Use the coding style for the comments at this file.
While here, drop a do-nothing if logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that the input system always declare rx_cfg_t, we can
remove the ifdef ISP2401 from this header.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several stucts under ISP2400 that could be moved
to the global file without causing any build issues.
Move those to the common header, in order to reduce the number
of things that are #ifdef dependent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
ia_css_dequeue_event() is just an alias to ia_css_dequeue_psys_event(),
and atomisp_css_dequeue_event() do nothing but calling the event
dequeue logic.
Get rid of both abstractions, calling the function directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The succ var tracks memory allocation erros on this function.
Fix it, in order to stop this W=1 Werror in clang:
drivers/staging/media/atomisp/pci/sh_css_params.c:2430:7: error: variable 'succ' set but not used [-Werror,-Wunused-but-set-variable]
bool succ = true;
^
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Allow the sensor to report the per-resolution frame interval.
It should be noticed that, despite the ov2680 datasheet says
that, for resolutions <= 1280x720, the sensor supports 60fps,
the data at ov2680.h tells otherwise, limiting it to 30fps.
Not sure yet if this is a limitation of atomisp or if it is
just because the tables are incorrect.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The ov2680 supports a maximum bandwidth of 660Mbps and allows
up to 60fps when the resolution is below 720p.
Adjust the sensor's table to reflect that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The sensor resolution arrays have two unused fields. Drop them.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several resolutions defined for this sensor, but just
two are currently uncommented. Change the driver to allow other
resolutions to also be used.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this clang Werror with W=1:
drivers/staging/media/atomisp/i2c/atomisp-gc2235.c:573:6: error: variable 'ret' set but not used [-Werror,-Wunused-but-set-variable]
int ret = -1;
^
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this clang Werror with W=1:
drivers/staging/media/ipu3/ipu3-css-params.c:774:8: error: variable 'pin_scale' set but not used [-Werror,-Wunused-but-set-variable]
int pin_scale = 0;
^
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since the DW_SPI_CAP_DWC_HSSI capability has just been replaced with using
the DW SSI IP-core versions interface, the DW SPI capability flags are now
represented with a gap. Let's fix it by redefining the DW_SPI_CAP_DFS32
macro to setting BIT(2) of the capabilities field.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115181917.7521-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there is a common IP-core and component versions interface available
we can use it to differentiate the DW HSSI device features in the code.
Let's remove the corresponding DWC_HSSI capability flag then and use the
dw_spi_ip_is() macro instead.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115181917.7521-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently supports two IP-core versions. It's DW APB SSI which
is older version of the controller with APB system bus interface, and DW
SSI controller with AHB bus interface. The later one is supposed to be a
new generation high-speed SSI. Even though both of these IP-cores have got
an almost identical registers space there are some differences. The driver
differentiates these distinctions by the DW_SPI_CAP_DWC_HSSI capability
flag. In addition to that each DW SSI IP-core is equipped with a Synopsys
Component version register, which encodes the IP-core release ID the has
been synthesized from. Seeing we are going to need the later one to
differentiate some controller peculiarities it would be better to have a
unified interface for both IP-core line and release versions instead of
using each of them separately.
Introduced here IP-core versioning interface consists of two parts:
1) IDs of the IP-core (virtual) and component versions.
2) a set of macro helpers to identify current IP-core and component
versions.
So the platform code is supposed to assign a proper IP-core version based
on it's platform -knowledge. The main driver initialization method reads
the IP-core release ID from the SSI component version register. That data
is used by the helpers to distinguish one IP-core release from another.
Thus the rest of the driver can use these macros to implement the
conditional code execution based on the specified IP-core and version IDs.
Collect the IP-core versions interface and the defined capabilities at the
top of the header file since they represent a common device description
data and so to immediately available for the driver hackers.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115181917.7521-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has been using the offset/bitwise-shift-based approach for the
CSR fields R/W operations since it was merged into the kernel. It can be
simplified by using the macros defined in the linux/bitfield.h and
linux/bit.h header files like BIT(), GENMASK(), FIELD_PREP(), FIELD_GET(),
etc where it is required, for instance in the cached cr0 preparation
method. Thus in order to have the FIELD_*()-macros utilized we just need
to convert the macros with the CSR-fields offsets to the masks with the
corresponding registers fields definition. That's where the GENMASK() and
BIT() macros come in handy. After that the masks can be used in the
FIELD_*()-macros where it's appropriate.
We also need to convert the macros with the CRS-bit flags using the manual
bitwise shift operations (x << y) to using the BIT() macro. Thus we'll
have a more coherent set of the CSR-related macros.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115181917.7521-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Mostly due to a long driver history it's methods and macro names look a
bit messy. In particularly that concerns the code their prefixes. A
biggest part of the driver functions and macros have got the dw_spi/DW_SPI
prefixes. But there are some entities which have been just
"spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields
macro definitions. It makes the code harder to comprehend since such
methods and macros can be easily confused with the global SPI-subsystem
exports. In this case the only possible way to more or less quickly
distinguish one naming space from another is either by context or by the
argument type, which most of the times isn't that easy anyway. In addition
to that a new DW SSI IP-core support has been added in the framework of
commit e539f435cb ("spi: dw: Add support for DesignWare DWC_ssi"), which
introduced a new set or macro-prefixes to describe CTRLR0-specific fields
and worsen the situation. Finally there are methods with
no DW SPI driver-reference prefix at all, that make the code reading even
harder. So in order to ease the driver hacking let's bring the code naming
to a common base:
1) Each method is supposed to have "dw_spi_" prefix so to be easily
distinguished from the kernel API, e.g. SPI-subsystem methods and macros.
