When the system shuts down or warm reboots, the display may be active.
Implement the platform_driver .shutdown() operation and shut down the
display.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220101213755.506404-1-marex@denx.de
When the device is unbound from the driver, the display may be active.
Make sure it gets shut down.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211231160056.302276-1-marex@denx.de
Add compatible string for TI DS90CF364A, which is another LVDS to DPI
decoder similar to DS90CF384A, except it is using smaller package and
only provides 18bit DPI bus.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211218152309.256183-1-marex@denx.de
Add a TODO item about requesting memory regions for each driver. The
current DRM drivers don't do this consistently.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-6-tzimmermann@suse.de
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* store memory region in struct for later cleanup (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-5-tzimmermann@suse.de
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* use I/O memory if request_mem_region() fails (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-4-tzimmermann@suse.de
The sysfb_create_simplefb() function requests a IO memory resource for the
simple-framebuffer platform device, but it also marks it as busy which can
lead to drivers requesting the same memory resource to fail.
Let's drop the IORESOURCE_BUSY flag and let drivers to request it as busy
instead.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-3-tzimmermann@suse.de
Hot-unplug all firmware-framebuffer devices as part of removing
them via remove_conflicting_framebuffers() et al. Releases all
memory regions to be acquired by native drivers.
Firmware, such as EFI, install a framebuffer while posting the
computer. After removing the firmware-framebuffer device from fbdev,
a native driver takes over the hardware and the firmware framebuffer
becomes invalid.
Firmware-framebuffer drivers, specifically simplefb, don't release
their device from Linux' device hierarchy. It still owns the firmware
framebuffer and blocks the native drivers from loading. This has been
observed in the vmwgfx driver. [1]
Initiating a device removal (i.e., hot unplug) as part of
remove_conflicting_framebuffers() removes the underlying device and
returns the memory range to the system.
[1] https://lore.kernel.org/dri-devel/20220117180359.18114-1-zack@kde.org/
v2:
* rename variable 'dev' to 'device' (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@vger.kernel.org # v5.11+
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-2-tzimmermann@suse.de
The file now rightfully throws up a big warning that it should never be
included, so remove it from the header_check test.
Fixes: f23653fe64 ("tty: Partially revert the removal of the Cyclades public API")
Cc: stable <stable@vger.kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: "Maciej W. Rozycki" <macro@embecosm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220127073304.42399-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harry's e-mail address from Cascoda bounces, I have not found any
contributions from him since 2018 so let's drop the Maintainer entry
from the CA8210 driver and mark it Orphan.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Returning -1 does not indicate anything useful.
Use a standard and meaningful error code instead.
Fixes: a26c5fd762 ("nl802154: add support for security layer")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.
Free the skb structure upon error before returning.
Fixes: ded845a781 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. In the Tx case we then leak
the skb structure.
Free the skb structure upon error before returning when appropriate.
As the 'is_tx = 0' cannot be moved in the complete handler because of a
possible race between the delay in switching to STATE_RX_AACK_ON and a
new interrupt, we introduce an intermediate 'was_tx' boolean just for
this purpose.
There is no Fixes tag applying here, many changes have been made on this
area and the issue kind of always existed.
Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with phy->symbol_duration in order to get these
values in microseconds.
Fixes: 8c6ad9cc51 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Drivers are expected to set the PHY current_channel and current_page
according to their default state. The hwsim driver is advertising being
configured on channel 13 by default but that is not reflected in its own
internal pib structure. In order to ensure that this driver consider the
current channel as being 13 internally, we at least need to set the
pib->channel field to 13.
Fixes: f25da51fdc ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[stefan@datenfreihafen.org: fixed assigment from page to channel]
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.
Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.
Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fix following coccicheck warning:
./drivers/phy/mediatek/phy-mtk-tphy.c:994:6-29: duplicated argument
to && or ||
The efuse_rx_imp is duplicate. Here should be efuse_tx_imp.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220107025050.787720-1-wanjiabing@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit b515d26372.
