destroy_workqueue() already drains the queue before destroying it, so there
is no need to flush it explicitly.
Remove the redundant flush_workqueue() calls.
Link: https://lore.kernel.org/r/20220127013934.1184923-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.".
Fixes: bbe3a66c3f ("soc: qcom: rpmpd: Add a Power domain driver to model corners")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211231094419.1941054-1-jiasheng@iscas.ac.cn
Fix qcom_scm_call(), qcom_scm_call_atomic,
and qcom_scm_cpu_power_down() kernel-doc comment to remove
remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
drivers/firmware/qcom_scm.c:191: warning: Function parameter or member
'res' not described in 'qcom_scm_call'
drivers/firmware/qcom_scm.c:191: warning: Excess function parameter
'svc_id' description in 'qcom_scm_call'
drivers/firmware/qcom_scm.c:191: warning: Excess function parameter
'cmd_id' description in 'qcom_scm_call'
drivers/firmware/qcom_scm.c:219: warning: Excess function parameter
'svc_id' description in 'qcom_scm_call_atomic'
drivers/firmware/qcom_scm.c:219: warning: Excess function parameter
'cmd_id' description in 'qcom_scm_call_atomic'
drivers/firmware/qcom_scm.c:360: warning: Function parameter or member
'flags' not described in 'qcom_scm_cpu_power_down'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211230141245.29444-1-yang.lee@linux.alibaba.com
The hisi_sas_slot.is_internal member is not set properly for ATA commands
which the driver sends directly. A TMF struct pointer is normally used as a
test to set this, but it is NULL for those commands. It's not ideal, but
pass an empty TMF struct to set that member properly.
Link: https://lore.kernel.org/r/1643627607-138785-1-git-send-email-john.garry@huawei.com
Fixes: dc313f6b12 ("scsi: hisi_sas: Factor out task prep and delivery code")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.
This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.
Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes: 4d4e9907ff ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
Because WB performs writes in SLC mode, it is not possible to use
WriteBooster indefinitely. Vendors can set a lifetime limit in the device.
If the lifetime exceeds this limit, the device ican disable the WB feature.
The feature is defined in the "bWriteBoosterBufferLifeTimeEst (IDN = 1E)"
attribute.
With lifetime exceeding the limit value, the current driver continuously
performs the following query:
- Write Flag: WB_ENABLE / DISABLE
- Read attr: Available Buffer Size
- Read attr: Current Buffer Size
This patch recognizes that WriteBooster is no longer supported by the
device, and prevents unnecessary queries.
Link: https://lore.kernel.org/r/1891546521.01643252701746.JavaMail.epsvc@epcpadp3
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/power/supply/cros_usbpd-charger.c:107:23: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently a use-after-free may occur if a sas_task is aborted by the upper
layer before we handle the I/O completion in mpi_ssp_completion() or
mpi_sata_completion().
In this case, the following are the two steps in handling those I/O
completions:
- Call complete() to inform the upper layer handler of completion of
the I/O.
- Release driver resources associated with the sas_task in
pm8001_ccb_task_free() call.
When complete() is called, the upper layer may free the sas_task. As such,
we should not touch the associated sas_task afterwards, but we do so in the
pm8001_ccb_task_free() call.
Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.
Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently a use-after-free may occur if a TMF sas_task is aborted before we
handle the IO completion in mpi_ssp_completion(). The abort occurs due to
timeout.
When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the
sas_task is freed in pm8001_exec_internal_tmf_task().
However, if the I/O completion occurs later, the I/O completion still
thinks that the sas_task is available. Fix this by clearing the ccb->task
if the TMF times out - the I/O completion handler does nothing if this
pointer is cleared.
Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
make W=1 complains of an undescribed function parameter:
drivers/scsi/pm8001/pm80xx_hwi.c:3938: warning: Function parameter or member 'circularQ' not described in 'process_one_iomb'
Fix it.
Link: https://lore.kernel.org/r/1643289172-165636-2-git-send-email-john.garry@huawei.com
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There was an AQ error I40E_AQ_RC_EINVAL when trying
to reset bw limit as part of bw allocation setup.
This was caused by trying to reset bw limit with
DCB enabled. Bw limit should not be reset when
DCB is enabled. The code was relying on the pf->flags
to check if DCB is enabled but if only 1 TC is available
this flag will not be set even though DCB is enabled.
