The hyp memory pool struct is sized to fit exactly the needs of the
hypervisor stage-1 page-table allocator, so it is important it is not
used for anything else. As it is currently used only from setup.c,
reduce its visibility by marking it static.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211208152300.2478542-4-qperret@google.com
GICv2 requires having device mappings in guests and the hypervisor,
which is incompatible with the current pKVM EL2 page ownership model
which only covers memory. While it would be desirable to support pKVM
with GICv2, this will require a lot more work, so let's make the
current assumption clear until then.
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211208152300.2478542-3-qperret@google.com
The EL2 page allocator in protected mode maintains a per-pool max order
value to optimize allocations when the memory region it covers is small.
However, the max order value is currently under-estimated whenever the
number of pages in the region is a power of two. Fix the estimation.
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211208152300.2478542-2-qperret@google.com
The return value of device_property_read_u32_array() is not always 0.
To catch the exception in case that devm_kzalloc failed and the
rt5663->imp_table was NULL, which caused the failure of
device_property_read_u32_array.
Fixes: 450f0f6a8f ("ASoC: rt5663: Add the manual offset field to compensate the DC offset")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211215031550.70702-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Similar with commit 8a49cd11e6 ("ASoC: SOF: ACPI: avoid reverse
module dependency") we will be having hardware specific drivers that
link against a common "helper" framework.
sof-of-dev.c becomes a library with the interface defined in the newly
created file sof-of-dev.h.
This is the final step started with Kconfig simplification in
commit 7548a391c5 ("ASoC: SOF: i.MX: simplify Kconfig")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211215085703.137414-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The memory reservation in arch/x86/platform/efi/efi.c depends on at
least two command line parameters. Put it back later in the boot process
and move efi_memblock_x86_reserve_range() out of early_memory_reserve().
An attempt to fix this was done in
8d48bf8206 ("x86/boot: Pull up cmdline preparation and early param parsing")
but that caused other troubles so it got reverted.
The bug this is addressing is:
Dan reports that Anjaneya Chagam can no longer use the efi=nosoftreserve
kernel command line parameter to suppress "soft reservation" behavior.
This is due to the fact that the following call-chain happens at boot:
early_reserve_memory
|-> efi_memblock_x86_reserve_range
|-> efi_fake_memmap_early
which does
if (!efi_soft_reserve_enabled())
return;
and that would have set EFI_MEM_NO_SOFT_RESERVE after having parsed
"nosoftreserve".
However, parse_early_param() gets called *after* it, leading to the boot
cmdline not being taken into account.
See also https://lore.kernel.org/r/e8dd8993c38702ee6dd73b3c11f158617e665607.camel@intel.com
[ bp: Turn into a proper patch. ]
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211213112757.2612-4-bp@alien8.de
Allow storing a secondary dir fh and name tupple in fanotify_info.
This will be used to store the new parent and name information in
FAN_RENAME event.
Link: https://lore.kernel.org/r/20211129201537.1932819-8-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
fanotify_info buffer is parceled into variable sized records, so the
records must be written in order: dir_fh, file_fh, name.
Use helpers to assert that order and make fanotify_alloc_name_event()
a bit more generic to allow empty dir_fh record and to allow expanding
to more records (i.e. name2) soon.
Link: https://lore.kernel.org/r/20211129201537.1932819-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The fanotify_info buffer contains up to two file handles and a name.
Use macros to simplify the code that access the different items within
the buffer.
Add assertions to verify that stored fh len and name len do not overflow
the u8 stored value in fanotify_info header.
Remove the unused fanotify_info_len() helper.
Link: https://lore.kernel.org/r/20211129201537.1932819-6-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The dnotify FS_DN_RENAME event is used to request notification about
a move within the same parent directory and was always coupled with
the FS_MOVED_FROM event.
Rename the FS_DN_RENAME event flag to FS_RENAME, decouple it from
FS_MOVED_FROM and report it with the moved dentry instead of the moved
inode, so it has the information about both old and new parent and name.
