mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-13 07:31:07 +00:00
1,385,869 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Uros Bizjak
|
f8cd9193b6 |
ucount: fix atomic_long_inc_below() argument type
The type of u argument of atomic_long_inc_below() should be long to avoid
unwanted truncation to int.
The patch fixes the wrong argument type of an internal function to
prevent unwanted argument truncation. It fixes an internal locking
primitive; it should not have any direct effect on userspace.
Mark said
: AFAICT there's no problem in practice because atomic_long_inc_below()
: is only used by inc_ucount(), and it looks like the value is
: constrained between 0 and INT_MAX.
:
: In inc_ucount() the limit value is taken from
: user_namespace::ucount_max[], and AFAICT that's only written by
: sysctls, to the table setup by setup_userns_sysctls(), where
: UCOUNT_ENTRY() limits the value between 0 and INT_MAX.
:
: This is certainly a cleanup, but there might be no functional issue in
: practice as above.
Link: https://lkml.kernel.org/r/20250721174610.28361-1-ubizjak@gmail.com
Fixes:
|
||
Alexander Graf
|
07d2490297 |
kexec: enable CMA based contiguous allocation
When booting a new kernel with kexec_file, the kernel picks a target
location that the kernel should live at, then allocates random pages,
checks whether any of those patches magically happens to coincide with a
target address range and if so, uses them for that range.
For every page allocated this way, it then creates a page list that the
relocation code - code that executes while all CPUs are off and we are
just about to jump into the new kernel - copies to their final memory
location. We can not put them there before, because chances are pretty
good that at least some page in the target range is already in use by the
currently running Linux environment. Copying is happening from a single
CPU at RAM rate, which takes around 4-50 ms per 100 MiB.
All of this is inefficient and error prone.
To successfully kexec, we need to quiesce all devices of the outgoing
kernel so they don't scribble over the new kernel's memory. We have seen
cases where that does not happen properly (*cough* GIC *cough*) and hence
the new kernel was corrupted. This started a month long journey to root
cause failing kexecs to eventually see memory corruption, because the new
kernel was corrupted severely enough that it could not emit output to tell
us about the fact that it was corrupted. By allocating memory for the
next kernel from a memory range that is guaranteed scribbling free, we can
boot the next kernel up to a point where it is at least able to detect
corruption and maybe even stop it before it becomes severe. This
increases the chance for successful kexecs.
Since kexec got introduced, Linux has gained the CMA framework which can
perform physically contiguous memory mappings, while keeping that memory
available for movable memory when it is not needed for contiguous
allocations. The default CMA allocator is for DMA allocations.
This patch adds logic to the kexec file loader to attempt to place the
target payload at a location allocated from CMA. If successful, it uses
that memory range directly instead of creating copy instructions during
the hot phase. To ensure that there is a safety net in case anything goes
wrong with the CMA allocation, it also adds a flag for user space to force
disable CMA allocations.
Using CMA allocations has two advantages:
1) Faster by 4-50 ms per 100 MiB. There is no more need to copy in the
hot phase.
2) More robust. Even if by accident some page is still in use for DMA,
the new kernel image will be safe from that access because it resides
in a memory region that is considered allocated in the old kernel and
has a chance to reinitialize that component.
Link: https://lkml.kernel.org/r/20250610085327.51817-1-graf@amazon.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Zhongkun He <hezhongkun.hzk@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Matt Fleming
|
ed4f142f72 |
stackdepot: make max number of pools boot-time configurable
We're hitting the WARN in depot_init_pool() about reaching the stack depot limit because we have long stacks that don't dedup very well. Introduce a new start-up parameter to allow users to set the number of maximum stack depot pools. Link: https://lkml.kernel.org/r/20250718153928.94229-1-matt@readmodwrite.com Signed-off-by: Matt Fleming <mfleming@cloudflare.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Dr. David Alan Gilbert
|
6c6d8f8ba7 |
lib/xxhash: remove unused functions
xxh32_digest() and xxh32_update() were added in 2017 in the original xxhash commit, but have remained unused. Remove them. Link: https://lkml.kernel.org/r/20250716133245.243363-1-linux@treblig.org Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Dave Gilbert <linux@treblig.org> Cc: Nick Terrell <terrelln@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Andrew Morton
|
fefbeed8c6 |
init/Kconfig: restore CONFIG_BROKEN help text
Linus added it in 2003, it later was removed. Put it back. Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Borislav Betkov <bp@alien8.de> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Kairui Song
|
5c241ed8d0 |
mm/shmem, swap: improve cached mTHP handling and fix potential hang
The current swap-in code assumes that, when a swap entry in shmem mapping
is order 0, its cached folios (if present) must be order 0 too, which
turns out not always correct.
The problem is shmem_split_large_entry is called before verifying the
folio will eventually be swapped in, one possible race is:
CPU1 CPU2
shmem_swapin_folio
/* swap in of order > 0 swap entry S1 */
folio = swap_cache_get_folio
/* folio = NULL */
order = xa_get_order
/* order > 0 */
folio = shmem_swap_alloc_folio
/* mTHP alloc failure, folio = NULL */
<... Interrupted ...>
shmem_swapin_folio
/* S1 is swapped in */
shmem_writeout
/* S1 is swapped out, folio cached */
shmem_split_large_entry(..., S1)
/* S1 is split, but the folio covering it has order > 0 now */
Now any following swapin of S1 will hang: `xa_get_order` returns 0, and
folio lookup will return a folio with order > 0. The
`xa_get_order(&mapping->i_pages, index) != folio_order(folio)` will always
return false causing swap-in to return -EEXIST.
And this looks fragile. So fix this up by allowing seeing a larger folio
in swap cache, and check the whole shmem mapping range covered by the
swapin have the right swap value upon inserting the folio. And drop the
redundant tree walks before the insertion.
This will actually improve performance, as it avoids two redundant Xarray
tree walks in the hot path, and the only side effect is that in the
failure path, shmem may redundantly reallocate a few folios causing
temporary slight memory pressure.
And worth noting, it may seems the order and value check before inserting
might help reducing the lock contention, which is not true. The swap
cache layer ensures raced swapin will either see a swap cache folio or
failed to do a swapin (we have SWAP_HAS_CACHE bit even if swap cache is
bypassed), so holding the folio lock and checking the folio flag is
already good enough for avoiding the lock contention. The chance that a
folio passes the swap entry value check but the shmem mapping slot has
changed should be very low.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-2-ryncsn@gmail.com
Fixes:
|
||
Johan Hovold
|
be71ce9796 |
drm/bridge: fix OF node leak
Make sure to drop the OF node reference taken when creating the aux
bridge device when the device is later released.
Fixes:
|
||
Linus Torvalds
|
eacf91b0c7 |
fbdev fixes and cleanups for 6.17-rc1:
Framework fixes:
- fix potential buffer overflow in do_register_framebuffer() [Yongzhen Zhang]
Driver fixes:
- imxfb: prevent null-ptr-deref [Chenyuan Yang]
- nvidiafb: fix build on 32-bit ARCH=um [Johannes Berg]
- nvidiafb: add depends on HAS_IOPORT [Randy Dunlap]
- simplefb: Use of_reserved_mem_region_to_resource() for "memory-region" [Rob Herring]
Cleanups:
- fbcon: various code cleanups wrt blinking [Ville Syrjälä]
- kyrofb: Convert to devm_*() functions [Giovanni Di Santi]
- svgalib: Coding style cleanups [Darshan R.]
- Fix typo in Kconfig text for FB_DEVICE [Daniel Palmer]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaI3GAgAKCRD3ErUQojoP
X7P3AQDP5JP5VAUsdW/sfZiAkO9ye/ouaChc9bfCda482ku5aAEA6g7YPvP/ESVC
v0sEdPPytSjBE/f755OHcuwgoJLBKAk=
=aHRZ
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"One potential buffer overflow fix in the framebuffer registration
function, some fixes for the imxfb, nvidiafb and simplefb drivers, and
a bunch of cleanups for fbcon, kyrofb and svgalib.
