Certain functions within i915 uses macros that are defined for
specific architectures by the mmu, such as _PAGE_RW and _PAGE_PRESENT
(Some architectures don't even have these macros defined, like ARM64).
Instead of re-using bits defined for the CPU, we should use bits
defined for i915. This patch introduces two new 64 bit macros,
GEN8_PAGE_PRESENT and GEN8_PAGE_RW, to check for bits 0 and 1 and, to
replace all occurrences of _PAGE_RW and _PAGE_PRESENT within i915.
v2(Michael Cheng): Use GEN8_ instead of I915_
Signed-off-by: Michael Cheng <michael.cheng@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[ Move defines together with other GEN8 defines ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206215245.513677-2-michael.cheng@intel.com
Expose the PCI node corresponding to the WiFi device and give it
a 'local-mac-address' property. The bootloader will update it
(m1n1 already has the required feature).
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This UART is connected to the debug port of the WLAN module. It is
mostly useless, but makes for a good test case for runtime-pm without
having to unbind the console from the main system UART.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds the two PMGR nodes and all known power state subnodes. Since
there are a large number of them, let's put them in a separate file to
include.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Implements genpd and reset providers for downstream devices. Each
instance of the driver binds to a single register and represents a
single SoC power domain.
The driver does not currently implement all features (clockgate-only
state, misc flags), but we declare the respective registers for
documentation purposes. These features will be added as they become
useful for downstream devices.
This also creates the apple/soc tree and Kconfig submenu.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
The PMGR block in Apple Silicon SoCs is responsible for SoC power
management. There are two PMGRs in T8103, with different register
layouts but compatible registers. In order to support this as well
as future SoC generations with backwards-compatible registers, we
declare these blocks as syscons and bind to individual registers
in child nodes. Each register controls one SoC device.
The respective apple compatibles are defined in case device-specific
quirks are necessary in the future, but currently these nodes are
expected to be bound by the generic syscon driver.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This syscon child node represents a single SoC device controlled by the
PMGR block. This layout allows us to declare all device power state
controls (power/clock gating and reset) in the device tree, including
dependencies, instead of hardcoding it into the driver. The register
layout is uniform.
Each pmgr-pwrstate node provides genpd and reset features, to be
consumed by downstream device nodes.
Future SoCs are expected to use backwards compatible registers, and the
"apple,pmgr-pwrstate" represents any such interfaces (possibly with
additional features gated by the more specific compatible), allowing
them to be bound without driver updates. If a backwards incompatible
change is introduced in future SoCs, it will require a new compatible,
such as "apple,pmgr-pwrstate-v2".
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This covers the PMGR power state driver and its DT bindings,
as well as any other future stuff in drivers/soc/apple.
Signed-off-by: Hector Martin <marcan@marcan.st>
Apple SoCs come with a simple embedded watchdog. This watchdog is also
required in order to reset the SoC.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
Commit 598a90f200 ("scsi: qla2xxx: add ring buffer for tracing debug
logs") introduced unconditional log string formatting to ql_dbg() even if
ql_dbg_log event is disabled. It harms performance because some strings are
formatted in fastpath and/or interrupt context.
Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com
Fixes: 598a90f200 ("scsi: qla2xxx: add ring buffer for tracing debug logs")
Cc: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.0.0.4.
Link: https://lore.kernel.org/r/20211204002644.116455-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dump raw CMF parameter information in debugfs cgn_buffer.
Link: https://lore.kernel.org/r/20211204002644.116455-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ensure read bytes data does not go over MBPI for CMF timer intervals that
are purposely shortened.
Link: https://lore.kernel.org/r/20211204002644.116455-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calculate any extra bytes needed to account for timer accuracy. If we are
less than LPFC_CMF_INTERVAL, then calculate the adjustment needed for total
to reflect a full LPFC_CMF_INTERVAL.
Add additional info to rxmonitor, and adjust some log formatting.
Link: https://lore.kernel.org/r/20211204002644.116455-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Extraneous teardown routines are present in the firmware dump path causing
altered states in firmware captures.
When a firmware dump is requested via sysfs, trigger the dump immediately
without tearing down structures and changing adapter state.
The driver shall rely on pre-existing firmware error state clean up
handlers to restore the adapter.
Link: https://lore.kernel.org/r/20211204002644.116455-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is calling schedule_timeout after the DA_ID nameserver request
and LOGO commands are issued to the fabric by the initiator virtual
endport. These fixed delay functions are causing long delays in the
driver's worker thread when processing discovery I/Os in a serialized
fashion, which is then triggering mailbox timeout errors artificially.
To fix this, don't wait on the DA_ID request to complete and call
wait_event_timeout to allow the vport delete thread to make progress on an
event driven basis rather than fixing the wait time.
