Silicon Labs is now part of Skyworks Inc. so update the URLs to the
datasheet and application note.
Signed-off-by: Jens Renner <renner@efe-gmbh.de>
Link: https://lore.kernel.org/r/20210913074823.115212-1-renner@efe-gmbh.de
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
owl-factor.c hasn't use any macro or function declared in linux/slab.h.
Thus, these files can be removed from owl-factor.c safely without
affecting the compilation of the ./drivers/clk module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Link: https://lore.kernel.org/r/20210929065824.23691-1-liumh1@shanghaitech.edu.cn
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Two fixes in one:
- In the "impose hardware constraints" block, the "logical" divider
value (aka. not translated to the hardware) was clamped to fit in the
register area, but this totally ignored the fact that the divider
value can itself have a fixed divider.
- The code that made sure that the divider value returned by the
function was a multiple of its own fixed divider could result in a
wrong value being calculated, because it was rounded down instead of
rounded up.
Fixes: 4afe2d1a6e ("clk: ingenic: Allow divider value to be divided")
Co-developed-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When calling fsync_bdev(), zram driver guarantees that the bdev won't be
opened by anyone, then there can't be one active fs/superblock over the
zram bdev, so replace fsync_bdev with sync_blockdev.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20211025025426.2815424-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After resetting device in zram_remove(), disksize_store still may come and
allocate resources again before deleting gendisk, fix the race by resetting
zram after del_gendisk() returns. At that time, disksize_store can't come
any more.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20211025025426.2815424-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the zram module is being unloaded, no one should be using the
zram disks. However even while being unloaded the zram module's
sysfs attributes might be poked at to re-configure zram devices.
This is expected, and kernfs ensures that these operations complete
before device_del() completes.
But reset_store() may set ->claim which will fail zram_remove(), when
this happens, zram_reset_device() is bypassed, and zram->comp can't
be destroyed, so the warning of 'Error: Removing state 63 which has
instances left.' is triggered during unloading module, together with
memory leak and sort of thing.
Fixes the issue by not failing zram_remove() if ->claim is set, and
we actually need to do nothing in case that zram_reset() is running
since del_gendisk() will wait until zram_reset() is done.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20211025025426.2815424-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit fcf3d633d8 ("nbd: check sock index in nbd_read_stat()") just
add error message when socket index doesn't match. Since the request
and reply must be transmitted over the same socket, it's ok to error
out in such situation.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20211101092538.1155842-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the assignment, only exit path with label 'err' uses ret as
return value. However,before exiting through this path with label 'err',
ret is assigned with the return value of io_wq_max_workers(). Hence, the
initial assignment is redundant and can be removed.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Link: https://lore.kernel.org/r/20211102190521.28291-1-nghialm78@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This minor fix-up keeps GCC from complaining that "last' may be used
uninitialized", which breaks some build workflows that have been running
with all warnings treated as errors.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
As now graphics and media can have different steppings this patch is
renaming all _GT_STEP macros to _GRAPHICS_STEP.
Future platforms will properly choose between _MEDIA_STEP and
_GRAPHICS_STEP for each new workaround.
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-3-jose.souza@intel.com
Graphics and media IPs can have different stepping so a new field is
needed in intel_step_info.
The next patch will take care of rename gt_step to graphics_step.
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-2-jose.souza@intel.com
Adding a structure to standardize access to IP versioning as future
platforms will have this information populated at runtime.
The constant platform display version is not using this new struct but
the runtime variant will definitely use it.
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-1-jose.souza@intel.com
* Bug fixes and cleanups for kernel memory allocation usage, this time
without touching the mm code.
* Refactor the log recovery mechanism that preserves held resources
across a transaction roll so that it uses the exact same mechanism
that we use for that during regular runtime.
* Fix bugs and tighten checking around btree heights.
* Remove more old typedefs.
* Fix perag reference leaks when racing with growfs.
* Remove unused fields from xfs_btree_cur.
* Allocate various scrub structures on the heap to reduce stack usage.
* Pack xfs_btree_cur fields and rearrange to support arbitrary heights.
* Compute maximum possible heights for each btree height, and use that
to set up slab caches for each btree type.