Commit b515d26372 ("xfrm: xfrm_state_mtu
should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS
calculation in ipsec transport mode, resulting complete stalls of TCP
connections. This happens when the (P)MTU is 1280 or slighly larger.
The desired formula for the MSS is:
MSS = (MTU - ESP_overhead) - IP header - TCP header
However, the above commit clamps the (MTU - ESP_overhead) to a
minimum of 1280, turning the formula into
MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header
With the (P)MTU near 1280, the calculated MSS is too large and the
resulting TCP packets never make it to the destination because they
are over the actual PMTU.
The above commit also causes suboptimal double fragmentation in
xfrm tunnel mode, as described in
https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/
The original problem the above commit was trying to fix is now fixed
by commit 6596a02295 ("xfrm: fix MTU
regression").
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use reset_control_rearm() call if an error occurs in case
phy_meson8b_usb2_power_on() fails after reset() has been called, or in
case phy_meson8b_usb2_power_off() is called i.e the resource is no longer
used and the reset line may be triggered again by other devices.
reset_control_rearm() keeps use of triggered_count sane in the reset
framework, use of reset_control_reset() on shared reset line should
be balanced with reset_control_rearm().
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220111095255.176141-4-aouledameur@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the existing dev_err_probe() helper instead of open-coding the same
operation.
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220111095255.176141-3-aouledameur@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use reset_control_rearm() call if an error occurs in case
phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case
phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used
and the reset line may be triggered again by other devices.
reset_control_rearm() keeps use of triggered_count sane in the reset
framework. Therefore, use of reset_control_reset() on shared reset line
should be balanced with reset_control_rearm().
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220111095255.176141-2-aouledameur@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Freescale/NXP i.MX8 USB3, MIPI DSI, and PCIE PHYs are only present
on the NXP i.MX8 family of SoCs. Hence wrap the config symbols for
these PHYs inside a check for ARCH_MXC && ARM64, to prevent asking the
user about these drivers when configuring a kernel without NXP i.MX SoC
family support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://lore.kernel.org/r/393868affd830016d35f0d9aba32ccd7098c8073.1641987369.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the compatible string used for the qusb2 phy in msm8953.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220112194118.178026-2-luca@z3ntu.xyz
Signed-off-by: Vinod Koul <vkoul@kernel.org>
TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with
separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was
not preserving the existing register value for other lanes, so enabling
the PHY in SGMII mode on one lane zeroed out the settings for all other
lanes, causing other PS-GTR peripherals such as USB3 to malfunction.
Use xpsgtr_clr_set to only manipulate the desired bits in the register.
Fixes: 4a33bea003 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove two dead stubs, sk_msg_clear_meta() was never
used, use of xskq_cons_is_full() got replaced by
xsk_tx_writeable() in v5.10.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220126185412.2776254-1-kuba@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix how selftests determine relative offset of a function that is
uprobed. Previously, there was an assumption that uprobed function is
always in the first executable region, which is not always the case
(libbpf CI hits this case now). So get_base_addr() approach in isolation
doesn't work anymore. So teach get_uprobe_offset() to determine correct
memory mapping and calculate uprobe offset correctly.
While at it, I merged together two implementations of
get_uprobe_offset() helper, moving powerpc64-specific logic inside (had
to add extra {} block to avoid unused variable error for insn).
Also ensured that uprobed functions are never inlined, but are still
static (and thus local to each selftest), by using a no-op asm volatile
block internally. I didn't want to keep them global __weak, because some
tests use uprobe's ref counter offset (to test USDT-like logic) which is
not compatible with non-refcounted uprobe. So it's nicer to have each
test uprobe target local to the file and guaranteed to not be inlined or
skipped by the compiler (which can happen with static functions,
especially if compiling selftests with -O2).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220126193058.3390292-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update comments to only use kdoc style comments, starting with '/**',
for kdoc.
