Reorganize the HDMI 4:2:0 handling a bit by introducing
intel_hdmi_output_format(). We already have the DP counterpart
and I want to unify the 4:2:0 handling across both a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename intel_hdmi_port_clock() into intel_hdmi_tmds_clock(), and
move the 4:2:0 TMDS clock halving into intel_hdmi_tmds_clock() so
the callers don't have to worry about such details.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Introduce a small helper which given the crtc state tells us
whether we're output YCbCr 4:2:0 or not. For native HDMI this
is rather simple as we just look at the output_format. But I
think the helper is beneficial since with DP HDMI DFPs we're
going to need a more complex variant, and I want to unify the
DP and HDMI sides of that as much as possible.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_hdmi_bpc_possible() is used by the DP code as well where
the native HDMI source limits do not apply. So let's split this
into a pair of functions: one for the source vs. one for the sink.
This is basically reverting some of commit 41828125ac ("drm/i915:
Move platform checks into intel_hdmi_bpc_possible()") slightly,
but in a nicer form. I guess I forgot at the time that the DP side
uses this too.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This is needed since an empty channel label is used to indicate an
unused channel, and there can be more that one of those.
Fixes the following problem reported by dtbs_check:
envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements
arch/arm/boot/dts/at91-tse850-3.dt.yaml
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Needed for in-kernel use of the child channels of the mux.
Fixes problems like this, reported by dtbs_check:
adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml
Suggested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Turn 'adc128_probe()' into a full resource managed function to simplify the
code.
This way, the .remove function can be removed.
Doing so, the only 'spi_get_drvdata()' call is removed and the
corresponding 'spi_set_drvdata()' can be removed as well.
Suggested-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/4fa7fcc59c40e27af0569138d656c698a53dbd44.1630002770.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If the devicetree specifies that the hardware requires a settle time,
pass this time on to the mux APIs.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20211007134641.13417-4-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hardware may require some time for the muxed analog signals to settle
after the muxing is changed. Allow this time to be specified in the
devicetree.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20211007134641.13417-3-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hardware may require some time for the muxed analog signals to settle
after the muxing is changed. Allow users of the mux subsystem to
specify this delay with the new mux_control_select_delay() function (and
the _try equivalent).
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20211007134641.13417-2-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently, Linux probes for X86_BUG_NULL_SEL unconditionally which
makes it unsafe to migrate in a virtualised environment as the
properties across the migration pool might differ.
To be specific, the case which goes wrong is:
1. Zen1 (or earlier) and Zen2 (or later) in a migration pool
2. Linux boots on Zen2, probes and finds the absence of X86_BUG_NULL_SEL
3. Linux is then migrated to Zen1
Linux is now running on a X86_BUG_NULL_SEL-impacted CPU while believing
that the bug is fixed.
The only way to address the problem is to fully trust the "no longer
affected" CPUID bit when virtualised, because in the above case it would
be clear deliberately to indicate the fact "you might migrate to
somewhere which has this behaviour".
Zen3 adds the NullSelectorClearsBase CPUID bit to indicate that loading
a NULL segment selector zeroes the base and limit fields, as well as
just attributes. Zen2 also has this behaviour but doesn't have the NSCB
bit.
[ bp: Minor touchups. ]
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211021104744.24126-1-jane.malalane@citrix.com
Instead of open-coding the checks add functions for this, simplifying
the handling of CCS modifiers on future platforms.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-12-imre.deak@intel.com
Move the function to intel_fb.c and rename it adding the intel_fb_
prefix following the naming of exported functions.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-11-imre.deak@intel.com
Future platforms change the location of CCS AUX planes in CCS
framebuffers, so add intel_fb_is_ccs_aux_plane() to query for these
planes independently of the platform. This function can be used
everywhere instead of is_ccs_plane() (or is_ccs_plane() && !cc_plane()),
since all the callers are only interested in CCS AUX planes (and not CCS
color-clear planes).