* Finally remove kmem_zone_t, since these have always been struct
kmem_cache on Linux.
* Compact the structures used to coordinate work intent items.
* Set up slab caches for each work intent item type.
* Rename the "bmap_add_free" function to "free_extent_later", which
more accurately describes what it does.
* Fix corruption warning on unmount when a CoW preallocation covers a
data fork delalloc reservation but then the CoW fails.
* Add some more minor code improvements.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmF9d8IACgkQ+H93GTRK
tOug0w/+N/RqL2Yo3R67ByI6+Los7JCWixTZJJjDzwvnYAAmT/z04JWD0fSO0iQX
2UlxsONrWxLswX4qYdzJNhfDfxMI+aso5D9IHNIchOa95JLq4FSnJ7Elw+AaYJW3
EvSm3LLFwwZwreNk6EXCOfRnPK2EXTFkq4iCPMu8bW+wXlxth2fo2AiZzNzl4y6N
tBc8lYhtMiu7n223wM+qqAnh6onB4iSu9HtyMcuIAL3FvQU4FYlHy+IurtwnJX+p
fHhPUG6YaIxvRFDMMEfEd2a8CSRtBoOmAgDNbKKq+l/2NrXRW3ysrohRAKtUrCfC
15RFKvoZu9a2JxOfXxdr78zFGykuMFesEOaK86c58C35Rp5fTZTmB0kntLrUvIsK
6gdSslUM0Dsw8v6l6tbIHBMjg7mn4fatK8IM74U7omL+mBHnV2HEBNtaOqG4Fjd+
YSG3g/F7AkAYDUbvYKLiedZC+spbt28thg25ED6ZWGA1qJ1I5OZ8G9O80v3i0Jcf
8G16nXeBtxumvz/Ga01S/c7jdCrXm46+qzubf3nET2di+5o+THDorSeg3nySfOz5
L7uPnm3CV5jYFQN/kVg2an4mO5uLipHzbZSYN1l44lTPt8IUDDEu4DIbpjKgdFGT
jZE0uRSscsLsGmrui1Bg65KO2cG1rz18Gp+RVeJoNZn7WRW+tjM=
=zRzv
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.16-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"This cycle we've worked on fixing bugs and improving XFS' memory
footprint.
The most notable fixes include: fixing a corruption warning (and free
space accounting skew) if copy on write fails; fixing slab cache
misuse if SLOB is enabled, which apparently was broken for years
without anybody noticing; and fixing a potential race with online
shrinkfs.
Otherwise, the bulk of the changes here involve setting up separate
slab caches for frequently used items such as btree cursors and log
intent items, and compacting the structures to reduce memory usage of
those items substantially. This also sets us up to support larger
btrees in future kernels. We also switch parts of online fsck to
allocate scrub context information from the heap instead of using
stack space.
Summary:
- Bug fixes and cleanups for kernel memory allocation usage, this
time without touching the mm code.
- Refactor the log recovery mechanism that preserves held resources
across a transaction roll so that it uses the exact same mechanism
that we use for that during regular runtime.
- Fix bugs and tighten checking around btree heights.
- Remove more old typedefs.
- Fix perag reference leaks when racing with growfs.
- Remove unused fields from xfs_btree_cur.
- Allocate various scrub structures on the heap to reduce stack
usage.
- Pack xfs_btree_cur fields and rearrange to support arbitrary
heights.
- Compute maximum possible heights for each btree height, and use
that to set up slab caches for each btree type.
- Finally remove kmem_zone_t, since these have always been struct
kmem_cache on Linux.
- Compact the structures used to coordinate work intent items.
- Set up slab caches for each work intent item type.
- Rename the "bmap_add_free" function to "free_extent_later", which
more accurately describes what it does.
- Fix corruption warning on unmount when a CoW preallocation covers a
data fork delalloc reservation but then the CoW fails.
