
bb8a3ad25f arm64: tegra: Remove the Orin NX/Nano suspend key
As per the Orin Nano Dev Kit schematic, GPIO_G.02 is not available
on this device family. It should not be used at all on Orin NX/Nano.
Having this unused pin mapped as the suspend key can lead to
unpredictable behavior for low power modes.

Orin NX/Nano uses GPIO_EE.04 as both a "power" button and a "suspend"
button. However, we cannot have two gpio-keys mapped to the same
GPIO. Therefore remove the "suspend" key.

Cc: stable@vger.kernel.org
Fixes: e63472eda5 ("arm64: tegra: Support Jetson Orin NX reference platform")
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Link: https://lore.kernel.org/r/20250206224034.3691397-1-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-03-07 18:38:28 +01:00
Jiapeng Chong
5ba8f4a39e function_graph: Remove the unused variable func
Variable func is not effectively used, so delete it.

kernel/trace/trace_functions_graph.c:925:16: warning: variable ‘func’ set but not used.

This happened because the variable "func" which came from "call->func" was
replaced by "ret_func" coming from "graph_ret->func" but "func" wasn't
removed after the replacement.

Link: https://lore.kernel.org/20250307021412.119107-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=19250
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-03-07 12:34:07 -05:00
Linus Torvalds
8aed61b833 platform-drivers-x86 for v6.14-4
Fixes and new HW support:
 
  - amd/pmf:
 
      - Initialize 'cb_mutex'
 
      - Support for new version of PMF-TA
 
  - intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
 
  - intel/vsec: Add Diamond Rapids support
 
  - thinkpad_acpi: Add battery quirk for ThinkPad X131e
 The following is an automated shortlog grouped by driver:
 
 amd/pmf:
  -  Initialize and clean up `cb_mutex`
  -  Propagate PMF-TA return codes
  -  Update PMF Driver for Compatibility with new PMF-TA
 
 intel-hid:
  -  fix volume buttons on Microsoft Surface Go 4 tablet
 
 intel/vsec:
  -  Add Diamond Rapids support
 
 thinkpad_acpi:
  -  Add battery quirk for ThinkPad X131e
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ8rDZAAKCRBZrE9hU+XO
 McQhAQDw1Vf8jKrdK3X80DNSuIToO5B4dpX+PB8r4xgK96ipqgD9GKxHW1tbGqHH
 vUTEqwcpDwBMe+wDRbD31SBaZUSgXwo=
 =wZNA
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

 - amd/pmf:
     - Initialize 'cb_mutex'
     - Support for new version of PMF-TA

 - intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet

 - intel/vsec: Add Diamond Rapids support

 - thinkpad_acpi: Add battery quirk for ThinkPad X131e

* tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA
  platform/x86/amd/pmf: Propagate PMF-TA return codes
  platform/x86/intel/vsec: Add Diamond Rapids support
  platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
  platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
  platform/x86/amd/pmf: Initialize and clean up `cb_mutex`
2025-03-07 07:29:13 -10:00
Ilpo Järvinen
e4cb29386f PCI: Do not claim to release resource falsely
pci_release_resource() will print "... releasing" regardless of the
resource being assigned or not. Move the print after the res->parent check
to avoid claiming the kernel would be releasing an unassigned resource.

Likely, none of the current callers pass a resource that is unassigned so
this change is mostly to correct the non-sensical order than to remove
errorneous printouts.

