Add bindings document for LED support on MT6360 PMIC
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The Exynos ChipID driver, like most of the Exynos drivers, uses one
compatible for entire family of compatible devices using one devicetree
"compatible". The compatibility is here described by programming
interface (register layout), not by actual values, so the product ID
register on one family of devices has different values for different
SoCs.
Describe which SoC goes with which compatible for documentation
purposes, if the DTS is not available in mainline.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211031205212.59505-1-krzysztof.kozlowski@canonical.com
Smatch says:
bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
warn: variable dereferenced before check 'ilt' (see line 638)
Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.
Fixes: 523224a3b3 ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the CFLAGS options were incorrectly removed in the recent rework
of the GPIO selftests. While some of the flags were specific to the old
implementation the remainder are still relevant. Restore those options.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
When compiled with -Wall gpio-mockup-cdev.c reports an uninitialised
variable warning. This is a false positive, as the variable is ignored
in the case it is uninitialised, but initialise the variable anyway
to remove the warning.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio selftests build against the system includes rather than the
headers from the linux tree. This results in the compile failing if
the system includes are outdated.
Prefer the headers from the linux tree, as per other selftests.
Fixes: 8bc395a6a2 ("selftests: gpio: rework and simplify test implementation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
[Kent: reworded commit comment and added Fixes:]
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Netlogic XLP was removed in commit 95b8a5e011 ("MIPS: Remove NETLOGIC
support"). With those gone, the single platform left to support is
Cavium ThunderX2. Remove the Netlogic variant and DT support.
For simplicity, the existing kconfig name is retained.
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211109161325.2203564-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The requested DMA channels are never released. Do this in .remove as well
as in .probe. spi_register_controller() can return -EPROBE_DEFER if
cs-gpios are not probed yet.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211109103134.184216-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 6acaadc852 ("spi: clps711x: Driver refactor") removed the only use
of <linux/platform_data/spi-clps711x.h>, but left the header file behind.
This file is unused, delete it.
Cc: Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211102220203.940290-9-corbet@lwn.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Some device requires a special handling for reg_update_bits and can't use
the normal regmap read write logic. An example is when locking is
handled by the device and rmw operations requires to do atomic operations.
Allow to declare a dedicated function in regmap_config for
reg_update_bits in no bus configuration.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20211104150040.1260-1-ansuelsmth@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SMC fallback is incomplete currently. There may be some
wait queue entries remaining in smc socket->wq, which should
be removed to clcsocket->wq during the fallback.
For example, in nginx/wrk benchmark, this issue causes an
all-zeros test result:
server: nginx -g 'daemon off;'
client: smc_run wrk -c 1 -t 1 -d 5 http://11.200.15.93/index.html
Running 5s test @ http://11.200.15.93/index.html
1 threads and 1 connections
Thread Stats Avg Stdev Max ± Stdev
Latency 0.00us 0.00us 0.00us -nan%
Req/Sec 0.00 0.00 0.00 -nan%
0 requests in 5.00s, 0.00B read
Requests/sec: 0.00
Transfer/sec: 0.00B
The reason for this all-zeros result is that when wrk used SMC
to replace TCP, it added an eppoll_entry into smc socket->wq
and expected to be notified if epoll events like EPOLL_IN/
EPOLL_OUT occurred on the smc socket.
However, once a fallback occurred, wrk switches to use clcsocket.
Now it is clcsocket->wq instead of smc socket->wq which will
be woken up. The eppoll_entry remaining in smc socket->wq does
not work anymore and wrk stops the test.
This patch fixes this issue by removing remaining wait queue
entries from smc socket->wq to clcsocket->wq during the fallback.
Link: https://www.spinics.net/lists/netdev/msg779769.html
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We assume the adr order described in a snd_soc_acpi_link_adr array is
jack -> amp -> mic. We follow the same order to implement the topology.