Flagged by ./scripts/kernel-doc
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220126090803.5582-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leo Yan says:
====================
pid: Introduce helper task_is_in_root_ns()
This patch series introduces a helper function task_is_in_init_pid_ns()
to replace open code. The two patches are extracted from the original
series [1] for network subsystem.
As a plan, we can firstly land this patch set into kernel 5.18; there
have 5 patches are left out from original series [1], as a next step,
I will resend them for appropriate linux-next merging.
[1] https://lore.kernel.org/lkml/20211208083320.472503-1-leo.yan@linaro.org/
====================
Link: https://lore.kernel.org/r/20220126050427.605628-1-leo.yan@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch replaces open code with task_is_in_init_pid_ns() to check if
a task is in root PID namespace.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the kernel uses open code in multiple places to check if a
task is in the root PID namespace with the kind of format:
if (task_active_pid_ns(current) == &init_pid_ns)
do_something();
This patch creates a new helper function, task_is_in_init_pid_ns(), it
returns true if a passed task is in the root PID namespace, otherwise
returns false. So it will be used to replace open codes.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
Fixes: f5cedc84a3 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Link: https://lore.kernel.org/r/20220126003843.3584521-1-awogbemila@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In __pata_platform_probe(), devm_kzalloc() is assigned to ap->ops and
there is a dereference of it right after that, which could introduce a
NULL pointer dereference bug.
Fix this by adding a NULL check of ap->ops.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: f3d5e4f18d ("ata: pata_of_platform: Allow to use 16-bit wide data transfer")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
When the ucount code was refactored to create get_ucount it was missed
that some of the contexts in which a rlimit is kept elevated can be
the only reference to the user/ucount in the system.
Ordinary ucount references exist in places that also have a reference
to the user namspace, but in POSIX message queues, the SysV shm code,
and the SIGPENDING code there is no independent user namespace
reference.
Inspection of the the user_namespace show no instance of circular
references between struct ucounts and the user_namespace. So
hold a reference from struct ucount to i's user_namespace to
resolve this problem.
Link: https://lore.kernel.org/lkml/YZV7Z+yXbsx9p3JN@fixkernel.com/
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Fixes: d646969055 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Fixes: 6e52a9f053 ("Reimplement RLIMIT_MSGQUEUE on top of ucounts")
Fixes: d7c9e99aee ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add a specific test for the reload issue fixed with
commit 23c54263ef ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").
Add to set, then flush set content + restore without other add/remove in
the transaction.
On kernels before the fix, this test case fails:
net,mac with reload [FAIL]
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cancel tracking for byteorder operation, otherwise selector + byteorder
operation is incorrectly reduced if source and destination registers are
the same.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prior to commit fa538f7cf0 ("netfilter: nf_reject: add reject skbuff
creation helpers"), nft_reject_bridge did not assign to nskb->dev before
passing nskb on to br_forward(). The shared skbuff creation helpers
introduced in above commit do which seems to confuse br_forward() as
reject statements in prerouting hook won't emit a packet anymore.
Fix this by simply passing NULL instead of 'dev' to the helpers - they
use the pointer for just that assignment, nothing else.
Fixes: fa538f7cf0 ("netfilter: nf_reject: add reject skbuff creation helpers")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a test that sends large udp packet (which is fragmented)
via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4'
and check that the datagram is received by peer.
On kernels without
commit 4e1860a386 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")',
this will fail with:
cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)
On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This selftests needs almost 3 minutes to complete, reduce the
insertes zones to 1000. Test now completes in about 20 seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The conversion erroneously removed the refcount increment.
In case we can use the percpu template, we need to increment
the refcount, else it will be released when the skb gets freed.
In case the slowpath is taken, the new template already has a
refcount of 1.
Fixes: 7197743776 ("netfilter: conntrack: convert to refcount_t api")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
