Due to preg protection we cannot write to this register
while FW is running (when FW in Halt it is ok).
since we have some cases that we need to dump this
region while FW is running remove this writing from DRV.
FW will do this writing.
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Fixes: 89639e06d0 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.209f3078bc74.I463530bd2f40daedb39f6d9df987bb7cee209033@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Since commit a05829a722 ("cfg80211: avoid holding the RTNL when
calling the driver") we're not only holding the RTNL when going
in and out of suspend, but also the wiphy->mtx. Add that to the
D3 test debugfs in iwlwifi since it's required for various calls
to mac80211.
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.fcec0204e162.Ib73bf787ab4d83581de20eb89b1f8dbfcaaad0e3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We may not have all the interfaces added to the driver when we get the
THERMAL_DUAL_CHAIN_REQUEST notification from the FW, so instead of
iterating all vifs to update SMPS, iterate only the ones that are
already assigned. The interfaces that were not assigned yet, will be
updated accordingly when we start using them.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 2a7ce54ccc ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.9416aade2ba0.I0b71142f89e3f158aa058a1dfb2517c8c1fa3726@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Currently we enable DCM if the peer supports RX without checking whether
we advertised that we support TX. Fix this by also checking that our TX
side is set.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.6865266c8a34.If1de7849f25337bb14ba2f27896e9715ae5975df@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Until now function just got a pointer to some buffer and used it as if
it's good to use with no boundaries about size left in the buffer.
This infra helps for internal functions ops to make sure buffer usage
is in bound of allocation.
We also add external checks with warnings to verify every internal
function didn't exceed usage of the free buffer size.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.25c90fb14968.Ic8f05581a745d08011ca29b3f42767402643e8c5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Due to some rearchitecting inside the firmware, a new BAID
allocation command is being introduced. Support it. Note
that with it the firmware no longer returns "no space" but
will crash instead, so check for that before sending the
command to the firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.a89fa3bd9d91.Ibe58c5d9e882dad43aa857aa1c8f54f3358c667b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Most of this change is a continuation of commit 403ea939ea
("iwlwifi: dbg: Mark ucode tlv data as const") propagating the
(const) type qualifier for ucode based tlv data to avoid having
the impression that it is writeable.
The other part of the change preserves the (const) type qualifier
over casts and function calls where it was previously lost.
Both changes are needed to avoid compile time errors on system with
more strict error settings, in this case found with clang on FreeBSD.
Sponsored by: The FreeBSD Foundation
Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.ORG>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[fix double word in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.3230c41312fc.I0032c597984834258d5a79b97052ed83dbe53b80@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In order to de-const variables simply casting through (void *) is
not enough: "cast from 'const .. *' to 'void *' drops const qualifier".
Cast through (uintptr_t) as well [1] to make this compile on systems
with more strict requirements.
In addition passing const void *data to dma_map_single() also
drops the (const) qualifier. De-constify on variable on assignment
which may be overwritten later. In either case the (void *) cast
to dma_map_single() is not needed (anymore) either.
[1] See __DECONST() in sys/sys/cdefs.h in FreeBSD
Sponsored by: The FreeBSD Foundation
Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.ORG>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.eb696eb56bf6.Ide1dd041f9b908c5154a600286a7453750b0704a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The order of arguments for iwl_cmd_id() is confusing, and the
version is always 0 and thus a useless argument. Prefer the
WIDE_ID() macro (which needs to be a macro due to use in switch
cases etc.) over the iwl_cmd_id() function.
Obviously done with spatch:
@@
expression G, C;
@@
-iwl_cmd_id(C, G, 0)
+WIDE_ID(G, C)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read a new bit defined in ACPI WTAS that allows OEMs to specify whether
TAS is allowed in UHB (6-7GHz) in the USA. This can be used by OEMs
that got certified to use this feature.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.1d2ae1e6bcdb.I177929ed01ed7bf4614ea0f6db2af9e52de13316@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Since FW is now in charge of timing the channel switch, there is no need
to send the add/modify/remove time event command to fw with every (e)CSA
element.
However, the driver needs to cancel the channel switch if the CS start
notification arrives and it does not know about an ongoing channel switch.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153013.ac3af0ff22c7.Ie87c62047b71b93b12aa80b5dc5391b4798dbe97@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The recent fix for NULL sta in iwl_mvm_get_tx_rate() still has a call
of iwl_mvm_sta_from_mac80211() that may be called with NULL sta.
Although this practically only points to the address and the actual
access doesn't happen due to the conditional evaluation at a later
point, it looks a bit flaky.
This patch drops the temporary variable above and evaluates
iwm_mvm_sta_from_mac80211() directly for avoiding confusions.