Add a check for number of TC and if it is 1
don't try to reset bw limit even if pf->flags shows
DCB as disabled.
Fixes: fa38e30ac7 ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Syzbot tripped over the following complaint from the kernel:
WARNING: CPU: 2 PID: 15402 at mm/util.c:597 kvmalloc_node+0x11e/0x125 mm/util.c:597
While trying to run XFS_IOC_GETBMAP against the following structure:
struct getbmap fubar = {
.bmv_count = 0x22dae649,
};
Obviously, this is a crazy huge value since the next thing that the
ioctl would do is allocate 37GB of memory. This is enough to make
kvmalloc mad, but isn't large enough to trip the validation functions.
In other words, I'm fussing with checks that were **already sufficient**
because that's easier than dealing with 644 internal bug reports. Yes,
that's right, six hundred and forty-four.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Some boards prefer not to specify a try-power-role. Update the port
property parsing logic to not error out in case a try-power-role is not
specified.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/chrome-platform/20220127191659.3560810-1-pmalani@chromium.org/
On some OEM setups users can configure the BIOS for S3 or S2idle.
When configured to S3 users can still choose 's2idle' in the kernel by
using `/sys/power/mem_sleep`. Before commit 6dc8265f98 ("drm/amdgpu:
always reset the asic in suspend (v2)"), the GPU would crash. Now when
configured this way, the system should resume but will use more power.
As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about
potential power consumption issues during their first attempt at
suspending.
Reported-by: Bjoren Dasse <bjoern.daase@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a function to change the IOMMU pagetable addressing to
AArch32 LPAE or AArch64. If doing that, then this must be
done for each IOMMU context (not necessarily at the same time).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
[Marijn: ported from 5.3 to the unified architecture in 5.11]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208083423.22037-4-marijn.suijten@somainline.org
This is not necessary for basic functionality of the IOMMU, but
it's an optimization that tells to the TZ what's the maximum
mappable size for the secure IOMMUs, so that it can optimize
the data structures in the TZ itself.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
[Marijn: ported from 5.3 to the unified architecture in 5.11]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208083423.22037-3-marijn.suijten@somainline.org
Member assignments to qcom_scm_desc were moved into struct initializers
in 57d3b81671 ("firmware: qcom_scm: Remove thin wrappers") including
the case in qcom_scm_iommu_secure_ptbl_init, except that the - now
duplicate - assignment to desc was left in place. While not harmful,
remove this unnecessary extra reassignment.
Fixes: 57d3b81671 ("firmware: qcom_scm: Remove thin wrappers")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208083423.22037-2-marijn.suijten@somainline.org
Add a node for pm8226's vibration motor driver.
Keep it disabled by default, some devices don't make use of it.
Signed-off-by: Jack Matthews <jm5112356@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211123003256.2467776-1-jm5112356@gmail.com
The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211206154003.39892-3-robert.foss@linaro.org
The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211206154003.39892-2-robert.foss@linaro.org
This commit implements a DTS file for LG Bullhead (Nexus 5X) rev 1.0
with its matching "qcom,board-id" property.
Signed-off-by: Jean THOMAS <virgule@jeanthomas.me>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201231832.188634-2-virgule@jeanthomas.me
This patch puts the generic code common across all hardware revisions
into a DTSI file.
It also prefixes the DTS filename with the vendor name, to follow the
naming convention used by other DTS files.
Signed-off-by: Jean THOMAS <virgule@jeanthomas.me>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201231832.188634-1-virgule@jeanthomas.me
Though sc7280 itself doesn't need any of the defines in gpio.h, it's
highly likely that the actual boards will use them. Let's add the
include to the sc7280.dtsi file so that boards don't need to do it.
Suggested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.4.I3194c8bdb2ad3212665286fa273710a3c4840e94@changeid
This factors out a device tree fragment from some sc7280 device
trees. It represents the device tree bits that should be included for
"Chrome" based sc7280 boards. On these boards the bootloader (Coreboot
+ Depthcharge) configures things slightly different than the
bootloader that Qualcomm provides. The modem firmware on these boards
also works differently than on other Qulacomm products and thus the
reserved memory map needs to be adjusted.
