During controller reset, the driver tries to flush all the pending firmware
event works from worker queue that are queued prior to the reset. However,
if any work is waiting for device addition/removal operation to be
completed at the SML, then a deadlock is observed. This is due to the
controller reset waiting for the device addition/removal to be completed
and the device/addition removal is waiting for the controller reset to be
completed.
To limit this deadlock, continue with the controller reset handling without
canceling the work which is waiting for device addition/removal operation
to complete at SML.
Link: https://lore.kernel.org/r/20220210095817.22828-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We cannot do the cancel_work_sync from after the unregister_netdev, as
the dev pointer is no longer valid, causing a uaf on ldisc unregister
(or device close).
Instead, do the cancel_work_sync from the ndo_uninit op, where the dev
still exists, but the queue has stopped.
Fixes: 7bd9890f3d ("mctp: serial: cancel tx work on ldisc close")
Reported-by: Luo Likang <luolikang@nsfocus.com>
Tested-by: Luo Likang <luolikang@nsfocus.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20220211011552.1861886-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Platform_driver probe functions aren't called with locks
held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220210204223.104181-1-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 8a99b6833c ("sched: Move SCHED_DEBUG sysctl to
debugfs"), some NUMA balancing sysctls enclosed with SCHED_DEBUG has
been moved to debugfs. This patch move the document for these
sysctls from
Documentation/admin-guide/sysctl/kernel.rst
to
Documentation/scheduler/sched-debug.rst
to make the document consistent with the code.
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20220210052514.3038279-1-ying.huang@intel.com
Commit 7d2b5dd0bc ("sched/numa: Allow a floating imbalance between NUMA
nodes") allowed an imbalance between NUMA nodes such that communicating
tasks would not be pulled apart by the load balancer. This works fine when
there is a 1:1 relationship between LLC and node but can be suboptimal
for multiple LLCs if independent tasks prematurely use CPUs sharing cache.
Zen* has multiple LLCs per node with local memory channels and due to
the allowed imbalance, it's far harder to tune some workloads to run
optimally than it is on hardware that has 1 LLC per node. This patch
allows an imbalance to exist up to the point where LLCs should be balanced
between nodes.
On a Zen3 machine running STREAM parallelised with OMP to have on instance
per LLC the results and without binding, the results are
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v6
MB/sec copy-16 162596.94 ( 0.00%) 580559.74 ( 257.05%)
MB/sec scale-16 136901.28 ( 0.00%) 374450.52 ( 173.52%)
MB/sec add-16 157300.70 ( 0.00%) 564113.76 ( 258.62%)
MB/sec triad-16 151446.88 ( 0.00%) 564304.24 ( 272.61%)
STREAM can use directives to force the spread if the OpenMP is new
enough but that doesn't help if an application uses threads and
it's not known in advance how many threads will be created.
Coremark is a CPU and cache intensive benchmark parallelised with
threads. When running with 1 thread per core, the vanilla kernel
allows threads to contend on cache. With the patch;
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v5
Min Score-16 368239.36 ( 0.00%) 389816.06 ( 5.86%)
Hmean Score-16 388607.33 ( 0.00%) 427877.08 * 10.11%*
Max Score-16 408945.69 ( 0.00%) 481022.17 ( 17.62%)
Stddev Score-16 15247.04 ( 0.00%) 24966.82 ( -63.75%)
CoeffVar Score-16 3.92 ( 0.00%) 5.82 ( -48.48%)
It can also make a big difference for semi-realistic workloads
like specjbb which can execute arbitrary numbers of threads without
advance knowledge of how they should be placed. Even in cases where
the average performance is neutral, the results are more stable.
