Commit graph

1,089,026 commits

Author SHA1 Message Date
Linus Torvalds
1626d9a35e sound fixes for 5.15-rc6
This contains quite a few device-specific fixes for usual HD- and
 USB-audio in addition to a couple of ALSA core fixes (a UAF fix in
 sequencer and a fix for a misplaced PCM 32bit compat ioctl).
 Nothing really stands out.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmFoIj8OHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE9IrBAAvYoJvsUsZUwUSw0istIVaNiVBE4u91IBsNe/
 W3WHVYAO4rLgZFfnasZ0kaPQ/BEwNhuk/vrJueZJuKU/kF8nCrYNX+nr8SB902Ws
 xdoZhROtIIh9B8NO0D6yeYlIByJ1dldlqn/4+ujzPnY7ISWGbJ2KIcusnSsCte+e
 2qMhT2paxjuSUFPZiPbXDGKPYcWYwn0lf7XjLe5lVlTAmHW2wX2PDs0wppkIXcXZ
 C9Tkbz4SfCWh+HKrAd1AbYpP+OAF/9EetXGdBFDaZHex/AxNNi02588Fc84/Ofno
 XxlO5/Z9O5VYVflsEGnF6B18D+Xsj94TC5h598OVDPgi5z2UgpQZusWTLGBfn4O4
 LUbM+NYbLeaWLAwKi6wdAWq1b4eKx5m9Uxysb40bumR38rfauCTedolB+8OpsaRs
 /kRjZmthgNXWDfjgAT6bPubwzpRdqscxA/SfY8lCObXVqgSdrmeFPCCqXYekKx4L
 Xazx0tyMxbpIAoSo+rWzErLntpQ4Rijtq4t3mLcfl1U7m3tkq/D2zBHrrxENJSuC
 TMko6F3maUSkGcGv+MMA2YO+J8juVEZ/vQFVT4C6PbOt1UnlpDQ8BHDxor+bVRpf
 txK0o+5WOkPySRik1IkLRhScF0QIYbZnrdG/zSbSkcsDmxNbt3F1Jb5EGLheBpA4
 yvzncTk=
 =sxyi
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This contains quite a few device-specific fixes for usual HD- and
  USB-audio in addition to a couple of ALSA core fixes (a UAF fix in
  sequencer and a fix for a misplaced PCM 32bit compat ioctl).

  Nothing really stands out"

* tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk for VF0770
  ALSA: hda: avoid write to STATESTS if controller is in reset
  ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW
  ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl
  ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2
  ALSA: hda: intel: Allow repeatedly probing on codec configuration errors
  ALSA: hda/realtek: Add quirk for TongFang PHxTxX1
  ALSA: hda/realtek - ALC236 headset MIC recording issue
  ALSA: usb-audio: Enable rate validation for Scarlett devices
  ALSA: hda/realtek: Add quirk for Clevo X170KM-G
  ALSA: hda/realtek: Complete partial device name to avoid ambiguity
  ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254
  ALSA: seq: Fix a potential UAF by wrong private_free call order
  ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop
  ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer
2021-10-14 09:53:36 -04:00
Steven Clarkson
aef454b402 ALSA: hda/realtek: Add quirk for Clevo PC50HS
Apply existing PCI quirk to the Clevo PC50HS and related models to fix
audio output on the built in speakers.

Signed-off-by: Steven Clarkson <sc@lambdal.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-14 15:41:42 +02:00
Jani Nikula
05734ca2a8 drm/i915/bios: gracefully disable dual eDP for now
For the time being, neither the power sequencer nor the backlight code
properly support two eDP panels simultaneously. While the software
states will be independent, the same sets of registers will be used for
both eDP panels, clobbering the hardware state and leading to errors.

Gracefully disable dual eDP until proper support has been added.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005175636.24669-1-jani.nikula@intel.com
2021-10-14 16:29:26 +03:00
Mark Brown
531558b56b
Merge branch 'spi-5.15' into spi-5.16 2021-10-14 14:15:46 +01:00
Greg Kroah-Hartman
22390ce786 ALSA: usb-audio: add Schiit Hel device to quirk table
The Shciit Hel device responds to the ctl message for the mic capture
switch with a timeout of -EPIPE:

	usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
	usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
	usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
	usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1

This seems safe to ignore as the device works properly with the control
message quirk, so add it to the quirk table so all is good.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/YWgR3nOI1osvr5Yo@kroah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-14 14:39:06 +02:00
Nehal Bakulchandra Shah
660a92a59b usb: xhci: Enable runtime-pm by default on AMD Yellow Carp platform
AMD's Yellow Carp platform supports runtime power management for
XHCI Controllers, so enable the same by default for all XHCI Controllers.

