Used on gfx9 based systems. Fixes incorrect CU counts reported
in the kernel log.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1833
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some old registers leftover from pre-silicon. No longer
relevant on real hardware. Remove.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to be able to call virt data exchange conditionally
after gmc sw init to reserve bad pages as early as possible.
Since this is a conditional call, we will need
to call it again unconditionally later in the init sequence.
Refactor the data exchange function so it can be
called multiple times without re-initializing the work item.
v2: Cleaned up the code. Kept the original call to init_exchange_data()
inside early init to initialize the work item, afterwards call
exchange_data() when needed.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed By: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use max() and min() in order to make code cleaner.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Play a video on the raven (or PCO, raven2) platform, and then do the S3
test. When resume, the following error will be reported:
amdgpu 0000:02:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring
vcn_dec test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block
<vcn_v1_0> failed -110
amdgpu 0000:02:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
[why]
When playing the video: The power state flag of the vcn block is set to
POWER_STATE_ON.
When doing suspend: There is no change to the power state flag of the
vcn block, it is still POWER_STATE_ON.
When doing resume: Need to open the power gate of the vcn block and set
the power state flag of the VCN block to POWER_STATE_ON.
But at this time, the power state flag of the vcn block is already
POWER_STATE_ON. The power status flag check in the "8f2cdef drm/amd/pm:
avoid duplicate powergate/ungate setting" patch will return the
amdgpu_dpm_set_powergating_by_smu function directly.
As a result, the gate of the power was not opened, causing the
subsequent ring test to fail.
[how]
In the suspend function of the vcn block, explicitly change the power
state flag of the vcn block to POWER_STATE_OFF.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When CONFIG_DEBUG_VM is defined check that pending remove
and tracking nibbles (bits 31-24 of the page refcount) are
cleared. Should the earlier stages of the page lifespan
have a race or logical error, such check could help in
exposing the issue.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Explicitly encode immediate value of pending remove nibble
(bits 31-28) and tracking nibble (bits 27-24) of the page
refcount whenever these nibbles are tested or changed, for
better readability. Also, add some comments describing how
the fragments are handled.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is a race on concurrent 2KB-pgtables release paths when
both upper and lower halves of the containing parent page are
freed, one via page_table_free_rcu() + __tlb_remove_table(),
and the other via page_table_free(). The race might lead to a
corruption as result of remove of list item in page_table_free()
concurrently with __free_page() in __tlb_remove_table().
Let's assume first the lower and next the upper 2KB-pgtables are
freed from a page. Since both halves of the page are allocated
the tracking byte (bits 24-31 of the page _refcount) has value
of 0x03 initially:
CPU0 CPU1
---- ----
page_table_free_rcu() // lower half
{
// _refcount[31..24] == 0x03
...
atomic_xor_bits(&page->_refcount,
0x11U << (0 + 24));
// _refcount[31..24] <= 0x12
...
table = table | (1U << 0);
tlb_remove_table(tlb, table);
}
...
__tlb_remove_table()
{
// _refcount[31..24] == 0x12
mask = _table & 3;
// mask <= 0x01
...
page_table_free() // upper half
{
// _refcount[31..24] == 0x12
...
atomic_xor_bits(
&page->_refcount,
1U << (1 + 24));
// _refcount[31..24] <= 0x10
// mask <= 0x10
...
atomic_xor_bits(&page->_refcount,
mask << (4 + 24));
// _refcount[31..24] <= 0x00
// mask <= 0x00
...
if (mask != 0) // == false
break;
fallthrough;
...
if (mask & 3) // == false
...
else
__free_page(page); list_del(&page->lru);
^^^^^^^^^^^^^^^^^^ RACE! ^^^^^^^^^^^^^^^^^^^^^
} ...
}
The problem is page_table_free() releases the page as result of
lower nibble unset and __tlb_remove_table() observing zero too
early. With this update page_table_free() will use the similar
logic as page_table_free_rcu() + __tlb_remove_table(), and mark
the fragment as pending for removal in the upper nibble until
after the list_del().
In other words, the parent page is considered as unreferenced and
safe to release only when the lower nibble is cleared already and
unsetting a bit in upper nibble results in that nibble turned zero.
Cc: stable@vger.kernel.org
Suggested-by: Vlastimil Babka <vbabka@suse.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The SCLP early buffer is used only during kernel initialization and can be
freed afterwards. The only way to ensure that it is not released while
being in use, is to release it in free_initmem().
