Add support for the USB DP & UNI PHYs found on SM8450. This is same as
the phy version used on SM8350 and sequences turned out to be same, so
use the same table from SM8350 for this as well.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213131450.535775-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the compatible string for USB phy found in Qualcomm SM8450 SoC
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213131450.535775-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The slew rate and drive-strength of the i2c1 pads were much too
high. Bring them down to avoid signal quality issues.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently, the imx6q-wandboard Ethernet does not transmit any
data.
This issue has been exposed by commit f5d9aa79df ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").
Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.
Fixes: 77591e4245 ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description")
Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the missing reset-gpios property to allow Linux to fully reset
the network PHY and fix the pinmux to add the neccessary pull-ups
for the PHY strap configuration.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in
the kernel the Regulators and Clocks are controlled by an OpRegion
driver designed to work with power control methods defined in ACPI, but
some platforms lack those methods, meaning drivers need to be able to
consume the resources of these chips through the usual frameworks.
This commit adds a driver for the clocks provided by the tps68470,
and is designed to bind to the platform_device registered by the
intel_skl_int3472 module.
This is based on this out of tree driver written by Intel:
https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/clk/clk-tps68470.c
with various cleanups added.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-7-hdegoede@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmG6YLQUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zwGwf8Csb4wXyc3duBlnX/9jO9REDVKTN9
HhmU2KQm29g10dN2nlFXEOG16xAy8zt3BE7QwniL/R5sUsKTCAEugY8Aqq/4+lFA
vTU+YR9YqZFmEDGMfDngHeh9ZvSWIJS7IEXthxCkgGVhrd2Wl50jKTjVyq1RIDKv
a7B4fOhguFv95xRlnXK+yoVUU7zZPWAgxyCqV0E0JEi8aWE8Y483IRCzcDEyJeDa
HkgZLVwD9l3WQ4uZllVg1q5jfSprHwBa8dFxgcd6mOOYaKowiJ+GjnvnXOto5X72
zsODBJH15VzfVXF5cAqIvzN6nAFR8Mxieei+21iFyUD/Ps1vfWlodFHH2w==
=Q1N9
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into clk-x86
Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
* tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit 2ab73c6d83 ("gpio: Support GPIO controllers without
pin-ranges")
Fixes: 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When PINCTRL_ASPEED_G* is selected,
and MFD_SYSCON is not selected,
Kbuild gives the following warnings:
WARNING: unmet direct dependencies detected for PINCTRL_ASPEED
Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_SYSCON [=n]
Selected by [y]:
- PINCTRL_ASPEED_G4 [=y] && PINCTRL [=y] && (MACH_ASPEED_G4 [=n] || COMPILE_TEST [=y]) && OF [=y]
WARNING: unmet direct dependencies detected for PINCTRL_ASPEED
Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S>
Selected by [y]:
- PINCTRL_ASPEED_G5 [=y] && PINCTRL [=y] && (MACH_ASPEED_G5 [=n] || COMPILE_TEST [=y]) && O>
WARNING: unmet direct dependencies detected for PINCTRL_ASPEED
Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S>
Selected by [y]:
- PINCTRL_ASPEED_G6 [=y] && PINCTRL [=y] && (MACH_ASPEED_G6 [=n] || COMPILE_TEST [=y]) && O>
This is because MACH_ASPEED_G* depend on (ARCH_ASPEED || COMPILE_TEST).
ARCH_ASPEED enables the MFD_SYSCON dependency, but COMPILE_TEST doesn't.
These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20211215214022.146391-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Intel Baytrail and Cherryview IRQ related fixes
The following is an automated git shortlog grouped by driver:
baytrail:
- Set IRQCHIP_SET_TYPE_MASKED flag on the irqchip
cherryview:
- Use temporary variable for struct device
- Do not allow the same interrupt line to be used by 2 pins
- Don't use selection 0 to mark an interrupt line as unused
-----BEGIN PGP SIGNATURE-----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=8Crg
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.17-3' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.17-3
* Intel Baytrail and Cherryview IRQ related fixes
The following is an automated git shortlog grouped by driver:
baytrail:
- Set IRQCHIP_SET_TYPE_MASKED flag on the irqchip
cherryview:
- Use temporary variable for struct device
- Do not allow the same interrupt line to be used by 2 pins
- Don't use selection 0 to mark an interrupt line as unused
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211214125855.33207-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Consider the GPIO controller offset (from "gpio-ranges") to compute the
maximum GPIO line number.
