Since e71e2ace5721("userfaultfd: do not untag user pointers") which
introduced a warning:
linux/Documentation/arm64/tagged-address-abi.rst:52: WARNING: Unexpected indentation.
Let's fix it.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211209091922.560979-1-siyanteng@loongson.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch enables KCSAN for arm64, with updates to build rules
to not use KCSAN for several incompatible compilation units.
Recent GCC version(at least GCC10) made outline-atomics as the
default option(unlike Clang), which will cause linker errors
for kernel/kcsan/core.o. Disables the out-of-line atomics by
no-outline-atomics to fix the linker errors.
Meanwhile, as Mark said[1], some latent issues are needed to be
fixed which isn't just a KCSAN problem, we make the KCSAN depends
on EXPERT for now.
Tested selftest and kcsan_test(built with GCC11 and Clang 13),
and all passed.
[1] https://lkml.kernel.org/r/YadiUPpJ0gADbiHQ@FVFF77S0Q05N
Acked-by: Marco Elver <elver@google.com> # kernel/kcsan
Tested-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20211211131734.126874-1-wangkefeng.wang@huawei.com
[catalin.marinas@arm.com: added comment to justify EXPERT]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This follows normal Linux convention and is more useful since the new
name will make it apparent which network device the work-queue is for
(e.g., the name will be "wlan0-wq" for network device "wlan0").
hif_workqueue allocation has to move from
cfg80211.c:wilc_cfg80211_init() to netdev.c:wilc_netdev_ifc_init()
because the network device name is not known until after the netdev is
registered. The move also makes sense because netdev.c is already
responsible for destroying the work queue when it is no longer needed.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209044411.3482259-5-davidm@egauge.net
This follows normal Linux conventions and is also more useful because
the netdevice name is part of the task name (e.g., "wlan0-tx" for
network device "wlan0").
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209044411.3482259-4-davidm@egauge.net
This change follows normal Linux convention and the new name is more
useful since it'll be clear which irq handler statistics correspond to
which net device.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209044411.3482259-3-davidm@egauge.net
The name "wilc1000_spi" follows normal Linux conventions and also is
analogous to the SDIO driver, which uses "wilc1000_sdio".
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209044411.3482259-2-davidm@egauge.net
When deinitializing the driver, one or more "FW not responding" error
appears on the console. This appears to be due to wilc_wlan_stop()
disabling host/WILC1000 communication, but then right afterwards, it
tries to release the bus with chip-sleep enabled. The problem is
enabling the chip-sleep cannot success once host/WILC1000
communication is disabled. Fix by only releasing the bus.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211208062747.3405221-1-davidm@egauge.net
The USE_SPI_DMA macro name suggests that it could be set to 1 to
control whether or not SPI DMA should be used. However, that's not
what it does. If set to 1, it'll set the SPI messages'
"is_dma_mapped" flag to true, even though the tx/rx buffers aren't
actually DMA mapped by the driver. In other words, setting this flag
to 1 will break the driver.
Best to clean up this confusion by removing the macro altogether.
There is no need to explicitly initialize "is_dma_mapped" because the
message is cleared to zero anyhow, so "is_dma_mapped" is set to false
by default.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211207002453.3193737-1-davidm@egauge.net
The messages appears to have been copied from wilc_get_mac_address and
says "get" when it should say "set".
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211206232709.3192856-2-davidm@egauge.net
Since it's likely to be useful for performance work with SVE let's have a
pidbench that gives us some numbers for consideration. In order to ensure
that we test exactly the scenario we want this is written in assembly - if
system libraries use SVE this would stop us exercising the case where the
process has never used SVE.
We exercise three cases:
- Never having used SVE.
- Having used SVE once.
- Using SVE after each syscall.
by spinning running getpid() for a fixed number of iterations with the
time measured using CNTVCT_EL0 reported on the console. This is obviously
a totally unrealistic benchmark which will show the extremes of any
performance variation but equally given the potential gotchas with use of
FP instructions by system libraries it's good to have some concrete code
shared to make it easier to compare notes on results.