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v6
Hmean tput-1 71631.55 ( 0.00%) 73065.57 ( 2.00%)
Hmean tput-8 582758.78 ( 0.00%) 556777.23 ( -4.46%)
Hmean tput-16 1020372.75 ( 0.00%) 1009995.26 ( -1.02%)
Hmean tput-24 1416430.67 ( 0.00%) 1398700.11 ( -1.25%)
Hmean tput-32 1687702.72 ( 0.00%) 1671357.04 ( -0.97%)
Hmean tput-40 1798094.90 ( 0.00%) 2015616.46 * 12.10%*
Hmean tput-48 1972731.77 ( 0.00%) 2333233.72 ( 18.27%)
Hmean tput-56 2386872.38 ( 0.00%) 2759483.38 ( 15.61%)
Hmean tput-64 2909475.33 ( 0.00%) 2925074.69 ( 0.54%)
Hmean tput-72 2585071.36 ( 0.00%) 2962443.97 ( 14.60%)
Hmean tput-80 2994387.24 ( 0.00%) 3015980.59 ( 0.72%)
Hmean tput-88 3061408.57 ( 0.00%) 3010296.16 ( -1.67%)
Hmean tput-96 3052394.82 ( 0.00%) 2784743.41 ( -8.77%)
Hmean tput-104 2997814.76 ( 0.00%) 2758184.50 ( -7.99%)
Hmean tput-112 2955353.29 ( 0.00%) 2859705.09 ( -3.24%)
Hmean tput-120 2889770.71 ( 0.00%) 2764478.46 ( -4.34%)
Hmean tput-128 2871713.84 ( 0.00%) 2750136.73 ( -4.23%)
Stddev tput-1 5325.93 ( 0.00%) 2002.53 ( 62.40%)
Stddev tput-8 6630.54 ( 0.00%) 10905.00 ( -64.47%)
Stddev tput-16 25608.58 ( 0.00%) 6851.16 ( 73.25%)
Stddev tput-24 12117.69 ( 0.00%) 4227.79 ( 65.11%)
Stddev tput-32 27577.16 ( 0.00%) 8761.05 ( 68.23%)
Stddev tput-40 59505.86 ( 0.00%) 2048.49 ( 96.56%)
Stddev tput-48 168330.30 ( 0.00%) 93058.08 ( 44.72%)
Stddev tput-56 219540.39 ( 0.00%) 30687.02 ( 86.02%)
Stddev tput-64 121750.35 ( 0.00%) 9617.36 ( 92.10%)
Stddev tput-72 223387.05 ( 0.00%) 34081.13 ( 84.74%)
Stddev tput-80 128198.46 ( 0.00%) 22565.19 ( 82.40%)
Stddev tput-88 136665.36 ( 0.00%) 27905.97 ( 79.58%)
Stddev tput-96 111925.81 ( 0.00%) 99615.79 ( 11.00%)
Stddev tput-104 146455.96 ( 0.00%) 28861.98 ( 80.29%)
Stddev tput-112 88740.49 ( 0.00%) 58288.23 ( 34.32%)
Stddev tput-120 186384.86 ( 0.00%) 45812.03 ( 75.42%)
Stddev tput-128 78761.09 ( 0.00%) 57418.48 ( 27.10%)
Similarly, for embarassingly parallel problems like NPB-ep, there are
improvements due to better spreading across LLC when the machine is not
fully utilised.
vanilla sched-numaimb-v6
Min ep.D 31.79 ( 0.00%) 26.11 ( 17.87%)
Amean ep.D 31.86 ( 0.00%) 26.17 * 17.86%*
Stddev ep.D 0.07 ( 0.00%) 0.05 ( 24.41%)
CoeffVar ep.D 0.22 ( 0.00%) 0.20 ( 7.97%)
Max ep.D 31.93 ( 0.00%) 26.21 ( 17.91%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20220208094334.16379-3-mgorman@techsingularity.net
There are inconsistencies when determining if a NUMA imbalance is allowed
that should be corrected.
o allow_numa_imbalance changes types and is not always examining
the destination group so both the type should be corrected as
well as the naming.
o find_idlest_group uses the sched_domain's weight instead of the
group weight which is different to find_busiest_group
o find_busiest_group uses the source group instead of the destination
which is different to task_numa_find_cpu
o Both find_idlest_group and find_busiest_group should account
for the number of running tasks if a move was allowed to be
consistent with task_numa_find_cpu
Fixes: 7d2b5dd0bc ("sched/numa: Allow a floating imbalance between NUMA nodes")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20220208094334.16379-2-mgorman@techsingularity.net
Just before the 2.35 release of glibc, the __rseq_offset userspace ABI
was changed from int to ptrdiff_t.
