The return value of kcalloc() needs to be checked.
To avoid dereference of null pointer in case of the failure of alloc.
Therefore, it might be better to change the return type of
qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and
return 0 the others.
Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable()
should deal with the return value of qlcnic_sriov_alloc_vlans().
Fixes: 154d0c810c ("qlcnic: VLAN enhancement for 84XX adapters")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xdp_rxq_info_unreg() called by xdp_rxq_info_reg() is meaningless when
dev is NULL, so move the if dev statements to the first.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing cleanup routine implementation is not well synchronized
with the syscall routine. When a device is detaching, below race could
occur.
static int ax25_sendmsg(...) {
...
lock_sock()
ax25 = sk_to_ax25(sk);
if (ax25->ax25_dev == NULL) // CHECK
...
ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE
...
}
static void ax25_kill_by_device(...) {
...
if (s->ax25_dev == ax25_dev) {
s->ax25_dev = NULL;
...
}
Other syscall functions like ax25_getsockopt, ax25_getname,
ax25_info_show also suffer from similar races. To fix them, this patch
introduce lock_sock() into ax25_kill_by_device in order to guarantee
that the nullify action in cleanup routine cannot proceed when another
socket request is pending.
Signed-off-by: Hanjie Wu <nagi@zju.edu.cn>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit 3e0588c291 ("hamradio: defer ax25 kfree after
unregister_netdev") reorder the kfree operations and unregister_netdev
operation to prevent UAF.
This commit improves the previous one by also deferring the nullify of
the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs.
Partial of the stack trace is shown below.
BUG: kernel NULL pointer dereference, address: 0000000000000538
RIP: 0010:ax_xmit+0x1f9/0x400
...
Call Trace:
dev_hard_start_xmit+0xec/0x320
sch_direct_xmit+0xea/0x240
__qdisc_run+0x166/0x5c0
__dev_queue_xmit+0x2c7/0xaf0
ax25_std_establish_data_link+0x59/0x60
ax25_connect+0x3a0/0x500
? security_socket_connect+0x2b/0x40
__sys_connect+0x96/0xc0
? __hrtimer_init+0xc0/0xc0
? common_nsleep+0x2e/0x50
? switch_fpu_return+0x139/0x1a0
__x64_sys_connect+0x11/0x20
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The crash point is shown as below
static void ax_encaps(...) {
...
set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL!
...
}
By placing the nullify action after the unregister_netdev, the ax->tty
pointer won't be assigned as NULL net_device framework layer is well
synchronized.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2021-12-17
Brett Creeley says:
This patch series adds support in the iavf driver for communicating and
using VIRTCHNL_VF_OFFLOAD_VLAN_V2. The current VIRTCHNL_VF_OFFLOAD_VLAN
is very limited and covers all 802.1Q VLAN offloads and filtering with
no granularity.
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 adds more granularity, flexibility,
and support for 802.1ad offloads and filtering. This includes the VF
negotiating which VLAN offloads/filtering it's allowed, where VLAN tags
should be inserted and/or stripped into and from descriptors, and the
supported VLAN protocols.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-17
Maciej Fijalkowski says:
It seems that previous [0] Rx fix was not enough and there are still
issues with AF_XDP Rx ZC support in ice driver. Elza reported that for
multiple XSK sockets configured on a single netdev, some of them were
becoming dead after a while. We have spotted more things that needed to
be addressed this time. More of information can be found in particular
commit messages.
It also carries Alexandr's patch that was sent previously which was
overlapping with this set.
[0]: https://lore.kernel.org/bpf/20211129231746.2767739-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed commit attempts to get the output file descriptor even if the
file was never opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__GI___fileno (fp=0x0) at fileno.c:35
35 fileno.c: No such file or directory.
(gdb) bt
#0 __GI___fileno (fp=0x0) at fileno.c:35
#1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72
#2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69
#3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017
#4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313
#5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539
(gdb)
Fixes: 0ae0389362 ("perf tools: Pass a fd to perf_file_header__read_pipe()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fixed commit attempts to close inject.output even if it was never
opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
48 iofclose.c: No such file or directory.