NOTES:
- This is _not_ quite a no-op change. The "herobrine" and "idp"
fragments here were different and it looks like someone simply
forgot to update the herobrine version. This updates a few numbers
to match IDP. This will also cause the `pmk8350_pon` to be disabled
on idp/crd, which I belive is a correct change.
- At the moment this assumes LTE skus. Once it's clearer how WiFi SKUs
will work (how much of the memory map they can reclaim) we may add
an extra fragment that will rejigger one way or the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.3.Iac012fa8d727be46448d47027a1813ea716423ce@changeid
Hammer it a bit more in that iterators can be restarted and when that
matters, plus suggest to prefer the locked version whenver.
Also delete the two leftover kerneldoc for static functions plus
sprinkle some more links while at it.
v2: Keep some comments (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20211130152756.1388106-1-daniel.vetter@ffwll.ch
The allow_fb_modifiers flag is unnecessary since it has been replaced
with fb_modifiers_not_supported flag.
v3:
- change the order as follows:
1. add fb_modifiers_not_supported flag
2. add default modifiers
3. remove allow_fb_modifiers flag
v5:
- keep a sanity check in plane init func
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-4-etom@igel.co.jp
The LINEAR modifier is advertised as default if a driver doesn't specify
modifiers.
v2:
- rebase to the latest master branch (5.16.0+)
+ "drm/plane: Make format_mod_supported truly optional" patch [1]
[1] https://patchwork.freedesktop.org/patch/467940/?series=98255&rev=3
v3:
- change the order as follows:
1. add fb_modifiers_not_supported flag
2. add default modifiers
3. remove allow_fb_modifiers flag
v5:
- change default_modifiers array from non-static to static
- remove terminator in default_modifiers array
- use ARRAY_SIZE to get the format_modifier_count
- update sanity check in plane init func to use the
fb_modifiers_not_supported
- modify kernel docs
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-3-etom@igel.co.jp
If only linear modifier is advertised, since there are many drivers that
only linear supported, the DRM core should handle this rather than
open-coding in every driver. However, there are legacy drivers such as
radeon that do not support modifiers but infer the actual layout of the
underlying buffer. Therefore, a new flag fb_modifiers_not_supported is
introduced for these legacy drivers, and allow_fb_modifiers is replaced
with this new flag.
v3:
- change the order as follows:
1. add fb_modifiers_not_supported flag
2. add default modifiers
3. remove allow_fb_modifiers flag
- add a conditional disable in amdgpu_dm_plane_init()
v4:
- modify kernel docs
v5:
- modify kernel docs
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-2-etom@igel.co.jp
Jakub Sitnicki says:
====================
This is a follow-up to discussion around the idea of making dst_port in struct
bpf_sock a 16-bit field that happened in [1].
v2:
- use an anonymous field for zero padding (Alexei)
v1:
- keep dst_field offset unchanged to prevent existing BPF program breakage
(Martin)
- allow 8-bit loads from dst_port[0] and [1]
- add test coverage for the verifier and the context access converter
[1] https://lore.kernel.org/bpf/87sftbobys.fsf@cloudflare.com/
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add coverage to the verifier tests and tests for reading bpf_sock fields to
ensure that 32-bit, 16-bit, and 8-bit loads from dst_port field are allowed
only at intended offsets and produce expected values.
While 16-bit and 8-bit access to dst_port field is straight-forward, 32-bit
wide loads need be allowed and produce a zero-padded 16-bit value for
backward compatibility.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-3-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Menglong Dong reports that the documentation for the dst_port field in
struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the
field is a zero-padded 16-bit integer in network byte order. The value
appears to the BPF user as if laid out in memory as so:
offsetof(struct bpf_sock, dst_port) + 0 <port MSB>
+ 8 <port LSB>
+16 0x00
+24 0x00
32-, 16-, and 8-bit wide loads from the field are all allowed, but only if
the offset into the field is 0.
32-bit wide loads from dst_port are especially confusing. The loaded value,
after converting to host byte order with bpf_ntohl(dst_port), contains the
port number in the upper 16-bits.
Remove the confusion by splitting the field into two 16-bit fields. For
backward compatibility, allow 32-bit wide loads from offsetof(struct
bpf_sock, dst_port).
While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.
Reported-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ACPI core now requires crc32() but the kernel build can fail when
CRC32 is not set/enabled, so select it in the ACPI Kconfig entry.