This fixes an issue where gpio-ranges uses a non-null offset.
e.g.: gpio-ranges = <&pinctrl 6 86 10>
In that case the last valid GPIO line is not 9 but 15 (6 + 10 - 1)
Cc: stable@vger.kernel.org
Fixes: 67e2996f72 ("pinctrl: stm32: fix the reported number of GPIO lines per bank")
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20211215095808.621716-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Testing the stealing of guc ids is hard from user space as we have 64k
guc_ids. Add a selftest, which artificially reduces the number of guc
ids, and forces a steal.
The test creates a spinner which is used to block all subsequent
submissions until it completes. Next, a loop creates a context and a NOP
request each iteration until the guc_ids are exhausted (request creation
returns -EAGAIN). The spinner is ended, unblocking all requests created
in the loop. At this point all guc_ids are exhausted but are available
to steal. Try to create another request which should successfully steal
a guc_id. Wait on last request to complete, idle GPU, verify a guc_id
was stolen via a counter, and exit the test. Test also artificially
reduces the number of guc_ids so the test runs in a timely manner.
v2:
(John Harrison)
- s/stole/stolen
- Fix some wording in test description
- Rework indexing into context array
- Add test description to commit message
- Fix typo in commit message
(Checkpatch)
- s/guc/(guc) in NUMBER_MULTI_LRC_GUC_ID
v3:
(John Harrison)
- Set array value to NULL after extracting error
- Fix a few typos in comments / error messages
- Delete redundant comment in commit message
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-8-matthew.brost@intel.com
Print CT state (H2G + G2H head / tail pointers, credits) on CT
deadlock.
v2:
(John Harrison)
- Add units to debug messages
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-6-matthew.brost@intel.com
While attempting to debug a CT deadlock issue in various CI failures
(most easily reproduced with gem_ctx_create/basic-files), I was seeing
CPU deadlock errors being reported. This were because the context
destroy loop was blocking waiting on H2G space from inside an IRQ
spinlock. There no was deadlock as such, it's just that the H2G queue
was full of context destroy commands and GuC was taking a long time to
process them. However, the kernel was seeing the large amount of time
spent inside the IRQ lock as a dead CPU. Various Bad Things(tm) would
then happen (heartbeat failures, CT deadlock errors, outstanding H2G
WARNs, etc.).
Re-working the loop to only acquire the spinlock around the list
management (which is all it is meant to protect) rather than the
entire destroy operation seems to fix all the above issues.
v2:
(John Harrison)
- Fix typo in comment message
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-5-matthew.brost@intel.com
A full GT reset can race with the last context put resulting in the
context ref count being zero but the destroyed bit not yet being set.
Remove GEM_BUG_ON in scrub_guc_desc_for_outstanding_g2h that asserts the
destroyed bit must be set in ref count is zero.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-4-matthew.brost@intel.com
Previously assigned whole guc_id structure (list, spin lock) which is
incorrect, only assign the guc_id.id.
Fixes: 0f7976506d ("drm/i915/guc: Rework and simplify locking")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-3-matthew.brost@intel.com
s/ce/cn/ when grabbing guc_state.lock before calling
clr_context_registered.
Fixes: 0f7976506d ("drm/i915/guc: Rework and simplify locking")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-2-matthew.brost@intel.com
Add Wacom I2C support for the reMarkable 2 eInk tablet using the
generic I2C HID framework.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set the direction directly without calling pinctrl_gpio_direction().
This avoids the mutex_lock() calls in that function, which would
invalid the can_sleep = false.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20211206131648.1521868-4-hverkuil-cisco@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Set the direction directly without calling pinctrl_gpio_direction().
