If of_find_device_by_node() succeeds, dsi_get_phy() doesn't
a corresponding put_device(). Thus add put_device() to fix the exception
handling.
Fixes: ec31abf ("drm/msm/dsi: Separate PHY to another platform device")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211230070943.18116-1-linmq006@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The code that uses variable mdss has been removed, So the declaration
and assignment of the variable can be removed.
Eliminate the following clang warning:
drivers/gpu/drm/msm/msm_drv.c:513:19: warning: variable 'mdss' set but
not used [-Wunused-but-set-variable]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 2027e5b341 ("drm/msm: Initialize MDSS irq domain at probe time")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211216031103.34146-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
When one of the three connection complete events is received multiple
times for the same handle, the device is registered multiple times which
leads to memory corruptions. Therefore, consequent events for a single
connection are ignored.
The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET
is introduced to identify new connections. To make sure the events do not
contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks
are introduced.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Merge series from Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>:
Hi All,
This patch series does code cleanup and fixes to the rz-ssi driver.
Cheers,
Prabhakar
Lad Prabhakar (5):
ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively
ASoC: sh: rz-ssi: Make the data structures available before
registering the handlers
ASoC: sh: rz-ssi: Drop ssi parameter from rz_ssi_stream_init()
ASoC: sh: rz-ssi: Make return type of rz_ssi_stream_is_valid() to bool
ASoC: sh: rz-ssi: Add functions to get/set substream pointer
sound/soc/sh/rz-ssi.c | 147 ++++++++++++++++++++++++------------------
1 file changed, 86 insertions(+), 61 deletions(-)
--
2.17.1
Merge series from Robert Hancock <robert.hancock@calian.com>:
There are drivers in mainline for the Xilinx Audio Formatter and Xilinx
I2S IP cores. However, because of a few issues, these were only really
usable with Xilinx's xlnx_pl_snd_card top-level driver, which is not in
mainline (and not suitable for mainline).
The fixes in this patchset, for the simple-card layer as well as the
Xilinx drivers, now allow these drivers to be properly used with
simple-card without any out-of-tree support code.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
After the first firmware boot, the firmware is capable of
saving/restoring its context to/from IMR (Isolated Memory Region, set
aside by BIOS on startup). This capability improves the resume speed.
Due to an unexplained issue on Up2 boards, this capability is disabled
on ApolloLake.
For backwards compatibility, the regular boot flow is used with older
firmware. For added peace of mind, a kernel module parameter is
provided to force the regular boot flow - this shouldn't be necessary
since we've been testing these patches for 6+ months.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Following series performs few cleanups in topology code.
First patch reduces number of prints we get from failure.
Second allos TLV controls to be either read or write which should be
possible as evidenced by further code in function.
Last one cleanups after refactoring of memory handling.
v2:
- Add missing Fixes tag on second patch
- Add Reviewed-by tag from Pierre
Amadeusz Sławiński (3):
ASoC: topology: Remove superfluous error prints
ASoC: topology: Allow TLV control to be either read or write
ASoC: topology: Optimize soc_tplg_dapm_graph_elems_load behavior
sound/soc/soc-topology.c | 103 ++++++++++-----------------------------
1 file changed, 27 insertions(+), 76 deletions(-)
--
2.25.1
It needs to assign sbi->gc_mode with GC_IDLE_AT rather than GC_AT when
user tries to enable ATGC via gc_idle sysfs interface, fix it.
Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Cc: Zhipeng Tan <tanzhipeng@hust.edu.cn>
Signed-off-by: Jicheng Shao <shaojicheng@hust.edu.cn>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs rw_semaphores work better if writers can starve readers,
especially for the checkpoint thread, because writers are strictly
more important than reader threads. This prevents significant priority
inversion between low-priority readers that blocked while trying to
acquire the read lock and a second acquisition of the write lock that
might be blocking high priority work.
Signed-off-by: Tim Murray <timmurray@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Test various parts of the clk gate implementation with the kunit testing
framework.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Cc: <kunit-dev@googlegroups.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220120175902.2165958-1-sboyd@kernel.org
The warning that a clock operation failed is only printed once. However,
the function is called for various different clocks. The limit hides the
warnings if different clocks are affected by the failures.
The clock ops might fail if the firmware that handles the clocks is
misconfigured. Therefore, replace the pr_warn_once with pr_debug to
allow the user to see all errors if necessary. By default, hide the
error messages and let drivers handle the errors.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/20220119115434.2042017-1-m.tretter@pengutronix.de
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pass parent_data to ETHRX clock with new fw_name = "ETH_RX_CLK/ETH_REF_CLK".