Fixes this build error:
ia64-linux-ld: drivers/acpi/scan.o: in function `acpi_store_pld_crc':
include/acpi/platform/aclinuxex.h:62: undefined reference to `crc32_le'
Fixes: 882c982dad ("acpi: Store CRC-32 hash of the _PLD in struct acpi_device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All the operands should be tagged `const`.
We're only assigning them to variables so that we can compare them (e.g.
check if left == right, etc.) and avoid evaluating expressions multiple
times.
There's no need for them to be mutable.
Also rename the helper variable `loc` to `__loc` like we do with
`__assertion` and `__strs` to avoid potential name collisions with user
code.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the compiler doesn't optimize them away, each kunit assertion (use of
KUNIT_EXPECT_EQ, etc.) can use 88 bytes of stack space in the worst and
most common case. This has led to compiler warnings and a suggestion
from Linus to move data from the structs into static const's where
possible [1].
This builds upon [2] which did so for the base struct kunit_assert type.
That only reduced sizeof(struct kunit_binary_assert) from 88 to 64.
Given these are by far the most commonly used asserts, this patch
factors out the textual representations of the operands and comparator
into another static const, saving 16 more bytes.
In detail, KUNIT_EXPECT_EQ(test, 2 + 2, 5) yields the following struct
(struct kunit_binary_assert) {
.assert = <struct kunit_assert>,
.operation = "==",
.left_text = "2 + 2",
.left_value = 4,
.right_text = "5",
.right_value = 5,
}
After this change
static const struct kunit_binary_assert_text __text = {
.operation = "==",
.left_text = "2 + 2",
.right_text = "5",
};
(struct kunit_binary_assert) {
.assert = <struct kunit_assert>,
.text = &__text,
.left_value = 4,
.right_value = 5,
}
This also DRYs the code a bit more since these str fields were repeated
for the string and pointer versions of kunit_binary_assert.
Note: we could name the kunit_binary_assert_text fields left/right
instead of left_text/right_text. But that would require changing the
macros a bit since they have args called "left" and "right" which would
be substituted in `.left = #left` as `.2 + 2 = \"2 + 2\"`.
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
[2] https://lore.kernel.org/linux-kselftest/20220113165931.451305-6-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We currently have 2 other versions of KUNIT_INIT_BINARY_ASSERT_STRUCT.
The only differences are that
* the format funcition they pass is different
* the types of left_val/right_val should be different (integral,
pointer, string).
The latter doesn't actually matter since these macros are just plumbing
them along to KUNIT_ASSERTION where they will get type checked.
So combine them all into a single KUNIT_INIT_BINARY_ASSERT_STRUCT that
now also takes the format function as a parameter.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The concern is that having a lot of redundant fields in kunit_assert can
blow up stack usage if the compiler doesn't optimize them away [1].
The comment on this field implies that it was meant to be initialized
when the expect/assert was declared, but this only happens when we run
kunit_do_failed_assertion().
We don't need to access it outside of that function, so move it out of
the struct and make it a local variable there.
This change also takes the chance to reduce the number of macros by
inlining the now simplified KUNIT_INIT_ASSERT_STRUCT() macro.
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This field is only used to pass along the parsed Test object from
parse_tests().
Everywhere else the `result` field is ignored.
Instead make parse_tests() explicitly return a KunitResult and Test so
we can retire the `result` field.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
rcs_engine_wa_init() has a local 'i915' variable; we should use that
rather than 'engine->i915' for consistency with how we handle other
platforms.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128170125.4121819-1-matthew.d.roper@intel.com
We currently use ->cmd_per_lun as initial queue depth for setting up the
budget_map. Martin Wilck reported that it is common for the queue_depth to
be subsequently updated in slave_configure() based on detected hardware
characteristics.
As a result, for some drivers, the static host template settings for
cmd_per_lun and can_queue won't actually get used in practice. And if the
default values are used to allocate the budget_map, memory may be consumed
unnecessarily.
Fix the issue by reallocating the budget_map after ->slave_configure()
returns. At that time the device queue_depth should accurately reflect what
the hardware needs.
Link: https://lore.kernel.org/r/20220127153733.409132-1-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Martin Wilck <martin.wilck@suse.com>
Suggested-by: Martin Wilck <martin.wilck@suse.com>
Tested-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().
Fixes: d0bcacd0a1 ("ixgbe: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: d0bcacd0a1 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