Framework fixes:
- fix potential buffer overflow in do_register_framebuffer() [Yongzhen Zhang]
Driver fixes:
- imxfb: prevent null-ptr-deref [Chenyuan Yang]
- nvidiafb: fix build on 32-bit ARCH=um [Johannes Berg]
- nvidiafb: add depends on HAS_IOPORT [Randy Dunlap]
- simplefb: Use of_reserved_mem_region_to_resource() for "memory-region" [Rob Herring]
Cleanups:
- fbcon: various code cleanups wrt blinking [Ville Syrjälä]
- kyrofb: Convert to devm_*() functions [Giovanni Di Santi]
- svgalib: Coding style cleanups [Darshan R.]
- Fix typo in Kconfig text for FB_DEVICE [Daniel Palmer]"
* tag 'fbdev-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use 'bool' where appopriate
fbcon: Introduce get_{fg,bg}_color()
fbcon: fbcon_is_inactive() -> fbcon_is_active()
fbcon: fbcon_cursor_noblink -> fbcon_cursor_blink
fbdev: Fix typo in Kconfig text for FB_DEVICE
fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref
fbdev: svgalib: Clean up coding style
fbdev: kyro: Use devm_ioremap_wc() for screen mem
fbdev: kyro: Use devm_ioremap() for mmio registers
fbdev: kyro: Add missing PCI memory region request
fbdev: simplefb: Use of_reserved_mem_region_to_resource() for "memory-region"
fbdev: fix potential buffer overflow in do_register_framebuffer()
fbdev: nvidiafb: add depends on HAS_IOPORT
fbdev: nvidiafb: fix build on 32-bit ARCH=um
|
||
|
Linus Torvalds
|
7061835997 |
firewire updates for v6.17
This update replaces the remaining tasklet usage in the FireWire subsystem with workqueue for asynchronous packet transmission. With this change, tasklets are now fully eliminated from the subsystem. Asynchronous packet transmission is used for serial bus topology management as well as for the operation of the SBP-2 protocol driver (firewire-sbp2). To ensure reliability during low-memory conditions, the associated workqueue is created with the WQ_MEM_RECLAIM flag, allowing it to participate in memory reclaim paths. Other attributes are aligned with those used for isochronous packet handling, which was migrated to workqueues in v6.12. The workqueues are sleepable and support preemptible work items, making them more suitable for real-time workloads that benefit from timely task preemption at the system level. There remains an issue where 'schedule()' may be called within an RCU read-side critical section, due to a direct replacement of 'tasklet_disable_in_atomic()' with 'disable_work_sync()'. A proposed fix for this has been posted[1], and is currently under review and testing. It is expected to be sent upstream later. [1] https://lore.kernel.org/lkml/20250728015125.17825-1-o-takashi@sakamocchi.jp/ -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaI2aWAAKCRCsLtaWM8Lw EwReAQDcgEHcH/EaPNPKdpInkzh0fH7kRcHZF4f2USsaHkKbSAEA6XvPWrwMAVC7 Ap2w5x/BxoAL+NXz3yJHb3yoxcbKKAI= =NSJY -----END PGP SIGNATURE----- Merge tag 'firewire-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Takashi Sakamoto: "This update replaces the remaining tasklet usage in the FireWire subsystem with workqueue for asynchronous packet transmission. With this change, tasklets are now fully eliminated from the subsystem. Asynchronous packet transmission is used for serial bus topology management as well as for the operation of the SBP-2 protocol driver (firewire-sbp2). To ensure reliability during low-memory conditions, the associated workqueue is created with the WQ_MEM_RECLAIM flag, allowing it to participate in memory reclaim paths. Other attributes are aligned with those used for isochronous packet handling, which was migrated to workqueues in v6.12. The workqueues are sleepable and support preemptible work items, making them more suitable for real-time workloads that benefit from timely task preemption at the system level. There remains an issue where 'schedule()' may be called within an RCU read-side critical section, due to a direct replacement of 'tasklet_disable_in_atomic()' with 'disable_work_sync()'. A proposed fix for this has been posted[1], and is currently under review and testing. It is expected to be sent upstream later" Link: https://lore.kernel.org/lkml/20250728015125.17825-1-o-takashi@sakamocchi.jp/ [1] * tag 'firewire-updates-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: reduce the size of common context structure by extracting members into AT structure firewire: core: minor code refactoring to localize table of gap count firewire: ohci: use workqueue to handle events of AT request/response contexts firewire: ohci: use workqueue to handle events of AR request/response contexts firewire: core: allocate workqueue for AR/AT request/response contexts firewire: core: use from_work() macro to expand parent structure of work_struct firewire: ohci: use from_work() macro to expand parent structure of work_struct firewire: ohci: correct code comments about bus_reset tasklet |
||
Eduard Zingerman
|
1b30d44417 |
bpf: Fix memory leak of bpf_scc_info objects
env->scc_info array contains references to bpf_scc_info objects
allocated lazily in verifier.c:scc_visit_alloc().
env->scc_cnt was supposed to track env->scc_info array size
in order to free referenced objects in verifier.c:free_states().
Fix initialization of env->scc_cnt that was omitted in
verifier.c:compute_scc().
To reproduce the bug:
- build with CONFIG_DEBUG_KMEMLEAK
- boot and load bpf program with loops, e.g.:
./veristat -q pyperf180.bpf.o
- initiate memleak scan and check results:
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
Fixes:
|
||
Sean Anderson
|
0808da36b9 |
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
printk_ratelimit is deprecated, since it shares state with all other printk sites. Additionally, the suppression message is printed at warning level even though the actual messages are printed at debug and are (usually) invisible! This can result in thousands of messages like retire_capture_urb: 4992 callbacks suppressed in the console, and can inhibit debugging since it is unclear what the source of the suppressed callbacks is. Switch to dev_dbg_ratelimited which doesn't print anything unless debug is enabled. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250801154710.739464-1-sean.anderson@linux.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Thomas Gleixner
|
e703b7e247 |
futex: Move futex cleanup to __mmdrop()
Futex hash allocations are done in mm_init() and the cleanup happens in
__mmput(). That works most of the time, but there are mm instances which
are instantiated via mm_alloc() and freed via mmdrop(), which causes the
futex hash to be leaked.
Move the cleanup to __mmdrop().
Fixes:
|
||
Roman Kisel
|
83e6384374 |
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
"boolean" is spelt as "blooean". Fix that. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250722161818.6139-1-romank@linux.microsoft.com |
||
Huacai Chen
|
0a91336e28 |
Merge tag 'bpf-next-6.17' into loongarch-next
LoongArch architecture changes for 6.17 have many bpf features such as trampoline, so merge 'bpf-next-6.17' to create a base to make bpf work well. |
||
|
Linus Torvalds
|
a6923c06a3 |
bpf-fixes
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmiNNksACgkQ6rmadz2v bTrKRhAAnju4bbFRHU88Y68p6Meq/jxgjxHZAkTqZA0Nvbu2cItPRL7XHAAhTWE7 OBEIm3UKCH4gs4fY8rDHiIgnnaQavXUmvXZblOIOjxnqRKJpU3px+wwJvGFq5Enq WP6UZV8tj+O2tNfNNYS+mgQvvIpUISHGpKimvx7ede3e1U3cJBkppbT3gooMHYuc 5s1QtYHWaPY/1DpkHgqJ2UPGcbT9/HSPGMHRNaHKjQTcNcLcrj7RRjchgXqcc7Vs hVijvVrLiuK0MyU42ritmaqvjjgD6hKPZguRQe2/hAtrOo0Alf+4mXkMgam7simN iHfGc7nhw1xAFTPj4WXahja89G00FdDN5NR37Rgurm/i2fY7BuXAkMjiMiwGB3C3 jk2wG3RSifYeC2rxhkYJdqcx8Cz6m+pjgyJ2o9Jy5dn426VXg/kzkUXpl6u5jaPZ SmKoo9Xu1r7xqTaUc9kk8pJI5Xt9vD5oQjF2KQuPZXxNidiwW6k2OGbW+wF26nEi Q6pfDu3pvHAd/UE6cD5yFe97o3Cc2XfGwI/Sv2k99UVPvNcvfAvVo9fsItHBhCPn zHkihW2S0zmbBlhcrB+PrLclNgLleP9JukFN+5scc0a9lbQxIm6v2TNKGlBfDQtO I+Kn266oqT4BEgnQGlCQquINnQAdmS8VMnnunGOu6+rwPUtkI7E= =XLHS -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Alexei Starovoitov: - Fix kCFI failures in JITed BPF code on arm64 (Sami Tolvanen, Puranjay Mohan, Mark Rutland, Maxwell Bland) - Disallow tail calls between BPF programs that use different cgroup local storage maps to prevent out-of-bounds access (Daniel Borkmann) - Fix unaligned access in flow_dissector and netfilter BPF programs (Paul Chaignon) - Avoid possible use of uninitialized mod_len in libbpf (Achill Gilgenast) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Test for unaligned flow_dissector ctx access bpf: Improve ctx access verifier error message bpf: Check netfilter ctx accesses are aligned bpf: Check flow_dissector ctx accesses are aligned arm64/cfi,bpf: Support kCFI + BPF on arm64 cfi: Move BPF CFI types and helpers to generic code cfi: add C CFI type macro libbpf: Avoid possible use of uninitialized mod_len bpf: Fix oob access in cgroup local storage bpf: Move cgroup iterator helpers to bpf.h bpf: Move bpf map owner out of common struct bpf: Add cookie object to bpf maps |
||
|
Linus Torvalds
|
f4f346c346 |
[GIT PULL] perf tools changes for v6.17
Build-ID processing goodies
---------------------------
Build-IDs are content based hashes to link regions of memory to ELF files
in post processing. They have been available in distros for quite a while:
$ file /bin/bash
/bin/bash: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=707a1c670cd72f8e55ffedfbe94ea98901b7ce3a,
for GNU/Linux 3.2.0, stripped
It is possible to ask the kernel to get it from mmap executable backing
storage at time they are being put in place and send it as metadata at
that moment to have in perf.data.