[ regrouped and aligned the PCI_DEVICE_ID definitions -Mathias]

Cc: stable <stable@vger.kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211014121200.75433-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-14 14:36:10 +02:00
Uwe Kleine-König
16a8e2fbb2
spi-mux: Fix false-positive lockdep splats
io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls
spi_setup() which results in a nested lock of io_mutex.

add_lock is taken by spi_add_device(). The device_add() call in there
can result in calling spi-mux's .probe() callback which registers its
own spi controller which in turn results in spi_add_device() being
called again.

To fix this initialize the controller's locks already in
spi_alloc_controller() to give spi_mux_probe() a chance to set the
lockdep subclass.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-14 13:32:19 +01:00
Derek Fang
4b19e4a77c
ASoC: rt5682: fix a little pop while playback
A little pop can be heard obviously from HP while playing a silent.
This patch fixes it by using two functions:
1. Enable HP 1bit output mode.
2. Change the charge pump switch size during playback on and off.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211014094054.811-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-14 12:47:31 +01:00
Mark Brown
6098475d4c
spi: Fix deadlock when adding SPI controllers on SPI buses
Currently we have a global spi_add_lock which we take when adding new
devices so that we can check that we're not trying to reuse a chip
select that's already controlled.  This means that if the SPI device is
itself a SPI controller and triggers the instantiation of further SPI
devices we trigger a deadlock as we try to register and instantiate
those devices while in the process of doing so for the parent controller
and hence already holding the global spi_add_lock.  Since we only care
about concurrency within a single SPI bus move the lock to be per
controller, avoiding the deadlock.

This can be easily triggered in the case of spi-mux.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-14 12:47:29 +01:00
Christian Brauner
ee9955d61a
mm: use pidfd_get_task()
Instead of duplicating the same code in two places use the newly added
pidfd_get_task() helper. This fixes an (unimportant for now) bug where
PIDTYPE_PID is used whereas PIDTYPE_TGID should have been used.

Link: https://lore.kernel.org/r/20211004125050.1153693-3-christian.brauner@ubuntu.com
Link: https://lore.kernel.org/r/20211011133245.1703103-3-brauner@kernel.org
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Bobrowski <repnop@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Reviewed-by: Matthew Bobrowski <repnop@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-10-14 13:29:22 +02:00
Christian Brauner
e9bdcdbf69
pid: add pidfd_get_task() helper
The number of system calls making use of pidfds is constantly
increasing. Some of those new system calls duplicate the code to turn a
pidfd into task_struct it refers to. Give them a simple helper for this.

Link: https://lore.kernel.org/r/20211004125050.1153693-2-christian.brauner@ubuntu.com
Link: https://lore.kernel.org/r/20211011133245.1703103-2-brauner@kernel.org
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Bobrowski <repnop@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Reviewed-by: Matthew Bobrowski <repnop@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-10-14 13:29:18 +02:00
Hans de Goede
f809891ee5 platform/x86: thinkpad_acpi: Register a privacy-screen device
Register a privacy-screen device on laptops with a privacy-screen,
this exports the PrivacyGuard features to user-space using a
standardized vendor-agnostic sysfs interface. Note the sysfs interface
is read-only.

Registering a privacy-screen device with the new privacy-screen class
code will also allow the GPU driver to get a handle to it and export
the privacy-screen setting as a property on the DRM connector object
for the LCD panel. This DRM connector property is a new standardized
interface which all user-space code should use to query and control
the privacy-screen.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-9-hdegoede@redhat.com
2021-10-14 13:25:13 +02:00
Hans de Goede
e8b7eb6673 platform/x86: thinkpad_acpi: Get privacy-screen / lcdshadow ACPI handles only once
Get the privacy-screen / lcdshadow ACPI handles once and cache them,
instead of retrieving them every time we need them.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-8-hdegoede@redhat.com
2021-10-14 13:25:10 +02:00
Colin Ian King
0eab756f88 mmc: moxart: Fix null pointer dereference on pointer host
There are several error return paths that dereference the null pointer
host because the pointer has not yet been set to a valid value.
Fix this by adding a new out_mmc label and exiting via this label
to avoid the host clean up and hence the null pointer dereference.

