Update my email address to kernel.org to allow distinction between my
"upstream" and "Red" Hats.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Userspace is up to now limited to 32-bit, so it's sufficient to print
only 32-bit values when showing pointer addresses.
Signed-off-by: Helge Deller <deller@gmx.de>
Convert the inline assembly code to use the automatic EFAULT exception
handler. With that the fixup code can be dropped.
The other change is to allow double-word only when a 64-bit kernel is
used instead of depending on CONFIG_PA20.
Signed-off-by: Helge Deller <deller@gmx.de>
The get_current() code uses the mfctl() macro to get the pointer to the
current task struct from %cr30. The problem with the mfctl() macro is,
that it is marked volatile which is basically correct, because mfctl()
is used to get e.g. the current internal timer or interrupt flags as
well.
But specifically the task struct pointer (%cr30) doesn't change over
time when the kernel executes code for a task.
So, by dropping the volatile when retrieving %cr30 the compiler is now
able to get this value only once and optimize the generated code a lot.
A bloat-o-meter comparism shows that this patch saves ~5kB kernel code
on a 32-bit kernel and ~6kB kernel code on a 64-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Instead of hardcoding the space registers as strings, use the SR_USER
and SR_KERNEL constants to form the space register in the access
functions.
Signed-off-by: Helge Deller <deller@gmx.de>
Provide defines for space registers (SR_KERNEL, SR_USER, ...) which
should be used instead of hardcoding the values.
Signed-off-by: Helge Deller <deller@gmx.de>
This patch drops the CONFIG_PARISC_SELF_EXTRACT option.
The palo boot loader is able to decompress a kernel which was compressed
with gzip. That possibility was useful when the Linux kernel
self-extracting feature wasn't implemented yet.
Beside the fact that the self-extracting feature offers much better
compression rates, we do support self-extracting kernels already since
kernel v4.14, so now it's really time to get rid of that old option and
always use the self-extractor.
Signed-off-by: Helge Deller <deller@gmx.de>
The stifb driver (for Artist/HCRX graphics on PA-RISC) was missing
the fillrect function.
Tested on a 715/64 PA-RISC machine and in qemu.
Signed-off-by: Helge Deller <deller@gmx.de>
Add minimal vDSO support, which provides the signal trampoline helpers,
but none of the userspace syscall helpers like time wrappers.
The big benefit of this vDSO implementation is, that we now don't need
an executeable stack any longer. PA-RISC is one of the last
architectures where an executeable stack was needed in oder to implement
the signal trampolines by putting assembly instructions on the stack
which then gets executed. Instead the kernel will provide the relevant
code in the vDSO page and only put the pointers to the signal
information on the stack.
By dropping the need for executable stacks we avoid running into issues
with applications which want non executable stacks for security reasons.
Additionally, alternative stacks on memory areas without exec
permissions are supported too.
This code is based on an initial implementation by Randolph Chung from 2006:
https://lore.kernel.org/linux-parisc/4544A34A.6080700@tausq.org/
I did the porting and lifted the code to current code base. Dave fixed
the unwind code so that gdb and glibc are able to backtrace through the
code. An additional patch to gdb will be pushed upstream by Dave.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: Randolph Chung <randolph@tausq.org>
Signed-off-by: Helge Deller <deller@gmx.de>
With the latest cache fix for non-access faults and the support for
non-access faults (code 17) in handle_interruption, we can remove
the fast path emulation for fdc, fic, pdc, lpa, probe and probei
instructions.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.
This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.
This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.
This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).
V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
When a page is not present, we get non-access data TLB faults from
the fdc and fic instructions in flush_user_dcache_range_asm and
flush_user_icache_range_asm. When these occur, the cache line is
not invalidated and potentially we get memory corruption. The
problem was hidden by the nullification of the flush instructions.
These faults also affect performance. With pa8800/pa8900 processors,
there will be 32 faults per 4 KB page since the cache line is 128
bytes. There will be more faults with earlier processors.
The problem is fixed by using flush_cache_pages(). It does the flush
using a tmp alias mapping.
The flush_cache_pages() call in flush_cache_range() flushed too
large a range.
V2: Remove unnecessary preempt_disable() and preempt_enable() calls.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
There is a limited amount of SGX memory (EPC) on each system. When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code. Instead of
swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code. There is a hierarchy like this:
EPC <-> shmem <-> disk
After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed. Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running. The
memory is recovered when the enclave is destroyed and the backing
storage freed.
Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC. In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.
Cc: stable@vger.kernel.org
Fixes: 1728ab54b4 ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org
Merge misc fixes from David Howells:
"A set of patches for watch_queue filter issues noted by Jann. I've
added in a cleanup patch from Christophe Jaillet to convert to using
formal bitmap specifiers for the note allocation bitmap.