Prefer that across the board to speed up 'record' time - it post processes
the samples to find binaries touched by any samples and to save them with
build-ID. It can skip reading build-ID in userspace if it comes from the
kernel.
perf record
-----------
* Make --buildid-mmap default. The kernel can generate MMAP2 events
with a build-ID from ELF header. Use that by default instead of using
inode and device ID to identify binaries. It also can be disabled
with --no-buildid-mmap.
* Use BPF for -u/--uid option to sample processes belong to a user.
BPF can track user processes more accurately and the existing logic
often fails to get the list of processes due to race with reading the
/proc filesystem.
* Generate PERF_RECORD_BPF_METADATA when it profiles BPF programs and
they have variables starting with "bpf_metadata_". This will help to
identify BPF objects used in the profile. This has been supported in
bpftool for some time and allows the recording of metadata such as
commit hashes, versions, etc, that now gets recorded in perf.data as
well.
* Collect list of DSOs touched in the sample callchains as well as in
the sample itself. This would increase the processing time at the end
of record, but can improve the data quality.
perf stat
---------
* Add a new 'drm' pseudo-PMU support like in 'hwmon'. It can collect
DRM usage stats using fdinfo in /proc.
On my Intel laptop, it shows like below:
$ perf list drm
...
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
...
$ sudo perf stat -a -e drm-engine-render,drm-engine-video,drm-engine-capacity-video sleep 1
Performance counter stats for 'system wide':
48,137,316,988,873 ns drm-engine-render
34,452,696,746 ns drm-engine-video
20 capacity drm-engine-capacity-video
1.002086194 seconds time elapsed
perf list
---------
* Add description for software events. The description is in JSON format
and the event parser now can handle the software events like others
(for example, it's case-insensitive and subject to wildcard matching).
$ perf list software
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
emulation-faults
[Number of kernel handled unimplemented instruction faults handled through emulation. Unit: software]
faults
[Number of page faults [This event is an alias of page-faults]. Unit: software]
major-faults
[Number of major page faults. Major faults require I/O to handle. Unit: software]
migrations
[Number of times a process has migrated to a new CPU [This event is an alias of cpu-migrations]. Unit: software]
minor-faults
[Number of minor page faults. Minor faults don't require I/O to handle. Unit: software]
page-faults
[Number of page faults [This event is an alias of faults]. Unit: software]
task-clock
[Per-task high-resolution timer based event. Unit: software]
perf ftrace
-----------
* Add -e/--events option to perf ftrace latency to measure latency
between the two events instead of a function.
$ sudo perf ftrace latency -ab -e i915_request_wait_begin,i915_request_wait_end --hide-empty -- sleep 1
# DURATION | COUNT | GRAPH |
256 - 512 us | 4 | ###### |
2 - 4 ms | 2 | ### |
4 - 8 ms | 12 | ################### |
8 - 16 ms | 10 | ################ |
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
* Add new function graph tracer options (--graph-opts) to display more
info like arguments and return value. They will be passed to the
kernel ftrace directly.
$ sudo perf ftrace -G vfs_write --graph-opts retval,retaddr
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
...
5) | mutex_unlock() { /* <-rb_simple_write+0xda/0x150 */
5) 0.188 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cf90e */
5) | rt_mutex_slowunlock() { /* <-rb_simple_write+0xda/0x150 */
5) | _raw_spin_lock_irqsave() { /* <-rt_mutex_slowunlock+0x4f/0x200 */
5) 0.123 us | preempt_count_add(); /* <-_raw_spin_lock_irqsave+0x23/0x90 ret=0x0 */
5) 0.128 us | local_clock(); /* <-__lock_acquire.isra.0+0x17a/0x740 ret=0x3bf2a3cfc8b */
5) 0.086 us | do_raw_spin_trylock(); /* <-_raw_spin_lock_irqsave+0x4a/0x90 ret=0x1 */
5) 0.845 us | } /* _raw_spin_lock_irqsave ret=0x292 */
...
misc
----
* Add perf archive --exclude-buildids <FILE> option to skip some binaries.
The format of the FILE should be same as an output of perf buildid-list.
* Get rid of dependency of libcrypto. It was just to get SHA-1 hash so
implement it directly like in the kernel. A side effect is that it
needs -fno-strict-aliasing compiler option (again, like in the kernel).
* Convert all shell script tests to use bash.
Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaIz8IAAKCRCMstVUGiXM
g4huAP9WDTZIT9E0gx4yLJ0slyBV/5ROaUWX8OUVO3JJ/1sEUgEAp3wsSmDYc1/o
XTvqNNjxo1LG+bEmZk8yNAJ2FYghPgw=
=6enW
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.17-2025-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build-ID processing goodies:
Build-IDs are content based hashes to link regions of memory to ELF
files in post processing. They have been available in distros for
quite a while:
$ file /bin/bash
/bin/bash: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=707a1c670cd72f8e55ffedfbe94ea98901b7ce3a,
for GNU/Linux 3.2.0, stripped
It is possible to ask the kernel to get it from mmap executable
backing storage at time they are being put in place and send it as
metadata at that moment to have in perf.data.
Prefer that across the board to speed up 'record' time - it post
processes the samples to find binaries touched by any samples and
to save them with build-ID. It can skip reading build-ID in
userspace if it comes from the kernel.
perf record:
* Make --buildid-mmap default. The kernel can generate MMAP2 events
with a build-ID from ELF header. Use that by default instead of using
inode and device ID to identify binaries. It also can be disabled
with --no-buildid-mmap.
* Use BPF for -u/--uid option to sample processes belong to a user.
BPF can track user processes more accurately and the existing logic
often fails to get the list of processes due to race with reading the
/proc filesystem.
* Generate PERF_RECORD_BPF_METADATA when it profiles BPF programs and
they have variables starting with "bpf_metadata_". This will help to
identify BPF objects used in the profile. This has been supported in
bpftool for some time and allows the recording of metadata such as
commit hashes, versions, etc, that now gets recorded in perf.data as
well.
* Collect list of DSOs touched in the sample callchains as well as in
the sample itself. This would increase the processing time at the end
of record, but can improve the data quality.
perf stat:
* Add a new 'drm' pseudo-PMU support like in 'hwmon'. It can collect
DRM usage stats using fdinfo in /proc.
On my Intel laptop, it shows like below:
$ perf list drm
...
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
...
$ sudo perf stat -a -e drm-engine-render,drm-engine-video,drm-engine-capacity-video sleep 1
Performance counter stats for 'system wide':
48,137,316,988,873 ns drm-engine-render
34,452,696,746 ns drm-engine-video
20 capacity drm-engine-capacity-video
1.002086194 seconds time elapsed
perf list
* Add description for software events. The description is in JSON format
and the event parser now can handle the software events like others
(for example, it's case-insensitive and subject to wildcard matching).