Fixes: d599f714b7 ("iwlwifi: mvm: don't crash on invalid rate w/o STA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220121114024.10454-1-tiwai@suse.de
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Inspired by commit 3553ae5690 (x86/kvm: Don't use pvqspinlock code if
only 1 vCPU), on a VM with only 1 vCPU, there is no need to enable
pv tlb/ipi/sched_yield and we can save the memory for __pv_cpu_mask.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1645171838-2855-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On non-x86_64 builds, helpers gtod_is_based_on_tsc() and
kvm_guest_supported_xfd() are defined but never used. Because these are
static inline but are in a .c file, some compilers do warn for them with
-Wunused-function, which becomes an error if -Werror is present.
Add #ifdef so they are only defined in x86_64 builds.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20220218034100.115702-1-leobras@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SanCloud BBE Extended WiFi board which shares common
hardware with other BBE varients. Compared to the vanilla BBE, this
particular model:
* adds a WiFi+Bluetooth module connected via SDIO and UART.
* drops the HDMI encoder, barometer and accelerometer.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The baseboard has an ISP1763 USB controller acting as a host.
Since the pinmuxing for the corresponding IRQ is different
between OMAP35 and DM37, the pinmux has been placed in the
kit-level files, while the common code is placed into the
baseboard file.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
RTC devices should be named "rtc" according to the standard RTC device
tree schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Devkit8000 board seems to always used 32k_counter as clocksource.
Restore this behavior.
If clocksource is back to 32k_counter, timer12 is now the clockevent
source (as before) and timer2 is not longer needed here.
This commit fixes the same issue observed with commit 23885389db
("ARM: dts: Fix timer regression for beagleboard revision c") when sleep
is blocked until hitting keys over serial console.
Fixes: aba1ad05da ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Fixes: e428e250fd ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch allow lcd43 and lcd70 flavors to benefit from timer
evolution.
Fixes: e428e250fd ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
No reason the high level intel_update_crtc() needs to know
that there is something magical about the commit order of
planes between different platforms. So let's hide that
detail even better.
In order to keep to somewhat consistent naming between
things we shall call this intel_crtc_planes_update_arm()
to match the plane->update_arm() vfunc naming convention.
And let's rename the noarm counterpart to
intel_crtc_planes_update_noarm() to more clearly associate
it with the plane->update_noarm() vfunc.
v2: Change the naming convention a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-2-ville.syrjala@linux.intel.com
Give names to the SSKPD/MLTR fields, and use the
REG_GENMASK* and REG_FIELD_GET*.
Also drop the bogus non-mirrored SSKP register define.
v2: Rebase due to intel_mchbar_regs.h
Leave gen6_check_mch_setup() in place for the moment
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-3-ville.syrjala@linux.intel.com
The rng_quality sysfs attribute returns the quality setting for the
currently active hw_random device, in entropy bits per 1024 bits of
input. Storing a value between 0 and 1024 to this file updates this
estimate accordingly.
Based on the updates to the quality setting, the rngd kernel thread
may be stopped (if no hw_random device is trusted to return entropy),
may be started (if the quality setting is increased from zero), or
may use a different hw_random source (if that has higher quality
output).
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current_quality variable exposed as a module parameter is
fundamentally broken: If it is set at boot time, it is overwritten once
the first hw rng device is loaded; if it is set at runtime, it is
without effect if the hw rng device had its quality value set to 0 (and
no default_quality was set); and if a new rng is selected, it gets
overwritten. Therefore, mark it as obsolete, and replace it by the
per-rng quality setting.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extract the start/stop logic for the in-kernel rngd thread to
a separate function.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no real reason why this list needs to be kept ordered by
the driver-provided quality value -- a value which is set only by
a handful of hw_random devices anyway.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is not need to enable sm4 extra mode in at HW V3. Here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added the register configuration of the SVA mode for HW V3.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Platform_driver probe functions aren't called with locks held
and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only usage of these is to pass their address to
sysfs_{create,remove}_group(), which takes pointers to const struct
attribute_group. Make them const to allow the compiler to put them in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only usage of omap_sham_attr_group is to pass its address to
sysfs_{create,remove}_group(), which takes pointers to const struct
attribute_group. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only usage of omap_aes_attr_group is to pass its address to
sysfs_{create,remove}_group(), which takes pointers to const struct
attribute_group. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for HW QAT Power Management (PM) feature.
This feature is enabled at init time (1) by sending an admin message to
the firmware, targeting the admin AE, that sets the idle time before
the device changes state and (2) by unmasking the PM source of interrupt
in ERRMSK2.
The interrupt handler is extended to handle a PM interrupt which
is triggered by HW when a PM transition occurs. In this case, the
driver responds acknowledging the transaction using the HOST_MSG
mailbox.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Co-developed-by: Marcinx Malinowski <marcinx.malinowski@intel.com>
Signed-off-by: Marcinx Malinowski <marcinx.malinowski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move error source related CSRs from 4xxx to the wider GEN4 header file.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In an effort to reduce the amount of workqueues, scattered across
the QAT driver, introduce the misc workqueue. This queue will be used
to handle bottom halves, Power Management and more in the future.
The function adf_misc_wq_queue_work() has been added to simplify
the enqueuing of jobs.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
