The signal from the dual digital microphones connected to the DMIC_BE
takes 30ms to settle after being enabled. Add a dmic-codec with
corresponding wakeup-delay-ms to prevent an initial "pop" sound when
recording with the microphones.
Co-developed-by: Zoran Zhan <zoran.zhan@mediatek.com>
Signed-off-by: Zoran Zhan <zoran.zhan@mediatek.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250225-genio700-dmic-v2-8-3076f5b50ef7@collabora.com
[Angelo: Resolved merge conflicts]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add necessary routes for the onboard dual DMIC present on the Genio
700/510 EVK. The dmic is supplied by micbias0 and micbias2, and inputs
into the MT8188 DMIC DAI.
Co-developed-by: parkeryang <Parker.Yang@mediatek.com>
Signed-off-by: parkeryang <Parker.Yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250225-genio700-dmic-v2-6-3076f5b50ef7@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This board can use a MIPI-DSI panel on the DSI0 connector: in
preparation for adding an overlay for the Radxa Display 8HD,
add a pipeline connecting VDOSYS0 components to DSI0.
This pipeline remains disabled by default, as it is expected
to be enabled only by a devicetree overlay that declares the
actual DSI panel node, completing the graph.
Link: https://lore.kernel.org/r/20250213112008.56394-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The base SoC devicetree now defines a display controller graph:
connect the board specific outputs (eDP internal display, DP
external display) to fully migrate Cherry and make it finally
possible to make Chromebooks and other board types to coexist
without per-board driver modifications.
Link: https://lore.kernel.org/r/20250213112008.56394-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The display related IPs in MT8195 are flexible and support being
interconnected with different instances of DDP IPs and/or with
different DDP IPs, forming a full Display Data Path that ends
with an actual display output, which is board specific.
Add a common graph in the main mt8195.dtsi devicetree, which is
shared between all of the currently supported boards.
All boards featuring any display functionality will extend this
common graph to hook the display controller of the SoC to their
specific output port(s).
Link: https://lore.kernel.org/r/20250213112008.56394-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix the following warning for clock-controller node:
DTC [C] arch/arm64/boot/dts/airoha/en7581-evb.dtb
arch/arm64/boot/dts/airoha/en7581.dtsi:176.37-181.5: Warning (simple_bus_reg): /soc/clock-controller@1fa20000: simple-bus unit address format error, expected "1fb00000"
Fixes: 7693017580 ("arm64: dts: airoha: en7581: Add Clock Controller node")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250221-en7581-dts-spi-pinctrl-v3-2-4719e2d01555@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Introduce the following nodes to EN7581 SoC and EN7581 evaluation board:
- rng controller
- pinctrl
- i2c controllers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250221-en7581-dts-spi-pinctrl-v3-1-4719e2d01555@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a pinctrl configuration for the Touchscreen IC's power line
to make sure that the pin is configured as GPIO and to stop
relying on correct pin configuration from bootloader.
Link: https://lore.kernel.org/r/20250220110948.45596-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The base SoC devicetree now defines a display controller graph:
connect the board specific outputs (eDP internal display, DP
external display) to fully migrate Cherry and make it finally
possible to make Chromebooks and other board types to coexist
without per-board driver modifications.
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # On MT8188 Ciri (int. and ext.)
Link: https://lore.kernel.org/r/20250220110948.45596-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add PCIe Root Port controller support for the Agilex family of chips.
The Agilex PCIe Hard IP has three variants that are mostly software
compatible, except for a couple register offsets. The P-Tile variant
supports Gen3/Gen4 1x16. The F-Tile variant supports Gen3/Gen4 4x4,
4x8, and 4x16. The R-Tile variant improves on the F-Tile variant by
adding Gen5 support.
To simplify the implementation of pci_ops read/write functions,
ep_{read/write}_cfg() callbacks were added to struct altera_pci_ops
to easily distinguish between hardware variants.
Signed-off-by: D M, Sharath Kumar <sharath.kumar.d.m@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221170452.875419-3-matthew.gerlach@linux.intel.com
[kwilczynski: tidy code comments]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
This patch follows commit 92191dd107 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable Rockchip UFS host driver.
This driver is first introduced on Rockchip RK3576 SoC, and will
be used for more SoCs in near future, so add it to defconfig
will make these platforms work better.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1741161252-138526-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: c8755b29b5 ("mctp i3c: MCTP I3C driver")
Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-7-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-6-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-5-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-4-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The combination of dev_err() and the returned error code could be
replaced by dev_err_probe() in driver's probe function.