By default, this change has no impact on the operation of the clock driver.
However, due to the fw_name, it permits DT to override ETHRX clock parent,
which might be needed in case the ETHRX clock are supplied by external clock
source.
Example of MCO2 supplying clock to ETH_RX_CLK via external pad-to-pad wire:
&rcc {
clocks = <&rcc CK_MCO2>;
clock-names = "ETH_RX_CLK/ETH_REF_CLK";
};
Note that while this patch permits to implement this rare usecase, the issue
with ethernet RX and TX input clock modeling on MP1 is far more complex and
requires more core plumbing.
[1] STM32MP1 Reference Manual RM0436 Rev 3, Page 574,
Figure 83. Peripheral clock distribution for Ethernet
https://www.st.com/resource/en/reference_manual/dm00327659-stm32mp157-advanced-armbased-32bit-mpus-stmicroelectronics.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Link: https://lore.kernel.org/r/20220118202958.1840431-2-marex@denx.de
Tested-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The ETHCK_K are modeled as composite clock of MUX and GATE, however per
STM32MP1 Reference Manual RM0436 Rev 3, Page 574, Figure 83. Peripheral
clock distribution for Ethernet, ETHPTPDIV divider is attached past the
ETHCK_K mux, and ETH_CLK/eth_clk_fb clock are output past ETHCKEN gate.
Therefore, in case ETH_CLK/eth_clk_fb are not in use AND PTP clock are
in use, ETHCKEN gate can be turned off. Current driver does not permit
that, fix it.
This patch converts ETHCK_K from composite clock into a ETHCKEN gate,
ETHPTP_K from composite clock into ETHPTPDIV divider, and adds another
NO_ID clock "ck_ker_eth" which models the ETHSRC mux and is parent clock
to both ETHCK_K and ETHPTP_K. Therefore, all references to ETHCK_K and
ETHPTP_K remain functional as before.
[1] STM32MP1 Reference Manual RM0436 Rev 3, Page 574,
Figure 83. Peripheral clock distribution for Ethernet
https://www.st.com/resource/en/reference_manual/dm00327659-stm32mp157-advanced-armbased-32bit-mpus-stmicroelectronics.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Link: https://lore.kernel.org/r/20220118202958.1840431-1-marex@denx.de
Tested-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use
true or false instead of 1/0.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variable val is being initialized with a value that is never read,
it is being re-assigned later. The assignment is redundant and
can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20220123184936.113486-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variable reg is being masked however the variable is never read
after this. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220123184035.112785-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCK1 feeds the External Bus Interface (EBI). EBI's clock rate is used
to translate EBI's timmings to SMC timings, thus we need to handle MCK1
in the EBI driver. Allow MCK1 to be referenced as a PMC_TYPE_CORE clock
from phandle in DT.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220111125310.902856-1-tudor.ambarus@microchip.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make AUDIOPINCK accessible via phandle to select it
as peripheral clock parent using assigned-clock-parents in DT
where available.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Claudiu Beznea <Claudiu.Beznea@microchip.com>
Link: https://lore.kernel.org/r/20220111142051.37957-1-admin@hifiphile.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the following coccicheck warning:
drivers/clk/clk-si5341.c:1471: WARNING: use scnprintf or sprintf.
drivers/clk/clk-si5341.c:1486: WARNING: use scnprintf or sprintf.
drivers/clk/clk-si5341.c:1501: WARNING: use scnprintf or sprintf.
drivers/clk/clk-si5341.c:1516: WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1634280331-4150-1-git-send-email-wangqing@vivo.com
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SI5341_OUT_CFG_RDIV_FORCE2 shall be checked first to distinguish whether
a divider for a given output is set to 2 (SI5341_OUT_CFG_RDIV_FORCE2
is set) or the output is disabled (SI5341_OUT_CFG_RDIV_FORCE2 not set,
SI5341_OUT_R_REG is set 0).
Before the change, divider set to 2 (SI5341_OUT_R_REG set to 0) was
interpreted as output is disabled.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Link: https://lore.kernel.org/r/20211203141125.2447520-1-dev_public@wujek.eu
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
BCM4908 has its own pins layout so it needs a custom binding and a Linux
driver.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's hardware block that is part of every SoC from BCM4908 family.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220124102243.14912-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-01-24
We've added 80 non-merge commits during the last 14 day(s) which contain
a total of 128 files changed, 4990 insertions(+), 895 deletions(-).
The main changes are:
1) Add XDP multi-buffer support and implement it for the mvneta driver,
from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen.
2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc
infra, from Kumar Kartikeya Dwivedi.
