The ax25_disconnect() in ax25_kill_by_device() is not
protected by any locks, thus there is a race condition
between ax25_disconnect() and ax25_destroy_socket().
when ax25->sk is assigned as NULL by ax25_destroy_socket(),
a NULL pointer dereference bug will occur if site (1) or (2)
dereferences ax25->sk.
ax25_kill_by_device() | ax25_release()
ax25_disconnect() | ax25_destroy_socket()
... |
if(ax25->sk != NULL) | ...
... | ax25->sk = NULL;
bh_lock_sock(ax25->sk); //(1) | ...
... |
bh_unlock_sock(ax25->sk); //(2)|
This patch moves ax25_disconnect() into lock_sock(), which can
synchronize with ax25_destroy_socket() in ax25_release().
Fail log:
===============================================================
BUG: kernel NULL pointer dereference, address: 0000000000000088
...
RIP: 0010:_raw_spin_lock+0x7e/0xd0
...
Call Trace:
ax25_disconnect+0xf6/0x220
ax25_device_event+0x187/0x250
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x17d/0x230
rollback_registered_many+0x1f1/0x950
unregister_netdevice_queue+0x133/0x200
unregister_netdev+0x13/0x20
...
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
netvsc_device_remove() calls vunmap() inside which should not be
called in the interrupt context. Current code calls hv_unmap_memory()
in the free_netvsc_device() which is rcu callback and maybe called
in the interrupt context. This will trigger BUG_ON(in_interrupt())
in the vunmap(). Fix it via moving hv_unmap_memory() to netvsc_device_
remove().
Fixes: 846da38de0 ("net: netvsc: Add Isolation VM support for netvsc driver")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2022-02-07
Corinna Vinschen says:
Fix the kernel warning "Missing unregister, handled but fix driver"
when running, e.g.,
$ ethtool -G eth0 rx 1024
on igc. Remove memset hack from igb and align igb code to igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart says:
====================
net: fix issues when uncloning an skb dst+metadata
This fixes two issues when uncloning an skb dst+metadata in
tun_dst_unclone; this was initially reported by Vlad Buslov[1]. Because
of the memory leak fixed by patch 2, the issue in patch 1 never happened
in practice.
tun_dst_unclone is called from two different places, one in geneve/vxlan
to handle PMTU and one in net/openvswitch/actions.c where it is used to
retrieve tunnel information. While both Vlad and I tested the former, we
could not for the latter. I did spend quite some time trying to, but
that code path is not easy to trigger. Code inspection shows this should
be fine, the tunnel information (dst+metadata) is uncloned and the skb
it is referenced from is only consumed after all accesses to the tunnel
information are done:
do_execute_actions
output_userspace
dev_fill_metadata_dst <- dst+metadata is uncloned
ovs_dp_upcall
queue_userspace_packet
ovs_nla_put_tunnel_info <- metadata (tunnel info) is accessed
consume_skb <- dst+metadata is freed
Thanks!
Antoine
[1] https://lore.kernel.org/all/ygnhh79yluw2.fsf@nvidia.com/T/#m2f814614a4f5424cea66bbff7297f692b59b69a0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.
The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.
Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.
Fixes: fc4099f172 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.
The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.
In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).
Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.
Fixes: d71785ffc7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document Gigabit Ethernet IP found on RZ/G2UL SoC. Gigabit Ethernet
Interface is identical to one found on the RZ/G2L SoC. No driver changes
are required as generic compatible string "renesas,rzg2l-gbeth" will be
used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document Gigabit Ethernet IP found on RZ/V2L SoC. Gigabit Ethernet
Interface is identical to one found on the RZ/G2L SoC. No driver changes
are required as generic compatible string "renesas,rzg2l-gbeth" will be
used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink_dump structure has a union of 'long args[6]' and a context
buffer as scratch space.
Convert ctnetlink to use a structure, its easier to read than the
raw 'args' usage which comes with no type checks and no readable names.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a follow up of the previous patch that enables to get
skb->priority. It's now posssible to set it also.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allow up to 16-byte comparisons with a new cmp fast version. Use two
64-bit words and calculate the mask representing the bits to be
compared. Make sure the comparison is 64-bit aligned and avoid
out-of-bound memory access on registers.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of two exported functions, export a single option structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For updating eache missed value we can use cmpxchg.
This also avoids need to disable BH.
kernel robot reported build failure on v1 because not all arches support
cmpxchg for u16, so extend this to u32.
This doesn't increase struct size, existing padding is used.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We always assign the default device name as the chip_label in hog
structures which makes it impossible to assign hogs to chips. Let's
first check if a custom label was set and then copy it instead of the
default device name.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
As Ludovic is more focusing on other aspects of the Microchip
Linux-based development, replace him with Claudiu.