Adapt to this change in the kernel selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://sourceware.org/pipermail/libc-alpha/2022-February/136024.html
A kernel exception was hit when trying to dump /proc/lockdep_chains after
lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!":
Unable to handle kernel paging request at virtual address 00054005450e05c3
...
00054005450e05c3] address between user and kernel address ranges
...
pc : [0xffffffece769b3a8] string+0x50/0x10c
lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c
...
Call trace:
string+0x50/0x10c
vsnprintf+0x468/0x69c
seq_printf+0x8c/0xd8
print_name+0x64/0xf4
lc_show+0xb8/0x128
seq_read_iter+0x3cc/0x5fc
proc_reg_read_iter+0xdc/0x1d4
The cause of the problem is the function lock_chain_get_class() will
shift lock_classes index by 1, but the index don't need to be shifted
anymore since commit 01bb6f0af9 ("locking/lockdep: Change the range
of class_idx in held_lock struct") already change the index to start
from 0.
The lock_classes[-1] located at chain_hlocks array. When printing
lock_classes[-1] after the chain_hlocks entries are modified, the
exception happened.
The output of lockdep_chains are incorrect due to this problem too.
Fixes: f611e8cf98 ("lockdep: Take read/write status in consideration when generate chainkey")
Signed-off-by: Cheng Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com
BCM4908 has the same watchdog as BCM63xx devices. Use "brcm,bcm6345-wdt"
binding which matches the first SoC with that block.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This adds a reference to the dts of the Raspberry Pi Zero 2 W,
so we don't need to maintain the content in arm64.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Raspberry Pi Zero 2 W mostly bases on the Raspberry Pi Zero W with
the following differences:
* Broadcom BCM2710A1, quad-core 64-bit SoC @ 1 GHz
* Synaptics BCM43436 (reported as BCM43430B0) IEEE 802.11b/g/n wireless LAN
Contrary to the Raspberry Pi 3 boards there is no GPIO expander.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add the Raspberry Pi Zero 2 W to DT schema.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch adds the cache info for the BCM2835 and BCM2836.
However, while testing I noticed that this is
not implemented for ARMv6/7.
Basically arch/arm/kernel/cacheinfo.c and other topology
related code is missing.
Since the work is already done and this has no negative effects,
I am submitting it for future/documentation purposes.
Signed-off-by: Richard Schleich <rs@noreya.tech>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2711 on newer kernel versions.
Signed-off-by: Richard Schleich <rs@noreya.tech>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The reset input to the LAN9303 chip is active low, and devicetree
gpio handles reflect this. Therefore, the gpio should be requested
with an initial state of high in order for the reset signal to be
asserted. Other uses of the gpio already use the correct polarity.
Fixes: a1292595e0 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fianelil <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit e9c787e65c ("scsi: allocate scsi_cmnd structures as part of
struct request"), the member cmd_pool in structure scsi_host_template is
not used, so remove it.
Link: https://lore.kernel.org/r/1644561778-183074-5-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Task->task_state_flags is already set in function sas_alloc_task(), so
remove duplicated setting.
Link: https://lore.kernel.org/r/1644561778-183074-3-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The callers of function sas_discover_event() do not check its return value.
The function also only ever returns 0, so use void instead.
Link: https://lore.kernel.org/r/1644561778-183074-2-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If backing file's filesystem has implemented ->fallocate(), we think the
loop device can support discard, then pass sb->s_blocksize as
discard_granularity. However, some underlying FS, such as overlayfs,
doesn't set sb->s_blocksize, and causes discard_granularity to be set as
zero, then the warning in __blkdev_issue_discard() is triggered.
Christoph suggested to pass kstatfs.f_bsize as discard granularity, and
this way is fine because kstatfs.f_bsize means 'Optimal transfer block
size', which still matches with definition of discard granularity.