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[agordeev@linux.ibm.com: added debug output]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Updating of the pointer to machine check extended save area
on the IPL CPU needs the lowcore protection to be disabled.
Disable interrupts while the protection is off to avoid
unnoticed writes to the lowcore.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When sending a CCA CPRB to a control domain, the CPRB has to be sent via a
usage domain. Previous code used the default domain to route this message.
If the default domain is not online and ready to send the CPRB, the ioctl will
fail even if other usage domains could be used to send the CPRB.
To improve this, instead of using the default domain, switch to auto-select of
the domain.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sync with binutils: update opcode table to reflect the
instruction format update of the lpswey instruction, and
add the qpaci instruction.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
memblock_alloc_try_nid() returns a virtual address, however in error
case the allocated memory is incorrectly freed with memblock_phys_free().
Properly use memblock_free() instead, and pass a physical address to
uv_init() to fix this.
Note: this doesn't fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
memblock_phys_free() is used on a virtual address. Fix this by using
memblock_free().
Note: this doesn't fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
memblock_phys_free() is used on a virtual address. Fix this by using
memblock_free().
Note: this doesn't fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
My s390 assembly is not particularly good so I have read the history
of the reference to do_exit copy_thread and have been able to
verify that do_exit is not used.
The general argument is that s390 has been changed to use the generic
kernel_thread and kernel_execve and the generic versions do not call
do_exit. So it is strange to see a do_exit reference sitting there.
The history of the do_exit reference in s390's version of copy_thread
seems conclusive that the do_exit reference is something that lingers
and should have been removed several years ago.
Up through 8d19f15a60be ("[PATCH] s390 update (1/27): arch.") the
s390 code made a call to the exit(2) system call when a kernel thread
finished. Then kernel_thread_starter was added which branched
directly to the value in register 11 when the kernel thread finshed.
The value in register 11 was set in kernel_thread to
"regs.gprs[11] = (unsigned long) do_exit"
In commit 37fe5d41f6 ("s390: fold kernel_thread_helper() into
ret_from_fork()") kernel_thread_starter was moved into entry.S and
entry64.S unchanged (except for the syntax differences between inline
assemly and in the assembly file).
In commit f9a7e025df ("s390: switch to generic kernel_thread()") the
assignment to "gprs[11]" was moved into copy_thread from the old
kernel_thread. The helper kernel_thread_starter was still being used
and was still branching to "%r11" at the end.
In commit 30dcb0996e ("s390: switch to saner kernel_execve()
semantics") kernel_thread_starter was changed to unconditionally
branch to sysc_tracenogo instead to %r11 which held the value of
do_exit. Unfortunately copy_thread was not updated to stop passing
do_exit in "gprs[11]".
In commit 56e62a7370 ("s390: convert to generic entry")
kernel_thread_starter was replaced by __ret_from_fork. And the code
still continued to pass do_exit in "gprs[11]" despite __ret_from_fork
not caring in the slightest.
Remove this dead reference to do_exit to make it clear that s390 is
not doing anything with do_exit in copy_thread.
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 30dcb0996e ("s390: switch to saner kernel_execve() semantics")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20211208202532.16409-1-ebiederm@xmission.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Make the bounds propagation in __reg_assign_32_into_64() slightly more
robust and readable by aligning it similarly as we did back in the
__reg_combine_64_into_32() counterpart. Meaning, only propagate or
pessimize them as a smin/smax pair.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
For the case where both s32_{min,max}_value bounds are positive, the
__reg_assign_32_into_64() directly propagates them to their 64 bit
counterparts, otherwise it pessimises them into [0,u32_max] universe and
tries to refine them later on by learning through the tnum as per comment
in mentioned function. However, that does not always happen, for example,
in mov32 operation we call zext_32_to_64(dst_reg) which invokes the
__reg_assign_32_into_64() as is without subsequent bounds update as
elsewhere thus no refinement based on tnum takes place.
Thus, not calling into the __update_reg_bounds() / __reg_deduce_bounds() /
__reg_bound_offset() triplet as we do, for example, in case of ALU ops via
adjust_scalar_min_max_vals(), will lead to more pessimistic bounds when
dumping the full register state:
Before fix:
0: (b4) w0 = -1
1: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=4294967295,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
1: (bc) w0 = w0
2: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=0,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
Technically, the smin_value=0 and smax_value=4294967295 bounds are not
incorrect, but given the register is still a constant, they break assumptions
about const scalars that smin_value == smax_value and umin_value == umax_value.