Link: https://lore.kernel.org/r/20211204002644.116455-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Issuing lpfc_force_rscn twice results in an ndlp kref use-after-free call
trace.
A prior patch reworked the get/put handling by ensuring nlp_get was done
before WQE submission and a put was done in the completion path.
Unfortunately, the issue_els_rscn path had a piece of legacy code that did
a nlp_put, causing an imbalance on the ref counts.
Fixed by removing the unnecessary legacy code snippet.
Link: https://lore.kernel.org/r/20211204002644.116455-4-jsmart2021@gmail.com
Fixes: 4430f7fd09 ("scsi: lpfc: Rework locations of ndlp reference taking")
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During heavy I/O testing with issue_lip to bounce the link, occasionally
I/O is terminated with status 3 result 9, which means the RPI is suspended.
The I/O is completed and this type of error will result in immediate retry
by the SCSI layer. The retry count expires and the I/O fails and returns
error to the application.
To avoid these quick retry/retries exhausted scenarios change the return
code given to the midlayer to DID_REQUEUE rather than DID_ERROR. This gets
them retried, and eventually succeed when the link recovers.
Link: https://lore.kernel.org/r/20211204002644.116455-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During rmmod testing, messages appeared indicating lpfc_mbuf_pool entries
were still busy. This situation was only seen doing rmmod after at least 1
vport (NPIV) instance was created and destroyed. The number of messages
scaled with the number of vports created.
When a vport is created, it can receive a PLOGI from another initiator
Nport. When this happens, the driver prepares to ack the PLOGI and
prepares an RPI for registration (via mbx cmd) which includes an mbuf
allocation. During the unsolicited PLOGI processing and after the RPI
preparation, the driver recognizes it is one of the vport instances and
decides to reject the PLOGI. During the LS_RJT preparation for the PLOGI,
the mailbox struct allocated for RPI registration is freed, but the mbuf
that was also allocated is not released.
Fix by freeing the mbuf with the mailbox struct in the LS_RJT path.
As part of the code review to figure the issue out a couple of other areas
where found that also would not have released the mbuf. Those are cleaned
up as well.
Link: https://lore.kernel.org/r/20211204002644.116455-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Alexander Lobakin says:
====================
Samples, at least XDP ones, can be built only with the compiler used
to build the kernel itself.
However, XDP sample infra introduced in Aug'21 was probably tested
with GCC/Binutils only as it's not really compilable for now with
Clang/LLVM.
These two are trivial fixes addressing this.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Clang doesn't have 'stringop-truncation' group like GCC does, and
complains about it when building samples which use xdp_sample_user
infra:
samples/bpf/xdp_sample_user.h:48:32: warning: unknown warning group '-Wstringop-truncation', ignored [-Wunknown-warning-option]
#pragma GCC diagnostic ignored "-Wstringop-truncation"
^
[ repeat ]
Those are harmless, but avoidable when guarding it with ifdef.
I could guard push/pop as well, but this would require one more
ifdef cruft around a single line which I don't think is reasonable.
Fixes: 156f886cf6 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211203195004.5803-3-alexandr.lobakin@intel.com
Clang (13) doesn't get the jokes about specifying libraries to link in
cclags of individual .o objects:
clang-13: warning: -lm: 'linker' input unused [-Wunused-command-line-argument]
[ ... ]
LD samples/bpf/xdp_redirect_cpu
LD samples/bpf/xdp_redirect_map_multi
LD samples/bpf/xdp_redirect_map
LD samples/bpf/xdp_redirect
LD samples/bpf/xdp_monitor
/usr/bin/ld: samples/bpf/xdp_sample_user.o: in function `sample_summary_print':
xdp_sample_user.c:(.text+0x84c): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x870): undefined reference to `ceil'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8cf): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8f3): undefined reference to `ceil'
[ more ]
Specify '-lm' as ldflags for all xdp_sample_user.o users in the main
Makefile and remove it from ccflags of ^ in Makefile.target -- just
like it's done for all other samples. This works with all compilers.
Fixes: 6e1051a54e ("samples: bpf: Convert xdp_monitor to XDP samples helper")
Fixes: b926c55d85 ("samples: bpf: Convert xdp_redirect to XDP samples helper")
Fixes: e531a220cc ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Fixes: bbe65865aa ("samples: bpf: Convert xdp_redirect_map to XDP samples helper")
Fixes: 594a116b2a ("samples: bpf: Convert xdp_redirect_map_multi to XDP samples helper")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211203195004.5803-2-alexandr.lobakin@intel.com
The time spent in io_schedule() and also the interrupt latency are
significant when submitting direct I/O to a UFS device. Hence this patch
that implements polling support. User space software can enable polling by
passing the RWF_HIPRI flag to the preadv2() system call or the
IORING_SETUP_IOPOLL flag to the io_uring interface.