3) Extend BPF cgroup programs to export custom ret value to userspace via
two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu.
4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima.
5) Complete missing UAPI BPF helper description and change bpf_doc.py script
to enforce consistent & complete helper documentation, from Usama Arif.
6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to
follow tc-based APIs, from Andrii Nakryiko.
7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu.
8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters
and setters, from Christy Lee.
9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to
reduce overhead, from Kui-Feng Lee.
10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new()
utility function, from Mauricio Vásquez.
11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau.
12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits)
selftests, bpf: Do not yet switch to new libbpf XDP APIs
selftests, xsk: Fix rx_full stats test
bpf: Fix flexible_array.cocci warnings
xdp: disable XDP_REDIRECT for xdp frags
bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags
bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest
net: xdp: introduce bpf_xdp_pointer utility routine
bpf: generalise tail call map compatibility check
libbpf: Add SEC name for xdp frags programs
bpf: selftests: update xdp_adjust_tail selftest to include xdp frags
bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature
bpf: introduce frags support to bpf_prog_test_run_xdp()
bpf: move user_size out of bpf_test_init
bpf: add frags support to xdp copy helpers
bpf: add frags support to the bpf_xdp_adjust_tail() API
bpf: introduce bpf_xdp_get_buff_len helper
net: mvneta: enable jumbo frames if the loaded XDP program support frags
bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program
net: mvneta: add frags support to XDP_TX
xdp: add frags support to xdp_return_{buff/frame}
...
====================
Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't leak a reference to the key if its algorithm is unknown.
Fixes: 947d705972 ("ima: Support EC keys for signature verification")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Paweł Marciniak reports the following crash, observed when clearing
the chassis intrusion alarm.
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018
RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775]
Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ...
RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68
RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a
R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f
R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0
FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0
Call Trace:
<TASK>
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x10b/0x180
vfs_write+0x209/0x2a0
ksys_write+0x4f/0xc0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The problem is that the device passed to clear_caseopen() is the hwmon
device, not the platform device, and the platform data is not set in the
hwmon device. Store the pointer to sio_data in struct nct6775_data and
get if from there if needed.
Fixes: 2e7b988696 ("hwmon: (nct6775) Use superio_*() function pointers in sio_data.")
Cc: Denis Pauk <pauk.denis@gmail.com>
Cc: Bernhard Seibold <mail@bernhard-seibold.de>
Reported-by: Paweł Marciniak <pmarciniak@lodz.home.pl>
Tested-by: Denis Pauk <pauk.denis@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Revert commit 544356524d ("selftests/bpf: switch to new libbpf XDP APIs")
for now given this will heavily conflict with 4b27480dca ("bpf/selftests:
convert xdp_link test to ASSERT_* macros") upon merge. Andrii agreed to redo
the conversion cleanly after trees merged.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmHu4c0THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqcJOB/0eZ4URSNZ1sf1LWYbKs+DAtr08R6Hf
xmjyNsefFCFbTwLC2OESfv51b/eZR0Bt9ZxqfuYmS63TSUUwCTNHMj/sSvKqWX/e
LzsNezz5A/8rsLjhIZALVWgunjOZxq45oXtMzmv5kswSAEjy0TOQLo4zki3/YxtA
ULfNJ9zpKtzkFr7OEM5uNU8VN1e5ioMiOclHZVMFL20pR6QOS4lvG+P+Or5lmUAE
Hb/sChOF6yqgeKGk3ErBL5VregphxgPTYF5G7PlyOidYaB9VjCPjTzPlJ9/L2hdS
mmQB0Ev2ChgKgCuAFt/R/JtNiZ6/a2tzTxDYxjQcDbP+kRjUNb3Tgcyx
=iMRA
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.17-20220124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-01-24
The first patch updates the email address of Brian Silverman from his
former employer to his private address.
The next patch fixes DT bindings information for the tcan4x5x SPI CAN
driver.
The following patch targets the m_can driver and fixes the
introduction of FIFO bulk read support.
Another patch for the tcan4x5x driver, which fixes the max register
value for the regmap config.
The last patch for the flexcan driver marks the RX mailbox support for
the MCF5441X as support.
* tag 'linux-can-fixes-for-5.17-20220124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: flexcan: mark RX via mailboxes as supported on MCF5441X
can: tcan4x5x: regmap: fix max register value
can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0
dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config
mailmap: update email address of Brian Silverman
====================
Link: https://lore.kernel.org/r/20220124175955.3464134-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan reports the group relocations go out of range in pathological
cases such as allyesconfig kernels, which have little chance of actually
booting but are still used in validation.