We will need a special topology if we configure a snd_soc_acpi_link_adr
array with different order. Adding a check and a warning message can
remind people to keep the order when adding a new snd_soc_acpi_link_adr
array.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI link id will not be set from sdw codec init feedback function,
and be_id is changed by create_sdw_dailink() now. So we don't need
get_next_be_id() anymore.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can apply the fixed dai link id for DMICs in create_sdw_dailink().
No need to set it in each DMIC's callback.
The fixed dai link id is not only for rt715 and rt715-sdca, but for all
DMICs, therefore we remove the SOF_RT715_DAI_ID_FIX check as well.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we assign SoundWire DAI link id according to the order in
the link address table, with the assumption that the headset codec is
listed first, then amplifiers and last capture devices. If the headset
codec is not present in a platform, the dai link for amplifiers will be
shifted, which can be handled in two ways
a) modify the topology to renumber the dailink changes
b) keep the dailink numbers constant in topology but also avoid the
variations in the machine driver.
This patch adds support for option b), the dailink index for amplifiers
and capture devices becomes fixed.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link_id variable in sof_card_dai_links_create() and be_index argument
in create_sdw_dailink() is actually links' index. Rename them to link_index
to be consistent.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tests on device show the JD2 mode does not work at all, the 'Headphone
Jack' and 'Headset Mic Jack' are shown as 'on' always.
JD1 seems to be the better option, with at least a change between the
two cases.
Jack not plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=12
numid=12,iface=CARD,name='Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
Jack plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
The 'Headset Mic Jack' is updated with a delay which seems normal with
additional calibration needed.
Fixes: d92e279dee ('ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't want to convert create_sdw_dailink()'s return value to -ENOMEM.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Send the DMA_TRACE_FREE IPC during release to stop and free the trace
DMA in the DSP.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse all the trace DMA IPC commands in ipc_log_header().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new SOF_IPC_TRACE_DMA_FREE IPC command to stop and free trace DMA
in the FW.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some OEM use a GPIO in addition to the tfa9897 RCV bit to
switch between loudspeaker and earpiece/receiver mode.
Add support for the GPIO switching by specifying rcv-gpios in DT.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211031210956.812101-3-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Alex Elder says:
====================
net: ipa: HOLB register write fixes
This small series fixes two recently identified bugs related to the
way two registers must be written. The registers define whether and
when to drop packets if a head-of-line blocking condition is
encountered. The "enable" (dropping packets) register must be
written twice for newer versions of hardware. And the timer
register must not be written while dropping is enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The head-of-line blocking timer should only be modified when
head-of-line drop is disabled.
One of the steps in recovering from a modem crash is to enable
dropping of packets with timeout of 0 (immediate). We don't know
how the modem configured its endpoints, so before we program the
timer, we need to ensure HOL_BLOCK is disabled.
Fixes: 84f9bd12d4 ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Starting with IPA v4.5, the HOL_BLOCK_EN register must be written
twice when enabling head-of-line blocking avoidance.
Fixes: 84f9bd12d4 ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed comments to match description with variable names and
refactored code to match the convention as per [1].
To match the convention mapping is done as follows:
State 3 - LOST_IN_BURST_PERIOD
State 4 - LOST_IN_GAP_PERIOD
[1] S. Salsano, F. Ludovici, A. Ordine, "Definition of a general
and intuitive loss model for packet networks and its implementation
in the Netem module in the Linux kernel"
Fixes: a6e2fe17eb ("sch_netem: replace magic numbers with enumerate")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should not go on looking for more capacity tables after
we realize we have looked at the last one in
power_supply_find_ocv2cap_table().
