Packet extraction failures over register-based MMIO are silent, and
difficult to pinpoint. Add an error message to remedy this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Automated tools complain that felix_check_xtr_pkt() has logic to drain
the CPU queue on the reception of a PTP packet over Ethernet, yet it
returns an uninitialized error code in the case where the CPU queue was
empty.
This is not likely to happen (/possible if hardware works correctly),
but it isn't a fatal condition either. The PTP packet will be dequeued
from the CPU queue when the next PTP packet arrives. So initialize "err"
to 0 for the case where nothing was dequeued during this iteration.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA ->port_rxtstamp() function is never called for PTP_CLASS_NONE:
dsa_skb_defer_rx_timestamp:
if (type == PTP_CLASS_NONE)
return false;
if (likely(ds->ops->port_rxtstamp))
return ds->ops->port_rxtstamp(ds, p->dp->index, skb, type);
So practically, the argument is unused, so remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This assignment is redundant, since ocelot->npi has already been set to
-1 by felix_npi_port_deinit(). Call path:
felix_change_tag_protocol
-> felix_del_tag_protocol(DSA_TAG_PROTO_OCELOT)
-> felix_teardown_tag_npi
-> felix_npi_port_deinit
-> felix_set_tag_protocol(DSA_TAG_PROTO_OCELOT_8021Q)
-> felix_setup_tag_8021q
-> felix_8021q_cpu_port_init
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardcoding these IP protocol numbers in is2_entry_set() obscures the
purpose of the code, so replace the magic numbers with the definitions
from linux/in.h.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify ocelot_vcap_block_remove_filter by using list_for_each_entry
instead of list_for_each.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are different software reset registers for difference MTK SoCs.
Therefore, we add a new variable "sw0_rst_offset" to control it.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220217082626.15728-2-rex-bc.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
IBM manufactures a PL2303 device for UPS communications. Add the vendor
and product IDs so that the PL2303 driver binds to the device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com
Cc: stable@vger.kernel.org
[ johan: amend the SoB chain ]
Signed-off-by: Johan Hovold <johan@kernel.org>
vmalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check the return
of it to catch the error in time.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4221FC4089F6DF01C48F192E5784038BA205@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable bytes is being assigned a value that is never read, it
is being re-assigned inside a following if block. The assignment is
redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/echoaudio/midi.c:211:9: warning: Although the value stored
to 'bytes' is used in the enclosing expression, the value is never
actually read from 'bytes' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220302170728.1094633-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the downstream kernels for exynos4 and exynos5 devices, there is an
undocumented register that controls the order of the RGB output. It can
be set to either normal order or reversed, which enables BGR support for
those SoCs.
This patch enables the BGR support for all the SoCs that were found to
have at least one device with this logic in the corresponding downstream
kernels.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
TE-gpio, if defined, is placed in the panel's node, not the parent DSI
node. Change the devm_gpiod_get_optional() to gpiod_get_optional() and
pass proper device node to it. The code already has a proper cleanup
path, so it looks that the devm_* variant has been applied accidentally
during the conversion to gpiod API.
Fixes: ee6c8b5afa ("drm/exynos: Replace legacy gpio interface for gpiod interface")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed a typo.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
TE-gpio is optional and if it is not found then gpiod_get_optional()
returns NULL. In such case the code will continue and try to convert NULL
gpiod to irq what in turn fails. The failure is then propagated and driver
is not registered.
Fix this by returning early from exynos_dsi_register_te_irq() if no
TE-gpio is found.
Fixes: ee6c8b5afa ("drm/exynos: Replace legacy gpio interface for gpiod interface")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Document RZ/V2L RPC-IF bindings. RZ/V2L RPC-IF is identical to one found
on the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-rpc-if" will be used as a fallback.
While at it, drop the comment "# RZ/G2L family" for "renesas,rzg2l-rpc-if"
compatible string as this will avoid changing the line for every new SoC
addition.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220301123527.15950-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The pointer temp is allocated by devm_kzalloc(), so it should be
checked for error handling.
Fixes: 7ec944538d ("memory: emif: add basic infrastructure for EMIF driver")
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225132552.27894-1-baijiaju1990@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
setup_interrupts() and return error if fails.
Fixes: 68b4aee35d ("memory: emif: add interrupt and temperature handling")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220224025444.3256530-1-jiasheng@iscas.ac.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The ov8865's datasheet gives the pixel array as 3296x2528, and the
active portion as the centre 3264x2448. This makes for a top offset
of 40 and a left offset of 16, not 32 and 80.
Fixes: acd25e2209 ("media: i2c: Add .get_selection() support to ov8865")
Reported-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
This driver is using two GPIO numbers passed as platform data.
No board file in the kernel defines this however, so we can
just change the mechanism without side effects.
Let's just switch it to use GPIO descriptors and add some
comments on how to provide these.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The Fujitsu M5MOLS sensor driver is using a reset GPIO number
passed from platform data.