This avoids the mutex_lock() calls in that function, which would
invalid the can_sleep = false.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206131648.1521868-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Suppose devfreq_update_status() failure in devfreq_set_target() is not a
critical error, reduces the log severity.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Compile-testing the driver without CONFIG_COMMON_CLK causes
a link failure:
arm-linux-gnueabi-ld: drivers/devfreq/sun8i-a33-mbus.o: in function `sun8i_a33_mbus_remove':
sun8i-a33-mbus.c:(.text+0x450): undefined reference to `clk_rate_exclusive_put'
arm-linux-gnueabi-ld: sun8i-a33-mbus.c:(.text+0x460): undefined reference to `clk_rate_exclusive_put'
arm-linux-gnueabi-ld: drivers/devfreq/sun8i-a33-mbus.o: in function `sun8i_a33_mbus_probe':
sun8i-a33-mbus.c:(.text+0x85c): undefined reference to `clk_rate_exclusive_get'
arm-linux-gnueabi-ld: sun8i-a33-mbus.c:(.text+0x878): undefined reference to `clk_rate_exclusive_get'
Fixes: 8bfd4858b4 ("PM / devfreq: Add a driver for the sun8i/sun50i MBUS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This set of patches deals with modifications to the signature of kcontrol
get/set data functions to make them more intuitive. The last patch deals
with initializing the binary control data size after boot up.
Packet sockets may switch ring versions. Avoid misinterpreting state
between versions, whose fields share a union. rx_owner_map is only
allocated with a packet ring (pg_vec) and both are swapped together.
If pg_vec is NULL, meaning no packet ring was allocated, then neither
was rx_owner_map. And the field may be old state from a tpacket_v3.
Fixes: 61fad6816f ("net/packet: tpacket_rcv: avoid a producer race condition")
Reported-by: Syzbot <syzbot+1ac0994a0a0c55151121@syzkaller.appspotmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211215143937.106178-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
since it may cause a potential kernel information leak issue, as follows:
1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for
a new map.
2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't
zero it.
3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific
element's information in the map.
4. The kernel function map_lookup_elem will call bpf_map_copy_value to get
the information allocated at step-2, then use copy_to_user to copy to the
user buffer.
This can only leak information for an array map.
Fixes: 395cacb5f1 ("netdevsim: bpf: support fake map offload")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com>
Link: https://lore.kernel.org/r/20211215111530.72103-1-tcs.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unfortunately, with the blamed commit I also added a side effect in the
ethtool stats shown. Because I added two more fields in the per channel
structure without verifying if its size is used in any way, part of the
ethtool statistics were off by 2.
Fix this by not looking up the size of the structure but instead on a
fixed value kept in a macro.
Fixes: fc398bec03 ("net: dpaa2: add adaptive interrupt coalescing")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20211215105831.290070-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next, mostly
rather small housekeeping patches:
1) Remove unused variable in IPVS, from GuoYong Zheng.
2) Use memset_after in conntrack, from Kees Cook.
3) Remove leftover function in nfnetlink_queue, from Florian Westphal.
4) Remove redundant test on bool in conntrack, from Bernard Zhao.
5) egress support for nft_fwd, from Lukas Wunner.
6) Make pppoe work for br_netfilter, from Florian Westphal.
7) Remove unused variable in conntrack resize routine, from luo penghao.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: conntrack: Remove useless assignment statements
netfilter: bridge: add support for pppoe filtering
netfilter: nft_fwd_netdev: Support egress hook
netfilter: ctnetlink: remove useless type conversion to bool
netfilter: nf_queue: remove leftover synchronize_rcu
netfilter: conntrack: Use memset_startat() to zero struct nf_conn
ipvs: remove unused variable for ip_vs_new_dest
====================
Link: https://lore.kernel.org/r/20211215234911.170741-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The --jobs parameter for kunit_tool currently defaults to 8 CPUs,
regardless of the number available. For systems with significantly more
(or less), this is not as efficient. Instead, default --jobs to the
number of CPUs available to the process: while there are as many
superstitions as to exactly what the ideal jobs:CPU ratio is, this seems
sufficiently sensible to me.