(Exception is the local implementation of the readl/writel methods since
being just the regspace accessors.)
2) Each generically used macro should have DW_SPI_-prefix thus being
easily comprehended as the local driver definition.
3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_
and DW_HSSI_ respectively so referring to the system buses they support
(APB and AHB similarly to the DT clocks naming like pclk, hclk).
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The dw_ssi_type enumeration describes the SPI frame formats the controller
supports, like Motorola SPI, Texas Instruments SSP and National
Semiconductors Microwire, that is the serial protocol utilized for the
SPI-transfers. Depending on the DW SSI IP-core configuration the protocol
could be either fixed or selectable. If it is changebale the protocol can
be selected by means of the CTRL0.FRF field, which possible values encoded
by the dw_ssi_type enumeration. Aside with the denoted enum the field
values are also described by a set of SPI_FRF_{SPI,SSP,MICROWIRE} macros.
Thus currently the DW SPI driver has got two entities describing the same
data. Let's get rid of the enumeration one then, since first it hasn't
been used as enumeration-type but merely as a parametrized values set and
second that would unify the macro-based CSR read/write interface of the
driver. While at it convert the macro names to be more descriptive about
the protocols they represent.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115181917.7521-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The exported from the DW SPI driver core/DMA symbols are only used by the
spi-dw-{mmio,pci,bt1}.o objects. Add these symbols to a separate
namespace then and make sure the depended modules have it imported.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211115181917.7521-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
When an i2c remove callback fails, the i2c core emits a generic error
message and still removes the device. Apart from the message there the
return value isn't further used.
So don't return an error code after having already emitted a driver
specific warning about the problem to prevent two messages about the
same issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211116110951.1213566-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the Intel example and simplify the Kconfig
a) start from the end-product for 'select' chains
b) use 'depends on' to filter out configurations.
c) use snd-sof-of as a common module without any 'select'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116124131.46414-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently same slim channel map setup for every dai link, which is redundant.
Fix this by adding a flag and conditionally setting these channel maps.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116115021.14213-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we ended up using snd_soc_component_write_field
for HPHL and snd_soc_component_update_bits for HPHR, so fix this.
Fixes: af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114623.11891-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Error returned from wcd934x_slim_set_hw_params() are not passed to upper layer,
this could be misleading to the user which can start sending stream leading
to unnecessary errors.
Fix this by properly returning the errors.
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114623.11891-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Interrupt Clear registers WCD938X_INTR_CLEAR_0 - WCD938X_INTR_CLEAR_2
are not marked as volatile. This has resulted in a missing interrupt bug
while performing runtime pm. regcache_sync() during runtime pm resume path
will write to Interrupt clear registers with previous values which basically
clears the pending interrupt and actual interrupt handler never sees this
interrupt.
This issue is more visible with headset plug-in plug-out case compared to
headset button.
Fix this by adding the Interrupt clear registers to volatile range
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114623.11891-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 8a9782346d ("ASoC: topology: Add topology core")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Error handling in q6asm_dai_prepare() seems to be completely broken,
Fix this by handling it properly.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stream IDs are reused across multiple BackEnd mixers, do not reset the
stream mixers if they are not already set for that particular FrontEnd.
Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below
command will reset previously setup MultiMedia1 stream, because both of them
are using MultiMedia1 PCM stream.
amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0
reset the FrontEnd Mixers conditionally to fix this issue.
This is more noticeable in desktop setup, where in alsactl tries to restore
the alsa state and overwriting the previous mixer settings.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Q6PRM clks need to be disabled using PRM_CMD_RELEASE_HW_RSC dsp command
rather then using PRM_CMD_RSP_REQUEST_HW_RSC cmd with rate set to zero.
DSP will throw errors if we try to disable the clock using existing code.
Fix this by properly handling the clk release.
Fixes: 9a0e5d6fb1 ("ASoC: qdsp6: audioreach: add q6prm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).
drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
data->wde_interval = 300L * 1E6L;
^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
data->wde_interval = 300L * 1E6L;
^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
data->trigger_delay = ktime_set(2, 500L*1E6L);
^
3 errors generated.
This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.
There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.
Fixes: 6647156c00 ("power: reset: add LTC2952 poweroff driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: a8083d42b1
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
We should clear the flag if the adv instance removed due to receiving
this error status is the last one we have.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This event is received when the controller stops advertising,
specifically for these three reasons:
(a) Connection is successfully created (success).
(b) Timeout is reached (error).
(c) Number of advertising events is reached (error).
