This complements the struct power_supply_battery_info with
extensive kerneldoc explaining the different semantics of the
fields, including an overview of the CC/CV charging concepts
implicit in some of the struct members.
This is done to first establish semantics before I can
add more charging methods by breaking out the CC/CV parameters
to its own struct.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Kyle Huey recently reported[1] that rr gets confused if SIGKILL prevents
ptrace_signal from delivering a signal, as the kernel setups up a signal
frame for a signal that rr did not have a chance to observe with ptrace.
In looking into it I found a couple of bugs and a quality of
implementation issue.
- The test for signal_group_exit should be inside the for loop in get_signal.
- Signals should be requeued on the same queue they were dequeued from.
- When a fatal signal is pending ptrace_signal should not return another
signal for delivery.
Kyle Huey has verified[2] an earlier version of this change.
I have reworked things one more time to completely fix the issues
raised, and to keep the code maintainable long term.
I have smoke tested this code and combined with a careful review I
expect this code to work fine. Kyle if you can double check that
my last round of changes still works for rr I would appreciate it.
Eric W. Biederman (3):
signal: In get_signal test for signal_group_exit every time through the loop
signal: Requeue signals in the appropriate queue
signal: Requeue ptrace signals
fs/signalfd.c | 5 +++--
include/linux/sched/signal.h | 7 ++++---
kernel/signal.c | 44 ++++++++++++++++++++++++++------------------
3 files changed, 33 insertions(+), 23 deletions(-)
[1] https://lkml.kernel.org/r/20211101034147.6203-1-khuey@kylehuey.com
[2] https://lkml.kernel.org/r/CAP045ApAX725ZfujaK-jJNkfCo5s+oVFpBvNfPJk+DKY8K7d=Q@mail.gmail.com
Tested-by: Kyle Huey <khuey@kylehuey.com>
Link: https://lkml.kernel.org/r/87bl2kekig.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The edp_panel_entry members 'delay' and 'name' are documented, but
without the correct syntax for kernel doc.
This generates the following warnings:
drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'delay' not described in 'edp_panel_entry'
drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'name' not described in 'edp_panel_entry'
Fix them accordingly.
Fixes: 5540cf8f3e ("drm/panel-edp: Implement generic "edp-panel"s probed by EDID")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117163239.529781-1-kieran.bingham+renesas@ideasonboard.com
Through log and waveform, we can see that there will be additional
suspend/resume when booting. This timing does not meet the ps8640 spec.
It seems that the delay of 500ms does not satisfied drm_panel_get_modes.
I increased it to 900ms and it seems that this problem can be solved.
To be safe, I'd just round up to a full 1000.
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112084302.2447931-1-yangcong5@huaqin.corp-partner.google.com
The power supply core appears to contain two open coded
linear interpolations. Use the kernel fixpoint arithmetic
interpolation library function instead.
Cc: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Kyle Huey <me@kylehuey.com> writes:
> rr, a userspace record and replay debugger[0], uses the recorded register
> state at PTRACE_EVENT_EXIT to find the point in time at which to cease
> executing the program during replay.
>
> If a SIGKILL races with processing another signal in get_signal, it is
> possible for the kernel to decline to notify the tracer of the original
> signal. But if the original signal had a handler, the kernel proceeds
> with setting up a signal handler frame as if the tracer had chosen to
> deliver the signal unmodified to the tracee. When the kernel goes to
> execute the signal handler that it has now modified the stack and registers
> for, it will discover the pending SIGKILL, and terminate the tracee
> without executing the handler. When PTRACE_EVENT_EXIT is delivered to
> the tracer, however, the effects of handler setup will be visible to
> the tracer.
>
> Because rr (the tracer) was never notified of the signal, it is not aware
> that a signal handler frame was set up and expects the state of the program
> at PTRACE_EVENT_EXIT to be a state that will be reconstructed naturally
> by allowing the program to execute from the last event. When that fails
> to happen during replay, rr will assert and die.
>
> The following patches add an explicit check for a newly pending SIGKILL
> after the ptracer has been notified and the siglock has been reacquired.
> If this happens, we stop processing the current signal and proceed
> immediately to handling the SIGKILL. This makes the state reported at
> PTRACE_EVENT_EXIT the unmodified state of the program, and also avoids the
> work to set up a signal handler frame that will never be used.
>
> [0] https://rr-project.org/
The problem is that while the traced process makes it into ptrace_stop,
the tracee is killed before the tracer manages to wait for the
tracee and discover which signal was about to be delivered.
More generally the problem is that while siglock was dropped a signal
with process wide effect is short cirucit delivered to the entire
process killing it, but the process continues to try and deliver another
signal.
In general it impossible to avoid all cases where work is performed
after the process has been killed. In particular if the process is
killed after get_signal returns the code will simply not know it has
been killed until after delivering the signal frame to userspace.
On the other hand when the code has already discovered the process
has been killed and taken user space visible action that shows
the kernel knows the process has been killed, it is just silly
to then write the signal frame to the user space stack.