Add the corresponding intel_fb_is_gen12_ccs_aux_plane(), which can be
used everywhere instead of is_gen12_ccs_plane(), based on the above
explanation.
This change also unexports the is_gen12_ccs_modifier(),
is_gen12_ccs_plane(), is_gen12_ccs_cc_plane() functions as they are only
used in intel_fb.c
v1-v2: Unchanged
v3: (Ville)
- Use ccs_aux instead of the ccs_ctrl term everywhere.
- Use color_plane instead of plane term for FB plane indicies.
v4: Fix version range check. (Jani)
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-10-imre.deak@intel.com
CCS CC planes are quite different from CCS AUX planes, even though we
regard the CC planes as a linear buffer having a 64 byte stride. Thus
it's clearer to check for either CCS plane types explicitly when we need
to handle them; add the required CCS CC planes check here, while the
next patch will change all is_ccs_plane()/is_gen12_ccs_plane() checks to
consider only the CCS AUX planes.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-9-imre.deak@intel.com
On future platforms the index of the color-clear plane will change from
the one used by the GEN12 RC CCS CC modifier, so add a way to retrieve
the index independently of the platform/modifier.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-8-imre.deak@intel.com
Move intel_format_info_is_yuv_semiplanar() to intel_fb.c . The number of
planes for YUV semiplanar formats using CCS modifiers will change on
future platforms. We can use the modifier descriptors to simplify
getting the plane numbers for all modifiers, prepare for that here.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-7-imre.deak@intel.com
Checking the modifiers that support interlacing makes the condition
simpler and avoids us having to add new modifiers to the list (presuming
all/most of the new modifiers won't support interlacing).
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-5-imre.deak@intel.com
Add a tiling atttribute to the modifier descriptor, which let's us
get the tiling without listing the modifiers twice.
v1-v2: Unchanged.
v3:
- Initialize .tiling to I915_TILING_NONE explicitly (Ville)
- Move from previous patch lookup_modifier() to here, where it's first
used.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-4-imre.deak@intel.com
Move the function retrieving the format override information for a given
format/modifier to intel_fb.c. We can store a pointer to the format list
in each modifier's descriptor instead of the corresponding switch/case
logic, avoiding the listing of the modifiers twice.
v1: Unchanged.
v2: Handle invalid modifiers in intel_fb_get_format_info() passed from
userspace. (CI/igt_kms_addfb_basic/addfb25-bad-modifier)
v3: Move lookup_modifier() to the next patch, where it's first used.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-3-imre.deak@intel.com
Add a table describing all the framebuffer modifiers used by i915 at one
place. This has the benefit of deduplicating the listing of supported
modifiers for each platform and checking the support of these modifiers
on a given plane. This also simplifies in a similar way getting some
attribute for a modifier, for instance checking if the modifier is a
CCS modifier type.
While at it drop the cursor plane filtering from skl_plane_has_rc_ccs(),
as the cursor plane is registered with DRM core elsewhere.
v1: Unchanged.
v2:
- Keep the plane caps calculation in the plane code and pass an enum
with these caps to intel_fb_get_modifiers(). (Ville)
- Get the modifiers calling intel_fb_get_modifiers() in i9xx_plane.c as
well.
v3:
- s/.id/.modifier/ (Ville)
- Keep modifier_desc vs. plane_cap filter conditions consistent. (Ville)
- Drop redundant cursor plane check from skl_plane_has_rc_ccs(). (Ville)
- Use from, until display version fields in modifier_desc instead of a mask. (Jani)
- Unexport struct intel_modifier_desc, separate its decl and init. (Jani)
- Remove enum pipe, plane_id forward decls from intel_fb.h, which are
not needed after v2.
v4:
- Reuse IS_DISPLAY_VER() instead of open-coding it. (Jani)
- Preserve the current modifier order exposed to user space. (Ville)
v5: Use }, { on one line to seperate the descriptor array elements. (Jani)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> (v3)
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-2-imre.deak@intel.com
Move the feature mask storage to the kernel and user config
structs. Default and maximum feature set are the same for now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.352041752@linutronix.de
Add support for the Surface Laptop Studio.