Addresses-Coverity: ("Explicit null dereference")
Fixes: 8105c2abbf ("mmc: moxart: Fix reference count leaks in moxart_probe")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20211013100052.125461-1-colin.king@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-14 13:21:42 +02:00
Ulf Hansson
92d23216fe Merge branch 'fixes' into next 2021-10-14 13:21:27 +02:00
Andy Shevchenko
6ab4e2eb5e mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield
Intel Merrifield platform had been converted to use ACPI enumeration.
However, the driver missed an update to retrieve card detect GPIO.
Fix it here.

Unfortunately we can't rely on CD GPIO state because there are two
different PCB designs in the wild that are using the opposite card
detection sense and there is no way to distinguish those platforms,
that's why ignore CD GPIO completely and use it only as an event.

Fixes: 4590d98f5a ("sfi: Remove framework for deprecated firmware")
BugLink: https://github.com/edison-fw/meta-intel-edison/issues/135
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211013201723.52212-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-14 13:20:17 +02:00
Hans de Goede
1b8101d518 platform/x86: thinkpad_acpi: Add hotkey_notify_extended_hotkey() helper
Factor the extended hotkey handling out of hotkey_notify_hotkey() and
into a new hotkey_notify_extended_hotkey() helper.

This is a preparation patch for adding support the privacy-screen hotkey
toggle (which needs some special handling, it should NOT send an evdev
key-event to userspace...).

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-7-hdegoede@redhat.com
2021-10-14 13:16:57 +02:00
Hans de Goede
334f74ee85 drm/connector: Add a drm_connector privacy-screen helper functions (v2)
Add 2 drm_connector privacy-screen helper functions:

1. drm_connector_attach_privacy_screen_provider(), this function creates
and attaches the standard privacy-screen properties and registers a
generic notifier for generating sysfs-connector-status-events on external
changes to the privacy-screen status.

2. drm_connector_update_privacy_screen(), update the privacy-screen's
sw_state if the connector has a privacy-screen.

Changes in v2:
- Do not update connector->state->privacy_screen_sw_state on
  atomic-commits.
- Change drm_connector_update_privacy_screen() to take drm_connector_state
  as argument instead of a full drm_atomic_state. This allows the helper
  to be called by drivers when they are enabling crtcs/encoders/connectors.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-6-hdegoede@redhat.com
2021-10-14 13:12:26 +02:00
Hans de Goede
8a12b17055 drm/privacy-screen: Add notifier support (v2)
Add support for privacy-screen consumers to register a notifier to
be notified of external (e.g. done by the hw itself on a hotkey press)
state changes.

Changes in v2:
- Drop WARN_ON(mutex_is_locked(&priv->lock)) check in
  drm_privacy_screen_call_notifier_chain() it may be locked by
  another thread, which would lead to a false-positive triggering
  of the check

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-5-hdegoede@redhat.com
2021-10-14 13:12:25 +02:00
Hans de Goede
befe5404a0 drm/privacy-screen: Add X86 specific arch init code
Add X86 specific arch init code, which fills the privacy-screen lookup
table by checking for various vendor specific ACPI interfaces for
controlling the privacy-screen.

This initial version only checks for the Lenovo Thinkpad specific ACPI
methods for privacy-screen control.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-4-hdegoede@redhat.com
2021-10-14 13:12:24 +02:00
Hans de Goede
a1a9868930 drm: Add privacy-screen class (v4)
On some new laptops the LCD panel has a builtin electronic privacy-screen.
We want to export this functionality as a property on the drm connector
object. But often this functionality is not exposed on the GPU but on some
other (ACPI) device.

This commit adds a privacy-screen class allowing the driver for these
other devices to register themselves as a privacy-screen provider; and
allowing the drm/kms code to get a privacy-screen provider associated
with a specific GPU/connector combo.