Entry is added to the CREDITS file.
Thanks Ludovic for these great contributions in the kernel space!
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/23819d8baa635815d0893955197561fe4f044d5e.1643553501.git.nicolas.ferre@microchip.com
When the nft_concat_range test failed, it exit 1 in the code
specifically.
But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Calling nf_defrag_ipv4_disable() instead of nf_defrag_ipv6_disable()
was probably not the intent.
I found this by code inspection, while chasing a possible issue in TPROXY.
Fixes: de8c12110a ("netfilter: disable defrag once its no longer needed")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simple test for synproxy feature, iperf3 should be intercepted
by synproxy netns, but connection should still succeed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Thumb2 uses R7 rather than R11 as the frame pointer, and even if we
rarely use a frame pointer to begin with when building in Thumb2 mode,
there are cases where it is required by the compiler (Clang when
inserting profiling hooks via -pg)
However, preserving and restoring the frame pointer is risky, as any
unhandled exceptions raised in the mean time will produce a bogus
backtrace, and it would be better not to touch the frame pointer at all.
This is the case even when CONFIG_FRAME_POINTER is not set, as the
unwind directive used by the unwinder may also use R7 or R11 as the
unwind anchor, even if the frame pointer is not managed strictly
according to the frame pointer ABI.
So let's tweak the cacheflush asm code not to clobber R7 or R11 at all,
so that we can drop R7 from the clobber lists of the inline asm blocks
that call these routines, and remove the code that preserves/restores
R11.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
We have several comments that start with '/**' but don't conform to the
kernel doc standard. Add proper detailed descriptions for the affected
definitions and move the docs from the forward declarations to the
struct definitions where applicable.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
In a pipelined engine situation, we might either have the host which
internally has support for error correction, or have it using an
external hardware block for this purpose. In the former case, the host
is also the ECC engine. In the latter case, it is not. In order to get
the right pointers on the right devices (for example: in order to devm_*
allocate variables), let's introduce this helper which can safely be
called by pipelined ECC engines in order to retrieve the right device
structure.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-16-miquel.raynal@bootlin.com
Some SPI-NAND chips do not support on-die ECC. For these chips,
correction must apply on the SPI controller end. In order to avoid
doing all the calculations by software, Macronix provides a specific
engine that can offload the intensive work.
Add Macronix ECC engine support, this engine can work in conjunction
with a SPI controller and a raw NAND controller, it can be pipelined
or external and supports linear and syndrome layouts.
Right now the simplest configuration is supported: SPI controller
external and linear ECC engine.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-15-miquel.raynal@bootlin.com
Prevent rawnand access while in a suspended state.
Commit 013e6292aa ("mtd: rawnand: Simplify the locking") allows the
rawnand layer to return errors rather than waiting in a blocking wait.
Tested on a iMX6ULL.
Fixes: 013e6292aa ("mtd: rawnand: Simplify the locking")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220208085213.1838273-1-sean@geanix.com
HD-audio driver handles the multiple instances and keeps the static
index that is incremented at each probe. This becomes a problem when
user tries to re-bind the device via sysfs multiple times; as the
device index isn't cleared unlike rmmod case, it points to the next
element at re-binding, and eventually later you can't probe any more
when it reaches to SNDRV_CARDS_MAX (usually 32).
This patch is an attempt to improve the handling at rebinding.
Instead of a static device index, now we keep a bitmap and assigns to
the first zero bit position. At the driver remove, in return, the
bitmap slot is cleared again, so that it'll be available for the next
probe.
Reported-by: Alexander Sergeyev <sergeev917@gmail.com>
Link: https://lore.kernel.org/r/20220209081912.20687-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Thumb2 code uses R7 as the frame pointer rather than R11, because the
opcodes to access it are generally shorter.
This means that there are cases where we cannot simply add it to the
clobber list of an asm() block, but need to preserve/restore it
explicitly, or the compiler may complain in some cases (e.g., Clang
builds with ftrace enabled).
Since R11 is not special in that case, clobber it instead, and use it to
preserve/restore the value of R7.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Enable the function graph tracer in combination with the EABI unwinder,
so that Thumb2 builds or Clang ARM builds can make use of it.
This involves using the unwinder to locate the return address of an
instrumented function on the stack, so that it can be overridden and
made to refer to the ftrace handling routines that need to be called at
function return.
Given that for these builds, it is not guaranteed that the value of the
link register is stored on the stack, fall back to the stack slot that
will be used by the ftrace exit code to restore LR in the instrumented
function's execution context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace graph tracer needs to override the return address of an
instrumented function, in order to install a hook that gets invoked when
the function returns again.
Currently, we only support this when building for ARM using GCC with
frame pointers, as in this case, it is guaranteed that the function will
reload LR from [FP, #-4] in all cases, and we can simply pass that
address to the ftrace code.