In contrast to previous Surface Laptop models, this one has its HID
devices attached to target ID 1 (instead of 2). It also has a couple
more of them, including a new notifier for when the pen is stashed /
taken out of its place, a "Sys Control" device, and two other
unidentified HID devices with unknown usages.
Battery and performance profile interfaces remain the same.
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211021130904.862610-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new Surface Laptop Studio uses GPEs for lid events as well. Add an
entry for that so that the lid can be used to wake the device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211021111053.564133-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
RTC based wakeup from s0i3 doesn't work properly on some Green Sardine
platforms. Because of this, a newer SMU for Green Sardine has the ability
to pass wakeup time as argument of the upper 16 bits of OS_HINT message.
With older firmware setting the timer value in OS_HINT will cause firmware
to reject the hint, so only run this path on:
1) Green Sardine
2) Minimum SMU FW
3) RTC alarm armed during s0i3 entry
Using this method has some limitations that the s0i3 wakeup will need to
be between 4 seconds and 18 hours, so check those boundary conditions as
well and abort the suspend if RTC is armed for too short or too long of a
duration.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211020162946.10537-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the "argument" for the "message" is listed as a boolean
value. This works well for the commands used currently, but an
additional upcoming command will pass more data in the message.
Expand it to be a full 32 bit value.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211020162946.10537-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This converts the kprobes testcases to use the kunit framework.
It adds a dependency on CONFIG_KUNIT, and the output will change
to TAP:
TAP version 14
1..1
# Subtest: kprobes_test
1..4
random: crng init done
ok 1 - test_kprobe
ok 2 - test_kprobes
ok 3 - test_kretprobe
ok 4 - test_kretprobes
ok 1 - kprobes_test
Note that the kprobes testcases are no longer run immediately after
kprobes initialization, but as a late initcall when kunit is
initialized. kprobes itself is initialized with an early initcall,
so the order is still correct.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
clang started warning about excessive stack usage in
hist_trigger_print_key()
kernel/trace/trace_events_hist.c:4723:13: error: stack frame size (1336) exceeds limit (1024) in function 'hist_trigger_print_key' [-Werror,-Wframe-larger-than]
The problem is that there are two 512-byte arrays on the stack if
hist_trigger_stacktrace_print() gets inlined. I don't think this has
changed in the past five years, but something probably changed the
inlining decisions made by the compiler, so the problem is now made
more obvious.
Rather than printing the symbol names into separate buffers, it
seems we can simply use the special %ps format string modifier
to print the pointers symbolically and get rid of both buffers.
Marking hist_trigger_stacktrace_print() would be a simpler
way of avoiding the warning, but that would not address the
excessive stack usage.
Link: https://lkml.kernel.org/r/20211019153337.294790-1-arnd@kernel.org
Fixes: 69a0200c2e ("tracing: Add hist trigger support for stacktraces as keys")
Link: https://lore.kernel.org/all/20211015095704.49a99859@gandalf.local.home/
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The current text of the explanation of the transition bit in the trace
recursion protection is not very clear. Improve the text, so that when all
the archs no longer have the issue of tracing between a start of a new
(interrupt) context and updating the preempt_count to reflect the new
context, that it may be removed.
Link: https://lore.kernel.org/all/20211018220203.064a42ed@gandalf.local.home/
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently to switch a set of "multi" direct trampolines from one
trampoline to another, a full shutdown of the current set needs to be
done, followed by an update to what trampoline the direct callers would
call, and then re-enabling the callers. This leaves a time when the
functions will not be calling anything, and events may be missed.
Instead, use a trick to allow all the functions with direct trampolines
attached will always call either the new or old trampoline while the
switch is happening. To do this, first attach a "dummy" callback via
ftrace to all the functions that the current direct trampoline is attached
to. This will cause the functions to call the "list func" instead of the
direct trampoline. The list function will call the direct trampoline
"helper" that will set the function it should call as it returns back to
the ftrace trampoline.