Changes in v2:
- Make CONFIG_DRM_PRIVACY_SCREEN a bool which controls if the drm_privacy
  code gets built as part of the main drm module rather then making it
  a tristate which builds its own module.
- Add a #if IS_ENABLED(CONFIG_DRM_PRIVACY_SCREEN) check to
  drm_privacy_screen_consumer.h and define stubs when the check fails.
  Together these 2 changes fix several dependency issues.
- Remove module related code now that this is part of the main drm.ko
- Use drm_class as class for the privacy-screen devices instead of
  adding a separate class for this

Changes in v3:
- Make the static inline drm_privacy_screen_get_state() stub set sw_state
  and hw_state to PRIVACY_SCREEN_DISABLED to squelch an uninitialized
  variable warning when CONFIG_DRM_PRIVICAY_SCREEN is not set

Changes in v4:
- Make drm_privacy_screen_set_sw_state() skip calling out to the hw if
  hw_state == new_sw_state

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-3-hdegoede@redhat.com
2021-10-14 13:12:21 +02:00
Rajat Jain
107fe90430 drm/connector: Add support for privacy-screen properties (v4)
Add support for generic electronic privacy screen properties, that
can be added by systems that have an integrated EPS.

Changes in v2 (Hans de Goede)
- Create 2 properties, "privacy-screen sw-state" and
  "privacy-screen hw-state", to deal with devices where the OS might be
  locked out of making state changes
- Write kerneldoc explaining how the 2 properties work together, what
  happens when changes to the state are made outside of the DRM code's
  control, etc.

Changes in v3 (Hans de Goede)
- Some small tweaks to the kerneldoc describing the 2 properties

Changes in v4 (Hans de Goede)
- Change the "Enabled, locked" and "Disabled, locked" hw-state enum value
  names to "Enabled-locked" and "Disabled-locked". The xrandr command shows
  all possible enum values separated by commas in its output, so having a
  comma in an enum name is not a good idea.
- Do not add a privacy_screen_hw_state member to drm_connector_state
  since this property is immutable its value must be directly stored in the
  obj->properties->values array

Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-2-hdegoede@redhat.com
2021-10-14 13:12:20 +02:00
Kees Cook
804bccba71 sched: Fill unconditional hole induced by sched_entity
With struct sched_entity before the other sched entities, its alignment
won't induce a struct hole. This saves 64 bytes in defconfig task_struct:

Before:
	...
        unsigned int               rt_priority;          /*   120     4 */

        /* XXX 4 bytes hole, try to pack */

        /* --- cacheline 2 boundary (128 bytes) --- */
        const struct sched_class  * sched_class;         /*   128     8 */

        /* XXX 56 bytes hole, try to pack */

        /* --- cacheline 3 boundary (192 bytes) --- */
        struct sched_entity        se __attribute__((__aligned__(64))); /*   192   448 */
        /* --- cacheline 10 boundary (640 bytes) --- */
        struct sched_rt_entity     rt;                   /*   640    48 */
        struct sched_dl_entity     dl __attribute__((__aligned__(8))); /*   688   224 */
        /* --- cacheline 14 boundary (896 bytes) was 16 bytes ago --- */

After:
	...
        unsigned int               rt_priority;          /*   120     4 */

        /* XXX 4 bytes hole, try to pack */

        /* --- cacheline 2 boundary (128 bytes) --- */
        struct sched_entity        se __attribute__((__aligned__(64))); /*   128   448 */
        /* --- cacheline 9 boundary (576 bytes) --- */
        struct sched_rt_entity     rt;                   /*   576    48 */
        struct sched_dl_entity     dl __attribute__((__aligned__(8))); /*   624   224 */
        /* --- cacheline 13 boundary (832 bytes) was 16 bytes ago --- */

Summary diff:
-	/* size: 7040, cachelines: 110, members: 188 */
+	/* size: 6976, cachelines: 109, members: 188 */

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210924025450.4138503-1-keescook@chromium.org
2021-10-14 13:09:58 +02:00
Zhang Qiao
4ef0c5c6b5 kernel/sched: Fix sched_fork() access an invalid sched_task_group
There is a small race between copy_process() and sched_fork()
where child->sched_task_group point to an already freed pointer.

	parent doing fork()      | someone moving the parent
				 | to another cgroup
  -------------------------------+-------------------------------
  copy_process()
      + dup_task_struct()<1>
				  parent move to another cgroup,
				  and free the old cgroup. <2>
      + sched_fork()
	+ __set_task_cpu()<3>
	+ task_fork_fair()
	  + sched_slice()<4>

