Commit graph

1,089,026 commits

Author SHA1 Message Date
Brendan Grieve
3c414eb65c ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13

The GSP670 has 2 playback and 1 recording device that by default are
detected in an incompatible order for alsa. This may have been done to make
it compatible for the console by the manufacturer and only affects the
latest firmware which uses its own ID.

This quirk will resolve this by reordering the channels.

Signed-off-by: Brendan Grieve <brendan@grieve.com.au>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-15 09:27:41 +02:00
Niklas Söderlund
c3131bd558 thermal: rcar_gen3_thermal: Read calibration from hardware
In production hardware the calibration values used to convert register
values to temperatures can be read from hardware. While pre-production
hardware still depends on pseudo values hard-coded in the driver.

Add support for reading out calibration values from hardware if it's
fused. The presence of fused calibration is indicated in the THSCP
register.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211014103816.1939782-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15 09:15:52 +02:00
Niklas Söderlund
b8aaf1415a thermal: rcar_gen3_thermal: Store thcode and ptat in priv data
Prepare for reading the THCODE and PTAT values from hardware fuses by
storing the values used during calculations in the drivers private
data structures.

As the values are now stored directly in the private data structures
there is no need to keep track of the TSC channel id as its only usage
was to lookup the THCODE row, drop it.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211014103816.1939782-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15 09:15:52 +02:00
Bjorn Andersson
f6c83676c6 thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
The variant of the ADC Thermal Monitor block found in e.g. PM8998 is
"HC", add support for this variant to the ADC TM5 driver in order to
support using VADC channels as thermal_zones on SDM845 et al.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211005032531.2251928-3-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15 09:13:55 +02:00
Bjorn Andersson
db03874b85 dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings
The HC generation of the ADC Thermal Monitor is quite similar to the 5th
generation, but differs in valid values for a few properties. Create a
new binding for the HC version of the hardware, rather than sprinkle
conditionals throughout the existing binding.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211005032531.2251928-2-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15 09:13:55 +02:00
Vegard Nossum
a14bc107ed drm/panel: olimex-lcd-olinuxino: select CRC32
Fix the following build/link error by adding a dependency on the CRC32
routines:

  ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe':
  panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le'

Fixes: 17fd7a9d32 ("drm/panel: Add support for Olimex LCD-OLinuXino panel")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:05:13 +10:00
Randy Dunlap
1a361b41c1 drm/r128: fix build for UML
Fix a build error on CONFIG_UML, which does not support (provide)
wbinvd(). UML can use the generic mb() instead.

../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’:
../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration]
  wbinvd();
  ^~~~~~

Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:05:10 +10:00
Marek Vasut
d1d94b0129 drm/nouveau/fifo: Reinstate the correct engine bit programming
Commit 64f7c698be ("drm/nouveau/fifo: add engine_id hook") replaced
fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of
fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned
from the later g84_fifo_engine_id() are incremented by 1 compared to
the previous g84_fifo_chan_engine() return values.

This is fine either way for most of the code, except this one line
where an engine bit programmed into the hardware is derived from the
return value. Decrement the return value accordingly, otherwise the
wrong engine bit is programmed into the hardware and that leads to
the following failure:
nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420

On the following hardware:
lspci -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2)
lspci -ns 01:00.0
01:00.0 0300: 10de:0a3c (rev a2)

Fixes: 64f7c698be ("drm/nouveau/fifo: add engine_id hook")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 5.12+
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:04:58 +10:00
Dexuan Cui
b253c3026c drm/hyperv: Fix double mouse pointers
Hyper-V supports a hardware cursor feature. It is not used by Linux VM,
but the Hyper-V host still draws a point as an extra mouse pointer,
which is unwanted, especially when Xorg is running.

The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer.
When the hyperv_drm driver was developed, the function synthvid_send_ptr()
was not copied from the hyperv_fb driver. Fix the issue by adding the
function into hyperv_drm.

Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:04:44 +10:00
Thomas Zimmermann
b693e42921 drm/fbdev: Clamp fbdev surface size if too large
Clamp the fbdev surface size of the available maximumi height to avoid
failing to init console emulation. An example error is shown below.

  bad framebuffer height 2304, should be >= 768 && <= 768
  [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
  simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22)

This is especially a problem with drivers that have very small screen
sizes and cannot over-allocate at all.

v2:
	* reduce warning level (Ville)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Amanoel Dawod <kernel@amanoeldawod.com>
Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com>
Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:04:05 +10:00
Douglas Anderson
97794170b6 drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read
In commit e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.

Let's fix this by adding a bounds check.

This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`.

Fixes: e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid corruption test")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid
Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-15 15:03:57 +10:00
Dave Airlie
6011106d12 Mediatek DRM Fixes for Linux 5.15
1. Revert series "CMDQ refinement of Mediatek DRM driver"
 -----BEGIN PGP SIGNATURE-----
 
 iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAmFnbjIYHGNodW5rdWFu
 Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4kAFMP/jfJmaJycW9vy8ZdVosU57fd
 uJu7Z/x0uJWBnGK93BGcC8OiHVR/3Bf35JVXECYbotZ2K6QXTj6GyT6K4fAU9V1e
 GA/9Jyq2fuYiI1uKErMUBsAJR1erZN+obFOvMD/QTK6nNJcoUiWbHHSwjrP+irY1
 GidcAufvId2aFKUljTfVYEVGuGlR/DvN7XRl5ejp9pe0SyVno144NJOU2hKxV+WV
 cRi/2zbZQrpDdk/8xjHhLXUah54dk/lUAi8Sj3EGj3i/sp8UHRaCdzUHUI6+FUWj
 IkJiJqadvyF2kAOjX3W9p+AoxpkWT8na43+a+y7BUixwW88rkpbZJbzZPohr2Zp8
 6dr2gXvZcRgyhUcjzS0A0HxbDw86zIXEyjC9HN86jM/ILqutVHTCipHPHAUIbOAp
 H/hTnsrDL+5E7xDrvcxhM3V9dpFNoewHvyemt1egdO9f/MjtVcx+24be3IdDb4Ur
 syr5WQAh6lB1HWd7i7dbz6v5ZoWiycVJoy0ylSiqJRa0hWT6elvkwwkf7ESP4IyE
 K9KEwEg7gVqQjisTUUdq0PYRsHIBa6Bx6HbuA3Tm/gIyQVLwMm9k/gGBVvB+9o85
 azdHP1hyNotISZ7w2jOZ3Gzu804O8ZvV6UUKgBanJ+igwCJ1ChyBPaaq6k0cDa+Q
 PxeFHA1+9Aq3UIhPLvPf
 =A23A
 -----END PGP SIGNATURE-----

Merge tag 'mediatek-drm-fixes-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes for Linux 5.15

1. Revert series "CMDQ refinement of Mediatek DRM driver"

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013235044.5488-1-chunkuang.hu@kernel.org
2021-10-15 15:02:57 +10:00
Andi Shyti
82a149a62b drm/i915/gt: move remaining debugfs interfaces into gt
The following interfaces:

  i915_wedged
  i915_forcewake_user

are dependent on gt values. Put them inside gt/ and drop the
"i915_" prefix name. This would be the new structure:

  dri/0/gt
  |
  +-- forcewake_user
  |
  \-- reset

For backwards compatibility with existing igt (and the slight
semantic difference between operating on the i915 abi entry
points and the deep gt info):

  dri/0
  |
  +-- i915_wedged
  |
  \-- i915_forcewake_user

remain at the top level.

Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012221738.16029-1-andi@etezian.org
2021-10-14 21:47:49 -07:00
Eddie James
908dbf0242 hwmon: (occ) Remove sequence numbering and checksum calculation
Checksumming of the request and sequence numbering is now done in the
OCC interface driver in order to keep unique sequence numbers. So
remove those in the hwmon driver. Also, add the command length to the
send_cmd function pointer, since the checksum must be placed in the
last two bytes of the command. The submit interface must receive the
exact size of the command - previously it could be rounded to the
nearest 8 bytes with no consequence.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210721190231.117185-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 15:09:26 +10:30
Eddie James
62f79f3d0e fsi: occ: Force sequence numbering per OCC
Set and increment the sequence number during the submit operation.
This prevents sequence number conflicts between different users of
the interface. A sequence number conflict may result in a user
getting an OCC response meant for a different command. Since the
sequence number is now modified, the checksum must be calculated and
set before submitting the command.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210721190231.117185-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 15:09:25 +10:30
Joel Stanley
52a490e0ef ARM: configs: aspeed: Remove unused USB gadget devices
The HID and mass storage gadget devices are used for the OpenBMC Web
UI's remote keyboard/mouse feature. The others are not required, so
disable them.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 15:02:32 +10:30
Joel Stanley
6c78800461 ARM: config: aspeed: Enable Network Block Device
NBD is used for remote media support in the OpenBMC Web UI.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 15:02:32 +10:30
Joel Stanley
59b8bfc894 ARM: configs: aspeed: Enable pstore and lockup detectors
These are enabled by OpenBMC platforms.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 15:02:32 +10:30
Joel Stanley
7af36da5fe ARM: configs: aspeed: Enable commonly used drivers
These devices are used by BMC platforms. Enable them so mainline
defconfigs can be used to test.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 15:02:19 +10:30
Joel Stanley
c688b4ad0c ARM: configs: aspeed: Disable IPV6 SIT device
No one is using this device on OpenBMC systems, and there is no code to
manage it in phosphor-networkd (the default OpenBMC userspace) as of
March 2021:

> [...] if you don't add IPv6 addresses to the sit interface
> it doesn't do anything. The defacto way to do that on an interface in
> OpenBMC is to have it managed by phosphor-networkd. On top of this, to
> support sit you would need a way to configure the local / remote IPv4
> addresses used to back it.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-15 14:41:12 +10:30
Li Yang
05e63b48b2 ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead.  This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:58 +08:00
Li Yang
1ee1500ef7 ARM: dts: ls1021a: move thermal-zones node out of soc/
This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
        From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:55 +08:00
Li Yang
08dc4d0c95 ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node
Property "postion" is not documented in the mma8452 binding.  Remove it
to resolve the error in "make dtbs_check"

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:52 +08:00
Li Yang
6aae6c4969 ARM: dts: ls1021a-qds: change fpga to simple-mfd device
The FPGA is not really a bus but more like an MFD device.  Change the
compatible string from "simple-bus" to "simple-mfd".  This also fix a
node name issue with simple-bus schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:49 +08:00
Li Yang
8bcf67b8d8 ARM: dts: ls1021a: add #power-domain-cells for power-controller node
Add the #power-domain-cells for power-controller node as required by the
schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:46 +08:00
Li Yang
39a1d8d2fb ARM: dts: ls1021a: add #dma-cells to qdma node
Add the #dma-cells to align with the dma schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:44 +08:00
Li Yang
e11f309660 ARM: dts: ls1021a: fix memory node for schema check
Fix the following error from "make dtbs_check"

memory: False schema does not allow ...