$ perf list software
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
emulation-faults
[Number of kernel handled unimplemented instruction faults handled through emulation. Unit: software]
faults
[Number of page faults [This event is an alias of page-faults]. Unit: software]
major-faults
[Number of major page faults. Major faults require I/O to handle. Unit: software]
migrations
[Number of times a process has migrated to a new CPU [This event is an alias of cpu-migrations]. Unit: software]
minor-faults
[Number of minor page faults. Minor faults don't require I/O to handle. Unit: software]
page-faults
[Number of page faults [This event is an alias of faults]. Unit: software]
task-clock
[Per-task high-resolution timer based event. Unit: software]
perf ftrace:
* Add -e/--events option to perf ftrace latency to measure latency
between the two events instead of a function.
$ sudo perf ftrace latency -ab -e i915_request_wait_begin,i915_request_wait_end --hide-empty -- sleep 1
# DURATION | COUNT | GRAPH |
256 - 512 us | 4 | ###### |
2 - 4 ms | 2 | ### |
4 - 8 ms | 12 | ################### |
8 - 16 ms | 10 | ################ |
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
* Add new function graph tracer options (--graph-opts) to display more
info like arguments and return value. They will be passed to the
kernel ftrace directly.
$ sudo perf ftrace -G vfs_write --graph-opts retval,retaddr
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
...
5) | mutex_unlock() { /* <-rb_simple_write+0xda/0x150 */
5) 0.188 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cf90e */
5) | rt_mutex_slowunlock() { /* <-rb_simple_write+0xda/0x150 */
5) | _raw_spin_lock_irqsave() { /* <-rt_mutex_slowunlock+0x4f/0x200 */
5) 0.123 us | preempt_count_add(); /* <-_raw_spin_lock_irqsave+0x23/0x90 ret=0x0 */
5) 0.128 us | local_clock(); /* <-__lock_acquire.isra.0+0x17a/0x740 ret=0x3bf2a3cfc8b */
5) 0.086 us | do_raw_spin_trylock(); /* <-_raw_spin_lock_irqsave+0x4a/0x90 ret=0x1 */
5) 0.845 us | } /* _raw_spin_lock_irqsave ret=0x292 */
...
Misc:
* Add perf archive --exclude-buildids <FILE> option to skip some binaries.
The format of the FILE should be same as an output of perf buildid-list.
* Get rid of dependency of libcrypto. It was just to get SHA-1 hash so
implement it directly like in the kernel. A side effect is that it
needs -fno-strict-aliasing compiler option (again, like in the kernel).
* Convert all shell script tests to use bash"
* tag 'perf-tools-for-v6.17-2025-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
perf record: Cache build-ID of hit DSOs only
perf test: Ensure lock contention using pipe mode
perf python: Stop using deprecated PyUnicode_AsString()
perf list: Skip ABI PMUs when printing pmu values
perf list: Remove tracepoint printing code
perf tp_pmu: Add event APIs
perf tp_pmu: Factor existing tracepoint logic to new file
perf parse-events: Remove non-json software events
perf jevents: Add common software event json
perf tools: Remove libtraceevent in .gitignore
perf test: Fix comment ordering
perf sort: Use perf_env to set arch sort keys and header
perf test: Move PERF_SAMPLE_WEIGHT_STRUCT parsing to common test
perf sample: Remove arch notion of sample parsing
perf env: Remove global perf_env
perf trace: Avoid global perf_env with evsel__env
perf auxtrace: Pass perf_env from session through to mmap read
perf machine: Explicitly pass in host perf_env
perf bench synthesize: Avoid use of global perf_env
perf top: Make perf_env locally scoped
...
|
||
|
Linus Torvalds
|
0905809b38 |
parisc architecture fixes for kernel v6.17-rc1:
The parisc kernel wrongly allows reading from read-protected userspace memory without faulting, e.g. when userspace uses mprotect() to read-protect a memory area and then uses a pointer to this memory in a write(2, addr, 1) syscall. To fix this issue, Dave Anglin developed a set of patches which use the proberi assembler instruction to additionally check read access permissions at runtime. Randy Dunlap contributed two patches to fix a minor typo and to explain why a 32-bit compiler is needed although a 64-bit kernel is built. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaIz+oAAKCRD3ErUQojoP Xy2WAQDMnAWKA62nvsWnwYYtHK7t8tA03XPJ4HlcEOW+EKdW1AEA3yKFBnDQMEm1 zXrjzavY044/00u1Wba3glExQ3Vo0go= =0F3R -----END PGP SIGNATURE----- Merge tag 'parisc-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - The parisc kernel wrongly allows reading from read-protected userspace memory without faulting, e.g. when userspace uses mprotect() to read-protect a memory area and then uses a pointer to this memory in a write(2, addr, 1) syscall. To fix this issue, Dave Anglin developed a set of patches which use the proberi assembler instruction to additionally check read access permissions at runtime. - Randy Dunlap contributed two patches to fix a minor typo and to explain why a 32-bit compiler is needed although a 64-bit kernel is built * tag 'parisc-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Revise __get_user() to probe user read access parisc: Revise gateway LWS calls to probe user read access parisc: Drop WARN_ON_ONCE() from flush_cache_vmap parisc: Try to fixup kernel exception in bad_area_nosemaphore path of do_page_fault() parisc: Define and use set_pte_at() parisc: Rename pte_needs_flush() to pte_needs_cache_flush() in cache.c parisc: Check region is readable by user in raw_copy_from_user() parisc: Update comments in make_insert_tlb parisc: Makefile: explain that 64BIT requires both 32-bit and 64-bit compilers parisc: Makefile: fix a typo in palo.conf |
||
Steven Rostedt
|
3ca824369b |
tracing: Have unsigned int function args displayed as hexadecimal
Most function arguments that are passed in as unsigned int or unsigned
long are better displayed as hexadecimal than normal integer. For example,
the functions:
static void __create_object(unsigned long ptr, size_t size,
int min_count, gfp_t gfp, unsigned int objflags);
static bool stack_access_ok(struct unwind_state *state, unsigned long _addr,
size_t len);
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
Show up in the trace as:
__create_object(ptr=-131387050520576, size=4096, min_count=1, gfp=3264, objflags=0) <-kmem_cache_alloc_noprof
stack_access_ok(state=0xffffc9000233fc98, _addr=-60473102566256, len=8) <-unwind_next_frame
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
Instead, by displaying unsigned as hexadecimal, they look more like this:
__create_object(ptr=0xffff8881028d2080, size=0x280, min_count=1, gfp=0x82820, objflags=0x0) <-kmem_cache_alloc_node_noprof
stack_access_ok(state=0xffffc90000003938, _addr=0xffffc90000003930, len=0x8) <-unwind_next_frame
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs
Which is much easier to understand as most unsigned longs are usually just
pointers. Even the "unsigned int cnt" in __local_bh_disable_ip() looks
better as hexadecimal as a lot of flags are passed as unsigned.
Changes since v2: https://lore.kernel.org/20250801111453.01502861@gandalf.local.home
- Use btf_int_encoding() instead of open coding it (Martin KaFai Lau)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/20250801165601.7770d65c@gandalf.local.home
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Linus Torvalds
|
d41e5839d8 |
cxl for v6.17
- Add documentation template for CXL conventions to document CXL platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and improve
readability
- Add return for the dummy version of cxl_decoder_detach() without CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix
-----BEGIN PGP SIGNATURE-----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=79ot
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The most significant changes in this pull request is the series that
introduces ACQUIRE() and ACQUIRE_ERR() macros to replace conditional
locking and ease the pain points of scoped_cond_guard().
The series also includes follow on changes that refactor the CXL
sub-system to utilize the new macros.