Thus, convert the code to use dev_err_probe() to make code simpler.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240831040413.126417-3-zhangzekun11@huawei.com
[kwilczynski: commit log, return -ETIMEDOUT from hi3660_pcie_phy_start()
rather than -EINVAL for when the PIPE clock fails to become stable,
drop redundant dev->of_node NULL check]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
By default fair_server dl_server allocates 5% of the bandwidth to the root
domain. Due to this writing any value less than 5% fails due to -EBUSY:
$ cat /proc/sys/kernel/sched_rt_period_us
1000000
$ echo 49999 > /proc/sys/kernel/sched_rt_runtime_us
-bash: echo: write error: Device or resource busy
$ echo 50000 > /proc/sys/kernel/sched_rt_runtime_us
$
Since the sched_rt_runtime_us allows -1 as the minimum, put this
restriction in the documentation.
One should check average of runtime/period in
/sys/kernel/debug/sched/fair_server/cpuX/* for exact value.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-3-sshegde@linux.ibm.com
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add PCI_VENDOR_ID_ROCKCHIP to the list of RAS DES vendor specific IDs.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250225145657.944925-2-cassel@kernel.org
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Move PCI_VENDOR_ID_ROCKCHIP from pci_endpoint_test.c to pci_ids.h and
reuse it in pcie-rockchip-host.c.
Link: https://lore.kernel.org/r/20250218092120.2322784-2-cassel@kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add the debugfs property to provide a view of the current link's LTSSM
status from the Root Port device.
Signed-off-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250223141848.231232-1-18255117159@163.com
[kwilczynski: commit log, refactor dw_ltssm_sts_string() to avoid
compilation errors on platforms that do not set CONFIG_PCIE_DW_HOST]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support to provide Statistical Counter interface to userspace.
This set of debug registers are part of the RAS DES feature present in
DesignWare PCIe controllers.
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-6-shradha.t@samsung.com
[kwilczynski: commit log, tidy up code comments, update documentation,
squashed patch that checks if the event counter is supported from
https://lore.kernel.org/linux-pci/20250225171239.19574-3-manivannan.sadhasivam@linaro.org]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support to provide Error Injection interface to userspace.
This set of debug registers are part of the RAS DES feature present in
DesignWare PCIe controllers.
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-5-shradha.t@samsung.com
[kwilczynski: commit log, tidy up code comments, update documentation,
change debugfs property name from "duplicate_dllp" to "duplicate_tlp"]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support to provide Silicon Debug interface to userspace.
This set of debug registers are part of the RAS DES feature present in
DesignWare PCIe controllers.
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-4-shradha.t@samsung.com
[kwilczynski: commit log, tidy up Kconfig and drop "default y", tidy up
code comments, squashed patch that fixes a NULL pointer dereference when
debugfs is already unavailable during clean-up from
https://lore.kernel.org/linux-pci/20250225171239.19574-2-manivannan.sadhasivam@linaro.org,
refactor dwc_pcie_debugfs_init() to not return errors, squashed patch that
changes how lack of the RAS DES capability is handled from
https://lore.kernel.org/linux-pci/20250304151814.6xu7cbpwpqrvcad5@thinkpad]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The on_freelist() doesn't have a way to handle the edgecase of having a
full freelist that doesn't end in NULL and instead has another valid
pointer in the slab as a result of a Use-After-Free or anything similar.
This case won't get caught by check_valid_pointer() and it will result in
nr incrementing to `slab->objects + 1`, corrupting the slab->inuse entry
later in the code by setting it to -1.
Add an if check to detect that case, report it and handle the freelist
and slab appropriately, as is the standard process in these situations.
Furthermore change the return type of the function from int to bool as
per coding style guidelines.
Also move the `break;` line inside the `if (object) {` to make it more
obvious that the code breaks the while loop in that branch.
Signed-off-by: Lilith Persefoni Gkini <lilithgkini@proton.me>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Matthew Wilcox (Oracle) <willy@infradead.org> says:
The start of this was the removal of orangefs_writepage(), but it quickly
spiralled into a more comprehensive cleanup. The first patch is an
actual bug fix. I haven't tagged it for backport, as I don't think we
really care about 32-bit systems any more, but feel free to add a cc to
stable if you disagree.