(gdb) bt
#0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
#1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376
#2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085
#3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313
#4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539
(gdb)
Fixes: 02e6246f53 ("perf inject: Close inject.output on exit")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc()
fails, add IS_ERR() checking for ctx->ids.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com
[ s/kfree()/free()/ and add missing linux/err.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently added Samsung Exynos USI driver devicetree bindings were added
under ../bindings/soc/samsung/exynos-usi.yaml, so move there also two
other bindings for Exynos SoC drivers: the PMU and ChipID.
Update Samsung Exynos MAINTAINERS entry to include this new path.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211213112057.16709-1-krzysztof.kozlowski@canonical.com
USIv2 IP-core is found on modern ARM64 Exynos SoCs (like Exynos850) and
provides selectable serial protocol (one of: UART, SPI, I2C). USIv2
registers usually reside in the same register map as a particular
underlying protocol it implements, but have some particular offset. E.g.
on Exynos850 the USI_UART has 0x13820000 base address, where UART
registers have 0x00..0x40 offsets, and USI registers have 0xc0..0xdc
offsets. Desired protocol can be chosen via SW_CONF register from System
Register block of the same domain as USI.
Before starting to use a particular protocol, USIv2 must be configured
properly:
1. Select protocol to be used via System Register
2. Clear "reset" flag in USI_CON
3. Configure HWACG behavior (e.g. for UART Rx the HWACG must be
disabled, so that the IP clock is not gated automatically); this is
done using USI_OPTION register
4. Keep both USI clocks (PCLK and IPCLK) running during USI registers
modification
This driver implements the above behavior. Of course, USIv2 driver
should be probed before UART/I2C/SPI drivers. It can be achieved by
embedding UART/I2C/SPI nodes inside of the USI node (in Device Tree);
driver then walks underlying nodes and instantiates those. Driver also
handles USI configuration on PM resume, as register contents can be lost
during CPU suspend.
This driver is designed with different USI versions in mind. So it
should be relatively easy to add new USI revisions to it later.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211204195757.8600-3-semen.protsenko@linaro.org
Tested-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add support to set SA/DA/BSSID in testmode.
During mass production stage, some test scripts or test equipments need
to set fixed addresses to detect or parse if a test is passed.
Also, MAC setting is necessary for some tx/rx tests with rx filter,
to make sure rx site only receives expected packets.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Load the default eeprom data when the content of flash/efuse is invalid.
This could help to eliminate some issues due to incorrect or
insufficient rf values.
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Only set RX_FLAG_RADIOTAP_HE and RX_FLAG_RADIOTAP_HE_MU from with their
own decoder functions to prevent header calculation error.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The HW can apply header translation to first fragmented frame, and
ramaining fragmented frame can only keep 802.11 format. Check and
reverse the first fragmented frame to 802.11 format to make sure
them can be defragmented by mac80211.
Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
TGn fails sending SM power save mode action frame to the AP to switch
from dynamic SMPS mode to static mode.
Reported-by: Fang Zhao <fang.zhao@mediatek.com>
Signed-off-by: Fang Zhao <fang.zhao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix the issue that some registers not configured properly after
restarting testmode.
(e.g. change state from idle to off, and off to idle)
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There is a missing mt7921e_driver_own in the MT7921E reset procedure
since the mt7921 mcu.c has been refactored for MT7921S, that will
result in MT7921E reset failure, so add it back now.
Fixes: dfc7743de1 ("mt76: mt7921: refactor mcu.c to be bus independent")
Reported-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ieee80211_register_hw() is called with rtnl_lock held, and this could be
caused lockdep from a work item that's on a workqueue that is flushed
with the rtnl held.
Move mt7615_register_ext_phy() outside the init_work().
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
offload_flags have to be dropped for mt7921 because mt76.omac_idx 0 would
always run as station mode that would cause Tx encapsulation setting
is not applied to mac80211.