In the worst case, this bug can lead to "use-after-free" and
cause panic as shown above:

  (1) parent copy its sched_task_group to child at <1>;

  (2) someone move the parent to another cgroup and free the old
      cgroup at <2>;

  (3) the sched_task_group and cfs_rq that belong to the old cgroup
      will be accessed at <3> and <4>, which cause a panic:

  [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  [] PGD 8000001fa0a86067 P4D 8000001fa0a86067 PUD 2029955067 PMD 0
  [] Oops: 0000 [#1] SMP PTI
  [] CPU: 7 PID: 648398 Comm: ebizzy Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0.x86_64+ #1
  [] RIP: 0010:sched_slice+0x84/0xc0

  [] Call Trace:
  []  task_fork_fair+0x81/0x120
  []  sched_fork+0x132/0x240
  []  copy_process.part.5+0x675/0x20e0
  []  ? __handle_mm_fault+0x63f/0x690
  []  _do_fork+0xcd/0x3b0
  []  do_syscall_64+0x5d/0x1d0
  []  entry_SYSCALL_64_after_hwframe+0x65/0xca
  [] RIP: 0033:0x7f04418cd7e1

Between cgroup_can_fork() and cgroup_post_fork(), the cgroup
membership and thus sched_task_group can't change. So update child's
sched_task_group at sched_post_fork() and move task_fork() and
__set_task_cpu() (where accees the sched_task_group) from sched_fork()
to sched_post_fork().

Fixes: 8323f26ce3 ("sched: Fix race in task_group")
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20210915064030.2231-1-zhangqiao22@huawei.com
2021-10-14 13:09:58 +02:00
Yicong Yang
f9ec6fea20 sched/topology: Remove unused numa_distance in cpu_attach_domain()
numa_distance in cpu_attach_domain() is introduced in
commit b5b217346d ("sched/topology: Warn when NUMA diameter > 2")
to warn user when NUMA diameter > 2 as we'll misrepresent
the scheduler topology structures at that time. This is
fixed by Barry in commit 585b6d2723 ("sched/topology: fix the issue
groups don't span domain->span for NUMA diameter > 2") and
numa_distance is unused now. So remove it.

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20210915063158.80639-1-yangyicong@hisilicon.com
2021-10-14 13:09:58 +02:00
Bharata B Rao
7d380f24fe sched/numa: Fix a few comments
Fix a few comments to help understand them better.

Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20211004105706.3669-4-bharata@amd.com
2021-10-14 13:09:58 +02:00
Bharata B Rao
5b763a14a5 sched/numa: Remove the redundant member numa_group::fault_cpus
numa_group::fault_cpus is actually a pointer to the region
in numa_group::faults[] where NUMA_CPU stats are located.

Remove this redundant member and use numa_group::faults[NUMA_CPU]
directly like it is done for similar per-process numa fault stats.

There is no functionality change due to this commit.

Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20211004105706.3669-3-bharata@amd.com
2021-10-14 13:09:58 +02:00
Bharata B Rao
7a2341fc1f sched/numa: Replace hard-coded number by a define in numa_task_group()
While allocating group fault stats, task_numa_group()
is using a hard coded number 4. Replace this by
NR_NUMA_HINT_FAULT_STATS.

No functionality change in this commit.

Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20211004105706.3669-2-bharata@amd.com
2021-10-14 13:09:58 +02:00
Peter Zijlstra
5de62ea84a sched,livepatch: Use wake_up_if_idle()
Make sure to prod idle CPUs so they call klp_update_patch_state().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com> # on s390
Link: https://lkml.kernel.org/r/20210929151723.162004989@infradead.org
2021-10-14 13:09:25 +02:00
Christophe Leroy
3091f5fc5f powerpc: Mark .opd section read-only
.opd section contains function descriptors used to locate
functions in the kernel. If someone is able to modify a
function descriptor he will be able to run arbitrary
kernel function instead of another.

