The head-of-line block (HOLB) drop timer is only meaningful when
dropping packets due to blocking is enabled. Given that, redefine
the interface so the timer is specified when enabling HOLB drop, and
use a different function when disabling.
To enable and disable HOLB drop, these functions will now be used:
ipa_endpoint_init_hol_block_enable(endpoint, milliseconds)
ipa_endpoint_init_hol_block_disable(endpoint)
The existing ipa_endpoint_init_hol_block_enable() becomes a helper
function, renamed ipa_endpoint_init_hol_block_en(), and used with
ipa_endpoint_init_hol_block_timer() to enable HOLB block on an
endpoint.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all filter table entries are used. Only certain endpoints
support filtering, and the table begins with a bitmap indicating
which endpoints use the "slots" that follow for filter rules.
Currently, unused filter table entries are not initialized.
Instead, zero-fill the entire unused portion of the filter table
memory regions, to make it more obvious that memory is unused (and
not subsequently modified).
This is not strictly necessary, but the result is reassuring when
looking at filter table memory.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent commit made disabling the SMP2P "setup ready" interrupt
unrelated to ipa_modem_stop(). Given that, it seems fitting to get
rid of ipa_modem_init() and ipa_modem_exit() (which are trivial
wrapper functions), and call ipa_smp2p_init() and ipa_smp2p_exit()
directly instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VSC9959 switch embedded within NXP LS1028A (and that version of
Ocelot switches only) supports cut-through forwarding - meaning it can
start the process of looking up the destination ports for a packet, and
forward towards those ports, before the entire packet has been received
(as opposed to the store-and-forward mode).
The up side is having lower forwarding latency for large packets. The
down side is that frames with FCS errors are forwarded instead of being
dropped. However, erroneous frames do not result in incorrect updates of
the FDB or incorrect policer updates, since these processes are deferred
inside the switch to the end of frame. Since the switch starts the
cut-through forwarding process after all packet headers (including IP,
if any) have been processed, packets with large headers and small
payload do not see the benefit of lower forwarding latency.
There are two cases that need special attention.
The first is when a packet is multicast (or flooded) to multiple
destinations, one of which doesn't have cut-through forwarding enabled.
The switch deals with this automatically by disabling cut-through
forwarding for the frame towards all destination ports.
The second is when a packet is forwarded from a port of lower link speed
towards a port of higher link speed. This is not handled by the hardware
and needs software intervention.
Since we practically need to update the cut-through forwarding domain
from paths that aren't serialized by the rtnl_mutex (phylink
mac_link_down/mac_link_up ops), this means we need to serialize physical
link events with user space updates of bonding/bridging domains.
Enabling cut-through forwarding is done per {egress port, traffic class}.
I don't see any reason why this would be a configurable option as long
as it works without issues, and there doesn't appear to be any user
space configuration tool to toggle this on/off, so this patch enables
cut-through forwarding on all eligible ports and traffic classes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only called takes ocelot_port->bridge and passes it as the "bridge"
argument to this function, which then compares it with
ocelot_port->bridge. This is not useful.
Instead, we would like this function to return 0 if ocelot_port->bridge
is not present, which is what this patch does.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tls: splice_read fixes
As I work my way to unlocked and zero-copy TLS Rx the obvious bugs
in the splice_read implementation get harder and harder to ignore.
This is to say the fixes here are discovered by code inspection,
I'm not aware of anyone actually using splice_read.
====================
Link: https://lore.kernel.org/r/20211124232557.2039757-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous patch fixes overriding callbacks incorrectly. Triggering
the crash in sendpage_locked would be more spectacular but it's
hard to get to, so take the easier path of proving this is broken
and call getname. We're currently getting IPv4 socket info on an
IPv6 socket.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We replace proto_ops whenever TLS is configured for RX. But our
replacement also overrides sendpage_locked, which will crash
unless TX is also configured. Similarly we plug both of those
in for TLS_HW (NIC crypto offload) even tho TLS_HW has a completely
different implementation for TX.