At this moment, the direct caller descriptor can safely update the direct
call trampoline. The list function will pick either the new or old
function (depending on the memory coherency model of the architecture).
Now removing the dummy function from each of the locations of the direct
trampoline caller, will put back the direct call, but now to the new
trampoline.
A better visual is:
[ Changing direct call from my_direct_1 to my_direct_2 ]
<traced_func>:
call my_direct_1
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call ftrace_caller
<ftrace_caller>:
[..]
call ftrace_ops_list_func
ftrace_ops_list_func()
{
ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
}
call rax (to either my_direct_1 or my_direct_2
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call my_direct_2
Link: https://lore.kernel.org/all/20211014162819.5c85618b@gandalf.local.home/
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding simple module that uses multi direct interface:
register_ftrace_direct_multi
unregister_ftrace_direct_multi
The init function registers trampoline for 2 functions,
and exit function unregisters them.
Link: https://lkml.kernel.org/r/20211008091336.33616-9-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding interface to modify registered direct function
for ftrace_ops. Adding following function:
modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The function changes the currently registered direct
function for all attached functions.
Link: https://lkml.kernel.org/r/20211008091336.33616-8-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding interface to register multiple direct functions
within single call. Adding following functions:
register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The register_ftrace_direct_multi registers direct function (addr)
with all functions in ops filter. The ops filter can be updated
before with ftrace_set_filter_ip calls.
All requested functions must not have direct function currently
registered, otherwise register_ftrace_direct_multi will fail.
The unregister_ftrace_direct_multi unregisters ops related direct
functions.
Link: https://lkml.kernel.org/r/20211008091336.33616-7-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Factor out the code that adds (ip, addr) tuple to direct_functions
hash in new ftrace_add_rec_direct function. It will be used in
following patches.
Link: https://lkml.kernel.org/r/20211008091336.33616-6-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's a new test in trace_selftest_startup_function_graph() that
requires the use of ftrace args being supported as well does some tricks
with dynamic tracing. Although this code checks HAVE_DYNAMIC_FTRACE_WITH_ARGS
it fails to check DYNAMIC_FTRACE, and the kernel fails to build due to
that dependency.
Also only define the prototype of trace_direct_tramp() if it is used.
Link: https://lkml.kernel.org/r/20211021134357.7f48e173@gandalf.local.home
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
dtpm structure only (Daniel Lezcano)
- Fix the power intialization (Daniel Lezcano)
- Add the CPU load ponderation when estimating the instaneous power
consumption (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmFxfGcACgkQqDIjiipP
6E+TGgf/dWKtga4DrwY6GhffbQTCOuoTMThYFE+bUQBXoB5SRQ6xAdtpbYyQbGS/
jfErRk8EMQDHTnlvL/LQYPdgy9ckX79ShVEJN/9U53E7ENBxZvdvG8BaK30zl99D
FARtF+Q3ekhmu3R6LHEOMFzotk4tLhLakV5huf0bKaXjPvxV/xg2fRjwN8uE15Ze
uV3E0jny0zGy13TKcFa8cUs0yhv42q9u46SSjGNviG92kHGm3uWedvWIjXq+JXsN
4XKPkGQDQ1XMG4yWy92dDCVKBjy+D0pKp1aAT6WJkMIS+0bj8NqZVAy+0TvjYUPI
Bc9bKQXMwN7/LQlTCYLuFraaUHD/xw==
=BjBl
-----END PGP SIGNATURE-----
Merge tag 'dtpm-v5.16' of https://git.linaro.org/people/daniel.lezcano/linux
Pull Dynamic Thermal Power Management (DTPM) framework changes for v5.16
from Daniel Lezcano:
- Simplify and make the code more self-encapsulate by dealing with the
dtpm structure only (Daniel Lezcano)
- Fix power intialization (Daniel Lezcano)
- Add the CPU load consideration when estimating the instaneous power
consumption (Daniel Lezcano)
* tag 'dtpm-v5.16' of https://git.linaro.org/people/daniel.lezcano/linux:
powercap/drivers/dtpm: Fix power limit initialization
powercap/drivers/dtpm: Scale the power with the load
powercap/drivers/dtpm: Use container_of instead of a private data field
powercap/drivers/dtpm: Simplify the dtpm table
powercap/drivers/dtpm: Encapsulate even more the code
Add CRC support to DPU, which is currently not supported by
this driver. Only supports CRC for CRTC for now, but will extend support
to other blocks later on.