So add a Kconfig symbol for this feature, and make it depend on
!COMPILE_TEST.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add a new system-clock-fixed flag, which can be used to specify that the
driver cannot or should not allow the clock frequency of the mapped clock
to be modified. This behavior is also implied if the system-clock-frequency
parameter is set explicitly - the flag is meant for cases where a clock is
mapped to the DAI but which is, or should be treated as, fixed.
When mclk-fs is also specified, this causes a PCM constraint to be added
which enforces that only the corresponding valid sample rate can be used.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-7-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the new system-clock-fixed flag, which can be used to specify
that the driver cannot or should not allow the clock frequency of the
mapped clock to be modified.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-6-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an mclk-fs value was provided in the device tree configuration, the
calculated MCLK was fed into the downstream codec DAI and CPU DAI,
however set_sysclk was not being called on the platform device. Some
platform devices such as the Xilinx Audio Formatter need to know the MCLK
as well.
Call snd_soc_component_set_sysclk on each component in the stream to set
the proper sysclk value in addition to the existing call of
snd_soc_dai_set_sysclk on the codec DAI and CPU DAI. This may end up
resulting in redundant calls if one of the snd_soc_dai_set_sysclk calls
ends up calling snd_soc_component_set_sysclk itself, but that isn't
expected to cause any significant harm.
Fixes: f48dcbb6d4 ("ASoC: simple-card-utils: share asoc_simple_hw_param()")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-5-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver previously only handled the set_clkdiv divider callback when
setting the SCLK Out Divider field in the I2S Timing Control register.
However, when using the simple-audio-card driver, the set_sysclk function
is called but not set_clkdiv. This caused the divider not to be set,
leaving it at an invalid value of 0 and resulting in a very low SCLK
output rate.
Handle set_clkdiv and store the sysclk (MCLK) value for later use in
hw_params to set the SCLK Out Divider such that:
MCLK/SCLK = divider * 2
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-4-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An upcoming change will require storing additional driver data other
than the memory base address. Create a drvdata structure and use that
rather than storing the raw base address pointer.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-3-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver did not set the MM2S Fs Multiplier Register to the proper
value for playback streams. This needs to be set to the sample rate to
MCLK multiplier, or random stream underflows can occur on the downstream
I2S transmitter.
Store the sysclk value provided via the set_sysclk callback and use that
in conjunction with the sample rate in the hw_params callback to calculate
the proper value to set for this register.
Fixes: 6f6c3c36f0 ("ASoC: xlnx: add pcm formatter platform driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-2-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On J721s2 Linux console is on main_uart8 but to be consistent with other
J7 family of devices, alias it to ttyS2 (serial2). This also eliminates
need to have higher number of 8250 runtime UARTs.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211223121650.26868-3-vigneshr@ti.com
Aliases are board specific and should be in board dts files.
So, move aliases to board dts and trim the list to interfaces that are
actually enabled.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211223121650.26868-2-vigneshr@ti.com
When onlining a CPU, switch to swapper_pg_dir as soon as possible so
that it is guaranteed that the vmap'ed stack is mapped before it is
used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
While using a plain (constant) address works, its use needlessly invokes
a SIB addressing mode, making every call site one byte larger than
necessary:
ff 14 25 98 89 42 82 call *0xffffffff82428998
Instead of using an "i" constraint with address-of operator and a 'c'
operand modifier, simply use an ordinary "m" constraint, which the
64-bit compiler will translate to %rip-relative addressing:
ff 15 62 fb d2 00 call *0xd2fb62(%rip) # ffffffff82428998 <pv_ops+0x18>
This way the compiler is also told the truth about operand usage - the
memory location gets actually read, after all.
32-bit code generation is unaffected by the change.
[ bp: Remove "we", add examples. ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/b8192e8a-13ef-6ac6-6364-8ba58992cd1d@suse.com
On GCC 12, the build fails due to a possible truncated string:
check.c: In function 'validate_call':
check.c:2865:58: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
2865 | snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);
| ^~
In theory it's a valid bug:
static char pvname[16];
int idx;
...
idx = (rel->addend / sizeof(void *));
snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);
There are only 7 chars for %d while it could take up to 9, so the
printed "pv_ops[%d]" string could get truncated.
In reality the bug should never happen, because pv_ops only has ~80
entries, so 7 chars for the integer is more than enough. Still, it's
worth fixing. Bump the buffer size by 2 bytes to silence the warning.