Detail summary:
- Add documentation template for CXL conventions to document CXL
platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform
enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address
availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and
improve readability
- Add return for the dummy version of cxl_decoder_detach() without
CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix"
* tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (28 commits)
Documentation/ABI/testing/debugfs-cxl: Add 'cxl' to clear_poison path
cxl/region: Fix an ERR_PTR() vs NULL bug
cxl/events: Trace Memory Sparing Event Record
cxl/events: Add extra validity checks for CVME count in DRAM Event Record
cxl/events: Add extra validity checks for corrected memory error count in General Media Event Record
cxl/events: Update Common Event Record to CXL spec rev 3.2
cxl: Fix -Werror=return-type in cxl_decoder_detach()
cleanup: Fix documentation build error for ACQUIRE updates
cxl: Convert to ACQUIRE() for conditional rwsem locking
cxl/region: Consolidate cxl_decoder_kill_region() and cxl_region_detach()
cxl/region: Move ready-to-probe state check to a helper
cxl/region: Split commit_store() into __commit() and queue_reset() helpers
cxl/decoder: Drop pointless locking
cxl/decoder: Move decoder register programming to a helper
cxl/mbox: Convert poison list mutex to ACQUIRE()
cleanup: Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
cxl: Remove core/acpi.c and cxl core dependency on ACPI
cxl/core: Using cxl_resource_contains_addr() to check address availability
cxl/edac: Fix wrong dpa checking for PPR operation
cxl/core: Introduce a new helper cxl_resource_contains_addr()
...
|
||
Sharath Chandra Vurukala
|
1dbf1d590d |
net: Add locking to protect skb->dev access in ip_output
In ip_output() skb->dev is updated from the skb_dst(skb)->dev this can become invalid when the interface is unregistered and freed, Introduced new skb_dst_dev_rcu() function to be used instead of skb_dst_dev() within rcu_locks in ip_output.This will ensure that all the skb's associated with the dev being deregistered will be transnmitted out first, before freeing the dev. Given that ip_output() is called within an rcu_read_lock() critical section or from a bottom-half context, it is safe to introduce an RCU read-side critical section within it. Multiple panic call stacks were observed when UL traffic was run in concurrency with device deregistration from different functions, pasting one sample for reference. [496733.627565][T13385] Call trace: [496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0 [496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498 [496733.627595][T13385] ip_finish_output+0xa4/0xf4 [496733.627605][T13385] ip_output+0x100/0x1a0 [496733.627613][T13385] ip_send_skb+0x68/0x100 [496733.627618][T13385] udp_send_skb+0x1c4/0x384 [496733.627625][T13385] udp_sendmsg+0x7b0/0x898 [496733.627631][T13385] inet_sendmsg+0x5c/0x7c [496733.627639][T13385] __sys_sendto+0x174/0x1e4 [496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c [496733.627653][T13385] invoke_syscall+0x58/0x11c [496733.627662][T13385] el0_svc_common+0x88/0xf4 [496733.627669][T13385] do_el0_svc+0x2c/0xb0 [496733.627676][T13385] el0_svc+0x2c/0xa4 [496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4 [496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8 Changes in v3: - Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn. - Dropped legacy lines mistakenly pulled in from an outdated branch. Changes in v2: - Addressed review comments from Eric Dumazet - Used READ_ONCE() to prevent potential load/store tearing - Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Takamitsu Iwai
|
ae8508b25d |
net/sched: taprio: enforce minimum value for picos_per_byte
Syzbot reported a WARNING in taprio_get_start_time().
When link speed is 470,589 or greater, q->picos_per_byte becomes too
small, causing length_to_duration(q, ETH_ZLEN) to return zero.
This zero value leads to validation failures in fill_sched_entry() and
parse_taprio_schedule(), allowing arbitrary values to be assigned to
entry->interval and cycle_time. As a result, sched->cycle can become zero.
Since SPEED_800000 is the largest defined speed in
include/uapi/linux/ethtool.h, this issue can occur in realistic scenarios.
To ensure length_to_duration() returns a non-zero value for minimum-sized
Ethernet frames (ETH_ZLEN = 60), picos_per_byte must be at least 17
(60 * 17 > PSEC_PER_NSEC which is 1000).
This patch enforces a minimum value of 17 for picos_per_byte when the
calculated value would be lower, and adds a warning message to inform
users that scheduling accuracy may be affected at very high link speeds.
Fixes:
|
||
Wang Liang
|
d46e51f1c7 |
net: drop UFO packets in udp_rcv_segment()
When sending a packet with virtio_net_hdr to tun device, if the gso_type in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr size, below crash may happen. ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:4572! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:skb_pull_rcsum+0x8e/0xa0 Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000 RSP: 0018:ffffc900001fba38 EFLAGS: 00000297 RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948 RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062 RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000 R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900 FS: 000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0 Call Trace: <TASK> udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445 udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475 udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626 __udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690 ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233 ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579 ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636 ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670 __netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067 netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210 napi_complete_done+0x78/0x180 net/core/dev.c:6580 tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909 tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984 vfs_write+0x300/0x420 fs/read_write.c:593 ksys_write+0x60/0xd0 fs/read_write.c:686 do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63 </TASK> To trigger gso segment in udp_queue_rcv_skb(), we should also set option UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try to pull udphdr, but the skb size has been segmented to gso size, which leads to this crash. Previous commit |
||
|
Linus Torvalds
|
111857421c |
remoteproc updates for v6.17
Make the Xilinx remoteproc driver support running on only a single core, disable still unsupported remoteproc features, and stop the remoteproc on shutdown to facilitate kexec. Conclude the renaming of the Qualcomm ADSP driver to "PAS" that was started many years ago. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmiNGowVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FUYYQAKByyveRNeRaOKYcbHCLUsGwVZ5A 4JIXqIrHcIjPgcPNLvCudhz8n+Bp5pNxNEu03yDaSu5QkHz2gDEYZ83ZIvFeKiax cd3r/DtdnlHKRArJlx6un9lhi3veXOwbyE7GA6lPZ/jKz4usqbSGX3aSAeAK0g2D DiMISRMfBeHUl9cXtawL5lQSKl7GELJq2gz2+mY1mUivhplzSIgcIrQuF6w1pFNt 20Sad5jhgOm0ELMNuLY7YuWYKon56OUwjF5T0wZetpwHmvJ/vv18Z1CLwSm9iwaG T3IXLFL1ED28sdCT3cfpbxnp6S7pn1MhzNYVYN6RImlZmtAz9YW5zJrj4EwVu0Bk K4e+UC2BkechT7lOxjFL5qhsZpkUrQZXccTf3fARn0GeCBlyfjTRMp3He8wJLDx1 FemCM7OXSc2OXnAm2231BxHu2T0MRY5Z3ozPJEeg0M3hj5oaWBflctp+puOoBwBe g4VcY8yQ3qAzfts7RgyB9gjRQ8KhJ6FABmZZv2RVTtdjsH3Sa1MLB3T+PzvNW2z4 L9/t4cIvp4xMXKztJVzVsaHAPw2P/ZRIo+Xfg6AgIvZ0ebM9ZSTe2rGHX/2tE14o FWEUs7g58RE5NcJIqqyDaIfBrgvG8HQiLOf37uZDboCFV/Z4RP8Z6pHa8+YyiDvB 8LtKweBQGD/MmgcC =yhyx -----END PGP SIGNATURE----- Merge tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - Make the Xilinx remoteproc driver support running on only a single core, disable still unsupported remoteproc features, and stop the remoteproc on shutdown to facilitate kexec. - Conclude the renaming of the Qualcomm ADSP driver to "PAS" that was started many years ago. * tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: remoteproc: xlnx: Fix kernel-doc warnings remoteproc: xlnx: Disable unsupported features remoteproc: xlnx: Add shutdown callback remoteproc: xlnx: Allow single core use in split mode dt-bindings: remoteproc: qcom,sa8775p-pas: Correct the interrupt number remoteproc: Don't use %pK through printk dt-bindings: remoteproc: qcom,sm8150-pas: Document QCS615 remoteproc remoteproc: qcom: pas: Conclude the rename from adsp |
||
Paul Chaignon
|
d8d2d9d12f |
selftests/bpf: Test for unaligned flow_dissector ctx access
This patch adds tests for two context fields where unaligned accesses were not properly rejected. Note the new macro is similar to the existing narrow_load macro, but we need a different description and access offset. Combining the two macros into one is probably doable but I don't think it would help readability. vmlinux.h is included in place of bpf.h so we have the definition of struct bpf_nf_ctx. Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/bf014046ddcf41677fb8b98d150c14027e9fddba.1754039605.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Florian Fainelli
|
a81649a4ef |
net: mdio: mdio-bcm-unimac: Correct rate fallback logic
When the parent clock is a gated clock which has multiple parents, the clock provider (clk-scmi typically) might return a rate of 0 since there is not one of those particular parent clocks that should be chosen for returning a rate. Prior to |
||
Eric Dumazet
|
d45cf1e7d7 |
ipv6: reject malicious packets in ipv6_gso_segment()
syzbot was able to craft a packet with very long IPv6 extension headers
leading to an overflow of skb->transport_header.
