dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
About Intel Keem Bay:
-------------------
Intel Keem Bay is a computer vision AI accelerator SoC based on ARM CPU.
Documentation of Keem Bay: Documentation/vpu/vpu-stack-overview.rst.
Pinctrl IP:
----------
The SoC has a customised pinmux controller IP which controls pin
multiplexing and configuration.
Keem Bay pinctrl IP is not based on and have nothing in common with the
existing pinctrl drivers. The registers used are incompatible with the
existing drivers, so it requires a new driver.
Add pinctrl driver to enable pin control support in the Intel Keem Bay SoC.
Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210806142527.29113-3-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
* Fix the software mapping of GPIOs on Intel Tiger Lake-H
The following is an automated git shortlog grouped by driver:
tigerlake:
- Fix GPIO mapping for newer version of software
-----BEGIN PGP SIGNATURE-----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=xU7N
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.14-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.14-2
* Fix the software mapping of GPIOs on Intel Tiger Lake-H
The following is an automated git shortlog grouped by driver:
tigerlake:
- Fix GPIO mapping for newer version of software
It's not necessary to unregister pin controller device registered
with devm_pinctrl_register() and using pinctrl_unregister() leads
to a double free.
Fixes: fa99e70138 ("pinctrl: zynqmp: some code cleanups")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210729071905.3235953-1-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the
Dithering BPC, with valid values of 6, 8, 10 BPC.
For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid
values of: 6, 8, 10, 12 BPC, and need to be programmed whether
dithering is enabled or not.
This patch:
-corrects the bits 5-7 for PIPE MISC register for 12 BPC.
-renames the bits and mask to have generic names for these bits for
dithering bpc and port output bpc.
v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout
for pipe_bpp. (Uma Shankar)
v2: Added 'display' to the subject and fixes tag. (Uma Shankar)
Fixes: 756f85cffe ("drm/i915/bdw: Broadwell has PIPEMISC")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811051857.109723-1-ankit.k.nautiyal@intel.com
In k210_fpioa_probe(), add missing calls to clk_disable_unprepare() in
case of error after cenabling the clk and pclk clocks. Also add missing
error handling when enabling pclk.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d4c34d09ab ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210806004311.52859-1-damien.lemoal@wdc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Platform data is a legacy interface to supply device properties
to the driver. In this case we don't have anymore in-kernel users
for it. Just remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
The driver can provide a software node group instead of
passing legacy platform data. This will allow to drop
the legacy platform data structures along with unifying
a child device driver to use same interface for all
property providers, i.e. Device Tree, ACPI, and board files.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
For backward compatibility with some legacy devices introduce
a new (*) property gpio-base to read GPIO base. This will allow
further cleaning up of the driver.
*) Note, it's not new for the GPIO library since the mockup driver
is using it already.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Shared IRQ is only enabled for ACPI enumeration, there is no need
to have a special flag for that, since we simple can test if device
has been enumerated by ACPI. This unifies the checks in dwapb_get_irq()
and dwapb_configure_irqs().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
struct acpi_device is repeated in two branches of ifdeffery.
Move it out and hence deduplicate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fix the following warnings:
kernel/smp.c:1189: warning: cannot understand function prototype: 'struct smp_call_on_cpu_struct '
kernel/smp.c:788: warning: No description found for return value of 'smp_call_function_single_async'
kernel/smp.c:990: warning: Function parameter or member 'wait' not described in 'smp_call_function_many'
kernel/smp.c:990: warning: Excess function parameter 'flags' description in 'smp_call_function_many'
kernel/smp.c:1198: warning: Function parameter or member 'work' not described in 'smp_call_on_cpu_struct'
kernel/smp.c:1198: warning: Function parameter or member 'done' not described in 'smp_call_on_cpu_struct'
kernel/smp.c:1198: warning: Function parameter or member 'func' not described in 'smp_call_on_cpu_struct'
kernel/smp.c:1198: warning: Function parameter or member 'data' not described in 'smp_call_on_cpu_struct'
kernel/smp.c:1198: warning: Function parameter or member 'ret' not described in 'smp_call_on_cpu_struct'
kernel/smp.c:1198: warning: Function parameter or member 'cpu' not described in 'smp_call_on_cpu_struct'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210810225051.3938-1-rdunlap@infradead.org
Add a perf test to test the dlfilter C API.