So fix the issue by setting discard_granularity as kstatfs.f_bsize if it
is available, otherwise claims discard isn't supported.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Pei Zhang <pezhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220126035830.296465-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pci_driver probe functions aren't called with locks held and thus don't
need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Link: https://lore.kernel.org/r/20220210204223.104181-9-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 7eaceaccab ("block: remove per-queue plugging"), kernel
has removed blk_run_address_space(), blk_unplug() and sync_buffer(),
and moved to on-stack plugging. The document has been obsolete for
years.
Given that there is no obvious counterparts in the new mechinism to
replace old APIs, this patch drops the content directly.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20220207074931.20067-1-song.bao.hua@hisilicon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Driver added a new dev_pm_ops structure used only if CONFIG_PM is set. The
CONFIG_PM MACRO needed to be moved up in the code to avoid the compiler
warnings. The hunk to move the location was missing from the above patch.
Found by kernel test robot by building driver with CONFIG_PM disabled.
Link: https://lore.kernel.org/all/202202090657.bstNLuce-lkp@intel.com/
Link: https://lore.kernel.org/r/20220210201151.236170-1-don.brace@microchip.com
Fixes: c66e078ad8 ("scsi: smartpqi: Fix hibernate and suspend")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike Mcgowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the queue path, move around when we assign sas_task->lldd_task such that
this pointer and the SAS_TASK_AT_INITIATOR flag are set atomically. It is
also not required to clear SAS_TASK_AT_INITIATOR in isci_task_execute_task()
error path as it is also cleared immediately after in isci_task_refuse()
call.
Now the following items may be considered:
- SAS_TASK_STATE_DONE and SAS_TASK_AT_INITIATOR are mutually exclusive
apart from possibly when SAS_TASK_STATE_DONE is set in
sas_scsi_find_task(), but that is after .lldd_abort_task, i.e. the
considered callback, is called.
- If isci_task_refuse() is called in the queue path, then
sas_task->lldd_task and SAS_TASK_AT_INITIATOR are cleared atomically in
isci_task_refuse().
- In the completion path, SAS_TASK_STATE_DONE is set and
SAS_TASK_AT_INITIATOR is cleared atomically before the
sas_task.lldd_task is cleared later.
So in isci_task_abort_task() if SAS_TASK_STATE_DONE is not set and
sas_task.lldd_task is still set, then SAS_TASK_AT_INITIATOR must be set -
so we can drop this check on SAS_TASK_AT_INITIATOR.
[mkp: checkpatch]
Link: https://lore.kernel.org/r/1644489804-85730-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The TH_LOG() macro is an optional debug logging function made
available by kselftest itself. When TH_LOG_ENABLED is set it
prints the provided message with additional information and
formatting that already includes a newline.
Providing a newline to the message printed by TH_LOG() results
in a double newline that produces irregular test output.
Remove the unnecessary newlines from the text provided to
TH_LOG().
Fixes: 1b35eb7195 ("selftests/sgx: Encpsulate the test enclave creation")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/6fd171ba622aed172a7c5b129d34d50bd0482f24.1644355600.git.reinette.chatre@intel.com
In support of debugging the SGX tests print details from
the enclave and its memory mappings if any failure is encountered
during enclave loading.
When a failure is encountered no data is printed because the
printing of the data is preceded by cleanup of the data.
Move the data cleanup after the data print.
Fixes: 1471721489 ("selftests/sgx: Dump segments and /proc/self/maps only on failure")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/dab672f771e9b99e50c17ae2a75dc0b020cb0ce9.1644355600.git.reinette.chatre@intel.com
It is not possible to build an enclave if it was not possible to load
the binary from which it should be constructed. Do not attempt
to make further progress but instead return with failure. A
"return false" from setup_test_encl() is expected to trip an
ASSERT_TRUE() and abort the rest of the test.