Instead of being silly detect the process has been killed
in ptrace_signal and requeue the signal so the code can pretend
it was simply never dequeued for delivery.
To test the process has been killed I use fatal_signal_pending rather
than signal_group_exit to match the test in signal_pending_state which
is used in schedule which is where ptrace_stop detects the process has
been killed.
Requeuing the signal so the code can pretend it was simply never
dequeued improves the user space visible behavior that has been
present since ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4").
Kyle Huey verified that this change in behavior and makes rr happy.
Reported-by: Kyle Huey <khuey@kylehuey.com>
Reported-by: Marko Mäkelä <marko.makela@mariadb.com>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gi
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87tugcd5p2.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In the event that a tracer changes which signal needs to be delivered
and that signal is currently blocked then the signal needs to be
requeued for later delivery.
With the advent of CLONE_THREAD the kernel has 2 signal queues per
task. The per process queue and the per task queue. Update the code
so that if the signal is removed from the per process queue it is
requeued on the per process queue. This is necessary to make it
appear the signal was never dequeued.
The rr debugger reasonably believes that the state of the process from
the last ptrace_stop it observed until PTRACE_EVENT_EXIT can be recreated
by simply letting a process run. If a SIGKILL interrupts a ptrace_stop
this is not true today.
So return signals to their original queue in ptrace_signal so that
signals that are not delivered appear like they were never dequeued.
Fixes: 794aa320b79d ("[PATCH] sigfix-2.5.40-D6")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gi
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87zgq4d5r4.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=beJ8
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfix from Bruce Fields:
"This is just one bugfix for a buffer overflow in knfsd's xdr decoding"
* tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux:
NFSD: Fix exposure in nfsd4_decode_bitmap()
'priv->workqueue' is destroyed in the error handling path of the probe but
not in the remove function.
Add the missing call to release some resources.
Cc: stable <stable@vger.kernel.org>
Fixes: 2df7062002 ("remoteproc: imx_proc: enable virtio/mailbox")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/d28ca94a4031bd7297d47c2164e18885a5a6ec19.1634366546.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use %pe format string to print return error code which
make the error message easier to understand.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20211102141535.28372-1-mark-pk.tsai@mediatek.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[Fixed capital letter in subject line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is needed for some arches, as reported by Geert Uytterhoeven,
Randy Dunlap and Stephen Rothwell
Fixes: 4721031c35 ("net: move gro definitions to include/net/gro.h")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211117100130.2368319-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently while investigating a problem with rr and signals I noticed
that siglock is dropped in ptrace_signal and get_signal does not jump
to relock.
Looking farther to see if the problem is anywhere else I see that
do_signal_stop also returns if signal_group_exit is true. I believe
that test can now never be true, but it is a bit hard to trace
through and be certain.
Testing signal_group_exit is not expensive, so move the test for
signal_group_exit into the for loop inside of get_signal to ensure
the test is never skipped improperly.
This has been a potential problem since I added the test for
signal_group_exit was added.
Fixes: 35634ffa17 ("signal: Always notice exiting tasks")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/875yssekcd.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Currently there are two very similar approaches in use by this driver:
img_pwm_config() uses pm_runtime_get_sync() and calls
pm_runtime_put_autosuspend() in the error path; img_pwm_enable() calls
pm_runtime_resume_and_get() which already puts the reference in its own
error path.
Align pm_runtime usage and use the same idiom in both locations.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Commit c045ceb5a1 ("reset: tegra-bpmp: Handle errors in BPMP
response") fixed an issue in the Tegra BPMP error handling but has
exposed an issue in the Tegra194 HDA driver and now resetting the
Tegra194 HDA controller is failing. For now revert the commit
c045ceb5a1 ("reset: tegra-bpmp: Handle errors in BPMP response")
while a fix for the Tegra HDA driver is created.
Fixes: c045ceb5a1 ("reset: tegra-bpmp: Handle errors in BPMP response")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211112112712.21587-1-jonathanh@nvidia.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply(). This just pushes down a slightly
optimized variant of how legacy drivers are handled in the core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply(). This just pushes down a slightly
optimized variant of how legacy drivers are handled in the core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply(). This just pushes down a slightly
optimized variant of how legacy drivers are handled in the core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
It is not entirely accurate to go back to the initial state after e.g.
.enable() failed, as .config() still modified the hardware, but this same
inconsistency exists for drivers that implement .apply().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
If a running PWM is reconfigured to disabled calling the ->config()
callback before disabling the hardware might result in a glitch where
the (maybe) new period and duty_cycle are visible on the output before
disabling the hardware.
So handle disabling before calling ->config(). Also exit early in this case
which is possible because period and duty_cycle don't matter for disabled PWMs.
In return however ->config has to be called even if state->period ==
pwm->state.period && state->duty_cycle != pwm->state.duty_cycle because setting
these might have been skipped in the previous call.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
There is no change in behaviour, only some code is moved from
pwm_apply_state to a separate function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Provide improved mailbox communication, between PF and VF,
which is defined as API version 1.5.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Improve reliability of the mailbox communication and remove
its potential flaws that may lead to the undefined or faulty behavior.