- Add some more minor code improvements"
* tag 'xfs-5.16-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (45 commits)
xfs: use swap() to make code cleaner
xfs: Remove duplicated include in xfs_super
xfs: punch out data fork delalloc blocks on COW writeback failure
xfs: remove unused parameter from refcount code
xfs: reduce the size of struct xfs_extent_free_item
xfs: rename xfs_bmap_add_free to xfs_free_extent_later
xfs: create slab caches for frequently-used deferred items
xfs: compact deferred intent item structures
xfs: rename _zone variables to _cache
xfs: remove kmem_zone typedef
xfs: use separate btree cursor cache for each btree type
xfs: compute absolute maximum nlevels for each btree type
xfs: kill XFS_BTREE_MAXLEVELS
xfs: compute the maximum height of the rmap btree when reflink enabled
xfs: clean up xfs_btree_{calc_size,compute_maxlevels}
xfs: compute maximum AG btree height for critical reservation calculation
xfs: rename m_ag_maxlevels to m_allocbt_maxlevels
xfs: dynamically allocate cursors based on maxlevels
xfs: encode the max btree height in the cursor
xfs: refactor btree cursor allocation function
...
Use the preferred generic header file linux/io.h that already includes the
corresponding asm/io.h file.
Link: https://lore.kernel.org/r/20211013003145.1107148-2-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
-----BEGIN PGP SIGNATURE-----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=ax6b
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20211102' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
- Split the readpage handler for symlinks from the one for files. The
symlink readpage isn't given a file pointer, so the handling has to
be special-cased.
This has been posted as part of a patchset to foliate netfs, afs,
etc.[1] but I've moved it to this one as it's not actually doing
foliation but is more of a pre-cleanup.
- Fix file creation to set the mtime from the client's clock to keep
make happy if the server's clock isn't quite in sync.[2]
Link: https://lore.kernel.org/r/163005742570.2472992.7800423440314043178.stgit@warthog.procyon.org.uk/ [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-October/004395.html [2]
* tag 'afs-next-20211102' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Set mtime from the client for yfs create operations
afs: Sort out symlink reading
This patch fixes the following crash by receiving a invalid message:
[ 160.672220] ==================================================================
[ 160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[ 160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319
[ 160.681447]
[ 160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[ 160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014
[ 160.685574] Workqueue: dlm_recv process_recv_sockets
[ 160.686721] Call Trace:
[ 160.687310] dump_stack_lvl+0x56/0x6f
[ 160.688169] ? dlm_user_add_ast+0xc3/0x370
[ 160.689116] kasan_report.cold.14+0x116/0x11b
[ 160.690138] ? dlm_user_add_ast+0xc3/0x370
[ 160.690832] dlm_user_add_ast+0xc3/0x370
[ 160.691502] _receive_unlock_reply+0x103/0x170
[ 160.692241] _receive_message+0x11df/0x1ec0
[ 160.692926] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.693700] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.694427] ? lock_acquire+0x175/0x400
[ 160.695058] ? do_purge.isra.51+0x200/0x200
[ 160.695744] ? lock_acquired+0x360/0x5d0
[ 160.696400] ? lock_contended+0x6a0/0x6a0
[ 160.697055] ? lock_release+0x21d/0x5e0
[ 160.697686] ? lock_is_held_type+0xe0/0x110
[ 160.698352] ? lock_is_held_type+0xe0/0x110
[ 160.699026] ? ___might_sleep+0x1cc/0x1e0
[ 160.699698] ? dlm_wait_requestqueue+0x94/0x140
[ 160.700451] ? dlm_process_requestqueue+0x240/0x240
[ 160.701249] ? down_write_killable+0x2b0/0x2b0
[ 160.701988] ? do_raw_spin_unlock+0xa2/0x130
[ 160.702690] dlm_receive_buffer+0x1a5/0x210
[ 160.703385] dlm_process_incoming_buffer+0x726/0x9f0
[ 160.704210] receive_from_sock+0x1c0/0x3b0
[ 160.704886] ? dlm_tcp_shutdown+0x30/0x30
[ 160.705561] ? lock_acquire+0x175/0x400
[ 160.706197] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.706941] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.707681] process_recv_sockets+0x32/0x40
[ 160.708366] process_one_work+0x55e/0xad0
[ 160.709045] ? pwq_dec_nr_in_flight+0x110/0x110
[ 160.709820] worker_thread+0x65/0x5e0
[ 160.710423] ? process_one_work+0xad0/0xad0
[ 160.711087] kthread+0x1ed/0x220
[ 160.711628] ? set_kthread_struct+0x80/0x80
[ 160.712314] ret_from_fork+0x22/0x30
The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.