Link: https://lore.kernel.org/r/20250307140922.5776-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-03-07 11:26:19 -06:00
Linus Torvalds
2a405b36a6 sound fixes for 6.14-rc6
There is a single change in ALSA core (for sequencer code for the
 module auto-loading in a wrong timing) while the all rest are various
 HD- and USB-audio fixes.  Many of them are boring device-specific
 quirks, and should be safe to take.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmfKrWoOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE8ENA//eisslsBfG3XUxsSnPIEwCxKjDPH7l9CMRTx+
 ff35fNTK4LNeueaK8aHrT3FZlc7xtNj5rx3AjvgvUG1AZgwRojjK+CYLx9gT8iXq
 peZs5A+/HdrG7UlRkNwBNHYI4fZbpbNmW6MUcx8M6ILlTmzFyr/u3g8UZUkAJj/x
 HICGGm7sZQBePjSJah25sDO8jyN9ANVfh/XcP20y63CLwIK0i7KwdQqmakYzW4zL
 OojV7/O8gaCmPCrPjc/r4KG/XpaE33c0ixPqnegd3Zae0ehGyRmwKODSLRUXIU2U
 BtcA1cAUR4SMjXBxVqNY0+h9JkP4AFVMc1DbVRyGouhVJMoQQmAeYo4RDAF+gJNA
 GGag0L4XdubndCgjAChqZ0wsPZFumBH4ZaezWKZL8UoF9QbCPhsIOh1PIXf5fj8x
 NDHgc1x0GUPmFO7hR86bJ87ddILwBlG5xQLTWEFcTH4MZvUTbQelsHQo7yTb/HbZ
 T34hSupXscts0tHuWNGd+x71TLFmj8F007kAk8EGniZPYFxycJZtzaIlCrjAGto6
 sjvHqnY5Sach6lIJMFzjMdkzAVIuggwo8Ja17knxXH449TLhN64OysvRO0yViH1J
 uHBcal7t5rC2LMCtO0CZ6+otl92zCWH98GgBsvjErtGsusc0nqE/FwPrEANlSqO2
 U2i8yw0=
 =0M0k
 -----END PGP SIGNATURE-----

Merge tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "There is a single change in ALSA core (for sequencer code for the
  module auto-loading in a wrong timing) while the all rest are various
  HD- and USB-audio fixes.

  Many of them are boring device-specific quirks, and should be safe to
  take"

* tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Add support for ASUS Zenbook UM3406KA Laptops using CS35L41 HDA
  ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA
  ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA
  ALSA: hda/realtek: Add support for various ASUS Laptops using CS35L41 HDA
  ALSA: hda/realtek: Add support for ASUS ROG Strix G614 Laptops using CS35L41 HDA
  ALSA: hda/realtek: Add support for ASUS ROG Strix GA603 Laptops using CS35L41 HDA
  ALSA: hda/realtek: Add support for ASUS ROG Strix G814 Laptop using CS35L41 HDA
  ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
  ALSA: hda/realtek: update ALC222 depop optimize
  ALSA: hda: realtek: fix incorrect IS_REACHABLE() usage
  ALSA: usx2y: validate nrpacks module parameter on probe
  ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform
  ALSA: seq: Avoid module auto-load handling at event delivery
  ALSA: hda: Fix speakers on ASUS EXPERTBOOK P5405CSA 1.0
  ALSA: hda/realtek: Fix Asus Z13 2025 audio
  ALSA: hda/realtek: Remove (revert) duplicate Ally X config
2025-03-07 07:24:41 -10:00
Zhiyuan Dai
5af473941b PCI: Increase Resizable BAR support from 512 GB to 128 TB
Per PCIe r6.0, sec 7.8.6.2, devices can advertise Resizable BAR sizes up to
128 TB in the Resizable BAR Capability register.  Larger sizes can be
advertised via the Capability register, but that requires an API change.

Update pci_rebar_get_possible_sizes() and pbus_size_mem() to increase the
sizes we currently support from 512 GB to 128 TB.

Link: https://lore.kernel.org/r/20250307053535.44918-1-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-03-07 11:23:34 -06:00
Alice Ryhl
74fc34937d rust: miscdevice: change how f_ops vtable is constructed
I was helping someone with writing a new Rust abstraction, and we were
using the miscdevice abstraction as an example. While doing this, it
became clear to me that the way I implemented the f_ops vtable is
confusing to new Rust users, and that the approach used by the block
abstractions is less confusing.