A perf.data file is synthesized and then processed by perf script with a
dlfilter named dlfilter-test-api-v0.so. Also a C file is compiled to
provide a dso to match the synthesized perf.data file.
Committer testing:
[root@five ~]# perf test dlfilter
72: dlfilter C API : Ok
[root@five ~]# perf test -v dlfilter
72: dlfilter C API :
--- start ---
test child forked, pid 3387712
Checking for gcc
Command: gcc --version
gcc (GCC) 11.1.1 20210531 (Red Hat 11.1.1-3)
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
dlfilters path: /var/home/acme/libexec/perf-core/dlfilters
Command: gcc -g -o /tmp/dlfilter-test-3387712-prog /tmp/dlfilter-test-3387712-prog.c
Creating new host machine structure
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 0 --dlarg last
start API
filter_event_early API
filter_event API
stop API
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 1 --dlarg last
start API
filter_event_early API
filter_event API
stop API
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 2 --dlarg last
start API
filter_event_early API
stop API
test child finished with 0
---- end ----
dlfilter C API: Ok
[root@five ~]#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_dlfilters.h in the source tree so that it will be found when
building dlfilters as part of the perf build.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nikolay Aleksandrov says:
====================
net: bridge: vlan: add global mcast options
This is the first follow-up set after the support for per-vlan multicast
contexts which extends global vlan options to support bridge's multicast
config per-vlan, it enables user-space to change and dump the already
existing bridge vlan multicast context options. The global option patches
(01 - 09 and 12-13) follow a similar pattern of changing current mcast
functions to take multicast context instead of a port/bridge directly.
Option equality checks have been added for dumping vlan range compression.
The last 2 patches extend the mcast router dump support so it can be
re-used when dumping vlan config.
patches 01 - 09: add support for various mcast options
patches 10 - 11: prepare for per-vlan querier control
patches 12 - 13: add support for querier control and router control
patches 14 - 15: add support for dumping per-vlan router ports
Next patch-sets:
- per-port/vlan router option config
- iproute2 support for all new vlan options
- selftests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Embed the standard multicast router port export by br_rports_fill_info()
into a new global vlan attribute BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS.
In order to have the same format for the global bridge mcast context and
the per-vlan mcast context we need a double-nesting:
- BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS
- MDBA_ROUTER
Currently we don't compare router lists, if any router port exists in
the bridge mcast contexts we consider their option sets as different and
export them separately.
In addition we export the router port vlan id when dumping similar to
the router port notification format.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we are dumping the router ports of a vlan mcast context we need to
use the bridge/vlan and port/vlan's multicast contexts to check if
IPv4/IPv6 router port is present and later to dump the vlan id.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast router state
which is used for the bridge itself. We just need to pass multicast context
to br_multicast_set_router instead of bridge device and the rest of the
logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast querier state.
We just need to pass multicast context to br_multicast_set_querier
instead of bridge device and the rest of the logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is a minor optimization and better behaviour to make sure querier and
query sending routines affect only the matching multicast context
depending if vlan snooping is enabled (vlan ctx vs bridge ctx).
It also avoids sending unnecessary extra query packets.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to have the querier state per multicast context in order to have
per-vlan control, so remove the internal option bit and move it to the
multicast context. Also annotate the lockless reads of the new variable.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast startup query
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast query response
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast query interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast querier interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast membership
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast last member
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast startup query
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan multicast last member
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to change and retrieve global vlan IGMP/MLD versions.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like all locally-built programs, dlfilters may need to be re-built if
shared libraries they use change. Also there may be unexpected results
if the dfilter uses different versions of the shared libraries that perf
uses.