Although the block layer supports to partition the tag space for
interrupt-based completions (HCTX_TYPE_DEFAULT) purposes and polling
(HCTX_TYPE_POLL), the choice has been made to use the same hardware queue
for both hctx types because partitioning the tag space would negatively
affect performance.
On my test setup this patch increases IOPS from 2736 to 22000 (8x) for the
following test:
for hipri in 0 1; do
fio --ioengine=io_uring --iodepth=1 --rw=randread \
--runtime=60 --time_based=1 --direct=1 --name=qd1 \
--filename=/dev/block/sda --ioscheduler=none --gtod_reduce=1 \
--norandommap --hipri=$hipri
done
Link: https://lore.kernel.org/r/20211203231950.193369-18-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the clock scaling lock from ufshcd_queuecommand() since it is a
performance bottleneck. Instead check the SCSI device budget bitmaps in the
code that waits for ongoing ufshcd_queuecommand() calls. A bit is set in
sdev->budget_map just before scsi_queue_rq() is called and a bit is cleared
from that bitmap if scsi_queue_rq() does not submit the request or after
the request has finished. See also the blk_mq_{get,put}_dispatch_budget()
calls in the block layer.
There is no risk for a livelock since the block layer delays queue reruns
if queueing a request fails because the SCSI host has been blocked.
Link: https://lore.kernel.org/r/20211203231950.193369-17-bvanassche@acm.org
Cc: Asutosh Das (asd) <asutoshd@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of locking and unlocking the clock scaling lock, surround the
command queueing code with an RCU reader lock and call synchronize_rcu().
This patch prepares for removal of the clock scaling lock.
Link: https://lore.kernel.org/r/20211203231950.193369-16-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel crash:
Unable to handle kernel paging request at virtual address ffffffc91e735000
Call trace:
__queue_work+0x26c/0x624
queue_work_on+0x6c/0xf0
ufshcd_hold+0x12c/0x210
__ufshcd_wl_suspend+0xc0/0x400
ufshcd_wl_shutdown+0xb8/0xcc
device_shutdown+0x184/0x224
kernel_restart+0x4c/0x124
__arm64_sys_reboot+0x194/0x264
el0_svc_common+0xc8/0x1d4
do_el0_svc+0x30/0x8c
el0_svc+0x20/0x30
el0_sync_handler+0x84/0xe4
el0_sync+0x1bc/0x1c0
Fix this crash by ungating the clock before destroying the work queue on
which clock gating work is queued.
Link: https://lore.kernel.org/r/20211203231950.193369-15-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Release resources when aborting a command. Make sure that aborted commands
are completed once by clearing the corresponding tag bit from
hba->outstanding_reqs. This patch is an improved version of commit
3ff1f6b6ba ("scsi: ufs: core: Improve SCSI abort handling").
Link: https://lore.kernel.org/r/20211203231950.193369-14-bvanassche@acm.org
Fixes: 7a3e97b0dc ("[SCSI] ufshcd: UFS Host controller driver")
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The only functional change in this patch is that scsi_done() is now called
after ufshcd_release() and ufshcd_clk_scaling_update_busy() instead of
before.
The next patch in this series will introduce a call to
ufshcd_release_scsi_cmd() in the abort handler.
Link: https://lore.kernel.org/r/20211203231950.193369-13-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality but makes the next patch in
this series easier to read.
Link: https://lore.kernel.org/r/20211203231950.193369-12-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The previous patch removed all code that uses hba->cmd_queue. Hence also
remove hba->cmd_queue itself.
Link: https://lore.kernel.org/r/20211203231950.193369-11-bvanassche@acm.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following deadlock has been observed on a test setup:
- All tags allocated
- The SCSI error handler calls ufshcd_eh_host_reset_handler()
- ufshcd_eh_host_reset_handler() queues work that calls
ufshcd_err_handler()
- ufshcd_err_handler() locks up as follows:
Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt
Call trace:
__switch_to+0x298/0x5d8
__schedule+0x6cc/0xa94
schedule+0x12c/0x298
blk_mq_get_tag+0x210/0x480
__blk_mq_alloc_request+0x1c8/0x284
blk_get_request+0x74/0x134
ufshcd_exec_dev_cmd+0x68/0x640
ufshcd_verify_dev_init+0x68/0x35c
ufshcd_probe_hba+0x12c/0x1cb8
ufshcd_host_reset_and_restore+0x88/0x254
ufshcd_reset_and_restore+0xd0/0x354
ufshcd_err_handler+0x408/0xc58
process_one_work+0x24c/0x66c
worker_thread+0x3e8/0xa4c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved
request.