Thus, update the miscdevice abstractions to use the same approach as
rust/kernel/block/mq/operations.rs.

Sorry about the large diff. This changes the indentation of a large
amount of code.

Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250227-miscdevice-fops-change-v1-1-c9e9b75d67eb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07 18:20:36 +01:00
Paul Moore
b51543e9fb MAINTAINERS: add an explicit credentials entry
The lack of an explicit credential (kernel/cred.c) entry has caused
confusion in the past among new, and not-so-new developers, about where
to send credential patches for discussion and merging.  Those patches
that are sent can often rot on the mailing lists for months as there
is no clear maintainer tasked with reviewing and merging patches.

I'm volunteering for the cred maintainer role to try and reduce the
confusion and help cred patches find their way up to Linus' tree.  As
there generally aren't a lot of cred patches I'll start with simply
folding them into the LSM tree, but if this changes I'll setup a
dedicated cred tree.

Link: https://lore.kernel.org/all/20250304222304.214704-2-paul@paul-moore.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
2025-03-07 12:13:51 -05:00
Ville Syrjälä
bb800b56f0 drm/i915: Relocate intel_bw_crtc_update()
intel_bw_crtc_update() is only used by the readout path, so relocate
the function next its only caller. Easier to read the code when related
things are nearby.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-19-ville.syrjala@linux.intel.com
2025-03-07 19:11:41 +02:00
Ville Syrjälä
e6001c930a drm/i915: Move dbuf_state->active_pipes into skl_wm_get_hw_state()
Move the dbuf_state readout parts into skl_wm_get_hw_state()
so that the details are better hidden from sight.

This will stop updating this on pre-skl, but that's what we want
since the dbuf state is only used on skl+.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-18-ville.syrjala@linux.intel.com
2025-03-07 19:11:35 +02:00
Ville Syrjälä
14968c207a drm/i915: Do wm readout ealier for skl+
Move the wm readout to happen earlier. This is needed because
the bw_state readout will need ddb information populated by
the wm readout.

For now limit this to skl+ as I've not really analyzed the
implications of doing this on other platforms.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-17-ville.syrjala@linux.intel.com
2025-03-07 19:02:58 +02:00
Ville Syrjälä
dbf1b1ed55 drm/i915: Split wm sanitize from readout
I'll need to move the wm readout to an earlier point in the
sequence (since the bw state readout will need ddb information
from the wm readout). But (at least for now) the wm sanitation
will need to stay put as it needs to also sanitize things for
any pipes/planes we disable later during the hw state takeover.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-16-ville.syrjala@linux.intel.com
2025-03-07 19:02:55 +02:00
Ville Syrjälä
003ec4ce42 drm/i915: Simplify cdclk_disable_noatomic()
Instead of hand rolling the cdclk state disabling for a
pipe in noatomic() let's just recompute the whole thing
from scratch. Less code we have to remember to keep in sync.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-15-ville.syrjala@linux.intel.com
2025-03-07 19:02:52 +02:00
Ville Syrjälä
e45b8192c7 sem/i915: Simplify intel_cdclk_update_hw_state()
intel_crtc_calculate_min_cdclk() can't return an error
(since commit 5ac860cc52 ("drm/i915: Fix DBUF bandwidth vs.
cdclk handling")) so there is no point in checking for one.

Also we can just call it unconditionally since it itself
checks crtc_state->hw.enabled. We are currently checking
crtc_state->hw.active in the readout path, but active==enabled
during readout, and arguably enabled is the more correct thing
to check anyway.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-14-ville.syrjala@linux.intel.com
2025-03-07 19:02:49 +02:00
Ville Syrjälä
ff79a131d3 drm/i915: Skip some bw_state readout on pre-icl
We only compute bw_state->data_rate and bw_state->num_active_planes
on icl+. Do the same during readout so that we don't leave random
junk inside the state.

v2: Skip the whole intel_bw_crtc_update() (Vinod)

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-13-ville.syrjala@linux.intel.com
2025-03-07 19:02:46 +02:00
Ville Syrjälä
7b65b24a4e drm/i915: Update bw_state->active_pipes during readout
Update bw_state->active_pipes during readout.