Changes in v2:
- Added kfree() calls for return paths in dpu_crtc_get_crc()
- Propogated error code for dpu_crtc_get_crc()
- Renamed skip_count
- Removed dpu_crtc_is_valid_crc_source()
- Removed wait for commit in dpu_crtc_set_crc_source()
- Moved crc_source from struct dpu_crtc to struct dpu_crtc_state
- Moved CRC register constants from dpu_hw_util.h to dpu_hw_lm.c
Validated with IGT kms_pipe_crc_basic, and kms_cursor_crc
Test: kms_pipe_crc_basic
Subtests Passed:
- bad-source
- read-crc-pipe-A
- read-crc-pipe-A-frame-sequence
- nonblocking-crc-pipe-A
- nonblocking-crc-pipe-A-frame-sequence
- disable-crc-after-crtc-pipe-A[1]
- compare-crc-sanitycheck-pipe-A[1]
Rest skipped
Test: kms_cursor_crc
Subtests Passed:
- pipe-A-cursor-size-change
- pipe-A-cursor-alpha-opaque
- pipe-A-cursor-alpha-transparent
Subtests Failed:
- pipe-A-cursor-dpms
- pipe-A-cursor-*-onscreen
- pipe-A-cursor-*-offscreen
Rest skipped
Tested on Qualcomm RB3 (debian, sdm845), Qualcomm RB5 (debian, qrb5165)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
[1] Skipped on RB5 due to issue related to DPMS. Planning to upload a
fix for this in the future.
Link: https://lore.kernel.org/r/20211019224822.25940-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the new kernel and user space config storage to store and retrieve the
XSTATE buffer sizes. The default and the maximum size are the same for now,
but will change when support for dynamically enabled features is added.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.296830097@linutronix.de
The size calculations are partially unreadable gunk. Clean them up.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.241223689@linutronix.de
Another change to the API io-wq worker limitation API added in 5.15,
apply the limit to all prior users that already registered a tctx. It
may be confusing as it's now, in particular the change covers the
following 2 cases:
TASK1 | TASK2
_________________________________________________
ring = create() |
| limit_iowq_workers()
*not limited* |
TASK1 | TASK2
_________________________________________________
ring = create() |
| issue_requests()
limit_iowq_workers() |
| *not limited*
A note on locking, it's safe to traverse ->tctx_list as we hold
->uring_lock, but do that after dropping sqd->lock to avoid possible
problems. It's also safe to access tctx->io_wq there because tasks
kill it only after removing themselves from tctx_list, see
io_uring_cancel_generic() -> io_uring_clean_tctx()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d6e09ecc3545e4dc56e43c906ee3d71b7ae21bed.1634818641.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a struct to store information about the maximum supported and the
default feature set and buffer sizes for both user and kernel space.
This allows quick retrieval of this information for the upcoming support
for dynamically enabled features.
[ bp: Add vertical spacing between the struct members. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.126107370@linutronix.de
Switch to using bulk regulator API instead of hand coding loops.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211015001100.4193241-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Flush the destination page before invoking RECEIVE_UPDATE_DATA, as the
PSP encrypts the data with the guest's key when writing to guest memory.
If the target memory was not previously encrypted, the cache may contain
dirty, unecrypted data that will persist on non-coherent systems.
Fixes: 15fb7de1a7 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Masahiro Kozuka <masa.koz@kozuka.jp>
[sean: converted bug report to changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210914210951.2994260-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>