Last but not least we always plug in something based on inet_stream_ops
even though a few of the callbacks differ for IPv6 (getname, release,
bind).
Use a callback building method similar to what we do for struct proto.
Fixes: c46234ebb4 ("tls: RX path for ktls")
Fixes: d4ffb02dee ("net/tls: enable sk_msg redirect to tls socket egress")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
recvmsg() will put peek()ed and partially read records onto the rx_list.
splice_read() needs to consult that list otherwise it may miss data.
Align with recvmsg() and also put partially-read records onto rx_list.
tls_sw_advance_skb() is pretty pointless now and will be removed in
net-next.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We don't support splicing control records. TLS 1.3 changes moved
the record type check into the decrypt if(). The skb may already
be decrypted and still be an alert.
Note that decrypt_skb_update() is idempotent and updates ctx->decrypted
so the if() is pointless.
Reorder the check for decryption errors with the content type check
while touching them. This part is not really a bug, because if
decryption failed in TLS 1.3 content type will be DATA, and for
TLS 1.2 it will be correct. Nevertheless its strange to touch output
before checking if the function has failed.
Fixes: fedf201e12 ("net: tls: Refactor control message handling on recv")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When XDP program is loaded, it is desirable that the previous TX and RX
coalesce values are not re-inited to its default value. This prevents
unnecessary re-configurig the coalesce values that were working fine
before.
Fixes: ac746c8520 ("net: stmmac: enhance XDP ZC driver level switching performance")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211124114019.3949125-1-boon.leong.ong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The node pointer is returned by of_get_child_by_name() with
refcount incremented in tsnep_mdio_init(). Calling of_node_put()
to aovid the refcount leak in tsnep_mdio_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211124084048.175456-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
More missed changes, the response back to another system sending a
command that had no user to handle it wasn't formatted properly.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A couple of issues:
The tested data sizes are wrong; during the design that changed and this
got missed.
The formatting of the reponse couldn't use the normal one, it has to be
an IPMB formatted response.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 059747c245 ("ipmi: Add support for IPMB direct messages")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Populate the supported interfaces bitmap and MAC capabilities mask for
the macb driver and remove the old validate implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mpuRv-00D4rb-Lz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems only XID 609 made it to the mass market. Therefore let's
disable detection of the other RTL8125a XID's. If nobody complains
we can remove support for RTL_GIGA_MAC_VER_60 later.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/2cd3df01-5f8b-08dd-6def-3f31a3014bde@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
content, one error-checking fix for vc4 and two fixes for nouveau, one
to support a new device and another one to properly check for errors.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYZ9i1AAKCRDj7w1vZxhR
xXHHAQDvEFEECNh1xBH7/b2VFrWnJjN+b+WF2Kxu8GGs3xhtlwEAv/mx8IrXZe9y
8W5v3QzIBveZjkp0rORkbe8rpPNGGwE=
=daCZ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-11-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One removal fix for hyperv, one fix in aspeed for the vga_pw sysfs file
content, one error-checking fix for vc4 and two fixes for nouveau, one
to support a new device and another one to properly check for errors.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211125101819.ynu7zgbs7yfwedri@houat
cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Similar to previous patch, just copy over necessary struct into local
stack variable before checking its fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-14-andrii@kernel.org
Buf can be not zero-terminated leading to strstr() to access data beyond
the intended buf[] array. Fix by forcing zero termination.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-12-andrii@kernel.org
Perfbuf doesn't guarantee 8-byte alignment of the data like BPF ringbuf
does, so struct get_stack_trace_t can arrive not properly aligned for
subsequent u64 accesses. Easiest fix is to just copy data locally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-10-andrii@kernel.org
Prevent sanitizer from complaining about passing NULL into memcpy(),
even if it happens with zero size.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-9-andrii@kernel.org
Test is using __int128 variable as unsigned and highest order bit can be
set to 1 after bit shift. Use unsigned __int128 explicitly and prevent
UBSan from complaining.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-8-andrii@kernel.org
add_dst_sec() can invalidate bpf_linker's section index making
dst_symtab pointer pointing into unallocated memory. Reinitialize
dst_symtab pointer on each iteration to make sure it's always valid.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-7-andrii@kernel.org
Sanitizer complains about qsort(), bsearch(), and memcpy() being called
with NULL pointer. This can only happen when the associated number of
elements is zero, so no harm should be done. But still prevent this from
happening to keep sanitizer runs clean from extra noise.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-5-andrii@kernel.org
Perform a memory copy before we do the sanity checks of btf_ext_hdr.