This was completely missing from the current readout code.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-12-ville.syrjala@linux.intel.com
2025-03-07 19:02:44 +02:00
Ville Syrjälä
ad2d834f88 drm/i915: Extract intel_bw_update_hw_state()
Hoist the bw stuff into a separate function from
intel_modeset_readout_hw_state() so that the details
are better hidden inside intel_bw.c.

We can also skip the whole thing on pre-skl since the dbuf state
isn't actually used on those platforms.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-11-ville.syrjala@linux.intel.com
2025-03-07 19:02:41 +02:00
Ville Syrjälä
bd17fc4b6b drm/i915: Extract intel_cdclk_update_hw_state()
Hoist the cdclk stuff into a separate function from
intel_modeset_readout_hw_state() so that the details
are better hidden inside intel_cdclk.c.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-10-ville.syrjala@linux.intel.com
2025-03-07 19:02:37 +02:00
Ville Syrjälä
1ec9686095 drm/i915: Extract intel_bw_crtc_disable_noatomic()
Hoist the bw stuff into a separate function from
intel_crtc_disable_noatomic_complete() so that the details
are better hidden inside intel_bw.c.

We can also skip the whole thing on pre-skl since the dbuf state
isn't actually used on those platforms.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-9-ville.syrjala@linux.intel.com
2025-03-07 19:02:35 +02:00
Ville Syrjälä
d34b59d5ba drm/i915: Add skl_wm_plane_disable_noatomic()
Add skl_wm_plane_disable_noatomic() which will clear out all
the ddb and wm state for the plane. And let's do this _before_
we call plane->disable_arm() so that it'll actually clear out
the state in the hardware as well.

Currently this won't do anything new for most of the
intel_plane_disable_noatomic() calls since those are done before
wm readout, and thus everything wm/ddb related in the state
will still be zeroed anyway. The only difference will be for
skl_dbuf_sanitize() is happens after wm readout. But I'll be
reordering thigns so that wm readout happens earlier and at that
point this will guarantee that we still clear out the old
wm/ddb junk from the state.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-8-ville.syrjala@linux.intel.com
2025-03-07 19:02:32 +02:00
Ville Syrjälä
1dc6076c67 drm/i915: clean up pipe's ddb usage in intel_crtc_disable_noatomic()
Update the ddb tracking information when we disable a pipe
during sanitization. Avoids leaving stale junk in the states.

Currently this doesn't do anything as we haven't read out this
state yet when we do the sanitization, but that will change soon.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-7-ville.syrjala@linux.intel.com
2025-03-07 19:02:30 +02:00
Ville Syrjälä
d66fbd662d drm/i915: Extract skl_wm_crtc_disable_noatomic()
Hoist the dbuf stuff into a separate function from
intel_crtc_disable_noatomic_complete() so that the details
are better hidden inside skl_watermark.c.

We can also skip the whole thing on pre-skl since the dbuf state
isn't actually used on those platforms. The readout path does
still fill dbuf_state->active_pipes but we'll remedy that later.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-6-ville.syrjala@linux.intel.com
2025-03-07 19:02:27 +02:00
Ville Syrjälä
082ed1ffc2 drm/i915: Extract intel_cdclk_crtc_disable_noatomic()
Hoist the cdclk stuff into a separate function from
intel_crtc_disable_noatomic_complete() so that the details
are better hidden inside intel_cdclk.c.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-5-ville.syrjala@linux.intel.com
2025-03-07 19:02:24 +02:00
Ville Syrjälä
cd5693cf5e drm/i915: Use intel_plane_set_invisible() in intel_plane_disable_noatomic()
Reuse intel_plane_set_invisible() in intel_plane_disable_noatomic()
instead of hand rolling the same stuff.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-4-ville.syrjala@linux.intel.com
2025-03-07 19:02:21 +02:00
Ville Syrjälä
0851227d62 drm/i915: Don't clobber crtc_state->cpu_transcoder for inactive crtcs
Inactive crtcs are supposed to have their crtc_state completely
cleared. Currently we are clobbering crtc_state->cpu_transcoder
before determining whether it's actually enabled or not. Don't
do that.