Fixes: 1b35eb7195 ("selftests/sgx: Encpsulate the test enclave creation")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/e3778c77f95e6dca348c732b12f155051d2899b4.1644355600.git.reinette.chatre@intel.com
== Background ==
The SGX selftests track parts of the enclave binaries in an array:
encl->segment_tbl[]. That array is dynamically allocated early
(but not first) in the test's lifetime. The array is referenced
at the end of the test in encl_delete().
== Problem ==
encl->segment_tbl[] can be NULL if the test fails before its
allocation. That leads to a NULL-pointer-dereference in encl_delete().
This is triggered during early failures of the selftest like if the
enclave binary ("test_encl.elf") is deleted.
== Solution ==
Ensure encl->segment_tbl[] is valid before attempting to access
its members. The offset with which it is accessed, encl->nr_segments,
is initialized before encl->segment_tbl[] and thus considered valid
to use after the encl->segment_tbl[] check succeeds.
Fixes: 3200505d4d ("selftests/sgx: Create a heap for the test enclave")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/90a31dfd640ea756fa324712e7cbab4a90fa7518.1644355600.git.reinette.chatre@intel.com
The qla_sess_op_cmd_list was introduced in commit 8b2f5ff3d0 ("qla2xxx:
cleanup cmd in qla workqueue before processing TMR"). Then the usage of
this list was dropped in commit fb35265b12 ("scsi: qla2xxx: Remove
session creation redundant code").
Thus, remove this list since it is no longer used.
Link: https://lore.kernel.org/r/AS8PR10MB49524AAB4C8016E4AFF17FFB9D2D9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The new YAML device tree bindings gives new and proper names
to several of the AB850[05] nodes and redefines the way we
use numbering on PWMs to use reg.
Update all the DTS nodes accordingly.
Add the missing thermal node to the AB8505.
Drop the debugfs nodes because these are not real devices.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These are not disabled on the AB8500 and after testing we
see they work fine, so enable them on AB8505 too.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Eliminate the following smatch warning:
drivers/scsi/pm8001/pm8001_ctl.c:760 pm8001_update_flash() warn:
inconsistent indenting
Link: https://lore.kernel.org/r/20220208025500.29511-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of doing a cast to storage that is too small, add a union for the
high 64 bits. Silences the warnings under -Warray-bounds:
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_send_messages':
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1934:44: error: array subscript 'struct viosrp_crq[0]' is partly outside array bounds of 'u64[1]' {aka 'long long unsigned int[1]'} [-Werror=array-bounds]
1934 | crq->valid = VALID_CMD_RESP_EL;
| ^~
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1875:13: note: while referencing 'msg_hi'
1875 | u64 msg_hi = 0;
| ^~~~~~
There is no change to the resulting binary instructions.
Link: https://lore.kernel.org/lkml/20220125142430.75c3160e@canb.auug.org.au
Link: https://lore.kernel.org/r/20220208061231.3429486-1-keescook@chromium.org
Cc: Michael Cyr <mikecyr@linux.ibm.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Tyrel Datwyler <tyreld@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes a deadlock added with commit b40f3894e3 ("scsi: qedi: Complete
TMF works before disconnect")
Bug description from Jia-Ju Bai:
qedi_process_tmf_resp()
spin_lock(&session->back_lock); --> Line 201 (Lock A)
spin_lock(&qedi_conn->tmf_work_lock); --> Line 230 (Lock B)
qedi_process_cmd_cleanup_resp()
spin_lock_bh(&qedi_conn->tmf_work_lock); --> Line 752 (Lock B)
spin_lock_bh(&conn->session->back_lock); --> Line 784 (Lock A)
When qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp() are
concurrently executed, the deadlock can occur.
This patch fixes the deadlock by not holding the tmf_work_lock in
qedi_process_cmd_cleanup_resp while holding the back_lock. The
tmf_work_lock is only needed while we remove the tmf_work from the
work_list.
Link: https://lore.kernel.org/r/20220208185448.6206-1-michael.christie@oracle.com
Fixes: b40f3894e3 ("scsi: qedi: Complete TMF works before disconnect")
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is a fairly large set of bugfixes, most of which had
been sent a while ago but only now made it into the soc tree:
Maintainer file updates:
- Claudiu Beznea now co-maintains the at91 soc family,
replacing Ludovic Desroches.