It can be reproduced with two cluster nodes.
node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters
node 1:
dlm_tool join test
python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to put a lkb to the waiters state. It can
be useful to combine this feature with the "rawmsg" debugfs
functionality. It will bring the DLM lkb into a state that a message
will be parsed by the kernel.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to add an lkb during runtime. This is a
highly debugging feature only, wrong input can crash the kernel. It is a
early state feature as well. The goal is to provide a user interface for
manipulate dlm state and combine it with the rawmsg feature. It is
debugfs functionality, we don't care about UAPI breakage. Even it's
possible to add lkb's/rsb's which could never be exists in such wat by
using normal DLM operation. The user of this interface always need to
think before using this feature, not every crash which happens can really
occur during normal dlm operation.
Future there should be more functionality to add a more realistic lkb
which reflects normal DLM state inside the kernel. For now this is
enough.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to add a lkb with a specific id range.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a dlm functionality to send a raw dlm message to a
specific cluster node. This raw message can be build by user space and
send out by writing the message to "rawmsg" dlm debugfs file.
There is a in progress scapy dlm module which provides a easy build of
DLM messages in user space. For example:
DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0xe4f48a18, ...)
The goal is to provide an easy reproducable state to crash DLM or to
fuzz the DLM kernel stack if there are possible ways to crash it.
Note: that if the sequence number is zero and dlm version is not set to
3.1 the kernel will automatic will set a right sequence number, otherwise
DLM stack testing is not possible.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the dlm_lowcomms_new_msg() function pointer private data
from "struct mhandle *" to "void *" to provide different structures than
just "struct mhandle".
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ls_count busy wait to use atomic counter values
and wait_event() to wait until ls_count reach zero. It will slightly
reduce the number of holding lslist_lock. At remove lockspace we need to
retry the wait because it a lockspace get could interefere between
wait_event() and holding the lock which deletes the lockspace list entry.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the requestqueue busy waiting algorithm to use
atomic counter values and wait_event() to wait until the requestqueue is
empty. It will slightly reduce the number of holding ls_requestqueue_mutex
mutex.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds tracepoints for dlm socket receive and send
functionality. We can use it to track how much data was send or received
to or from a specific nodeid.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds initial support for dlm tracepoints. It will introduce
tracepoints to dlm main functionality dlm_lock()/dlm_unlock() and their
complete ast() callback or blocking bast() callback.
The lock/unlock functionality has a start and end tracepoint, this is
because there exists a race in case if would have a tracepoint at the
end position only the complete/blocking callbacks could occur before. To
work with eBPF tracing and using their lookup hash functionality there
could be problems that an entry was not inserted yet. However use the
start functionality for hash insert and check again in end functionality
if there was an dlm internal error so there is no ast callback. In further
it might also that locks with local masters will occur those callbacks
immediately so we must have such functionality.
I did not make everything accessible yet, although it seems eBPF can be
used to access a lot of internal datastructures if it's aware of the
struct definitions of the running kernel instance. We still can change
it, if you do eBPF experiments e.g. time measurements between lock and
callback functionality you can simple use the local lkb_id field as hash
value in combination with the lockspace id if you have multiple
lockspaces. Otherwise you can simple use trace-cmd for some functionality,
e.g. `trace-cmd record -e dlm` and `trace-cmd report` afterwards.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch makes dlm_callback_resume info printout less noisy by
accumulate all callback queues into one printout not in 25 times steps.
It seems this printout became lately quite noisy in relationship with
gfs2.
Before:
[241767.849302] dlm: bin: dlm_callback_resume 25
[241767.854846] dlm: bin: dlm_callback_resume 25
[241767.860373] dlm: bin: dlm_callback_resume 25
...