In order to support this for configurations that rely on the EABI
unwinder, such as Thumb2 builds, make the unwinder keep track of the
address from which LR was unwound, permitting ftrace to make use of this
in a subsequent patch.
Drop the call to is_kernel_text_address(), which is problematic in terms
of ftrace recursion, given that it may be instrumented itself. The call
is redundant anyway, as no unwind directives will be found unless the PC
points to memory that is known to contain executable code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Fix the frame pointer handling in the function graph tracer entry and
exit code so we can enable HAVE_FUNCTION_GRAPH_FP_TEST. Instead of using
FP directly (which will have different values between the entry and exit
pieces of the function graph tracer), use the value of SP at entry and
exit, as we can derive the former value from the frame pointer.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Avoid explicit literal loads and instead, use accessor macros that
generate the optimal sequence depending on the architecture revision
being targeted.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tweak the ftrace return paths to avoid redundant loads of SP, as well as
unnecessary clobbering of IP.
This also fixes the inconsistency of using MOV to perform a function
return, which is sub-optimal on recent micro-architectures but more
importantly, does not perform an interworking return, unlike compiler
generated function returns in Thumb2 builds.
Let's fix this by popping PC from the stack like most ordinary code
does.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Kernel images that are large in comparison to the range of a direct
branch may fail to work as expected with ftrace, as patching a direct
branch to one of the core ftrace routines may not be possible from the
.init.text section, if it is emitted too far away from the normal .text
section.
This is more likely to affect Thumb2 builds, given that its range is
only -/+ 16 MiB (as opposed to ARM which has -/+ 32 MiB), but may occur
in either ISA.
To work around this, add a couple of trampolines to .init.text and
swap these in when the ftrace patching code is operating on callers in
.init.text.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The compiler emitted hook used for ftrace consists of a PUSH {LR} to
preserve the link register, followed by a branch-and-link (BL) to
__gnu_mount_nc. Dynamic ftrace patches away the latter to turn the
combined sequence into a NOP, using a POP {LR} instruction.
This is not necessary, since the link register does not get clobbered in
this case, and simply adding #4 to the stack pointer is sufficient, and
avoids a memory access that may take a few cycles to resolve depending
on the micro-architecture.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Using ADR to take the address of 'ftrace_stub' via a local label
produces an address that has the Thumb bit cleared, which means the
subsequent comparison is guaranteed to fail. Instead, use the badr
macro, which forces the Thumb bit to be set.
Fixes: a3ba87a614 ("ARM: 6316/1: ftrace: add Thumb-2 support")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
struct xfrm_user_offload has flags variable that received user input,
but kernel didn't check if valid bits were provided. It caused a situation
where not sanitized input was forwarded directly to the drivers.
For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by
strongswan, but not implemented in the kernel at all.
As a solution, check and sanitize input flags to forward
XFRM_OFFLOAD_INBOUND to the drivers.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The i.MX 7Solo currently does not have multiple operating points,
however, in order for the i.MX Thermal driver to successfully probe
a cpufreq device is required. Add it to the cpufreq-dt-platdev
driver's blocklist to allow using imx-cpufreq-dt.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Processor operating points for imx7s.dtsi should be properly defined to
perform correct imx-cpufreq-dt probe and registration and provide an
access to the temperature sensors using the i.MX thermal driver.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The fuse consists of 64 bits, with this statement we're supposed to get
the upper 32 bits but it actually read out of bounds and got 0 instead
of the desired value which lead to the "PVS bin not set." codepath being
run resetting our pvs value.
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
drivers/cpufreq calls cpumask_weight() to check if any bit of a given
cpumask is set. We can do it more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for SCMI cpufreq driver)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the event that the SoC is under thermal pressure while booting it's
possible for the dcvs notification to happen inbetween the cpufreq
framework calling init and it actually updating the policy's
related_cpus cpumask.
Prior to the introduction of the thermal pressure update helper an empty
cpumask would simply result in the thermal pressure of no cpus being
updated, but the new code will attempt to dereference an invalid per_cpu
variable.
Avoid this problem by using the newly reintroduced "ready" callback, to
postpone enabling the IRQ until the related_cpus cpumask is filled in.
Fixes: 0258cb19c7 ("cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This effectively revert '4bf8e58211 ("cpufreq: Remove ready()
callback")', in order to reintroduce the ready callback.
This is needed in order to be able to leave the thermal pressure
interrupts in the Qualcomm CPUfreq driver disabled during
initialization, so that it doesn't fire while related_cpus are still 0.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[ Viresh: Added the Chinese translation as well and updated commit msg ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 43a08c3bda ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.
Fixes: 43a08c3bda ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()")
Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