Recently some users reported issues on ESX with 10G Intel NICs which were
found to be caused by incorrect implementation of the PF-VF mailbox
communication.
Technical investigation highlighted areas to improve in the communication
between PF or VF that wants to send the message (sender) and the other
part which receives the message (receiver):
- Locking the mailbox when the sender wants to send a message
- Releasing the mailbox when the communication ends
- Returning the result of the mailbox message execution
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add legacy suffix to mailbox functions which should be backwards compatible
with older PF drivers. Communication during API negotiation always has to
be done using the earlier implementation.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add new handling for error codes:
IXGBE_ERR_CONFIG - ixgbe_mbx_operations is not correctly set
IXGBE_ERR_TIMEOUT - mailbox operation, e.g. poll for message, timeout
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is name similarity within IXGBE_VT_MSGTYPE_ACK and
PFMAILBOX.ACK / VFMAILBOX.ACK. MSGTYPE macros are renamed to SUCCESS and
FAILURE because they are not specified in datasheet and now will be
easily distinguishable.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Revert commit c10383e8dd ("ACPI: scan: Release PM resources blocked
by unused objects"), because it causes boot issues to appear on some
platforms.
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Reported-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).
This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.
This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:
$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 64
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 64
$ ethtool -L ens801f0 combined 40
[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!
Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.
Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.
For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.
Fixes: ba4e003d29 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The intel_engine_create_virtual() function does not return NULL. It
returns error pointers.
Fixes: e5e32171a2 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116114916.GB11936@kili
Orange Pi Zero Plus uses a Realtek RTL8211E RGMII Gigabit PHY, but its
currently set to plain RGMII mode meaning that it doesn't introduce
delays.
With this setup, TX packets are completely lost and changing the mode to
RGMII-ID so the PHY will add delays internally fixes the issue.
Fixes: a7affb13b2 ("arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ron Goossens <rgoossens@gmail.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211117140222.43692-1-robert.marko@sartura.hr
Instead of setting a bit in the fs_flags to set a bit in the
address_space, set the bit in the address_space directly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.
Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().
More functions should have their default implementations moved in the
future, but those are for follow-on patches. This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().
Fixes: 08b0b0059b ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Export the zynqmp_pm_feature(), so it can be use by other as to get API
version available in firmware.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211026042525.26612-4-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add macros for the Node-Id of Error events.
Move supported api callback ids from zynqmp-power to zynqmp-firmware.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211026042525.26612-3-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In zynqmp-firmware, register notifier is not supported, add support of
register notifier in zynqmp-firmware.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20211026042525.26612-2-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add KUnit tests for the contiguous physical memory regions merging
functionality from the Nitro Enclaves misc device logic.
We can build the test binary with the following configuration:
CONFIG_KUNIT=y
CONFIG_NITRO_ENCLAVES=m
CONFIG_NITRO_ENCLAVES_MISC_DEV_TEST=y
and install the nitro_enclaves module to run the testcases.
We'll see the following message using dmesg if everything goes well:
[...] # Subtest: ne_misc_dev_test
[...] 1..1
[...] (NULL device *): Physical mem region address is not 2 MiB aligned
[...] (NULL device *): Physical mem region size is not multiple of 2 MiB
[...] (NULL device *): Physical mem region address is not 2 MiB aligned
[...] ok 1 - ne_misc_dev_test_merge_phys_contig_memory_regions
[...] ok 1 - ne_misc_dev_test
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-5-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the initial setup for the KUnit tests that will target the Nitro
Enclaves misc device functionality.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-4-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanity check the physical memory regions during the merge of contiguous
regions. Thus we can test the physical memory regions setup logic
individually, including the error cases coming from the sanity checks.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-3-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There can be cases when there are more memory regions that need to be
set for an enclave than the maximum supported number of memory regions
per enclave. One example can be when the memory regions are backed by 2
MiB hugepages (the minimum supported hugepage size).
Let's merge the adjacent regions if they are physically contiguous. This
way the final number of memory regions is less than before merging and
could potentially avoid reaching maximum.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-2-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d57f5c7e362837a8dfcde0d726a76b56f114e619.1636736947.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a partial revert of commit
29bc22ac5e ("binder: use euid from cred instead of using task").
Setting sender_euid using proc->cred caused some Android system test
regressions that need further investigation. It is a partial
reversion because subsequent patches rely on proc->cred.
Fixes: 29bc22ac5e ("binder: use euid from cred instead of using task")
Cc: stable@vger.kernel.org # 4.4+
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: I9b1769a3510fed250bb21859ef8beebabe034c66
Link: https://lore.kernel.org/r/20211112180720.2858135-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet says:
====================
net: make dev_watchdog() less intrusive
dev_watchdog() is used on many NIC to periodically monitor TX queues
to detect hangs.
Problem is : It stops all queues, then check them, then 'unfreeze' them.
Not only this stops feeding the NIC, it also migrates all qdiscs
to be serviced on the cpu calling netif_tx_unlock(), causing
a potential latency artifact.
With many TX queues, this is becoming more visible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