Note those things in the documentation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option --list-dlfilters does use a string value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 638e2b9984 ("perf script Add option to list dlfilters")
Link: https //lore.kernel.org/r/20210811101036.17986-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
machine_resolve() may have already been called. Test for that to avoid
calling it again unnecessarily.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix all kernel-doc warnings in these 3 files and do some simple editing
(capitalize acronyms, capitalize Linux).
kernel/irq/pm.c:235: warning: expecting prototype for irq_pm_syscore_ops(). Prototype was for irq_pm_syscore_resume() instead
kernel/irq/msi.c:530: warning: expecting prototype for __msi_domain_free_irqs(). Prototype was for msi_domain_free_irqs() instead
kernel/irq/msi.c:31: warning: No description found for return value of 'alloc_msi_entry'
kernel/irq/msi.c:103: warning: No description found for return value of 'msi_domain_set_affinity'
kernel/irq/msi.c:288: warning: No description found for return value of 'msi_create_irq_domain'
kernel/irq/msi.c:499: warning: No description found for return value of 'msi_domain_alloc_irqs'
kernel/irq/msi.c:545: warning: No description found for return value of 'msi_get_domain_info'
kernel/irq/ipi.c:264: warning: expecting prototype for ipi_send_mask(). Prototype was for __ipi_send_mask() instead
kernel/irq/ipi.c:25: warning: No description found for return value of 'irq_reserve_ipi'
kernel/irq/ipi.c:116: warning: No description found for return value of 'irq_destroy_ipi'
kernel/irq/ipi.c:163: warning: No description found for return value of 'ipi_get_hwirq'
kernel/irq/ipi.c:222: warning: No description found for return value of '__ipi_send_single'
kernel/irq/ipi.c:308: warning: No description found for return value of 'ipi_send_single'
kernel/irq/ipi.c:329: warning: No description found for return value of 'ipi_send_mask'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210810234835.12547-1-rdunlap@infradead.org
Return a negative error code from the error handling case instead of 0, as
done elsewhere in this function.
Fixes: f52da98d90 ("genirq/timings: Add selftest for irqs circular buffer")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210811093333.2376-1-thunder.leizhen@huawei.com
perf_dlfilter_fns must not be const, because it is not.
Declaring it const can result in it being mapped read-only, causing a
segfaullt when it is written. Update documentation accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 8defa7147d5572 ("perf script Add API for filtering via dynamically loaded shared object")
Link: https //lore.kernel.org/r/20210811101036.17986-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alex Elder says:
====================
net: ipa: use runtime PM reference counting
This series does further rework of the IPA clock code so that we
rely on some of the core runtime power management code (including
its referencing counting) instead.
The first patch makes ipa_clock_get() act like pm_runtime_get_sync().
The second patch makes system suspend occur regardless of the
current reference count value, which is again more like how the
runtime PM core code behaves.
The third patch creates functions to encapsulate all hardware
suspend and resume activity. The fourth uses those functions as
the ->runtime_suspend and ->runtime_resume power callbacks. With
that in place, ipa_clock_get() and ipa_clock_put() are changed to
use runtime PM get and put functions when needed.
The fifth patch eliminates an extra clock reference previously used
to control system suspend. The sixth eliminates the "IPA clock"
reference count and mutex.
The final patch replaces the one call to ipa_clock_get_additional()
with a call to pm_runtime_get_if_active(), making the former
unnecessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that ipa_clock_get_additional() is a trivial wrapper around
pm_runtime_get_if_active(), just open-code it in its only caller
and delete the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The runtime power management core code maintains a usage count. This
count mirrors the IPA clock reference count, and there's no need to
maintain both. So get rid of the IPA clock reference count and just
rely on the runtime PM usage count to determine when the hardware
should be suspended or resumed.
Use pm_runtime_get_if_active() in ipa_clock_get_additional(). We
care whether power is active, regardless of whether it's in use, so
pass true for its ign_usage_count argument.