This 16bit field has a limited range.
Add skb_reset_transport_header_careful() helper and use it
from ipv6_gso_segment()
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
<TASK>
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
__skb_gso_segment+0x342/0x510 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
__dev_xmit_skb net/core/dev.c:4102 [inline]
__dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679
Fixes:
|
||
|
Eric Dumazet
|
7cbd49795d |
selftests: avoid using ifconfig
ifconfig is deprecated and not always present, use ip command instead.
Fixes:
|
||
Geert Uytterhoeven
|
a4f0866e3d |
dpll: Make ZL3073X invisible
Currently, the user is always asked about the Microchip Azurite
DPLL/PTP/SyncE core driver, even when I2C and SPI are disabled, and thus
the driver cannot be used at all.
Fix this by making the Kconfig symbol for the core driver invisible
(unless compile-testing), and selecting it by the bus glue sub-drivers.
Drop the modular defaults, as drivers should not default to enabled.
Fixes:
|
||
Christoph Paasch
|
77bf1c55b2 |
net/mlx5: Correctly set gso_segs when LRO is used
When gso_segs is left at 0, a number of assumptions will end up being incorrect throughout the stack. For example, in the GRO-path, we set NAPI_GRO_CB()->count to gso_segs. So, if a non-LRO'ed packet followed by an LRO'ed packet is being processed in GRO, the first one will have NAPI_GRO_CB()->count set to 1 and the next one to 0 (in dev_gro_receive()). Since commit |
||
|
Linus Torvalds
|
821c9e515d |
virtio, vhost: features, fixes
vhost can now support legacy threading if enabled in Kconfig vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc vhost now supports the in-order feature guest bits missed the merge window fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmiMvQEPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpgr8IAKUrIjqqTYXLkbCWn6tK8T+LxZ6LkMkyHA1v AJ+y5fKDeLsT5QpusD1XRjXJVqXBwQEsTN0pNVuhWHlcCpUeOFEHuJaf/QMncbc3 deFlUfMa3ihniUxBuyhojlWURsf94uTC906lCFXlIsfSKH2CW6/SjKvqR0SH5PhN 5WaqRYiSFFwDlyG2Ul4e5temP/er2KuZfYyvcYCU8VdSEp6bjvqCHd9ztFIVuByp fFWsrHce6IqR8ixOOzavEjzfd8WAN3LGzXntj5KEaX3fZ6HxCZCMv+rNVqvJmLps cSrTgIUo60nCiZb8klUCS1YTEEvmdmJg3UmmddIpIhcsCYJSbOU= =2dxm -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - vhost can now support legacy threading if enabled in Kconfig - vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc - vhost now supports the in-order feature. guest bits missed the merge window. - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits) vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers vsock/virtio: Rename virtio_vsock_skb_rx_put() vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers vsock/virtio: Move SKB allocation lower-bound check to callers vsock/virtio: Rename virtio_vsock_alloc_skb() vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put() vsock/virtio: Validate length in packet header before skb_put() vhost/vsock: Avoid allocating arbitrarily-sized SKBs vhost_net: basic in_order support vhost: basic in order support vhost: fail early when __vhost_add_used() fails vhost: Reintroduce kthread API and add mode selection vdpa: Fix IDR memory leak in VDUSE module exit vdpa/mlx5: Fix release of uninitialized resources on error path vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit virtio: virtio_dma_buf: fix missing parameter documentation vhost: Fix typos vhost: vringh: Remove unused functions vhost: vringh: Remove unused iotlb functions ... |
||
Edward Cree
|
60bda1ba06 |
sfc: unfix not-a-typo in comment
Commit
|
||
|
Linus Torvalds
|
0bd0a41a51 |
pci-v6.17-changes
-----BEGIN PGP SIGNATURE-----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=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
||
Lorenzo Bianconi
|
38358fa3cc |
net: airoha: Fix PPE table access in airoha_ppe_debugfs_foe_show()
In order to avoid any possible race we need to hold the ppe_lock
spinlock accessing the hw PPE table. airoha_ppe_foe_get_entry routine is
always executed holding ppe_lock except in airoha_ppe_debugfs_foe_show
routine. Fix the problem introducing airoha_ppe_foe_get_entry_locked
routine.
Fixes:
|
||
Ido Schimmel
|
f8fded7536 |
selftests: net: Fix flaky neighbor garbage collection test
The purpose of the "Periodic garbage collection" test case is to make
sure that "extern_valid" neighbors are not flushed during periodic
garbage collection, unlike regular neighbor entries.
The test case is currently doing the following:
1. Changing the base reachable time to 10 seconds so that periodic
garbage collection will run every 5 seconds.
2. Changing the garbage collection stale time to 5 seconds so that
neighbors that have not been used in the last 5 seconds will be
considered for removal.
3. Waiting for the base reachable time change to take effect.
4. Adding an "extern_valid" neighbor, a non-"extern_valid" neighbor and
a bunch of other neighbors so that the threshold ("thresh1") will be
crossed and stale neighbors will be flushed during garbage
collection.
5. Waiting for 10 seconds to give garbage collection a chance to run.
6. Checking that the "extern_valid" neighbor was not flushed and that
the non-"extern_valid" neighbor was flushed.
The test sometimes fails in the netdev CI because the non-"extern_valid"
neighbor was not flushed. I am unable to reproduce this locally, but my
theory that since we do not know exactly when the periodic garbage
collection runs, it is possible for it to run at a time when the
non-"extern_valid" neighbor is still not considered stale.
Fix by moving the addition of the two neighbors before step 3 and by
reducing the garbage collection stale time to 1 second, to ensure that
both neighbors are considered stale when garbage collection runs.