[ jpoimboe: changed size to 19; massaged changelog ]
Fixes: db2b0c5d7b ("objtool: Support pv_opsindirect calls for noinstr")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Reported-by: Martin Liška <mliska@suse.cz>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220120233748.2062559-1-slyich@gmail.com
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox
The flexcan IP core on the MCF5441X cannot receive CAN RTR messages
via mailboxes. However the mailbox mode is more performant. The commit
| 1c45f5778a ("can: flexcan: add ethtool support to change rx-rtr setting during runtime")
added support to switch from FIFO to mailbox mode on these cores.
After testing the mailbox mode on the MCF5441X by Angelo Dureghello,
this patch marks it (without RTR capability) as supported. Further the
IP core overview table is updated, that RTR reception via mailboxes is
not supported.
Link: https://lore.kernel.org/all/20220121084425.3141218-1-mkl@pengutronix.de
Tested-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The MRAM of the tcan4x5x has a size of 2K and starts at 0x8000. There
are no further registers in the tcan4x5x making 0x87fc the biggest
addressable register.
This patch fixes the max register value of the regmap config from
0x8ffc to 0x87fc.
Fixes: 6e1caaf8ed ("can: tcan4x5x: fix max register value")
Link: https://lore.kernel.org/all/20220119064011.2943292-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In order to optimize FIFO access, especially on m_can cores attached
to slow busses like SPI, in patch
| e39381770e ("can: m_can: Disable IRQs on FIFO bus errors")
bulk read/write support has been added to the m_can_fifo_{read,write}
functions.
That change leads to the tcan driver to call
regmap_bulk_{read,write}() with a length of 0 (for CAN frames with 0
data length). regmap treats this as an error:
| tcan4x5x spi1.0 tcan4x5x0: FIFO write returned -22
This patch fixes the problem by not calling the
cdev->ops->{read,write)_fifo() in case of a 0 length read/write.
Fixes: e39381770e ("can: m_can: Disable IRQs on FIFO bus errors")
Link: https://lore.kernel.org/all/20220114155751.2651888-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Cc: Matt Kline <matt@bitbashing.io>
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Reported-by: Michael Anochin <anochin@photo-meter.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This tcan4x5x only comes with 2K of MRAM, a RX FIFO with a dept of 32
doesn't fit into the MRAM. Use a depth of 16 instead.
Fixes: 4edd396a19 ("dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver")
Link: https://lore.kernel.org/all/20220119062951.2939851-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Brian Silverman's address at bluerivertech.com is not valid anymore,
use Brian's private email address instead.
Link: https://lore.kernel.org/all/20220110082359.2019735-1-mkl@pengutronix.de
Cc: Brian Silverman <bsilver16384@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When starting a defrag, we should update the writeback index of the
inode's mapping in case it currently has a value beyond the start of the
range we are defragging. This can help performance and often result in
getting less extents after writeback - for e.g., if the current value
of the writeback index sits somewhere in the middle of a range that
gets dirty by the defrag, then after writeback we can get two smaller
extents instead of a single, larger extent.
We used to have this before the refactoring in 5.16, but it was removed
without any reason to do so. Originally it was added in kernel 3.1, by
commit 2a0f7f5769 ("Btrfs: fix recursive auto-defrag"), in order to
fix a loop with autodefrag resulting in dirtying and writing pages over
and over, but some testing on current code did not show that happening,
at least with the test described in that commit.
So add back the behaviour, as at the very least it is a nice to have
optimization.
Fixes: 7b508037d4 ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()")
CC: stable@vger.kernel.org # 5.16
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the initial devicetree for mt8192 was added in 48489980e2 ("arm64:
dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile"), the
clock driver for mt8192 was not yet upstream, so the clock property nodes
were set to the clk26m clock as a placeholder.
Given that the clock driver has since been added through 710573dee3 ("clk:
mediatek: Add MT8192 basic clocks support"), as well as its dt-bindings
through f35f1a23e0 ("clk: mediatek: Add dt-bindings of MT8192 clocks") and
devicetree nodes through 5d2b897bc6 ("arm64: dts: mediatek: Add mt8192
clock controllers"), fix the systimer clock property to point to the actual
clock.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220113065822.11809-6-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When the initial devicetree for mt8192 was added in 48489980e2 ("arm64:
dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile"), the
clock driver for mt8192 was not yet upstream, so the clock property nodes
were set to the clk26m clock as a placeholder.
Given that the clock driver has since been added through 710573dee3 ("clk:
mediatek: Add MT8192 basic clocks support"), as well as its dt-bindings
through f35f1a23e0 ("clk: mediatek: Add dt-bindings of MT8192 clocks") and
devicetree nodes through 5d2b897bc6 ("arm64: dts: mediatek: Add mt8192
clock controllers"), fix the I2C clock property to point to the actual
clock.
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220113065822.11809-5-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