- Michael Walle maintains the sl28cpld drivers
- Alain Volmat and Raphael Gallais-Pou take over some
drivers for ST platforms
- Alim Akhtar is an additional reviewer for Samsung platforms
Code fixes:
- Op-tee had a problem with object lifetime that needs
a slightly complex fix, as well as another bug with
error handling.
- Several minor issues for the OMAP platform, including
a regression with the timer
- A Kconfig change to fix a build-time issue on Intel
SoCFPGA
Device tree fixes:
- The Amlogic Meson platform fixes a boot regression on
am1-odroid, a spurious interrupt, and a problem with
reserved memory regions
- In the i.MX platform, several bug fixes are needed to
make devices work correctly: SD card detection,
alarmtimer, and sound card on some board. One patch
for the GPU got in there by accident and gets reverted
again.
- TI K3 needs a fix for J721S2 serial port numbers
- ux500 needs a fix to mount the SD card as root on
the Skomer phone.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIG1ZEACgkQmmx57+YA
GNl89A/9G+BMgx/uWwjYPrKqT3uYHfG6g1RJMnJ1c9R/K5NaKBUFJ5KPWaStfnII
17HKcQ18ugGk2gGpFs0ir4upRReDeb3MbmGSpytU7GnNgtGqSJIMcczMVXirsrCd
52N5FKasDZHBM4GYNyFwnZ/HUXyoSYPzt1pA9L9qKqYz3CS74DcgIkeqXR8J3KMn
VZhU5uFxJAk82IDHkRMqXVWykXObphB26iqtRRrf9HmwNirOKR8BLBWfeWEBwxpt
ecqJtQAoLzTZVBQu57Lel7QPUsJh3/xoSZlbUlhY8bUvGKHQvRlOx47x7kJ3AUNS
5Hi7+PY3qrYG3/B1N9XSnFeiHGCAoVR6jHA8tPGIMsnMdJ8HywwUh8AI2if9I9Hk
nqbeGRG3eOoGJZ1oiJ0YMSadU2FCUG2TxrbyI7JcHzyjNCAgkZ7mXawCHgqLry1S
azHDdRlIQHtDCxLu/Fept0ujGVJe1PYLzAfyzezrcQrf7N1dnbgBbuvQt7bQ3PQD
Xcsx9xwPD3kJeXeVB+gGyDjZTO4zpD59+P7DGwwRNKlVKtzLzbJHQ3/+/ajdKbHP
JlWSlDAdLxt4MaeFf3fZHRtO4tS4nYRUg0CsLjwPxd6jGmFT4V5Dzj2nHGQIarpw
THQt15abGikpVHTZNSvzOkr7rvJDDmHUniZS480KhxT6E2Aldw8=
=bRzz
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bugfixes, most of which had been sent a
while ago but only now made it into the soc tree:
Maintainer file updates:
- Claudiu Beznea now co-maintains the at91 soc family, replacing
Ludovic Desroches.
- Michael Walle maintains the sl28cpld drivers
- Alain Volmat and Raphael Gallais-Pou take over some drivers for ST
platforms
- Alim Akhtar is an additional reviewer for Samsung platforms
Code fixes:
- Op-tee had a problem with object lifetime that needs a slightly
complex fix, as well as another bug with error handling.
- Several minor issues for the OMAP platform, including a regression
with the timer
- A Kconfig change to fix a build-time issue on Intel SoCFPGA
Device tree fixes:
- The Amlogic Meson platform fixes a boot regression on am1-odroid, a
spurious interrupt, and a problem with reserved memory regions
- In the i.MX platform, several bug fixes are needed to make devices
work correctly: SD card detection, alarmtimer, and sound card on
some board. One patch for the GPU got in there by accident and gets
reverted again.