Link: https://lore.kernel.org/r/20211203231950.193369-10-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for making sdev->host->can_queue less than hba->nutrs. This patch
does not change any functionality.
Link: https://lore.kernel.org/r/20211203231950.193369-9-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use hba->outstanding_reqs instead of ufshcd_any_tag_in_use(). This patch
prepares for removal of the blk_mq_start_request() call from
ufshcd_wait_for_dev_cmd(). blk_mq_tagset_busy_iter() only iterates over
started requests.
Link: https://lore.kernel.org/r/20211203231950.193369-8-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().
Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org
Fixes: 3b1d05807a ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 7252a36030 ("scsi: ufs: Avoid busy-waiting by eliminating tag
conflicts") guarantees that 'tag' is not in use by any SCSI command.
Remove the check that returns early if a conflict occurs.
Link: https://lore.kernel.org/r/20211203231950.193369-6-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the sdev_rpmb member of struct ufs_hba is only used inside
ufshcd_scsi_add_wlus(), convert it into a local variable.
Link: https://lore.kernel.org/r/20211203231950.193369-5-bvanassche@acm.org
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit edc0596cc0 ("scsi: ufs: core: Stop clearing UNIT ATTENTIONS")
removed all callers of is_rpmb_wlun(). Hence also remove the function
itself.
Link: https://lore.kernel.org/r/20211203231950.193369-4-bvanassche@acm.org
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The new name makes it clear what the meaning of the function argument is.
Link: https://lore.kernel.org/r/20211203231950.193369-3-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comment above scsi_device_max_queue_depth() and also the description of
commit ca44532139 ("scsi: core: Make sure sdev->queue_depth is <=
max(shost->can_queue, 1024)") contradict the implementation of the function
scsi_device_max_queue_depth(). Additionally, the maximum queue depth of a
SCSI LUN never exceeds host->can_queue. Fix scsi_device_max_queue_depth()
by changing max_t() into min_t().
Link: https://lore.kernel.org/r/20211203231950.193369-2-bvanassche@acm.org
Fixes: ca44532139 ("scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable r is being assigned a value that is never read. The assignment is
redundant and so is the variable, so remove these. Remove unnecessary the
{} braces in the if statement too.
Link: https://lore.kernel.org/r/20211205225901.54362-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The email addresses of
Subbu Seetharaman <subbu.seetharaman@broadcom.com>
Jitendra Bhivare <jitendra.bhivare@broadcom.com>
are no longer working. Remove Subbu and Jitendra as maintainers.
Link: https://lore.kernel.org/r/20211202201141.cytqe73ish6oa356@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qedi formats SYSFS_FLAG_FW_SEL_BOOT as a byte and the qla4xxx driver does
exactly the same thing. Align them for consistency.
Link: https://lore.kernel.org/r/20211130203813.12138-3-f.fainelli@gmail.com
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The format used for formatting SYSFS_FLAG_FW_SEL_BOOT creates the
following warning:
drivers/scsi/qedi/qedi_main.c:2259:35: warning: format specifies type
'char' but the argument has type 'int' [-Wformat]
rc = snprintf(buf, 3, "%hhd\n",
SYSFS_FLAG_FW_SEL_BOOT);
Fix this to cast the constant as a char since the intention is to print it
via sysfs as a byte.
Link: https://lore.kernel.org/r/20211130203813.12138-2-f.fainelli@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All uses of the 'hisi_hba->slot_index_tags' bitmap are protected with the
'hisi_hba->lock' spinlock.
Prefer the non-atomic '__[set|clear]_bit()' functions to save a few cycles.
Link: https://lore.kernel.org/r/8ee33e463523db080e6a2c06f332e47abb69359b.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'hisi_hba->slot_index_tags' bitmap is allocated with bitmap_zalloc() so
it is already cleared. There is no need to clear it another time, one bit
at a time.
Remove the corresponding useless code.
Link: https://lore.kernel.org/r/41c86e7e3e05a13bd586d8ee1b81296140b7a6eb.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'hisi_hba->slot_index_tags' is a bitmap. Use 'devm_bitmap_zalloc()' to
simplify code, improve the semantic, and avoid some open-coded arithmetic
in allocator arguments.
Link: https://lore.kernel.org/r/4afa3f71e66c941c660627c7f5b0223b51968ebb.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.
Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When CONFIG_DEBUG_INFO_BTF_MODULES is not set
the following warning can be seen:
kernel/bpf/btf.c:6588:13: warning: 'purge_cand_cache' defined but not used [-Wunused-function]
Fix it.
Fixes: 1e89106da2 ("bpf: Add bpf_core_add_cands() and wire it into bpf_core_apply_relo_insn().")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211207014839.6976-1-alexei.starovoitov@gmail.com