[241767.865920] dlm: bin: dlm_callback_resume 25
[241767.871352] dlm: bin: dlm_callback_resume 25
[241767.876733] dlm: bin: dlm_callback_resume 25
After the patch:
[ 385.485728] dlm: gfs2: dlm_callback_resume 175
if zero it will not be printed out.
Reported-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change to evaluate the dlm_recovery_stopped() in the
condition of the if branch instead fetch it before evaluating the
condition. As this is an atomic test-set operation it should be
evaluated in the condition itself.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change to use dlm_recovery_stopped() which is the dlm way
to check if the LSFL_RECOVER_STOP flag in ls_flags by using the helper.
It is an atomic operation but the check is still as before to fetch the
value if ls_recover_lock is held. There might be more further
investigations if the value can be changed afterwards and if it has any
side effects.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves version conversion to little endian from a runtime
variable to compile time constant.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Since commit 764ff4011424 ("fs: dlm: auto load sctp module") we try
load the sctp module before we try to create a sctp kernel socket. That
a socket creation fails now has more likely other reasons. This patch
removes the part of error to load the sctp module and instead printout
the error code.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch improves the debug output for midcomms layer by also printing
out the nodeid where users counter belongs to.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a typo from lockspace to lockspace.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes an obsolete define for some length for an temporary
buffer which is not being used anymore. The use of this define is not
necessary anymore since commit 4798cbbfbd ("fs: dlm: rework receive
handling").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
* Fix a locking order inversion between the inode and iopen glocks in
gfs2_inode_lookup.
* Implement proper queuing of glock holders for glocks that require
instantiation (like reading an inode or bitmap blocks from disk).
Before, multiple glock holders could race with each other and
half-initialized objects could be exposed; the GL_SKIP flag further
exacerbated this problem.
* Fix a rare deadlock between inode lookup / creation and remote delete
work.
* Fix a rare scheduling-while-atomic bug in dlm during glock hash table
walks.
* Various other minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmGBThoUHGFncnVlbmJh
QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTp4vg/9HQbZYtl1R7qWlzaEAOHaZzudcRIS
wnCGGxqdySdWogXhBCICwyH7nJneFG1XsYvNF8HmH10ALjZkjWM3MV0J9O00eCWk
VXKqcioRbWtyQiye3A3icT6qhVGd65LK+p6GqtH7pQXOYc1ein/Gi/IWHFN6wCTM
FXulFAo6i3Uep4lfz9+WPy8iGDVVLUWt0uhmY8O+W8edsDJdX7Kr89mQU/2dUsMp
BxImDvKcchd8SlWOHNJ2WrbfPVFLd3mgmouojxn7/0pspqtJA6tgOWpAmN0uKw+V
Qaqb9g0KjrAnH39w1wSzlN9XCItOvT3EGg1HEkl1kx5UDi4S/B9yF0wWbzfI2BUL
9T0dyAbmIcamcHua+rQatTfBQnEOScNfZQKd9MHE4etLhVyE2fHjmx2Ya4xcmiy/
/onUEcfjcQvzVY+69hD9cqKwwgTz5G2xyLzD7WdWJD10qU4z22arOSIedmC2c1Eq
62cbaxcHXrDkG8FYHb/ukNeZ8Fw54niWnBCXDBfRxpx/UbJDzvNxjF2BPNJEBWON
UFO8cbMVMojrsLkkWKTInecCLjhROwgWXUo8A1CmYQNlMUhObWts2jGoRlUYBUcH
8Ah+DADcz9H8VV2koURo6ZkJyJBztgJOZ+ysFZSdPQ2HQnijwWqi8Zn33UfTZH6d
BxxPK+wVfPNZSWQ=
=sAlR
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.15-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix a locking order inversion between the inode and iopen glocks in
gfs2_inode_lookup.
- Implement proper queuing of glock holders for glocks that require
instantiation (like reading an inode or bitmap blocks from disk).
Before, multiple glock holders could race with each other and
half-initialized objects could be exposed; the GL_SKIP flag further
exacerbated this problem.
- Fix a rare deadlock between inode lookup / creation and remote delete
work.
- Fix a rare scheduling-while-atomic bug in dlm during glock hash table
walks.