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:41 +08:00
Li Yang
8611083250 ARM: dts: ls1021a: remove regulators simple-bus
There is no regulator bus in hardware.  So move the regulator nodes out
and remove the regulators simple-bus.  This also make the dts align with
the simple-bus schema.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:39 +08:00
Li Yang
61761d3eeb ARM: dts: ls1021a: disable ifc node by default
Disable the bus in the SoC dtsi file to be enabled only in board dts
files. Also breakup long values in the ifc node to fix dtbs_check.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:36 +08:00
Li Yang
d41488bc0b ARM: dts: ls1021a: breakup long values in thermal node
Breakup long values to pass the schema check.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:33 +08:00
Li Yang
44c4072033 ARM: dts: ls1021a: fix board compatible to follow binding schema
Align the compatible strings with the board binding defined in schema
file.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:31 +08:00
Li Yang
74c7b45937 ARM: dts: ls1021a: update pcie nodes for dt-schema check
Break up long values to pass dt-schema checks.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:29 +08:00
Li Yang
7cd2f9a59f ARM: dts: ls1021a-qds: Add node for QSPI flash
Add the missing node for qspi flash.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:26 +08:00
Li Yang
784bdc6f26 ARM: dts: ls1021a: change to use SPDX identifiers
Replace the license text with SPDX identifiers.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:24 +08:00
Li Yang
ca8a261617 ARM: dts: ls1021a: change dma channels order to match schema
Although the ordering of DMA channels was not relevant in the txt binding,
it is defined as ordered in the converted yaml schema.  Update the dts
to match the order.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:21 +08:00
Li Yang
113dc42b03 ARM: dts: ls1021a: remove clock-names property for i2c nodes
The property is optional and not used in matching the clock in driver.
Remove it to avoid dtbs_check issues.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:16:06 +08:00
Li Yang
83ad8d1011 dt-bindings: arm: fsl: add ls1021a-tsn board
Add the missing board in the binding docuemnt.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:13:07 +08:00
Dan Carpenter
72949f7656 soc: imx: imx8m-blk-ctrl: off by one in imx8m_blk_ctrl_xlate()
The > comparison should be >= to prevent reading one element beyond the
end of the array.  The onecell_data->domains[] array is allocated in
imx8m_blk_ctrl_probe() and it has "onecell_data->num_domains" elements.

Fixes: 5b340e7813d4 ("soc: imx: add i.MX8M blk-ctrl driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:10:05 +08:00
Krzysztof Kozlowski
c49d461648 ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
Neither the bindings nor the device driver use/document
"vin-voltage-override" and "t5t-rmb-extra-byte-quirk" properties.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 11:04:42 +08:00
Jakub Kicinski
40088915f5 Merge branch 'octeontx2-af-miscellaneous-changes-for-cpt'
Srujana Challa says:

====================
octeontx2-af: Miscellaneous changes for CPT

This patchset consists of miscellaneous changes for CPT.
First patch enables the CPT HW interrupts, second patch
adds support for CPT LF teardown in non FLR path and
final patch does CPT CTX flush in FLR handler.

v2:
- Fixed a warning reported by kernel test robot.
====================

Link: https://lore.kernel.org/r/20211013055621.1812301-1-schalla@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 20:01:09 -07:00
Srujana Challa
149f3b73cb octeontx2-af: Add support to flush full CPT CTX cache
Adds support to flush or invalidate CPT CTX entries as part of FLR
and also provides a mailbox to flush CPT CTX entries in case of
graceful exit.
This patch also adds support for AF -> CPT PF uplink mailbox messages
and adds a new mbox message to submit a CPT instruction from AF.

Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 20:01:06 -07:00
Nithin Dabilpuram
7054d39ccf octeontx2-af: Perform cpt lf teardown in non FLR path
Perform CPT LF teardown in non FLR path as well via cpt_lf_free()
Currently CPT LF teardown and reset sequence is only
done when FLR is handled with CPT LF still attached.

This patch also fixes cpt_lf_alloc() to set EXEC_LDWB in
CPT_AF_LFX_CTL2 when being completely overwritten as that is
the default value and is better for performance.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 20:01:06 -07:00
Srujana Challa
4826090719 octeontx2-af: Enable CPT HW interrupts
This patch enables and registers interrupt handler for CPT HW
interrupts.