This prevents misaligned memory access if raw btf_ext data is not 4-byte
aligned ([0]).
While at it, also add missing const qualifier.
[0] Closes: https://github.com/libbpf/libbpf/issues/391
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-3-andrii@kernel.org
Conversion is straightforward for most cases. In few cases tests are
using mutable map_flags and attribute structs, but bpf_map_create_opts
can be used in the similar fashion, so there were no problems. Just lots
of repetitive conversions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-5-andrii@kernel.org
xsk.c is using own APIs that are marked for deprecation internally.
Given xsk.c and xsk.h will be gone in libbpf 1.0, there is no reason to
do public vs internal function split just to avoid deprecation warnings.
So just add a pragma to silence deprecation warnings (until the code is
removed completely).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-4-andrii@kernel.org
Mark the entire zoo of low-level map creation APIs for deprecation in
libbpf 0.7 ([0]) and introduce a new bpf_map_create() API that is
OPTS-based (and thus future-proof) and matches the BPF_MAP_CREATE
command name.
While at it, ensure that gen_loader sends map_extra field. Also remove
now unneeded btf_key_type_id/btf_value_type_id logic that libbpf is
doing anyways.
[0] Closes: https://github.com/libbpf/libbpf/issues/282
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-2-andrii@kernel.org
Add selftest that combines two BPF programs within single BPF object
file such that one of the programs is using global variables, but can be
skipped at runtime on old kernels that don't support global data.
Another BPF program is written with the goal to be runnable on very old
kernels and only relies on explicitly accessed BPF maps.
Such test, run against old kernels (e.g., libbpf CI will run it against 4.9
kernel that doesn't support global data), allows to test the approach
and ensure that libbpf doesn't make unnecessary assumption about
necessary kernel features.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211123200105.387855-2-andrii@kernel.org
Load global data maps lazily, if kernel is too old to support global
data. Make sure that programs are still correct by detecting if any of
the to-be-loaded programs have relocation against any of such maps.
This allows to solve the issue ([0]) with bpf_printk() and Clang
generating unnecessary and unreferenced .rodata.strX.Y sections, but it
also goes further along the CO-RE lines, allowing to have a BPF object
in which some code can work on very old kernels and relies only on BPF
maps explicitly, while other BPF programs might enjoy global variable
support. If such programs are correctly set to not load at runtime on
old kernels, bpf_object will load and function correctly now.
[0] https://lore.kernel.org/bpf/CAK-59YFPU3qO+_pXWOH+c1LSA=8WA1yabJZfREjOEXNHAqgXNg@mail.gmail.com/
Fixes: aed659170a ("libbpf: Support multiple .rodata.* and .data.* BPF maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211123200105.387855-1-andrii@kernel.org
If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.
I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.
Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When doing remote name request, we cannot scan. In the normal case it's
OK since we can expect it to finish within a short amount of time.
However, there is a possibility to scan lots of devices that
(1) requires Remote Name Resolve
(2) is unresponsive to Remote Name Resolve
When this happens, we are stuck to do Remote Name Resolve until all is
done before continue scanning.
This patch adds a time limit to stop us spending too long on remote
name request.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