To avoid that, move .opd section inside read-only memory.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3cd40b682fb6f75bb40947b55ca0bac20cb3f995.1634136222.git.christophe.leroy@csgroup.eu
2021-10-14 21:47:34 +11:00
Athira Rajeev
8f6aca0e0f powerpc/perf: Fix cycles/instructions as PM_CYC/PM_INST_CMPL in power10
On power9 and earlier platforms, the default event used for cyles and
instructions is PM_CYC (0x0001e) and PM_INST_CMPL (0x00002)
respectively. These events use two programmable PMCs and by default will
count irrespective of the run latch state (idle state). But since they
use programmable PMCs, these events can lead to multiplexing with other
events, because there are only 4 programmable PMCs. Hence in power10,
performance monitoring unit (PMU) driver uses performance monitor
counter 5 (PMC5) and performance monitor counter6 (PMC6) for counting
instructions and cycles.

Currently on power10, the event used for cycles is PM_RUN_CYC (0x600F4)
and instructions uses PM_RUN_INST_CMPL (0x500fa). But counting of these
events in idle state is controlled by the CC56RUN bit setting in Monitor
Mode Control Register0 (MMCR0). If the CC56RUN bit is zero, PMC5/6 will
not count when CTRL[RUN] (run latch) is zero. This could lead to missing
some counts if a thread is in idle state during system wide profiling.

To fix it, set the CC56RUN bit in MMCR0 for power10, which makes PMC5
and PMC6 count instructions and cycles regardless of the run latch
state. Since this change make PMC5/6 count as PM_INST_CMPL/PM_CYC,
rename the event code 0x600f4 as PM_CYC instead of PM_RUN_CYC and event
code 0x500fa as PM_INST_CMPL instead of PM_RUN_INST_CMPL. The changes
are only for PMC5/6 event codes and will not affect the behaviour of
PM_RUN_CYC/PM_RUN_INST_CMPL if progammed in other PMC's.

Fixes: a64e697cef ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.cm>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Tweak change log wording for style and consistency]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007075121.28497-1-atrajeev@linux.vnet.ibm.com
2021-10-14 21:46:45 +11:00
Hans Potsch
d9b7748ffc EDAC/armada-xp: Fix output of uncorrectable error counter
The number of correctable errors is displayed as uncorrectable
errors because the "SBE" error count is passed to both calls of
edac_mc_handle_error().

Pass the correct uncorrectable error count to the second
edac_mc_handle_error() call when logging uncorrectable errors.

 [ bp: Massage commit message. ]

Fixes: 7f6998a412 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC")
Signed-off-by: Hans Potsch <hans.potsch@nokia.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com
2021-10-14 11:46:03 +02:00
Jani Nikula
1eecf31e3c drm/i915: split out vlv sideband to a separate file
The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].

Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com
2021-10-14 12:22:55 +03:00
Jim Cromie
7edde0c807 dyndbg: no vpr-info on empty queries
when `echo $cmd > control` contains multiple queries, extra query
separators (;\n) can parse as empty statements.  This is normal, and a
vpr-info on an empty command is just noise.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20211013220726.1280565-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-14 10:59:14 +02:00
Jim Cromie
7a5e202dfb dyndbg: vpr-info on remove-module complete, not starting
On qemu --smp 3 runs, remove-module can get called 3 times.
So don't print on entry; instead print "removed" after entry is
found and removed, so just once.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20211013220726.1280565-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-14 10:59:10 +02:00
Andy Shevchenko
f0ada6da3a device property: Add missed header in fwnode.h
When adding some stuff to the header file we must not rely on
implicit dependencies that are happen by luck or bugs in other
headers. Hence fwnode.h needs to use bits.h directly.

Fixes: c2c724c868 ("driver core: Add fw_devlink_parse_fwtree()")
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211013143707.80222-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-14 10:48:56 +02:00
Andrew Halaney
5879f1c94d Documentation: dyndbg: Improve cli param examples
Jim pointed out that using $module.dyndbg= is always a more flexible
choice for using dynamic debug on the command line. The $module.dyndbg
style is checked at boot and handles if $module is a builtin. If it is
actually a loadable module, it is handled again later when the module is
loaded.

If you just use dyndbg="module $module +p" dynamic debug is only enabled
when $module is a builtin.

It was recommended to illustrate wildcard usage as well.