Also, drop IEEE80211_OFFLOAD_ENCAP_4ADDR too because it is not really
being supported.
Fixes: e0f9fdda81 ("mt76: mt7921: add ieee80211_ops")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix the following sparse warning removing mt7915_mcu_set_fixed_rate
since it is no longer used:
warning: symbol 'mt7915_mcu_set_fixed_rate' was not declared.
Should it be static?
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Optimistic spinning needs to be terminated when the spinning waiter is not
longer the top waiter on the lock, but the condition is negated. It
terminates if the waiter is the top waiter, which is defeating the whole
purpose.
Fixes: c3123c4314 ("locking/rtmutex: Dont dereference waiter lockless")
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211217074207.77425-1-qiang1.zhang@intel.com
There are two different PCIe PHYs on SM8450, one having one lane (v5)
and another with two lanes (v5.20). This commit adds support for the
first PCIe phy only, support for the second PCIe PHY is coming in next
commits.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214225846.2043361-4-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are two different PCIe PHYs on SM8450, one having one lane and
another with two lanes. Add DT bindings for the first one. Support for
second PCIe host and PHY will be submitted separately.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211214225846.2043361-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation of the multitile support, highlight the root GT by
calling it gt0 inside the drm i915 private data.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-11-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-10-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-9-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-8-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-7-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-6-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-5-andi.shyti@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-4-andi.shyti@linux.intel.com
To allow further refactoring and abstract away the fact that GT is
stored inside i915 private.
No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-3-andi.shyti@linux.intel.com
We now support a per-gt uncore, yet we're not able to infer which GT
we're operating upon. Let's store a backpointer for now.
At this point the early initialization of the gt needs to be
broken in two parts where the first is needed to assign to the gt
the i915 private data pointer and the uncore. A temporary
function has been made and the two parts are
__intel_gt_init_early() and intel_gt_init_early(). This split
will be fixed in the future with the multitile patch.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-2-andi.shyti@linux.intel.com
Now that iomap has been converted, XFS is large folio safe.
Indicate to the VFS that it can now create large folios for XFS.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
If we're punching a hole in a large folio, we need to remove the
per-folio iomap data as the folio is about to be split and each page will
need its own. If a dirty folio is only partially-uptodate, the iomap
data contains the information about which blocks cannot be written back,
so assert that a dirty folio is fully uptodate.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The arguments are still pages for now, but we can use folios internally
and cut out a lot of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We still iterate one block at a time, but now we call compound_head()
less often.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Rename end_offset to end_pos and offset_into_page to poff to match the
rest of the file. Simplify the handling of the last page straddling
i_size by doing the EOF check based on the byte granularity i_size
instead of converting to a pgoff prematurely.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Rename end_offset to end_pos and file_offset to pos to match the rest
of the file. Simplify the loop by calculating nblocks up front instead
of each time around the loop.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
XFS has the only implementation of ->discard_page today, so convert it
to use folios in the same patch as converting the API.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This conversion is only safe because iomap only supports writes to inline
data which starts at the beginning of the file.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
These functions still only work in PAGE_SIZE chunks, but there are
fewer conversions from tail to head pages as a result of this patch.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The zero iterator can work in folio-sized chunks instead of page-sized
chunks. This will save a lot of page cache lookups if the file is cached
in large folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
In the future, we want write_begin to know the entire length of the
write so that it can choose to allocate large folios. Pass the full
length in from __iomap_zero_iter() and limit it where necessary.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Mat Martineau says:
====================
mptcp: Miscellaneous changes for 5.17
These are three unrelated patches that we've been testing in the MPTCP
tree.
Patch 1 modifies the packet scheduler that picks which TCP subflow is
used for each chunk of outgoing data. The updated scheduler improves
throughput on multiple-subflow connections.
Patch 2 updates a selftest to verify recent TCP_ULP sockopt changes
on MPTCP fallback sockets.
Patch 3 cleans up some unnecessary comparisons with an 8-bit value.
====================
Link: https://lore.kernel.org/r/20211217233702.299461-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