Patches 2 and 3 are compilation fixes for warnings which aren't enabled
by default.
Patches 4-9 are improvements which simplify orangefs or convert it
from pages to folios. There is still a little use of 'struct page'
in orangefs, but it's not in the areas that deal with the page cache.
* patches from https://lore.kernel.org/r/20250305204734.1475264-1-willy@infradead.org:
orangefs: Convert orangefs_writepages to contain an array of folios
orangefs: Simplify bvec setup in orangefs_writepages_work()
orangefs: Unify error & success paths in orangefs_writepages_work()
orangefs: Pass mapping to orangefs_writepages_work()
orangefs: Convert orangefs_writepage_locked() to take a folio
orangefs: Remove orangefs_writepage()
orangefs: make open_for_read and open_for_write boolean
orangefs: Move s_kmod_keyword_mask_map to orangefs-debugfs.c
orangefs: Do not truncate file size
Link: https://lore.kernel.org/r/20250305204734.1475264-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The pages being passed in are always folios (since they come from the
page cache). This eliminates several hidden calls to compound_head(),
and uses of legacy APIs.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-10-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This produces a bvec which is slightly different as the last page is added
in its entirety rather than only the portion which is being written back.
However we don't use this information anywhere; the iovec has its own
length parameter.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-9-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Both arms of this conditional now have the same loop, so sink it out
of the conditional.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-8-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove two accesses to page->mapping by passing the mapping from
orangefs_writepages() to orangefs_writepages_callback() and then
orangefs_writepages_work(). That makes it obvious that all folios come
from the same mapping, so we can hoist the call to mapping_set_error()
outside the loop. While I'm here, switch from write_cache_pages()
to writeback_iter() which removes an indirect function call.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-7-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Both callers have a folio, pass it in and use it inside
orangefs_writepage_locked(). Removes a few hidden calls to
compound_head() and accesses to page->mapping.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-6-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If we add a migrate_folio operation, we can remove orangefs_writepage
(as there is already a writepages operation). filemap_migrate_folio()
will do fine as struct orangefs_write_range does not need to be adjusted
when the folio is migrated.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-5-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
sparse currently warns:
fs/orangefs/file.c:119:32: warning: incorrect type in assignment (different base types)
fs/orangefs/file.c:119:32: expected int open_for_write
fs/orangefs/file.c:119:32: got restricted fmode_t
Turning open_for_write and open_for_read into booleans (which is how
they're used) removes this warning.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-4-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Attempting to build orangefs with W=1 currently reports errors like:
In file included from ../fs/orangefs/protocol.h:287,
from ../fs/orangefs/waitqueue.c:16:
../fs/orangefs/orangefs-debug.h:86:18: error: ‘num_kmod_keyword_mask_map’ defined but not used [-Werror=unused-const-variable=]
Move num_kmod_keyword_mask_map, s_kmod_keyword_mask_map and
struct __keyword_mask_s to orangefs-debugfs.c which is the only file
they're used in.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-3-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
'len' is used to store the result of i_size_read(), so making 'len'
a size_t results in truncation to 4GiB on 32-bit systems.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250305204734.1475264-2-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
pvrdma_modify_device() was added in 2016 as part of
commit 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
but accidentally it was never wired into the device_ops struct.
After some discussion the best course seems to be just to remove it,
see discussion at:
https://lore.kernel.org/all/Z8TWF6coBUF3l_jk@gallifrey/
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250304215637.68559-1-linux@treblig.org
Acked-by: Vishnu Dasa <vishnu.dasa@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In function create_ib_ah() the following line attempts
to left shift the return value of mlx5r_ib_rate() by 4
and store it in the stat_rate_sl member of av:
However the code overlooks the fact that mlx5r_ib_rate()
may return -EINVAL if the rate passed to it is less than
IB_RATE_2_5_GBPS or greater than IB_RATE_800_GBPS.
Because of this, the code may invoke undefined behaviour when
shifting a signed negative value when doing "-EINVAL << 4".
To fix this check for errors before assigning stat_rate_sl and
propagate any error value to the callers.
Fixes: c534ffda78 ("RDMA/mlx5: Fix AH static rate parsing")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250304140246.205919-1-qasdev00@gmail.com
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-11-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-10-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-9-tzimmermann@suse.de
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-8-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-7-tzimmermann@suse.de
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-6-tzimmermann@suse.de