Signed-off-by: Srujana Challa <schalla@marvell.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 20:01:06 -07:00
Alistair Francis
e99a1fa731 ARM: imx_v6_v7_defconfig: Enable HID I2C
Enable HID I2C in the imx defconfig as it is used for a HID compliant
wacom device on the reMarkable2 tablet.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 10:49:53 +08:00
Tim Harvey
7973009235 arm64: dts: imx8mm-venice-gw7901.dts: disable pgc_gpumix
Since commit b21269b12e48 ("arm64: dts: imx8mm: add GPC node") the
GW7901 will hang during kernel init because it does not power the unused
GPU voltage rails on the IMX8MM. Disable pgc_gpumix to work around this.

We also disable the GPU devices that depend on the gpumix power domain
and pgc_gpu to avoid them staying in a probe deferred state forever.

Additionally as the MIPI voltage rail is also not connected on this
board we disable pgc_mipi and disp_blk_ctrl.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15 10:42:53 +08:00
Randy Dunlap
a3d708925f net: tulip: winbond-840: fix build for UML
On i386, when builtin (not a loadable module), the winbond-840 driver
inspects boot_cpu_data to see what CPU family it is running on, and
then acts on that data. The "family" struct member (x86) does not exist
when running on UML, so prevent that test and do the default action.

Prevents this build error on UML + i386:

../drivers/net/ethernet/dec/tulip/winbond-840.c: In function ‘init_registers’:
../drivers/net/ethernet/dec/tulip/winbond-840.c:882:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’
  if (boot_cpu_data.x86 <= 4) {

Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20211014050606.7288-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 19:18:53 -07:00
Randy Dunlap
523994ba3a net: intel: igc_ptp: fix build for UML
On a UML build, the igc_ptp driver uses CONFIG_X86_TSC for timestamp
conversion. The function that is used is not available on UML builds,
so have the function use the default system_counterval_t timestamp
instead for UML builds.

Prevents this build error on UML:

../drivers/net/ethernet/intel/igc/igc_ptp.c: In function ‘igc_device_tstamp_to_system’:
../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: implicit declaration of function ‘convert_art_ns_to_tsc’ [-Werror=implicit-function-declaration]
  return convert_art_ns_to_tsc(tstamp);
../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: incompatible types when returning type ‘int’ but ‘struct system_counterval_t’ was expected
  return convert_art_ns_to_tsc(tstamp);

Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Link: https://lore.kernel.org/r/20211014050516.6846-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 19:18:40 -07:00
Randy Dunlap
cd2621d07d net: fealnx: fix build for UML
On i386, when builtin (not a loadable module), the fealnx driver
inspects boot_cpu_data to see what CPU family it is running on, and
then acts on that data. The "family" struct member (x86) does not exist
when running on UML, so prevent that test and do the default action.

Prevents this build error on UML + i386:

../drivers/net/ethernet/fealnx.c: In function ‘netdev_open’:
../drivers/net/ethernet/fealnx.c:861:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’

Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20211014050500.5620-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 19:18:22 -07:00
Jiasheng Jiang
78e0a00691 hv_netvsc: Add comment of netvsc_xdp_xmit()
Adding comment to avoid the misusing of netvsc_xdp_xmit().
Otherwise the value of skb->queue_mapping could be 0 and
then the return value of skb_get_rx_queue() could be MAX_U16
cause by overflow.

Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1634174786-1810351-1-git-send-email-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 19:17:57 -07:00
Jakub Kicinski
c47fedba94 Merge branch 'minor-managed-neighbor-follow-ups'
Daniel Borkmann says:

====================
Minor managed neighbor follow-ups

Minor follow-up series to address prior feedback from David and Jakub.
Patch 1 adds a build time assertion to prevent overflows when shifting
in extended flags, patch 2 is a cleanup to use NLA_POLICY_MASK instead
of open-coding invalid flags rejection and patch 3 rejects creating new
neighbors with NUD_PERMANENT & NTF_MANAGED. For details, see individual
patches.
====================

Link: https://lore.kernel.org/r/20211013132140.11143-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14 19:16:24 -07:00