The IPA clock mutex is just used to make enabling/disabling the
clock and updating the reference count occur atomically. Without
the reference count, there's no need for the mutex, so get rid of
that too.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suspending the IPA hardware is now managed by the runtime PM core
code. The ->runtime_idle callback returns a non-zero value, so it
will never suspend except when forced. As a result, there's no need
to take an extra "do not suspend" clock reference.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the runtime power management core to cause hardware suspend and
resume to occur. Enable it in ipa_clock_init() (without autosuspend),
and disable it in ipa_clock_exit().
Use ipa_runtime_suspend() as the ->runtime_suspend power operation,
and arrange for it to be called by having ipa_clock_get() call
pm_runtime_get_sync() when the first clock reference is taken.
Similarly, use ipa_runtime_resume() as the ->runtime_resume power
operation, and pm_runtime_put() when the last IPA clock reference
is dropped.
Introduce ipa_runtime_idle() as the ->runtime_idle power operation,
and have it return a non-zero value; this way suspend will never
occur except when forced.
Use pm_runtime_force_suspend() and pm_runtime_force_resume() as the
system suspend and resume callbacks, and remove ipa_suspend() and
ipa_resume().
Store a pointer to the device structure passed to ipa_clock_init(),
so it can be used by ipa_clock_exit() to disable runtime power
management.
For now we preserve IPA clock reference counting.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce ipa_runtime_suspend() and ipa_runtime_resume(), which
encapsulate the activities necessary for suspending and resuming
the IPA hardware. Call these functions from ipa_clock_get() and
ipa_clock_put() when the first reference is taken or last one is
dropped.
When the very first clock reference is taken (for ipa_config()),
setup isn't complete yet, so (as before) only the core clock gets
enabled.
When the last clock reference is dropped (after ipa_deconfig()),
ipa_teardown() will have made the setup_complete flag false, so
there too, the core clock will be stopped without affecting GSI
or the endpoints.
Otherwise these new functions will perform the desired suspend and
resume actions once setup is complete.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Disable the IPA clock rather than dropping a reference to it in the
system suspend callback. This forces the suspend to occur without
affecting existing references.
Similarly, enable the clock rather than taking a reference in
ipa_resume(), forcing a resume without changing the reference count.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently assume no errors occur when enabling or disabling the
IPA core clock and interconnects. And although this commit exposes
errors that could occur, we generally assume this won't happen in
practice.
This commit changes ipa_clock_get() and ipa_clock_put() so each
returns a value. The values returned are meant to mimic what the
runtime power management functions return, so we can set up error
handling here before we make the switch. Have ipa_clock_get()
increment the reference count even if it returns an error, to match
the behavior of pm_runtime_get().
More details follow.
When taking a reference in ipa_clock_get(), return 0 for the first
reference, 1 for subsequent references, or a negative error code if
an error occurs. Note that if ipa_clock_get() returns an error, we
must not touch hardware; in some cases such errors now cause entire
blocks of code to be skipped.
When dropping a reference in ipa_clock_put(), we return 0 or an
error code. The error would come from ipa_clock_disable(), which
now returns what ipa_interconnect_disable() returns (either 0 or a
negative error code). For now, callers ignore the return value;
if an error occurs, a message will have already been logged, and
little more can actually be done to improve the situation.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the interrupts property as we no longer specify it.
Signed-off-by: satya priya <skakit@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1627910464-19363-4-git-send-email-skakit@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a simple check in the inline helpers to avoid calling fsnotify()
and __fsnotify_parent() in case there are no marks of any type
(inode/sb/mount) for an inode's sb, so there can be no objects
of any type interested in the event.
Link: https://lore.kernel.org/r/20210810151220.285179-5-amir73il@gmail.com
Reviewed-by: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
For memblock_cap_memory_range() to work properly, it should be called
after memory is detected and added to memblock with memblock_add() or
memblock_add_node(). If memblock_cap_memory_range() would be called
before memory is registered, we may silently corrupt memory later
because the crash kernel will see all memory as available.
Print a warning and bail out if ordering is not satisfied.
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/aabc5bad008d49f07d542815c6c8d28ec90bb09e.1628672091.git.geert+renesas@glider.be