No machine/board descriptor file in the kernel is using this so
let's replace it with a GPIO descriptor.
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Heungjun Kim <riverful.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The noon010pc30 sensor driver is using legacy gpio numbers passed
through platform data and open coding reverse polarity on the
GPIOs used for reset and standby.
Nothing in the kernel defines any platform data for this driver
so we can just convert the driver to use GPIO descriptors and
requires that these specify the correct polarity instead.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
This driver includes <linux/gpio.h> but does not use any
symbols from this file. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The adv7511 driver includes the legacy GPIO header <linux/gpio.h>
yet fails to use any symbols from it.
Drop the include.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stephen reported the following warning messages from smc-sysctl.rst
Documentation/networking/smc-sysctl.rst:3: WARNING: Title overline
too short.
Documentation/networking/smc-sysctl.rst: WARNING: document isn't
included in any toctree
Fix the title overline and add smc-sysctl entry into
Documentation/networking/index.rst
Fixes: 12bbb0d163 ("net/smc: add sysctl for autocorking")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220303113527.62047-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're experimenting a bit with the process this time, with Dmitry
collecting display patches and merging them into msm-next with me
handling the gpu/etc side of things. Summary of interesting new bits
and pieces
* dpu + dp support for sc8180x
* dp support for sm8350
* dpu + dsi support for qcm2290
* 10nm dsi phy tuning support
* bridge support for dp encoder
* gpu support for additional 7c3 SKUs
* assorted cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com
- Fix regression with processing of MGMT commands
- Fix unbalanced unlock in Set Device Flags
-----BEGIN PGP SIGNATURE-----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=Awzt
-----END PGP SIGNATURE-----
Merge tag 'for-net-2022-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression with processing of MGMT commands
- Fix unbalanced unlock in Set Device Flags
* tag 'for-net-2022-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Fix not processing all entries on cmd_sync_work
Bluetooth: hci_core: Fix unbalanced unlock in set_device_flags()
====================
Link: https://lore.kernel.org/r/20220303210743.314679-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-subsystem Changes:
- drm-next backmerge for buddy allocator changes
Driver Changes:
- Skip i915_perf init for DG2 as it is not yet enabled (Ram)
- Add missing workarounds for DG2 (Clint)
- Add 64K page/align support for platforms like DG2 that require it (Matt A, Ram, Bob)
- Add accelerated migration support for DG2 (Matt A)
- Add flat CCS support for XeHP SDV (Abdiel, Ram)
- Add Compute Command Streamer (CCS) engine support for XeHP SDV (Michel,
Daniele, Aravind, Matt R)
- Don't support parallel submission on compute / render (Matt B, Matt R)
- Disable i915 build on PREEMPT_RT until RT behaviour fixed (Sebastian)
- Remove RPS interrupt support for TGL+ (Jose)
- Fix S/R with PM_EARLY for non-GTT mappable objects on DG2 (Matt, Lucas)
- Skip stolen memory init if it is fully reserved (Jose)
- Use iosys_map for GuC data structures that may be in LMEM BAR or SMEM (Lucas)
- Do not complain about stale GuC reset notifications for banned contexts (John)
- Move context descriptor fields to intel_lrc.h
- Start adding support for small BAR (Matt A)
- Clarify vma lifetime (Thomas)
- Simplify subplatform detection on TGL (Jose)
- Correct the param count for unset GuC SLPC param (Vinay, Umesh)
- Read RP_STATE_CAP correctly on Gen12 with GuC SLPC (Vinay)
- Initialize GuC submission locks and queues early (Daniele)
- Fix GuC flag query helper function to not modify state (John)
- Drop fake lmem support now we have real hardware available (Lucas)
- Move misplaced W/A to their correct locations (Srinivasan)
- Use get_reset_domain() helper (Tejas)
- Move context descriptor fields to intel_lrc.h (Matt R)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YiBzY1dM7bKwMQ3H@jlahtine-mobl.ger.corp.intel.com
Commit 67d96729a9 ("riscv: Update Canaan Kendryte K210 device tree")
incorrectly removed two entries from the PLIC interrupt-controller node's
interrupts-extended property.
The PLIC driver cannot know the mapping between hart contexts and hart ids,
so this information has to be provided by device tree, as specified by the
PLIC device tree binding.
The PLIC driver uses the interrupts-extended property, and initializes the
hart context registers in the exact same order as provided by the
interrupts-extended property.
In other words, if we don't specify the S-mode interrupts, the PLIC driver
will simply initialize the hart0 S-mode hart context with the hart1 M-mode
configuration. It is therefore essential to specify the S-mode IRQs even
though the system itself will only ever be running in M-mode.
Re-add the S-mode interrupts, so that we get working IRQs on hart1 again.