Suggested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-4-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-14 10:48:56 +02:00
Andrew Halaney
9c40e1aa84 dyndbg: Remove support for ddebug_query param
This param has been deprecated for a very long time now, let's rip it
out.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-3-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-14 10:48:56 +02:00
Andrew Halaney
5ca1739748 dyndbg: make dyndbg a known cli param
Right now dyndbg shows up as an unknown parameter if used on boot:

    Unknown command line parameters: dyndbg=+p

That's because it is unknown, it doesn't sit in the __param
section, so the processing done to warn users supplying an unknown
parameter doesn't think it is legitimate.

Install a dummy handler to register it. dynamic debug needs to search
the whole command line for modules listed that are currently builtin,
so there's no real work to be done in this callback.

Fixes: 86d1919a4f ("init: print out unknown kernel parameters")
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-2-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-14 10:48:56 +02:00
Geert Uytterhoeven
12ee311887 arm64: dts: renesas: rcar-gen3e: Add Cortex-A57 2 GHz opps
Add operating points for running the Cortex-A57 CPU cores on R-Car
H3e-2G, M3e-2G, and M3Ne-2G at 2 GHz.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/08a0f27f50b8ad4a78c05186190bebcfb364fe8f.1634200489.git.geert+renesas@glider.be
2021-10-14 10:46:46 +02:00
Biju Das
361b0dcbd7 arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet
Enable Ethernet{0,1} interfaces on RZ/G2L SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211013075647.32231-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-14 10:46:46 +02:00
Biju Das
38ad23e15a arm64: dts: renesas: r9a07g044: Add GbEthernet nodes
Add Gigabit Ethernet{0,1} nodes to SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211013075647.32231-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-14 10:46:46 +02:00
Niklas Söderlund
c534e655d5 arm64: dts: renesas: Add ports node to all adv7482 nodes
The different port@ entries of the adv7482 nodes shall be encapsulated
in a ports node, add one.  This change does not change how the driver
parses the DT and no driver change is needed.

The change however makes it possible to validate the source files with a
correct json-schema.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211012183431.718691-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-14 10:46:46 +02:00
Niklas Söderlund
5fea5b5571 arm64: dts: renesas: r8a779a0: Add and connect all CSI-2, ISP and VIN nodes
The V3U have 32 VIN, 4 CSI-2 and 4 ISP nodes that interact with each
other for video capture. Add all nodes and record how they are
interconnected.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211012100038.375289-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-14 10:46:46 +02:00
John Wang
4eb7fe3333 ARM: dts: aspeed: fp5280g2: Use the 64M layout
Use the 64M layout since the flash on the board is 64M

Signed-off-by: John Wang <wangzhiqiang02@inspur.com>
Link: https://lore.kernel.org/r/20211014072743.939293-1-wangzhiqiang02@inspur.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-14 18:25:17 +10:30
Chukun Pan
d4949bf9cc
arm64: dts: allwinner: NanoPi R1S H5: Add generic compatible string for I2C EEPROM
The 'microchip,24c02' compatible does not match the at24 driver, so
add this generic fallback to the device node compatible string to
make the device to match the driver using the OF device ID table.

Also set this eeprom to read-only mode because it stores the mac
address of the onboard usb network card.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211010135017.6855-2-amadeus@jmu.edu.cn
2021-10-14 09:17:42 +02:00
Adam Manzanares
be5eb93354 nvme: fix per-namespace chardev deletion
Decrease reference count of chardevice during char device deletion in
order to fix a memory leak.  Add a release callabck for the device
associated chardev and move ida_simple_remove into the release function.

Fixes: 2637baed78 ("nvme: introduce generic per-namespace chardev")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Javier González <javier@javigon.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-14 08:07:47 +02:00
Namjae Jeon
dbad63001e ksmbd: validate compound response buffer
Add the check to validate compound response buffer.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-10-13 23:37:19 -05:00
Namjae Jeon
9a63b999ae ksmbd: fix potencial 32bit overflow from data area check in smb2_write
DataOffset and Length validation can be potencial 32bit overflow.
This patch fix it.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-10-13 23:37:19 -05:00
Hyunchul Lee
bf8acc9e10 ksmbd: improve credits management
* Requests except READ, WRITE, IOCTL, INFO, QUERY
DIRECOTRY, CANCEL must consume one credit.
* If client's granted credits are insufficient,
refuse to handle requests.
* Windows server 2016 or later grant up to 8192
credits to clients at once.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-10-13 23:37:19 -05:00