Testing over multiple SVE vector lengths will need to be done with vlset
currently, the test could be extended to iterate over all of them if
desired.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211202165107.1075259-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
intel_cdclk.h only needs i915_drv.h for struct intel_cdclk_config. Move
the definition to intel_cdclk.h and turn the includes around to avoid
including i915_drv.h from other headers.
The intel cdclk state macros in intel_cdclk.h still reference struct
drm_i915_private, but as macros they don't strictly require the
definition until they are used.
v2: Expand on the commit message wrt cdclk state macros
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-1-jani.nikula@intel.com
Add comments to help people figure out when fpsimd_bind_state_to_cpu() and
fpsimd_update_current_state() are used.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211207163250.1373542-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Move _chk_btc_err and update_bt_cnt to _chk_btc_report(),
so we can update counter/info to COEX at a proper moment,
instead of relying on a user does cat the debug info periodically.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209083229.10815-6-pkshih@realtek.com
Add function to get and parse BT polluted counter.
When WLAN Tx was dropped by BT, the packet will be marked as BT polluted.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209083229.10815-4-pkshih@realtek.com
Prevent to send H2C request to FW when BTC is not initialized or
WL is under power saving. Add counter to count the H2C success or fail.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209083229.10815-3-pkshih@realtek.com
To resolve C2H handle length mismatch, or it will parse the c2h content
out of array.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211209083229.10815-2-pkshih@realtek.com
Currently we don't have any coverage of the syscall ABI so let's add a very
dumb test program which sets up register patterns, does a sysscall and then
checks that the register state after the syscall matches what we expect.
The program is written in an extremely simplistic fashion with the goal of
making it easy to verify that it's doing what it thinks it's doing, it is
not a model of how one should write actual code.
Currently we validate the general purpose, FPSIMD and SVE registers. There
are other thing things that could be covered like FPCR and flags registers,
these can be covered incrementally - my main focus at the minute is
covering the ABI for the SVE registers.
The program repeats the tests for all possible SVE vector lengths in case
some vector length specific optimisation causes issues, as well as testing
FPSIMD only. It tries two syscalls, getpid() and sched_yield(), in an
effort to cover both immediate return to userspace and scheduling another
task though there are no guarantees which cases will be hit.
A new test directory "abi" is added to hold the test, it doesn't seem to
fit well into any of the existing directories.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we have the facility to specify custom code to trigger a signal
but none of the tests use it and for some reason the framework requires us
to also specify a signal to send as a trigger in order to make use of a
custom trigger. This doesn't seem to make much sense, instead allow the
use of a custom trigger function without specifying a signal to inject.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
SME introduces a new mode called streaming mode in which the SVE registers
have a different vector length. Since the ptrace interface for this is
based on the existing SVE interface prepare for supporting this by moving
the regset specific configuration into struct and passing that around,
allowing these tests to be reused for streaming mode. As we will also have
to verify the interoperation of the SVE and streaming SVE regsets don't
just iterate over an array.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As suggested by Luis for the SME version of this explicitly say that the
vector length should be extracted from the return value of a set vector
length prctl() with a bitwise and rather than just any old and.
Suggested-by: Luis Machado <Luis.Machado@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for adding SME support update the bulk of the implementation
for the vector length configuration prctl() calls to be independent of
vector type.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The vector length configuration for SME is very similar to that for SVE
so in order to allow reuse refactor the SVE configuration so that it takes
the vector type from the struct ctl_table. Since there's no dedicated space
for this we repurpose the extra1 field to store the vector type, this is
otherwise unused for integer sysctls.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The "bitmap" variable is already an unsigned long so there is no need
for this cast.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As all functions now return standard error codes, propagate the values
being returned instead of converting them to generic values.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
ice_status previously had a variable to contain these values where other
error codes had a variable as well. With ice_status now being an int,
there is no need for two variables to hold error values. In cases where
this occurs, remove one of the excess variables and use a single one.