I want to rework the inherited flag handling for inactive crtcs
a bit, and having a bogus cpu_transcoder in the crtc state can
then cause confusing fastset mismatches even when the crtc never
changes state during the commit.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-3-ville.syrjala@linux.intel.com
2025-03-07 19:02:18 +02:00
Ville Syrjälä
72eea9175e drm/i915: Drop redundant shared_dpll=NULL assignments
The crtc state is expected to be fully cleared before readout,
so there is no need to clear the shared_dpll pointers by hand.

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-2-ville.syrjala@linux.intel.com
2025-03-07 19:02:13 +02:00
Ville Syrjälä
68b97b12c4 drm/i915: Program CURSOR_PROGRAM and COEFF_POLARITY for icl+ combo PHYs
Bspec asks us to clear the CURSOR_PROGRAM and COEFF_POLARITY
bits in PORT_TX_DW5 on icl+ combo PHYs. Make it so.

Bspec: 21257, 49291
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303123952.5669-2-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
2025-03-07 19:01:26 +02:00
Alexandre Torgue
96bf4b89a6 clocksource/drivers/stm32-lptimer: Use wakeup capable instead of init wakeup
"wakeup-source" property describes a device which has wakeup capability
but should not force this device as a wakeup source.

Fixes: 48b41c5e2d ("clocksource: Add Low Power STM32 timers driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Rule: add
Link: https://lore.kernel.org/stable/20250306083407.2374894-1-fabrice.gasnier%40foss.st.com
Link: https://lore.kernel.org/r/20250306102501.2980153-1-fabrice.gasnier@foss.st.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2025-03-07 17:55:59 +01:00
Anindya Sundar Gayen
7e1e4e6265 clocksource/drivers/exynos_mct: Fixed a spelling error
Fixed a spelling issue in driver /s/processer/processor/

Signed-off-by: Anindya Sundar Gayen <anindya.sg@samsung.com>
Link: https://lore.kernel.org/r/20250228131138.9208-1-anindya.sg@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2025-03-07 17:55:59 +01:00
Fabrice Gasnier
b5a497a797 clocksource/drivers/stm32-lptimer: Add support for suspend / resume
Add support for power management on STM32 LPTIMER clocksource driver:
- Upon clockevents_suspend(), shutdown the LPTIMER, and balance the
clk_prepare_enable() from the probe routine.
- Upon clockevents_resume(), restore the prescaler that may have been lost
during low power mode, and restore the clock.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250224172101.3448398-1-fabrice.gasnier@foss.st.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2025-03-07 17:55:59 +01:00
Ivaylo Ivanov
f7803f7905 dt-bindings: timer: exynos4210-mct: add samsung,exynos2200-mct-peris compatible
Whilst having a new multicore timer that differs from the old designs in
functionality and registers (marked as MCTv2 in vendor kernels),
Exynos2200 also keeps an additional multicore timer connected over PERIS
that reuses the same design as older exynos socs.

Add a compatible for the legacy multicore timer of Exynos2200. Rather
than differentiating it based on the block version, mark it as the
one connected over PERIS.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250215123922.163630-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2025-03-07 17:55:59 +01:00
Igor Belwon
f4646b61b7 dt-bindings: timer: exynos4210-mct: Add samsung,exynos990-mct compatible
Add a dedicated compatible for the MCT of the Exynos 990 SoC.
The design for the timer is reused from previous SoCs.

Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250104-cmu-nodes-v1-1-ae8af253bc25@mentallysanemainliners.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2025-03-07 17:55:59 +01:00
Krzysztof Kozlowski
53b552f1cc dt-bindings: timer: Correct indentation and style in DTS example
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.

No functional changes here, but saves some comments during reviews of
new patches built on existing code.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250107131024.246561-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2025-03-07 17:55:59 +01:00
Krzysztof Kozlowski
814ae20ada ARM: dts: marvell: armada: Align GPIO hog name with bindings
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:

  armada-385-clearfog-gtr-s4.dtb: wifi-disable: $nodename:0: 'wifi-disable' does not match '^.+-hog(-[0-9]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-07 17:48:52 +01:00
Krzysztof Kozlowski
37586f6eef ARM: dts: marvell: kirkwood-openrd: Align GPIO hog name with bindings
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:

  kirkwood-openrd-ultimate.dtb: p28: $nodename:0: 'p28' does not match '^.+-hog(-[0-9]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-07 17:48:30 +01:00
Krzysztof Kozlowski
9e7531c492 arm64: dts: marvell: armada-8040: Align GPIO hog name with bindings
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:

  armada-8040-clearfog-gt-8k.dtb: sata_reset: $nodename:0: 'sata_reset' does not match '^.+-hog(-[0-9]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2025-03-07 17:48:30 +01:00
Miguel Ojeda
cba3b86974 drm/panic: fix overindented list items in documentation
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:

    error: doc list item overindented
       --> drivers/gpu/drm/drm_panic_qr.rs:914:5
        |
    914 | ///    will be encoded as binary segment, otherwise it will be encoded
        |     ^^^ help: try using `  ` (2 spaces)
        |
        = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items

The overindentation is slightly hard to notice, since all the items
start with a backquote that makes it look OK, but it is there.

Thus fix it.

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-2-ojeda@kernel.org
2025-03-07 17:23:23 +01:00
Miguel Ojeda
986c2e9ca8 drm/panic: use div_ceil to clean Clippy warning
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:

    error: manually reimplementing `div_ceil`
       --> drivers/gpu/drm/drm_panic_qr.rs:548:26
        |
    548 |         let pad_offset = (offset + 7) / 8;
        |                          ^^^^^^^^^^^^^^^^ help: consider using `.div_ceil()`: `offset.div_ceil(8)`
        |
        = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_div_ceil

And similarly for `stride`. Thus apply the suggestion to both.

The behavior (and thus codegen) is not exactly equivalent [1][2], since
`div_ceil()` returns the right value for the values that currently
would overflow.

Link: https://github.com/rust-lang/rust-clippy/issues/14333 [1]
Link: https://godbolt.org/z/dPq6nGnv3 [2]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-1-ojeda@kernel.org
2025-03-07 17:22:23 +01:00
Kristina Martšenko
653884f887 arm64: extable: Add fixup handling for uaccess CPY* instructions
A subsequent patch will use CPY* instructions to copy between user and
kernel memory. Add a new exception fixup type to avoid fixing up faults
on kernel memory accesses, in order to make it easier to debug kernel
bugs and to keep the same behavior as with regular loads/stores.

Signed-off-by: Kristina Martšenko <kristina.martsenko@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250228170006.390100-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2025-03-07 16:18:06 +00:00
Ilpo Järvinen
f895f24930
Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next 2025-03-07 18:16:14 +02:00
Rodrigo Vivi
fc858ddf9c
drm/xe/guc_pc: Remove duplicated pc_start call
xe_guc_pc_start() was getting called from both
xe_uc_init_hw() and from xe_guc_start().

But both are called from do_gt_restart() and only
xe_uc_init_hw() is called at initialization.

So, let's remove the duplication in the regular gt_restart
path.

The only place where xe_guc_pc_start() won't get called now
is on the gt_reset failure path. However, if gt_reset has
failed, it is really unlikely that the PC start will work
or is desired.

Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306220643.1014049-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-03-07 11:10:05 -05:00