- Various other minor fixes and cleanups.
* tag 'gfs2-v5.15-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (21 commits)
gfs2: Fix unused value warning in do_gfs2_set_flags()
gfs2: check context in gfs2_glock_put
gfs2: Fix glock_hash_walk bugs
gfs2: Cancel remote delete work asynchronously
gfs2: set glock object after nq
gfs2: remove RDF_UPTODATE flag
gfs2: Eliminate GIF_INVALID flag
gfs2: fix GL_SKIP node_scope problems
gfs2: split glock instantiation off from do_promote
gfs2: further simplify do_promote
gfs2: re-factor function do_promote
gfs2: Remove 'first' trace_gfs2_promote argument
gfs2: change go_lock to go_instantiate
gfs2: dump glocks from gfs2_consist_OBJ_i
gfs2: dequeue iopen holder in gfs2_inode_lookup error
gfs2: Save ip from gfs2_glock_nq_init
gfs2: Allow append and immutable bits to coexist
gfs2: Switch some BUG_ON to GLOCK_BUG_ON for debug
gfs2: move GL_SKIP check from glops to do_promote
gfs2: Add GL_SKIP holder flag to dump_holder
...
Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock. In the most basic scenario, that buffer will not be
resident and it will be mapped to the same file. Accessing the buffer
will trigger a page fault, and gfs2 will deadlock trying to take the
same inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled.
-----BEGIN PGP SIGNATURE-----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=WeNd
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
Pull MD updates from Song:
"The only significant change here is a fix in back_log sysfs entry, by
Guoqing Jiang."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
raid5-ppl: use swap() to make code cleaner
md/bitmap: don't set max_write_behind if there is no write mostly device
Use the macro `swap()` defined in `include/linux/minmax.h` to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Song Liu <songliubraving@fb.com>
We shouldn't set it since write behind IO should only happen to write
mostly device.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <songliubraving@fb.com>
This patch adds the support of the AOSP Bluetooth Quality Report
(BQR) events.
Multiple vendors have supported the AOSP Bluetooth Quality Report.
When a Bluetooth controller supports the capability, it can enable
the aosp capability through hci_set_aosp_capable. Then hci_core will
set up the hdev->aosp_set_quality_report callback through aosp_do_open
if the controller responds to support the quality report capability.
Note that Intel also supports a distinct telemetry quality report
specification. Intel sets up the hdev->set_quality_report callback
in the btusb driver module.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds the struct of reading AOSP vendor capabilities.
New capabilities are added incrementally. Note that the
version_supported octets will be used to determine whether a
capability has been defined for the version.
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In io-wq.c:io_wq_max_workers(), new_count[] was changed right after each
node's value was set. This caused the following node getting the setting
of the previous one.
Returned values are copied from node 0.
Fixes: 2e480058dd ("io-wq: provide a way to limit max number of workers")
Signed-off-by: Beld Zhang <beldzhang@gmail.com>
[axboe: minor fixups]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge Energy Model and power capping updates for 5.16-rc1:
- Add support for inefficient operating performance points to the
Energy Model and modify cpufreq to use them properly (Vincent
Donnefort).
- Rearrange the DTPM framework code to simplify it and make it easier
to follow (Daniel Lezcano).
- Fix power intialization in DTPM (Daniel Lezcano).
- Add CPU load consideration when estimating the instaneous power
consumption in DTPM (Daniel Lezcano).