Also two filesystem fixes (afs and cachefiles)"
* emailed patches from David Howells <dhowells@redhat.com>:
cachefiles: Fix volume coherency attribute
afs: Fix potential thrashing in afs writeback
watch_queue: Make comment about setting ->defunct more accurate
watch_queue: Fix lack of barrier/sync/lock between post and read
watch_queue: Free the alloc bitmap when the watch_queue is torn down
watch_queue: Fix the alloc bitmap size to reflect notes allocated
watch_queue: Use the bitmap API when applicable
watch_queue: Fix to always request a pow-of-2 pipe ring size
watch_queue: Fix to release page in ->release()
watch_queue, pipe: Free watchqueue state after clearing pipe ring
watch_queue: Fix filter limit check
A network filesystem may set coherency data on a volume cookie, and if
given, cachefiles will store this in an xattr on the directory in the
cache corresponding to the volume.
The function that sets the xattr just stores the contents of the volume
coherency buffer directly into the xattr, with nothing added; the
checking function, on the other hand, has a cut'n'paste error whereby it
tries to interpret the xattr contents as would be the xattr on an
ordinary file (using the cachefiles_xattr struct). This results in a
failure to match the coherency data because the buffer ends up being
shifted by 18 bytes.
Fix this by defining a structure specifically for the volume xattr and
making both the setting and checking functions use it.
Since the volume coherency doesn't work if used, take the opportunity to
insert a reserved field for future use, set it to 0 and check that it is
0. Log mismatch through the appropriate tracepoint.
Note that this only affects cifs; 9p, afs, ceph and nfs don't use the
volume coherency data at the moment.
Fixes: 32e150037d ("fscache, cachefiles: Store the volume coherency data")
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Steve French <smfrench@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In afs_writepages_region(), if the dirty page we find is undergoing
writeback or write to cache, but the sync_mode is WB_SYNC_NONE, we go
round the loop trying the same page again and again with no pausing or
waiting unless and until another thread manages to clear the writeback
and fscache flags.
Fix this with three measures:
(1) Advance start to after the page we found.
(2) Break out of the loop and return if rescheduling is requested.
(3) Arbitrarily give up after a maximum of 5 skips.
Fixes: 31143d5d51 ("AFS: implement basic file write support")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/164692725757.2097000.2060513769492301854.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.
Fixes: 21e28290b3 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220310120915.63349-1-lihuafei1@huawei.com
watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications. Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.
Remove the "new additions" bit from the comment.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's nothing to synchronise post_one_notification() versus
pipe_read(). Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.
Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().
If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, watch_queue_set_size() sets the number of notes available in
wqueue->nr_notes according to the number of notes allocated, but sets
the size of the bitmap to the unrounded number of notes originally asked
for.
Fix this by setting the bitmap size to the number of notes we're
actually going to make available (ie. the number allocated).
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use bitmap_alloc() to simplify code, improve the semantic and reduce
some open-coded arithmetic in allocator arguments.
Also change a memset(0xff) into an equivalent bitmap_fill() to keep
consistency.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pipe ring size must always be a power of 2 as the head and tail
pointers are masked off by AND'ing with the size of the ring - 1.
watch_queue_set_size(), however, lets you specify any number of notes
between 1 and 511. This number is passed through to pipe_resize_ring()
without checking/forcing its alignment.
Fix this by rounding the number of slots required up to the nearest
power of two. The request is meant to guarantee that at least that many
notifications can be generated before the queue is full, so rounding
down isn't an option, but, alternatively, it may be better to give an
error if we aren't allowed to allocate that much ring space.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a pipe ring descriptor points to a notification message, the
refcount on the backing page is incremented by the generic get function,
but the release function, which marks the bitmap, doesn't drop the page
ref.
Fix this by calling generic_pipe_buf_release() at the end of
watch_queue_pipe_buf_release().
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.
Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared. We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In watch_queue_set_filter(), there are a couple of places where we check
that the filter type value does not exceed what the type_filter bitmap
can hold. One place calculates the number of bits by:
if (tf[i].type >= sizeof(wfilter->type_filter) * 8)
which is fine, but the second does:
if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)
which is not. This can lead to a couple of out-of-bounds writes due to
a too-large type:
(1) __set_bit() on wfilter->type_filter
(2) Writing more elements in wfilter->filters[] than we allocated.
Fix this by just using the proper WATCH_TYPE__NR instead, which is the
number of types we actually know about.
The bug may cause an oops looking something like:
BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740
Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611
...
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x150
...
kasan_report.cold+0x7f/0x11b
...
watch_queue_set_filter+0x659/0x740
...
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 611:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
watch_queue_set_filter+0x23a/0x740
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88800d2c66a0
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 28 bytes inside of
32-byte region [ffff88800d2c66a0, ffff88800d2c66c0)
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We used to sort the plug list if we had multiple queues before dispatching
requests to the IO scheduler. This usually isn't needed, but for certain
workloads that interleave requests to disks, it's a less efficient to
process the plug list one-by-one if everything is interleaved.
Don't sort the list, but skip through it and flush out entries that have
the same target at the same time.