Fixes: 3afb50d712 ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Cc: Chunyan Zhang <chunyan.zhang@unisoc.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
vsc73xx_remove() returns zero unconditionally and no caller checks the
returned value. So convert the function to return no value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch away from using the deprecated 'host-wakeup-gpios' property,
and use a 'host-wakeup' interrupt instead, as suggested by the binding
documentation.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211031234137.87070-2-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The reset GPIO was marked active-high, which is against what's specified
in the documentation. Mark the reset GPIO as active-low. With this
change, Bluetooth can now be used on the i9100.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211031234137.87070-1-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Include the header with prototype of s3c2410_modify_misccr to fix W=1
warning:
arch/arm/mach-s3c/gpio-samsung.c:1309:14: warning:
no previous prototype for ‘s3c2410_modify_misccr’ [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211111091123.50853-1-krzysztof.kozlowski@canonical.com
As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
Drivers that use NETIF_F_LLTX flag must also update
netdev_queue->trans_start. If they do not, then the ARP monitor will
immediately fail any slaves using that driver, and those slaves will stay
down.
Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some functions, like tipc_crypto_start use inconsisten GFP flags
when allocating memory. The mentioned function use GFP_ATOMIC to
to alloc a crypto instance, and then calls alloc_ordered_workqueue()
which allocates memory with GFP_KERNEL. tipc_aead_init() function
even uses GFP_KERNEL and GFP_ATOMIC interchangeably.
No doc comment specifies what context a function is designed to
work in, but the flags should at least be consistent within a function.
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: tipc-discussion@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous stmmac_xdp_set_prog() implementation uses stmmac_release()
and stmmac_open() which tear down the PHY device and causes undesirable
autonegotiation which causes a delay whenever AFXDP ZC is setup.
This patch introduces two new functions that just sufficiently tear
down DMA descriptors, buffer, NAPI process, and IRQs and reestablish
them accordingly in both stmmac_xdp_release() and stammac_xdp_open().
As the results of this enhancement, we get rid of transient state
introduced by the link auto-negotiation:
$ ./xdpsock -i eth0 -t -z
sock0@eth0:0 txonly xdp-drv
pps pkts 1.00
rx 0 0
tx 634444 634560
sock0@eth0:0 txonly xdp-drv
pps pkts 1.00
rx 0 0
tx 632330 1267072
sock0@eth0:0 txonly xdp-drv
pps pkts 1.00
rx 0 0
tx 632438 1899584
sock0@eth0:0 txonly xdp-drv
pps pkts 1.00
rx 0 0
tx 632502 2532160
Reported-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly check for MSR_HYPERCALL and MSR_VP_INDEX support when probing
for running as a Hyper-V guest instead of waiting until hyperv_init() to
detect the bogus configuration. Add messages to give the admin a heads
up that they are likely running on a broken virtual machine setup.
At best, silently disabling Hyper-V is confusing and difficult to debug,
e.g. the kernel _says_ it's using all these fancy Hyper-V features, but
always falls back to the native versions. At worst, the half baked setup
will crash/hang the kernel.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20211104182239.1302956-3-seanjc@google.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Baihua reported an error when boot an ARM64 guest with PAGE_SIZE=64k and
BALLOON is enabled:
hv_vmbus: registering driver hv_balloon
hv_vmbus: probe failed for device 1eccfd72-4b41-45ef-b73a-4a6e44c12924 (-22)
The cause of this is that the ringbuffer size for hv_balloon is not
adjusted with VMBUS_RING_SIZE(), which makes the size not large enough
for ringbuffers on guest with PAGE_SIZE=64k. Therefore use
VMBUS_RING_SIZE() to calculate the ringbuffer size. Note that the old
size (20 * 1024) counts a 4k header in the total size, while
VMBUS_RING_SIZE() expects the parameter as the payload size, so use
16 * 1024.
Cc: <stable@vger.kernel.org> # 5.15.x
Reported-by: Baihua Lu <baihua.lu@microsoft.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211101150026.736124-1-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The the rpmsg property name is changed to "mediatek," to sync with the
vendor name defined in vendor-prefixes.yaml.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20210924033935.2127-7-tinghan.shen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