Fixes:
|
||
|
Steven Rostedt
|
db5f0c3e3e |
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
The function ring_buffer_write() has a goto out to only do a preempt_enable_notrace(). This can be replaced by a guard. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.205479143@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
12d5189615 |
tracing: Use __free(kfree) in trace.c to remove gotos
There's a couple of locations that have goto out in trace.c for the only purpose of freeing a variable that was allocated. These can be replaced with __free(kfree). Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203858.040892777@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
debe57fbe1 |
tracing: Add guard() around locks and mutexes in trace.c
There's several locations in trace.c that can be simplified by using guards around raw_spin_lock_irqsave, mutexes and preempt disabling. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.879085376@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
788fa4b47c |
tracing: Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer is already being written to by the same context (for example, a trace_printk() in between a ring_buffer_lock_reserve() and a ring_buffer_unlock_commit()). In order to not trigger the recursion detection, these functions use ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for these functions so that their use cases can be simplified and not need to use goto for the release. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.710501021@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
c89504a703 |
tracing: Remove unneeded goto out logic
Several places in the trace.c file there's a goto out where the out is simply a return. There's no reason to jump to the out label if it's not doing any more logic but simply returning from the function. Replace the goto outs with a return and remove the out labels. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250801203857.538726745@kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
877d94c74e |
linux-watchdog 6.17-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmiMtmUACgkQ+iyteGJfRsqMPACfTSyOYSTEb7I3C1zG6GL6908D aI8AoIJq4TaJOjcqs7smi2OcGPg9Spki =mrG8 -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.17-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition - Various improvements and fixes * tag 'linux-watchdog-6.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race condition watchdog: dw_wdt: Fix default timeout watchdog: Don't use "proxy" headers watchdog: it87_wdt: Don't use "proxy" headers watchdog: renesas_wdt: Convert to DEFINE_SIMPLE_DEV_PM_OPS() watchdog: iTCO_wdt: Report error if timeout configuration fails watchdog: rti_wdt: Use of_reserved_mem_region_to_resource() for "memory-region" dt-bindings: watchdog: nxp,pnx4008-wdt: allow clocks property watchdog: ziirave_wdt: check record length in ziirave_firm_verify() |
||
Mark Brown
|
5bbb3913b7 |
Add audio support for acp7.2 platform
Merge series from Venkata Prasad Potturu <venkataprasad.potturu@amd.com>: This patch series is to add legacy and sof audio support for acp7.2 platform. |
||
|
Linus Torvalds
|
196dacf454 |
dmaengine updates for v6.17
Core: - Managed API for dma channel request New support: - Sophgo CV18XX/SG200X dmamux driver - Qualcomm Milos GPI, sc8280xp GPI support Updates: - Conversion of brcm,iproc-sba and marvell,orion-xor binding - Unused code cleanup across drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmiMsksACgkQfBQHDyUj g0dYdhAAi/ekDqoTUjGSaUAL2Bq2sMn4yxt45p6z1sBNIyCt6D1Exek6GOsNeyKt It99SDs/Iw+6HoEWbx46FmLYUV0/Dm/vRjMvw5feLT+XWHN4wTffQuA78w4YOzCV Sf1bzkt1VW5+NQQpKatGzjRwGYiFRUACASFhDZel31B1zGa8jYZLjwKdHenU3+HW 5ItIoujGAXYawk0WKHhkwJxkN1FoNqwCiOcEmKtwekLAqHSw2C20uzBhxipeckf0 ynW3IFRWH9LMRdYQOcLcE08Bx43xKcUM8WKvdwmein/mFY0KFV5ycGBsJGzDLi0N MLbgnq1FynqfVf0/eEe/+kOojoWjFahiEAn+ceVoj4QLpGFBgbmogeyxsnoUfhC9 LsN87UMurdrLXf56/xMchb7YY8NOF6DguebZVUfEi6oZ3bDGtMj/MzEOS5btWG1V qEQVkeZr7OYOMbD+LWVwl40LO41kFfmbKd1SsCHa1ri1qWiMUwBEhrFnT+eYkFtA u2ep/LN5OGKFTkrBYQvVvnvTtVN69aNCKJDuOpQvMAY/rxGWy8VF3D0B0XQTul/8 RTVmyIwGEk+nZ9d+TAMJYb/gU1mzgH7v3qAqXQa+zrF3JImwxOMU3ryFJoIRk17h /3YFJIL8q+HS/NLjEQW7VSIdVGOLiffbkjAWlcvddVSuINg3ESY= =j7pf -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Managed API for dma channel request New support: - Sophgo CV18XX/SG200X dmamux driver - Qualcomm Milos GPI, sc8280xp GPI support Updates: - Conversion of brcm,iproc-sba and marvell,orion-xor binding - Unused code cleanup across drivers" * tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits) dt-bindings: dma: fsl-mxs-dma: allow interrupt-names for fsl,imx23-dma-apbx dmaengine: xdmac: make it selectable for ARCH_MICROCHIP dt-bindings: dma: Convert marvell,orion-xor to DT schema dt-bindings: dma: Convert brcm,iproc-sba to DT schema dmaengine: nbpfaxi: Add missing check after DMA map dmaengine: mv_xor: Fix missing check after DMA map and missing unmap dt-bindings: dma: qcom,gpi: document the Milos GPI DMA Engine dmaengine: idxd: Remove __packed from structures dmaengine: ti: Do not enable by default during compile testing dmaengine: sh: Do not enable SH_DMAE_BASE by default during compile testing dmaengine: idxd: Fix warning for deadcode.deadstore dmaengine: mmp: Fix again Wvoid-pointer-to-enum-cast warning dmaengine: fsl-qdma: Add missing fsl_qdma_format kerneldoc dmaengine: qcom: gpi: Drop unused gpi_write_reg_field() dmaengine: fsl-dpaa2-qdma: Drop unused mc_enc() dmaengine: dw-edma: Drop unused dchan2dev() and chan2dev() dmaengine: stm32: Don't use %pK through printk dmaengine: stm32-dma: configure next sg only if there are more than 2 sgs dmaengine: sun4i: Simplify error handling in probe() dt-bindings: dma: qcom,gpi: Document the sc8280xp GPI DMA engine ... |
||
|
Linus Torvalds
|
8582976acc |
phy-for-6.17
- New Support
- Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support,
M31 eUSB2 PHY driver
- Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support
- Renesas RZ/V2N usb2-phy support
- Updates
- Bulk Yaml binding conversion By Rob H (too many to be listed)
- cadence: Sierra PCIe, USB PHY multilink configuration support
- Qualcomm refactoring of UFS PHY reset and UFS driver support for phy
calibrate API
-----BEGIN PGP SIGNATURE-----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=sHok
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31
eUSB2 PHY driver
- Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support
- Renesas RZ/V2N usb2-phy support
Updates:
- Bulk Yaml binding conversion By Rob H (too many to be listed)
- cadence: Sierra PCIe, USB PHY multilink configuration support
- Qualcomm refactoring of UFS PHY reset and UFS driver support for
phy calibrate API"
* tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits)
phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence
dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema
dt-bindings: phy: Convert ti,da830-usb-phy to DT schema
dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example
dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties
phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870
phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2
phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence
dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY
dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible
phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal
phy: rockchip-pcie: Enable all four lanes if required
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615
phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750
phy: qcom: m31-eusb2: drop registration printk
phy: qcom: m31-eusb2: fix match data santity check
phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P
phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers
dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values
phy: mediatek: tphy: Cleanup and document slew calibration
...
|
||
|
Linus Torvalds
|
7a64bdfaf3 |
sound updates #2 for 6.17-rc1
For catching up the remaining stuff for 6.17: only small updates
and the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations
can be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix
-----BEGIN PGP SIGNATURE-----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=Q+iZ
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
|
||
|
Linus Torvalds
|
6fac1139d9 |
soundwire updates for 6.17
Couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream parameters
handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of slave
alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable etc
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmiMrioACgkQfBQHDyUj
g0e7AxAAxuDTHXt4m5wnxicSrzSeWDfUTV4JgsiibD3JwyEa5ETOu7Ep6vSGe9t+
14gTY1z9/ItXsL2k3MdBi6N8b0lzvHG0/R2HA4hw+qYa+clv93pSC/DHlXKSzF6G
ejdDsx+bikUKwGWTS3zZ2+zEr0O8piXIB3oJJF7SwCz+NGUl0GA4WLSBbn9WMqW0
ftK+FpSJA2rm164mVEKgYW5XVSnFYajCILYD3fUx3hu+7mhqBX4yU0A381IvOXfT
gnCWCuRGFeSWS71SnBV5a7hJAPLYARUryJqFhDus+GJZEjN0YWpc1Nkf3uIaHK2S
ME6/htPcCWRoADcMPFJum/mIw6+kJRYYByWzOz8S0OhhUM2Xvtsrd4BniY5dcSy4
iRKn4tj1ZDflpsFqyDXb7eoqJvSgX49CHTIFs6YWhy4nisiB7MdfJDW/i9ebQkGc
2MGCqthmmWdp1GNZ6FCbtHMfZoD0I30q0HAdxlGOMJD86jU+VhyV4mYu22rVP5jV
EoYX5mCeMiUUyD70BSxdWcrFMM0FOyn8xhHAZIy6DqsXgKHXaoFc8Hn5schLY5Xc
/WWG/Oe0xqgbEew2JB5a/Yu9Wk4PlQP4XXSNceTtkxER3W5ktnPxDMsy2qpVm1N/
XJ1lILOviQJRMILwDZkGOKxcfo3hf/ZyyFYGC4wstFFewaXm8fo=
=+9EP
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream
parameters handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of
slave alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable
etc"
* tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Add support for acp7.2 platform
soundwire: stream: restore params when prepare ports fail
soundwire: debugfs: move debug statement outside of error handling
soundwire: amd: add check for status update registers
soundwire: intel_auxdevice: add rt721 codec to wake_capable_list
soundwire: Correct some property names
soundwire: update Intel BPT message length limitation
soundwire: intel_ace2.x: Use str_read_write() helper
soundwire: amd: cancel pending slave status handling workqueue during remove sequence
soundwire: amd: serialize amd manager resume sequence during pm_prepare
soundwire: qcom: demote probe registration printk
ASoC: cs42l43: Remove unnecessary work functions
soundwire: Move handle_nested_irq outside of sdw_dev_lock
MAINTAINERS: Remove Sanyog Kale as reviewer on SoundWire
|
||
Rob Clark
|
f22853435b |
drm/msm: Defer fd_install in SUBMIT ioctl
Avoid fd_install() until there are no more potential error paths, to
avoid put_unused_fd() after the fd is made visible to userspace.