Generate the FS_RENAME event regardless of same parent dir and apply
the "same parent" rule in the generic fsnotify_handle_event() helper
that is used to call backends with ->handle_inode_event() method
(i.e. dnotify). The ->handle_inode_event() method is not rich enough to
report both old and new parent and name anyway.
The enriched event is reported to fanotify over the ->handle_event()
method with the old and new dir inode marks in marks array slots for
ITER_TYPE_INODE and a new iter type slot ITER_TYPE_INODE2.
The enriched event will be used for reporting old and new parent+name to
fanotify groups with FAN_RENAME events.
Link: https://lore.kernel.org/r/20211129201537.1932819-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
FAN_REPORT_FID is ambiguous in that it reports the fid of the child for
some events and the fid of the parent for create/delete/move events.
The new FAN_REPORT_TARGET_FID flag is an implicit request to report
the fid of the target object of the operation (a.k.a the child inode)
also in create/delete/move events in addition to the fid of the parent
and the name of the child.
To reduce the test matrix for uninteresting use cases, the new
FAN_REPORT_TARGET_FID flag requires both FAN_REPORT_NAME and
FAN_REPORT_FID. The convenience macro FAN_REPORT_DFID_NAME_TARGET
combines FAN_REPORT_TARGET_FID with all the required flags.
Link: https://lore.kernel.org/r/20211129201537.1932819-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
They are two different types that use the same enum, so this confusing.
Use the object type to indicate the type of object mark is attached to
and the iter type to indicate the type of watch.
A group can have two different watches of the same object type (parent
and child watches) that match the same event.
Link: https://lore.kernel.org/r/20211129201537.1932819-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In preparation for separating object type from iterator type, rename
some 'type' arguments in functions to 'obj_type' and remove the unused
interface to clear marks by object type mask.
Link: https://lore.kernel.org/r/20211129201537.1932819-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Saeed Mahameed says:
====================
Currently, the driver ignores the user's priority for flow steering rules
in FDB namespace. Change it and create the rule in the right priority.
It will allow to create FDB steering rules in up to 16 different
priorities.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* mellanox/mlx5-next:
RDMA/mlx5: Add support to multiple priorities for FDB rules
net/mlx5: Create more priorities for FDB bypass namespace
net/mlx5: Refactor mlx5_get_flow_namespace
net/mlx5: Separate FDB namespace
When memory allocation of iinfo or block allocation fails, already
allocated struct udf_inode_info gets freed with iput() and
udf_evict_inode() may look at inode fields which are not properly
initialized. Fix it by marking inode bad before dropping reference to it
in udf_new_inode().
Reported-by: syzbot+9ca499bb57a2b9e4c652@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Add AEST to the list of known ACPI table signatures to allow the
kernel to recognize it when upgrading tables via initrd.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: New subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This doesn't make any sense as a module since it is a critical device,
and it turns out of_phandle_iterator_args was not exported so the module
version doesn't build anyway.
Fixes: 6df9d38f91 ("soc: apple: Add driver for Apple PMGR power state controls")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
This will bind to the PMGR pwrstate nodes that control power/clock
gating to SoC blocks. The mailbox driver doesn't do runtime-pm yet, so
initially this will just keep the domain on permanently.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
We decided to keep SoC nodes sorted by address for sanity; fix a couple
that slipped into the wrong place.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
We now know that this frequency comes from the external reference
oscillator and is used for various SoC blocks, and isn't just a random
24MHz clock, so let's call it something more appropriate.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
The __dma_inv_area() and __dma_clean_area() aliases make cache.S harder
to navigate, but don't gain us anything in practice.