(*) This event is NOT generated when the host stops the advertisement.
Refer to the BT spec ver 5.3 vol 4 part E sec 7.7.65.18. Note that the
section was revised from BT spec ver 5.0 vol 2 part E sec 7.7.65.18
which was ambiguous about (*).
Some chips (e.g. RTL8822CE) send this event when the host stops the
advertisement with status = HCI_ERROR_CANCELLED_BY_HOST (due to (*)
above). This is treated as an error and the advertisement will be
removed and userspace will be informed via MGMT event.
On suspend, we are supposed to temporarily disable advertisements,
and continue advertising on resume. However, due to the behavior
above, the advertisements are removed instead.
This patch returns early if HCI_ERROR_CANCELLED_BY_HOST is received.
Btmon snippet of the unexpected behavior:
@ MGMT Command: Remove Advertising (0x003f) plen 1
Instance: 1
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Disabled (0x00)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x01
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: LE Meta Event (0x3e) plen 6
LE Advertising Set Terminated (0x12)
Status: Operation Cancelled by Host (0x44)
Handle: 1
Connection handle: 0
Number of completed extended advertising events: 5
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
Status: Success (0x00)
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This work is no longer necessary since all the code using it has been
converted to use hci_passive_scan/hci_passive_scan_sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This makes MGMT_OP_SET_CONNEABLE use hci_cmd_sync_queue instead of
use a dedicated connetable_update work.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This makes MGMT_OP_SET_DISCOVERABLE use hci_cmd_sync_queue instead of
use a dedicated discoverable_update work.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Do not use "/**" to begin a non-kernel-doc comment.
Fixes this build warning:
drivers/bluetooth/btmrvl_main.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Convert power-off action connected to the GPIO documentation to the YAML syntax.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add benchmark to measure overhead of uprobes and uretprobes. Also have
a baseline (no uprobe attached) benchmark.
On my dev machine, baseline benchmark can trigger 130M user_target()
invocations. When uprobe is attached, this falls to just 700K. With
uretprobe, we get down to 520K:
$ sudo ./bench trig-uprobe-base -a
Summary: hits 131.289 ± 2.872M/s
# UPROBE
$ sudo ./bench -a trig-uprobe-without-nop
Summary: hits 0.729 ± 0.007M/s
$ sudo ./bench -a trig-uprobe-with-nop
Summary: hits 1.798 ± 0.017M/s
# URETPROBE
$ sudo ./bench -a trig-uretprobe-without-nop
Summary: hits 0.508 ± 0.012M/s
$ sudo ./bench -a trig-uretprobe-with-nop
Summary: hits 0.883 ± 0.008M/s
So there is almost 2.5x performance difference between probing nop vs
non-nop instruction for entry uprobe. And 1.7x difference for uretprobe.
This means that non-nop uprobe overhead is around 1.4 microseconds for uprobe
and 2 microseconds for non-nop uretprobe.
For nop variants, uprobe and uretprobe overhead is down to 0.556 and
1.13 microseconds, respectively.
For comparison, just doing a very low-overhead syscall (with no BPF
programs attached anywhere) gives:
$ sudo ./bench trig-base -a
Summary: hits 4.830 ± 0.036M/s
So uprobes are about 2.67x slower than pure context switch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211116013041.4072571-1-andrii@kernel.org
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-11-15
This series contains updates to iavf driver only.
Mateusz adds a wait for reset completion when changing queue count which
could otherwise cause issues with VF reset.
Nick adds a null check for vf_res in iavf_fix_features(), corrects
ordering of function calls to resolve dependency issues, and prevents
possible freeing of a lock which isn't being held.
Piotr fixes logic that did not allow setting all multicast mode without
promiscuous mode.
Jake prevents possible accidental freeing of filter structure.
Mitch adds null checks for key and indir parameters in iavf_get_rxfh().
Surabhi adds an additional check that would, previously, cause the driver
to print a false error due to values obtained while the VF is in reset.
Grzegorz prevents a queue request of 0 which would cause queue count to
reset to default values.
Akeem restores VLAN filters when bringing the interface back up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
net: prot_inuse and sock_inuse cleanups
Small series cleaning and optimizing sock_prot_inuse_add()
and sock_inuse_add().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is distracting really, let's make this simpler,
because many callers had to take care of this
by themselves, even if on x86 this adds more
code than really needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net->core.sock_inuse is a per cpu variable (int),
while net->core.prot_inuse is another per cpu variable
of 64 integers.
per cpu allocator tend to place them in very different places.
Grouping them together makes sense, since it makes
updates potentially faster, if hitting the same
cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP hard codes it, let us instead provide this helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sock_prot_inuse_add() is very small, we can inline it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
gro: get out of core files
Move GRO related content into net/core/gro.c
and include/net/gro.h.
This reduces GRO scope to where it is really needed,
and shrinks too big files (include/linux/netdevice.h
and net/core/dev.c)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Move gro code and data from net/core/dev.c to net/core/gro.c
to ease maintenance.
gro_normal_list() and gro_normal_one() are inlined
because they are called from both files.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