Fixes:
|
||
|
Rob Clark
|
ad70e46e13 |
drm/msm: Fix submit error path cleanup
submit_unpin_objects() should come before we unlock the objects. This
fixes the splat:
WARNING: CPU: 2 PID: 2171 at drivers/gpu/drm/msm/msm_gem.h:395 msm_gem_unpin_locked+0x8c/0xd8 [msm]
Modules linked in: uinput snd_seq_dummy snd_hrtimer aes_ce_ccm snd_soc_wsa884x regmap_sdw q6prm_clocks q6apm_lpass_dais q6apm_dai snd_q6dsp_common q6prm snd_q6apm qcom_pd_mapper cdc_mbim cdc_wdm cdc_ncm r8153_ecm cdc_ether usbnet sunrpc nls_ascii nls_cp437 vfat fat snd_soc_x1e80100 snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_va_macro snd_soc_lpass_wsa_macro snd_soc_qcom_common soundwire_qcom snd_soc_lpass_macro_common snd_soc_hdmi_codec snd_soc_qcom_sdw ext4 snd_soc_core snd_compress soundwire_bus snd_pcm_dmaengine snd_seq mbcache jbd2 snd_seq_device snd_pcm pm8941_pwrkey snd_timer r8152 qcom_spmi_temp_alarm industrialio snd lenovo_yoga_slim7x ath12k mii arm_smccc_trng soundcore rng_core evdev loop panel_samsung_atna33xc20 msm ubwc_config drm_client_lib drm_gpuvm drm_exec gpu_sched drm_display_helper pmic_glink_altmode aux_hpd_bridge ucsi_glink qcom_battmgr phy_qcom_qmp_combo ps883x cec aux_bridge drm_dp_aux_bus i2c_hid_of aes_ce_blk drm_kms_helper aes_ce_cipher i2c_hid qcom_q6v5_pas
ghash_ce qcom_pil_info drm sha1_ce qcom_common phy_snps_eusb2 qcom_geni_serial qcom_q6v5 qcom_sysmon pinctrl_sm8550_lpass_lpi lpasscc_sc8280xp sbsa_gwdt mdt_loader gpio_keys pmic_glink i2c_dev efivarfs autofs4
CPU: 2 UID: 1000 PID: 2171 Comm: gnome-shell Not tainted 6.16.0-rc4-debug+ #25 PREEMPT(voluntary)
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN53WW 08/02/2024
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : msm_gem_unpin_locked+0x8c/0xd8 [msm]
lr : msm_gem_unpin_locked+0x88/0xd8 [msm]
sp : ffff80009c963820
x29: ffff80009c963820 x28: ffff80009c9639f8 x27: ffff00080552a830
x26: 0000000000000000 x25: ffff0009d5655800 x24: 0000000000000000
x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
x20: ffff000831db5480 x19: ffff000816e74400 x18: 0000000000000000
x17: 0000000000000000 x16: ffffc1396afdd720 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: ffff0008c065bc00
x11: ffff0008c065c000 x10: 0000000000000000 x9 : ffffc13945b19074
x8 : 0000000000000000 x7 : 0000000000000209 x6 : 0000000000000002
x5 : 0000000000019d01 x4 : ffff0008ba8db080 x3 : 000000000004093f
x2 : ffff3ed5e727f000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
msm_gem_unpin_locked+0x8c/0xd8 [msm] (P)
msm_ioctl_gem_submit+0x32c/0x1760 [msm]
drm_ioctl_kernel+0xc8/0x138 [drm]
drm_ioctl+0x2c8/0x618 [drm]
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x64/0xe8
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x54/0x1d8
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x19c/0x1a0
irq event stamp: 2185036
hardirqs last enabled at (2185035): [<ffffc1396afeef9c>] _raw_spin_unlock_irqrestore+0x74/0x80
hardirqs last disabled at (2185036): [<ffffc1396afd8164>] el1_dbg+0x24/0x90
softirqs last enabled at (2184778): [<ffffc13969675e44>] fpsimd_restore_current_state+0x3c/0x328
softirqs last disabled at (2184776): [<ffffc13969675e14>] fpsimd_restore_current_state+0xc/0x328
---[ end trace 0000000000000000 ]---
Fixes:
|
||
|
Rob Clark
|
de651b6e04 |
drm/msm: Fix refcnt underflow in error path
If we hit an error path in GEM obj creation before msm_gem_new_handle()
updates obj->resv to point to the gpuvm resv object, then obj->resv
still points to &obj->_resv. In this case we don't want to decrement
the refcount of the object being freed (since the refcnt is already
zero). This fixes the following splat:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 9 PID: 7013 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148
Modules linked in: uinput snd_seq_dummy snd_hrtimer aes_ce_ccm snd_soc_wsa884x regmap_sdw q6prm_clocks q6apm_lpass_da>
qcom_pil_info i2c_hid drm_kms_helper qcom_common qcom_q6v5 phy_snps_eusb2 qcom_geni_serial drm qcom_sysmon pinctrl_s>
CPU: 9 UID: 1000 PID: 7013 Comm: deqp-vk Not tainted 6.16.0-rc4-debug+ #25 PREEMPT(voluntary)
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN53WW 08/02/2024
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : refcount_warn_saturate+0xf4/0x148
lr : refcount_warn_saturate+0xf4/0x148
sp : ffff8000a2073920
x29: ffff8000a2073920 x28: 0000000000000010 x27: 0000000000000010
x26: 0000000000000042 x25: ffff000810e09800 x24: 0000000000000010
x23: ffff8000a2073b94 x22: ffff000ddb22de00 x21: ffff000ddb22dc00
x20: ffff000ddb22ddf8 x19: ffff0008024934e0 x18: 000000000000000a
x17: 0000000000000000 x16: ffff9f8c67d77340 x15: 0000000000000000
x14: 00000000ffffffff x13: 2e656572662d7265 x12: 7466612d65737520
x11: 3b776f6c66726564 x10: 00000000ffff7fff x9 : ffff9f8c67506c70
x8 : ffff9f8c69fa26f0 x7 : 00000000000bffe8 x6 : c0000000ffff7fff
x5 : ffff000f53e14548 x4 : ffff6082ea2b2000 x3 : ffff0008b86ab080
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008b86ab080
Call trace:
refcount_warn_saturate+0xf4/0x148 (P)
msm_gem_free_object+0x248/0x260 [msm]
drm_gem_object_free+0x24/0x40 [drm]
msm_gem_new+0x1c4/0x1e0 [msm]
msm_gem_new_handle+0x3c/0x1a0 [msm]
msm_ioctl_gem_new+0x38/0x70 [msm]
drm_ioctl_kernel+0xc8/0x138 [drm]
drm_ioctl+0x2c8/0x618 [drm]
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x64/0xe8
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x54/0x1d8
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x19c/0x1a0
irq event stamp: 3698694
hardirqs last enabled at (3698693): [<ffff9f8c675021dc>] __up_console_sem+0x74/0x90
hardirqs last disabled at (3698694): [<ffff9f8c68ce8164>] el1_dbg+0x24/0x90
softirqs last enabled at (3697578): [<ffff9f8c6744ec5c>] handle_softirqs+0x454/0x4b0
softirqs last disabled at (3697567): [<ffff9f8c67360244>] __do_softirq+0x1c/0x28
---[ end trace 0000000000000000 ]---
Fixes:
|
||
Maíra Canal
|
25654a1756 |
drm/msm: Update global fault counter when faulty process has already ended
The global fault counter is no longer used since commit |
||
|
Rob Clark
|
f4ca529de2 |
drm/msm: Fix pagetables setup/teardown serialization
An atomic counter is not sufficient, as one task could still be in the process of tearing things down while another task increments the counter back up to one and begins setup again. The race condition existed since commit |