For clarity, let's remove them along with their redundant comments. The
only users are __dma_map_area() and __dma_unmap_area(), which need to be
position independent, and can call __pi_dcache_inval_poc() and
__pi_dcache_clean_poc() directly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20211206124715.4101571-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
hwight16() is much faster. While we are at it, no need to include
"perm =" part into data_race() macro, for perm is a local variable
that cannot be accessed by other threads.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
If tomoyo is used in a testing/fuzzing environment in learning mode,
for lots of domains the quota will be exceeded and stay exceeded
for prolonged periods of time. In such cases it's pointless (and slow)
to walk the whole acl list again and again just to rediscover that
the quota is exceeded. We already have the TOMOYO_DIF_QUOTA_WARNED flag
that notes the overflow condition. Check it early to avoid the slowdown.
[penguin-kernel]
This patch causes a user visible change that the learning mode will not be
automatically resumed after the quota is increased. To resume the learning
mode, administrator will need to explicitly clear TOMOYO_DIF_QUOTA_WARNED
flag after increasing the quota. But I think that this change is generally
preferable, for administrator likely wants to optimize the acl list for
that domain before increasing the quota, or that domain likely hits the
quota again. Therefore, don't try to care to clear TOMOYO_DIF_QUOTA_WARNED
flag automatically when the quota for that domain changed.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Several DRM/KMS atomic commits can run in parallel if they affect
different CRTC. These commits share the global HVS state, so we have
some code to make sure we run commits in sequence. This synchronization
code is one of the first thing that runs in vc4_atomic_commit_tail().
Another constraints we have is that we need to make sure the HVS clock
gets a boost during the commit. That code relies on clk_set_min_rate and
will remove the old minimum and set a new one. We also need another,
temporary, minimum for the duration of the commit.
The algorithm is thus to set a temporary minimum, drop the previous
one, do the commit, and finally set the minimum for the current mode.
However, the part that sets the temporary minimum and drops the older
one runs before the commit synchronization code.
Thus, under the proper conditions, we can end up mixing up the minimums
and ending up with the wrong one for our current step.
To avoid it, let's move the clock setup in the protected section.
Fixes: d7d96c00e5 ("drm/vc4: hvs: Boost the core clock during modeset")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
[danvet: re-apply this from 0c980a006d ("drm/vc4: kms: Wait for the
commit before increasing our clock rate") because I lost that part in
my merge resolution in 99b03ca651 ("Merge v5.16-rc5 into drm-next")]
Fixes: 99b03ca651 ("Merge v5.16-rc5 into drm-next")
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20211117094527.146275-2-maxime@cerno.tech
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-14
This series contains updates to ice driver only.
Karol corrects division that was causing incorrect calculations and
adds a check to ensure stale timestamps are not being used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-12-14
This series contains updates to ice driver only.
Haiyue adds support to query hardware for supported PTYPEs.
Jeff changes PTYPE validation to utilize the capabilities queried from
the hardware instead of maintaining a per DDP support list.
Brett refactors promiscuous functions to provide common and clear
interfaces to call for configuration.
Wojciech modifies DDP package load to simplify determining the final
state of the load.
Tony removes the use of ice_status from the driver. This involves
removing string conversion functions, converting variables and values to
standard errors, and clean up. He also removes an unused define.
Dan Carpenter removes unneeded casts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kmemdup() may return NULL if there is not enough memory available. Check
this and bail out early in this case. While there move INIT_WORK() to
happen after we have allocated all the memory needed for the event
handling to avoid doing unnecessary work.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This reverts commit 8d48bf8206.
It turned out to be a bad idea as it broke supplying mem= cmdline
parameters due to parse_memopt() requiring preparatory work like setting
up the e820 table in e820__memory_setup() in order to be able to exclude
the range specified by mem=.
Pulling that up would've broken Xen PV again, see threads at
https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com
due to xen_memory_setup() needing the first reservations in
early_reserve_memory() - kernel and initrd - to have happened already.
This could be fixed again by having Xen do those reservations itself...
Long story short, revert this and do a simpler fix in a later patch.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211213112757.2612-3-bp@alien8.de
1. During normal suspend (WoL not enabled) process, system has posibility
to hang. The root cause is TXF interrupt coming after clocks disabled,
system hang when accessing registers from interrupt handler. To fix this
issue, disable all interrupts when system suspend.