A new helper function to get the default number of jobs is added:
get_default_jobs() -- this is used in kunit_tool_test instead of a
hardcoded value, or an explicit call to len(os.sched_getaffinity()), so
should be more flexible if this needs to change in the future.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After upgrading mypy and pytype from pip, we see 2 new errors when
running ./tools/testing/kunit/run_checks.py.
Error #1: mypy and pytype
They now deduce that importlib.util.spec_from_file_location() can return
None and note that we're not checking for this.
We validate that the arch is valid (i.e. the file exists) beforehand.
Add in an `asssert spec is not None` to appease the checkers.
Error #2: pytype bug https://github.com/google/pytype/issues/1057
It doesn't like `from datetime import datetime`, specifically that a
type shares a name with a module.
We can workaround this by either
* renaming the import or just using `import datetime`
* passing the new `--fix-module-collisions` flag to pytype.
We pick the first option for now because
* the flag is quite new, only in the 2021.11.29 release.
* I'd prefer if people can just run `pytype <file>`
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add UTS_RELEASE and show timestamp the same way for consistency.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211215174524.1742389-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The "dp_bridge" pointer is allocated with devm_kzalloc() so it will be
freed automatically. Kfreeing it here will only lead to a double free.
Fixes: 8a3b4c17f8 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211215114900.GD14552@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Squash dpu_debugfs_setup_regset32() into dpu_debugfs_create_regset32().
it makes little sense to have separate function to just setup the
structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Proper support for the 'default_scaling' debugfs file was removed during
DPU driver pre-merge cleanup. Remove leftover file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Change \t to \n in the print format to stop putting all SSPP status in a
single line. Splitting it to one SSPP per line is much more readable.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The disable_danger debugfs file is not related to a single plane.
Instead it is used by all registered planes. Move it from plane subtree
to the global subtree next to danger_status and safe_status files,
so that the new file supplements them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The old_size assignment here will not be used anymore
The clang_analyzer complains as follows:
Value stored to 'old_size' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In commit 5648b5e116 ("netfilter: nfnetlink_queue: fix OOB when mac
header was cleared"), the test for non-empty MAC header introduced in
commit 2c38de4c1f ("netfilter: fix looped (broad|multi)cast's MAC
handling") has been replaced with a test for a set MAC header.
This breaks the case when the MAC header has been reset (using
skb_reset_mac_header), as is the case with looped-back multicast
packets. As a result, the packets ending up in NFQUEUE get a bogus
hwaddr interpreted from the first bytes of the IP header.
This patch adds a test for a non-empty MAC header in addition to the
test for a set MAC header. The same two tests are also implemented in
nfnetlink_log.c, where the initial code of commit 2c38de4c1f
("netfilter: fix looped (broad|multi)cast's MAC handling") has not been
touched, but where supposedly the same situation may happen.
Fixes: 5648b5e116 ("netfilter: nfnetlink_queue: fix OOB when mac header was cleared")
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
During disconnect USB-3 ports often go via SS.Inactive link error state
before the missing terminations are noticed, and link finally goes to
RxDetect state
Avoid immediately warm-resetting ports in SS.Inactive state.
Let ports settle for a while and re-read the link status a few times 20ms
apart to see if the ports transitions out of SS.Inactive.
According to USB 3.x spec 7.5.2, a port in SS.Inactive should
automatically check for missing far-end receiver termination every
12 ms (SSInactiveQuietTimeout)
The futile multiple warm reset retries of a disconnected device takes
a lot of time, also the resetting of a removed devices has caused cases
where the reset bit got stuck for a long time on xHCI roothub.
This lead to issues in detecting new devices connected to the same port
shortly after.
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210111653.1378381-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing unlock before return from function xenhcd_urb_request_done()
and xenhcd_conn_notify() in the error handling case.
Fixes: 494ed3997d ("usb: Introduce Xen pvUSB frontend (xen hcd)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211215035805.375244-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