Cc: <stable@vger.kernel.org>
Fixes: 67d96729a9 ("riscv: Update Canaan Kendryte K210 device tree")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
-----BEGIN PGP SIGNATURE-----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=TVQP
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
This contains a couple more minor fixes that didn't seem urgent enough
for v5.17. On top of that this improves YUV format support on older
chips.
-----BEGIN PGP SIGNATURE-----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=gvtK
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.18-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v5.18-rc1
This contains a couple more minor fixes that didn't seem urgent enough
for v5.17. On top of that this improves YUV format support on older
chips.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301124426.1207653-1-thierry.reding@gmail.com
This patch adds a new key definition for KEY_ALL_APPLICATIONS
and aliases KEY_DASHBOARD to it.
It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS.
Signed-off-by: William Mahon <wmahon@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Numerous keyboards are adding dictate keys which allows for text
messages to be dictated by a microphone.
This patch adds a new key definition KEY_DICTATE and maps 0x0c/0x0d8
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: William Mahon <wmahon@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303021501.1.I5dbf50eb1a7a6734ee727bda4a8573358c6d3ec0@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In sv48, the kasan inner regions are not aligned on PGDIR_SIZE and then
when we populate the kasan linear mapping region, we clear the kasan
vmalloc region which is in the same PGD.
Fix this by copying the content of the kasan early pud after allocating a
new PGD for the first time.
Fixes: e8a62cc26d ("riscv: Implement sv48 support")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
high_memory used to be initialized in mem_init, way after setup_bootmem.
But a call to dma_contiguous_reserve in this function gives rise to the
below warning because high_memory is equal to 0 and is used at the very
beginning at cma_declare_contiguous_nid.
It went unnoticed since the move of the kasan region redefined
KERN_VIRT_SIZE so that it does not encompass -1 anymore.
Fix this by initializing high_memory in setup_bootmem.
------------[ cut here ]------------
virt_to_phys used for non-linear address: ffffffffffffffff (0xffffffffffffffff)
WARNING: CPU: 0 PID: 0 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xac/0x1b8
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.17.0-rc1-00007-ga68b89289e26 #27
Hardware name: riscv-virtio,qemu (DT)
epc : __virt_to_phys+0xac/0x1b8
ra : __virt_to_phys+0xac/0x1b8
epc : ffffffff80014922 ra : ffffffff80014922 sp : ffffffff84a03c30
gp : ffffffff85866c80 tp : ffffffff84a3f180 t0 : ffffffff86bce657
t1 : fffffffef09406e8 t2 : 0000000000000000 s0 : ffffffff84a03c70
s1 : ffffffffffffffff a0 : 000000000000004f a1 : 00000000000f0000
a2 : 0000000000000002 a3 : ffffffff8011f408 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffff84a03747
s2 : ffffffd800000000 s3 : ffffffff86ef4000 s4 : ffffffff8467f828
s5 : fffffff800000000 s6 : 8000000000006800 s7 : 0000000000000000
s8 : 0000000480000000 s9 : 0000000080038ea0 s10: 0000000000000000
s11: ffffffffffffffff t3 : ffffffff84a035c0 t4 : fffffffef09406e8
t5 : fffffffef09406e9 t6 : ffffffff84a03758
status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff8322ef4c>] cma_declare_contiguous_nid+0xf2/0x64a
[<ffffffff83212a58>] dma_contiguous_reserve_area+0x46/0xb4
[<ffffffff83212c3a>] dma_contiguous_reserve+0x174/0x18e
[<ffffffff83208fc2>] paging_init+0x12c/0x35e
[<ffffffff83206bd2>] setup_arch+0x120/0x74e
[<ffffffff83201416>] start_kernel+0xce/0x68c
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<0000000000000000>] 0x0
softirqs last enabled at (0): [<0000000000000000>] 0x0
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000 ]---
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
__virt_to_phys function is called very early in the boot process (ie
kasan_early_init) so it should not be instrumented by KASAN otherwise it
bugs.
Fix this by declaring phys_addr.c as non-kasan instrumentable.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: 8ad8b72721 (riscv: Add KASAN support)
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
KERN_VIRT_SIZE used to encompass the kernel mapping before it was
redefined when moving the kasan mapping next to the kernel mapping to only
match the maximum amount of physical memory.
Then, kernel mapping addresses that go through __virt_to_phys are now
declared as wrong which is not true, one can use __virt_to_phys on such
addresses.
Fix this by redefining the condition that matches wrong addresses.
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder.
This chip supports 1/2/4 analog video inputs and converts them into
1/2/4 VCs in MIPI CSI2 stream.
This driver currently supports ISL79987 and both 720x480 and 720x576
resolutions, however as per specification, all inputs must use the
same resolution and standard. The only supported pixel format is now
YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but
this is currently unsupported.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
To: linux-media@vger.kernel.org
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add bindings for the Intersil ISL79987 analog to MIPI CSI-2 decoder.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
To: linux-media@vger.kernel.org
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