2. System also has posibility to hang with WoL enabled during suspend,
after entering stop mode, then magic pattern coming after clocks
disabled, system will be waked up, and interrupt handler will be called,
system hang when access registers. To fix this issue, disable wakeup
irq in .suspend(), and enable it in .resume().
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to get mac from device-tree using of_get_ethdev_address.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the current implementation of emac_rx, every arrived packet
will be processed in the while loop. So, there is no remain packet last
time. The skb_last field and this branch for dealing with it is
unnecessary.
Signed-off-by: Conley Lee <conleylee@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems I missed that most ethnl_parse_header_dev_get() callers
declare an on-stack struct ethnl_req_info, and that they simply call
dev_put(req_info.dev) when about to return.
Add ethnl_parse_header_dev_put() helper to properly untrack
reference taken by ethnl_parse_header_dev_get().
Fixes: e4b8954074 ("netlink: add net device refcount tracker to struct ethnl_req_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If pm_runtime_resume_and_get() fails then it returns w/o the RPM usage
counter being incremented. In this case call pm_runtime_put() in
remove() will result in a usage counter imbalance. Therefore check the
return code of pm_runtime_resume_and_get() and bail out in case of error.
Fixes: bee0855970 ("reset: renesas: Add RZ/G2L usbphy control driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/ec24e13f-0530-b091-7a08-864577b9b3be@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The commit f115f3c0d5 ("iommu/arm-smmu-v3: Decrease the queue size of
evtq and priq") decreases evtq and priq, which may lead evtq/priq to be
full with fault events, e.g HiSilicon ZIP/SEC/HPRE have maximum 1024 queues
in one device, every queue could be binded with one process and trigger a
fault event. So let's revert f115f3c0d5.
In fact, if an implementation of SMMU really does not need so long evtq
and priq, value of IDR1_EVTQS and IDR1_PRIQS can be set to proper ones.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Acked-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/1638858768-9971-1-git-send-email-wangzhou1@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211214164156.49711-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that HSI2C binding [1] is converted to dt-schema format, it reveals
incorrect HSI2C clocks order in USI binding example:
.../exynos-usi.example.dt.yaml:
i2c@13820000: clock-names:0: 'hsi2c' was expected
From schema: .../i2c-exynos5.yaml
.../exynos-usi.example.dt.yaml:
i2c@13820000: clock-names:1: 'hsi2c_pclk' was expected
From schema: .../i2c-exynos5.yaml
Change HSI2C clock order in USI binding example to satisfy HSI2C binding
requirements and fix above warnings.
[1] Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211214170924.27998-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fix possible read beyond ELF "license" data section if the license
string is not properly zero-terminated. Use the fact that libbpf_strlcpy
never accesses the (N-1)st byte of the source string because it's
replaced with '\0' anyways.
If this happens, it's a violation of contract between libbpf and a user,
but not handling this more robustly upsets CIFuzz, so given the fix is
trivial, let's fix the potential issue.
Fixes: 9fc205b413 ("libbpf: Add sane strncpy alternative and use it internally")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211214232054.3458774-1-andrii@kernel.org
Move goto action checks from parse nic/fdb funcs into the tc action
infra goto post parse op.
While moving this part also use NL_SET_ERR_MSG_MOD() instead of
NL_SET_ERR_MSG().
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move vlan prio tag rewrite handling into tc action infra vlan post parse op.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The post_parse() op should be called after the parse op was called
for all actions. It could be an action state is dependent on other
actions. In the new op an action can fail the parse if the state
is not valid anymore.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no reason to wait with the kmalloc to after parsing all
other actions. There could still be a failure later and before
offloading the rule. So alloc the mem when parsing.
The memory is being released on mlx5e_flow_put() which is called
also on error flow.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce a common function to implement the generic parsing loop.
The same function can be used for parsing NIC and FDB (Switchdev mode) flows.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add parsing support by implementing struct mlx5e_tc_act
for this action.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