* pm-em:
cpufreq: mediatek-hw: Fix cpufreq_table_find_index_dl() call
PM: EM: Mark inefficiencies in CPUFreq
cpufreq: Use CPUFREQ_RELATION_E in DVFS governors
cpufreq: Introducing CPUFREQ_RELATION_E
cpufreq: Add an interface to mark inefficient frequencies
cpufreq: Make policy min/max hard requirements
PM: EM: Allow skipping inefficient states
PM: EM: Extend em_perf_domain with a flag field
PM: EM: Mark inefficient states
PM: EM: Fix inefficient states detection
* powercap:
powercap/drivers/dtpm: Fix power limit initialization
powercap/drivers/dtpm: Scale the power with the load
powercap/drivers/dtpm: Use container_of instead of a private data field
powercap/drivers/dtpm: Simplify the dtpm table
powercap/drivers/dtpm: Encapsulate even more the code
* clk-composite-determine-fix:
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: composite: Also consider .determine_rate for rate + mux composites
* clk-allwinner:
clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource()
dt-bindings: clocks: Fix typo in the H6 compatible
clk: sunxi-ng: Use a separate lock for each CCU instance
clk: sunxi-ng: Prevent unbinding CCUs via sysfs
clk: sunxi-ng: Unregister clocks/resets when unbinding
clk: sunxi-ng: Add machine dependency to A83T CCU
clk: sunxi-ng: mux: Remove unused 'reg' field
* clk-amlogic:
clk: meson: meson8b: Make the video clock trees mutable
clk: meson: meson8b: Initialize the HDMI PLL registers
clk: meson: meson8b: Add the HDMI PLL M/N parameters
clk: meson: meson8b: Add the vid_pll_lvds_en gate clock
clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
clk: meson: meson8b: Export the video clocks
* clk-samsung:
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
clk: samsung: add support for CPU clocks
clk: samsung: Introduce Exynos850 clock driver
dt-bindings: clock: Document Exynos850 CMU bindings
dt-bindings: clock: Add bindings definitions for Exynos850 CMU
clk: samsung: clk-pll: Implement pll0831x PLL type
clk: samsung: clk-pll: Implement pll0822x PLL type
clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
* clk-imx: (21 commits)
clk: imx: Make CLK_IMX8ULP select MXC_CLK
clk: imx: imx6ul: Fix csi clk gate register
clk: imx: imx6ul: Move csi_sel mux to correct base register
clk: imx: Fix the build break when clk-imx8ulp build as module
clk: imx: Add the pcc reset controller support on imx8ulp
clk: imx: Add clock driver for imx8ulp
clk: imx: Update the pfdv2 for 8ulp specific support
clk: imx: disable the pfd when set pfdv2 clock rate
clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
clk: imx: disable i.mx7ulp composite clock during initialization
clk: imx: Update the compsite driver to support imx8ulp
clk: imx: Update the pllv4 to support imx8ulp
dt-bindings: clock: Add imx8ulp clock support
clk: imx: Rework imx_clk_hw_pll14xx wrapper
clk: imx: Rework all imx_clk_hw_composite wrappers
clk: imx: Rework all clk_hw_register_divider wrappers
clk: imx: Rework all clk_hw_register_mux wrappers
clk: imx: Rework all clk_hw_register_gate2 wrappers
clk: imx: Rework all clk_hw_register_gate wrappers
clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones
...
* clk-ux500:
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
* clk-debugfs:
clk: use clk_core_get_rate_recalc() in clk_rate_get()
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to use
cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while
changing the frequency via DVFS
- Power management refinement with the use of save_context()/restore_context()
on each clock driver to specify their use in case of Backup mode only
* clk-leak:
clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling paths
* clk-rockchip:
clk: rockchip: use module_platform_driver_probe
clk: rockchip: rk3399: expose PCLK_COREDBG_{B,L}
clk: rockchip: rk3399: make CPU clocks critical
* clk-renesas:
clk: renesas: r8a779[56]x: Add MLP clocks
clk: renesas: r9a07g044: Add SDHI clock and reset entries
clk: renesas: rzg2l: Add SDHI clk mux support
clk: renesas: r8a779a0: Add RPC support
clk: renesas: cpg-lib: Move RPC clock registration to the library
clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller
clk: renesas: r8a779a0: Add Z0 and Z1 clock support
clk: renesas: r9a07g044: Add GbEthernet clock/reset
clk: renesas: rzg2l: Add support to handle coupled clocks
clk: renesas: r9a07g044: Add ethernet clock sources
clk: renesas: rzg2l: Add support to handle MUX clocks
clk: renesas: r8a779a0: Add TPU clock
clk: renesas: rzg2l: Fix clk status function
clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
* clk-at91:
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: at91: check pmc node status before registering syscore ops