Some initialization of variables are no longer needed and have been
removed.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Clean up code after changing ice_status to int. Rearrange to fix reverse
Christmas tree and pull lines up where applicable.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Replace uses of ice_status to, as equivalent as possible, error codes.
Remove enum ice_status and its helper conversion function as they are no
longer needed.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
To prepare for removal of ice_status, change the variables from
ice_status to int. This eases the transition when values are changed to
return standard int error codes over enum ice_status.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Remove the ice_stat_str() function which prints the string
representation of the ice_status error code. With upcoming changes
moving away from ice_status, there will be no need for this function.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Before this change, final state of the DDP pkg load process was
dependent on many variables such as: ice_status, pkg version,
ice_aq_err. The last one had be stored in hw->pkg_dwnld_status.
It was impossible to conclude this state just from ice_status, that's
why logging process of DDP pkg load in the caller was a little bit
complicated.
With this patch new status enum is introduced - ice_ddp_state.
It covers all the possible final states of the loading process.
What's tricky for ice_ddp_state is that not only
ICE_DDP_PKG_SUCCESS(=0) means that load was successful. Actually
three states mean that:
- ICE_DDP_PKG_SUCCESS
- ICE_DDP_PKG_SAME_VERSION_ALREADY_LOADED
- ICE_DDP_PKG_COMPATIBLE_ALREADY_LOADED
ice_is_init_pkg_successful can tell that information.
One ddp_state should not be used outside of ice_init_pkg which is
ICE_DDP_PKG_ALREADY_LOADED. It is more generic, it is used in
ice_dwnld_cfg_bufs to see if pkg is already loaded. At this point
we can't use one of the specific one (SAME_VERSION, COMPATIBLE,
NOT_SUPPORTED) because we don't have information on the package
currently loaded in HW (we are before calling ice_get_pkg_info).
We can get rid of hw->pkg_dwnld_status because we are immediately
mapping aq errors to ice_ddp_state in ice_dwnld_cfg_bufs.
Other errors like ICE_ERR_NO_MEMORY, ICE_ERR_PARAM are mapped the
generic ICE_DDP_PKG_ERR.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some of the promiscuous mode functions take a boolean to indicate
set/clear, which affects readability. Refactor and provide an
interface for the promiscuous mode code with explicit set and clear
promiscuous mode operations.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* for-next/perf-cpu:
arm64: perf: Support new DT compatibles
arm64: perf: Simplify registration boilerplate
arm64: perf: Support Denver and Carmel PMUs
Now we have a macro for BTI C that looks like a regular instruction change
all the users of the current BTI_C macro to just emit a BTI C directly and
remove the macro.
This does mean that we now unconditionally BTI annotate all assembly
functions, meaning that they are worse in this respect than code generated
by the compiler. The overhead should be minimal for implementations with a
reasonable HINT implementation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211214152714.2380849-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we only override the SYM_FUNC macros when we need to insert
BTI C into them, do this unconditionally to make it more likely that we'll
notice bugs in our override.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211214152714.2380849-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
BTI is only available from v8.5 so we need to encode it using HINT in
generic code and for older toolchains. Add an assembler macro based on
one written by Mark Rutland which lets us use the mnemonic and update
the existing users.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20211214152714.2380849-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With the trend for per-core events moving to userspace JSON, registering
names for PMUv3 implementations is increasingly a pure boilerplate
exercise. Let's wrap things a step further so we can generate the basic
PMUv3 init function with a macro invocation, and reduce further new
addition to just 2 lines each.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b79477ea3b97f685d00511d4ecd2f686184dca34.1639490264.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add support for the NVIDIA Denver and Carmel PMUs using the generic
PMUv3 event map for now.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[ rm: reorder entries alphabetically ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5f0f69d47acca78a9e479501aa4d8b429e23cf11.1639490264.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