- TI K3 needs a fix for J721S2 serial port numbers
- ux500 needs a fix to mount the SD card as root on the Skomer phone"
* tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits)
Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"
arm64: Remove ARCH_VULCAN
MAINTAINERS: add myself as a maintainer for the sl28cpld
MAINTAINERS: add IRC to ARM sub-architectures and Devicetree
MAINTAINERS: arm: samsung: add Git tree and IRC
ARM: dts: Fix boot regression on Skomer
ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
docs/ABI: testing: aspeed-uart-routing: Escape asterisk
MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
MAINTAINERS: Update Benjamin Gaignard maintainer status
ARM: socfpga: fix missing RESET_CONTROLLER
arm64: dts: meson-sm1-odroid: fix boot loop after reboot
arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
arm64: dts: meson-g12: add ATF BL32 reserved-memory region
arm64: dts: meson-gx: add ATF BL32 reserved-memory region
arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
optee: use driver internal tee_context for some rpc
...
This done routine will delete the timer and check for its return value and
decrease the reference count accordingly. This prevents boot hangs reported
after commit 31e6cdbe0e ("scsi: qla2xxx: Implement ref count for SRB")
was merged.
Link: https://lore.kernel.org/r/20220208093946.4471-1-njavali@marvell.com
Fixes: 31e6cdbe0e ("scsi: qla2xxx: Implement ref count for SRB")
Reported-by: Ewan Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If cxl_device_lock() is used on a non-CXL device the expectation is that
the lock class will fall back to CXL_ANON_LOCK. Instead it crashes when
trying to determine if the device is a 'decoder'. Specifically when the
device has a NULL type pointer. Just check for NULL before
de-referencing ->release.
Fixes: 3c5b903955 ("cxl: Prove CXL locking")
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164439225406.2941117.3927102269866914339.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The device_lock_assert() in unregister_port() fails to pick the right
device leading to splats like the following from:
echo "ACPI0017:00" > /sys/bus/platform/drivers/cxl_acpi/unbind
WARNING: CPU: 32 PID: 1147 at include/linux/device.h:787 unregister_port+0x49/0x50 [cxl_c
[..]
RIP: 0010:unregister_port+0x49/0x50 [cxl_core]
[..]
Call Trace:
<TASK>
release_nodes+0x63/0x80
devres_release_all+0x8b/0xc0
__device_release_driver+0x190/0x240
device_driver_detach+0x3e/0xa0
unbind_store+0x113/0x130
Fix it up to assert on the device_lock() for ACPI0017 for root and 1st
level ports, and parent ports for all the rest.
Fixes: 54cdbf845c ("cxl/port: Add a driver for 'struct cxl_port' objects")
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164439224893.2941117.18331456248117887720.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Yonghong Song says:
====================
The patch [1] exposed a bpf_timer initialization bug in function
check_and_init_map_value(). With bug fix here, the patch [1]
can be applied with all selftests passed. Please see individual
patches for fix details.
[1] https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com/
Changelog:
v3 -> v4:
. move header file in patch #1 to avoid bpf-next merge conflict
v2 -> v3:
. switch patch #1 and patch #2 for better bisecting
v1 -> v2:
. add Fixes tag for patch #1
. rebase against bpf tree
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the following code in check_and_init_map_value()
*(struct bpf_timer *)(dst + map->timer_off) =
(struct bpf_timer){};
can help generate bpf_timer definition in vmlinuxBTF.
But the code above may not zero the whole structure
due to anonymour members and that code will be replaced
by memset in the subsequent patch and
bpf_timer definition will disappear from vmlinuxBTF.
Let us emit the type explicitly so bpf program can continue
to use it from vmlinux.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211194948.3141529-1-yhs@fb.com
Avoid spam the kernel log on application memory allocation failures.
__func__ argument was also removed from dev_fmt macro due to
parameter conflicts with dynamic_dev_dbg.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.comi>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the warning: no previous prototype for 'get_process_num_bos'
[-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix checkpatch reported warning for a quoted line and block line
comments.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the UMC_STATUS register is not linear, adjust offset
calculation formula to get correct address
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