After fix:
0: (b4) w0 = -1
1: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=4294967295,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
1: (bc) w0 = w0
2: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=4294967295,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
Without the smin_value == smax_value and umin_value == umax_value invariant
being intact for const scalars, it is possible to leak out kernel pointers
from unprivileged user space if the latter is enabled. For example, when such
registers are involved in pointer arithmtics, then adjust_ptr_min_max_vals()
will taint the destination register into an unknown scalar, and the latter
can be exported and stored e.g. into a BPF map value.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Fix the message argument.
0: Allow power down
1: Disallow power down
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is still needed for thoes in case the firmware fails to load
then the message is the only way to tell what firmware was on them
Suggested-by: Lijo Lazar <lijo.Lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add svm_range_bo_unref_async to schedule work to wait for svm_bo
eviction work done and then free svm_bo. __do_munmap put_page
is atomic context, call svm_range_bo_unref_async to avoid warning
invalid wait context. Other non atomic context call svm_range_bo_unref.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No check for if "rc" is an error code for build_sec_desc().
This can cause problems with using uninitialized pntsd_size.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is a failure path and it should return -EINVAL instead of success.
Otherwise it could result in the caller using uninitialized memory.
Fixes: 303fff2b8c ("ksmbd: add validation for ndr read/write functions")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the s0ix entry need retain gfx in the gfxoff state,so here need't
set gfx cgpg in the S0ix suspend-resume process. Moreover move the S0ix
check into SMU12 can simplify the code condition check.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since this variable was made available by the previous commit, use
it to make function access cleaner.
Suggested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ath.git patches for v5.17. Major changes:
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
- Fix DM integrity data corruption, introduced during 5.16 merge, due
to improper use of bvec_kmap_local().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmG7cKcACgkQxSPxCi2d
A1qgxggAn4k9cGzxLTT+xgkufQKwsc+WvegR7Amwb/jzKh5XE9KaXDnMkcyz/4GX
nHCfynHRgWjPU6V3cESRz/MApG/7sQ6UGtLgIXkZGbeSHIE4aRYf3AECUhpD/uB+
XPX4kTFz0ZvIHYpk4HielOHVA31DQl+GkYXddDXCijXYmG80rpUgUg2fm0+O+TtQ
eCQjbQV173KSbi4vlzeDyK9cp2rIGvk/UfmY9cIw1b3Gd5vpCVStW9r+P8MEpSNA
ar5exvN9c3AR/VIVfBS/9rw0T+l56M8L0efPrSXEV9/pdiXHFzEx+sGEnDUE5F3o
g9K2VwkLtuk3kubiSV/kjNBIB4cZyA==
=razj
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix use after free in DM btree remove's rebalance_children()
- Fix DM integrity data corruption, introduced during 5.16 merge, due
to improper use of bvec_kmap_local()
* tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix data corruption due to improper use of bvec_kmap_local
dm btree remove: fix use after free in rebalance_children()
Only bfq needs to code to track icq, so make it conditional.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold create_task_io_context into the only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The flow in set_task_ioprio can be simplified by simply open coding
create_task_io_context, which removes a refcount roundtrip on the I/O
context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold get_task_io_context into its only caller, and simplify the code
as no reference to the I/O context is required to just set the ioprio
field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep set_task_ioprio with the other low-level code that accesses the
io_context structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold __ioc_clear_queue into ioc_clear_queue and switch to always
use plain _irq locking instead of the more expensive _irqsave that
is not needed here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the code to delay freeing the icqs into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No caller passes in a NULL pointer, so remove the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a ioc_exit_icqs helper to tear down the icqs and the fold
the rest of put_iocontext_active into exit_io_context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't hold a reference to ->refcount for each active reference, but
just one for all active references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nothing ever looks at ->nr_tasks, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211209063131.18537-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This driver was for rare and shortlived high end enterprise hardware
and hasn't been maintained since 2014, which also means it never got
converted to use blk-mq.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add documentation for ad3552r and ad3542r
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This enables the block layer to send us a full plug list of requests
that need submitting. The block layer guarantees that they all belong
to the same queue, but we do have to check the hardware queue mapping
for each request.
If errors are encountered, leave them in the passed in list. Then the
block layer will handle them individually.
This is good for about a 4% improvement in peak performance, taking us
from 9.6M to 10M IOPS/core.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a nvme_prep_rq() helper to setup a command, and nvme_queue_rq() is
adapted to use this helper.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