Fixes: df87eb0fce ("block: get rid of plug list sorting")
Reported-and-tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Song reports that a RAID rebuild workload runs much slower recently,
and it is seeing a lot less merging than it did previously. The reason
is that a previous commit reduced the amount of work we do for plug
merging. RAID rebuild interleaves requests between disks, so a last-entry
check in plug merging always misses a merge opportunity since we always
find a different disk than what we are looking for.
Modify the logic such that it's still a one-hit cache, but ensure that
we check enough to find the right target before giving up.
Fixes: d38a9c04c0 ("block: only check previous entry for plug merge attempt")
Reported-and-tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The rproc_da_to_va() API is an exported function, so move its
declaration from the remoteproc local remoteproc_internal.h
to the public remoteproc.h file.
This will allow drivers outside of the remoteproc folder to be
able to use this API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[adjusted line numbers to apply]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308172515.29556-1-dfustini@baylibre.com
qcom_smd's only child, smd-rpm uses arch_initcall and both have to be up
before almost anything else to ensure the MSM SoCs will work fine and
nothing will have to resort to probe defering, as this is the main pillar
of all things DVFS on these machines. Promote it to arch_initcall to avoid
such issues.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211230023253.1123142-1-konrad.dybcio@somainline.org
The example includes a board-specific compatible property, this is wrong
as the example should be board agnostic and should represent the particular
binding. Also, the file includes two similar examples but with a different
compatible. So, drop the entire second example
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210920123152.32751-1-sinthu.raja@ti.com
Switch the DT validation to use DTB files directly instead of a DTS to
YAML conversion.
The original motivation for supporting validation on DTB files was to
enable running validation on a running system (e.g. 'dt-validate
/sys/firmware/fdt') or other cases where the original source DTS is not
available.
The YAML format was not without issues. Using DTBs with the schema type
information solves some of those problems. The YAML format relies on the
DTS source level information including bracketing of properties, size
directives, and phandle tags all of which are lost in a DTB file. While
standardizing the bracketing is a good thing, it does cause a lot of
extra warnings and churn to fix them.
Another issue has been signed types are not validated correctly as sign
information is not propagated to YAML. Using the schema type information
allows for proper handling of signed types. YAML also can't represent
the full range of 64-bit integers as numbers are stored as floats by
most/all parsers.
The DTB validation works by decoding property values using the type
information in the schemas themselves. The main corner case this does
not work for is matrix types where neither dimension is fixed. For
now, checking the dimensions in these cases are skipped.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220310160513.1708182-3-robh@kernel.org
Add ftrace_boot_snapshot kernel parameter that will take a snapshot at the
end of boot up just before switching over to user space (it happens during
the kernel freeing of init memory).
This is useful when there's interesting data that can be collected from
kernel start up, but gets overridden by user space start up code. With
this option, the ring buffer content from the boot up traces gets saved in
the snapshot at the end of boot up. This trace can be read from:
/sys/kernel/tracing/snapshot
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The macro TRACE_DEFINE_ENUM is used to convert enums in the kernel to
their actual value when they are exported to user space via the trace
event format file.
Currently only the enums in the "print fmt" (TP_printk in the TRACE_EVENT
macro) have the enums converted. But the enums can be used to denote array
size:
field:unsigned int fc_ineligible_rc[EXT4_FC_REASON_MAX]; offset:12; size:36; signed:0;
The EXT4_FC_REASON_MAX has no meaning to userspace but it needs to know
that information to know how to parse the array.
Have the array indexes also be parsed as well.
Link: https://lore.kernel.org/all/cover.1646922487.git.riteshh@linux.ibm.com/
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
0-day reported the strncpy error below:
../kernel/trace/trace_events_synth.c: In function 'last_cmd_set':
../kernel/trace/trace_events_synth.c:65:9: warning: 'strncpy' specified bound depends on the length o\
f the source argument [-Wstringop-truncation]
65 | strncpy(last_cmd, str, strlen(str) + 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kernel/trace/trace_events_synth.c:65:32: note: length computed here
65 | strncpy(last_cmd, str, strlen(str) + 1);
| ^~~~~~~~~~~
There's no reason to use strncpy here, in fact there's no reason to do
anything but a simple kstrdup() (note we don't even need to check for
failure since last_cmod is expected to be either the last cmd string
or NULL, and the containing function is a void return).
Link: https://lkml.kernel.org/r/77deca8cbfd226981b3f1eab203967381e9b5bd9.camel@kernel.org
Fixes: 27c888da98 ("tracing: Remove size restriction on synthetic event cmd error logging")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Find user_events always while under the event_mutex and before leaving
the lock, add a ref count to the user_event. This ensures that all paths
under the event_mutex that check the ref counts will be synchronized.
The ioctl add/delete paths are protected by the reg_mutex. However,
dyn_event is only protected by the event_mutex. The dyn_event delete
path cannot acquire reg_mutex, since that could cause a deadlock between
the ioctl delete case acquiring event_mutex after acquiring the reg_mutex.
Link: https://lkml.kernel.org/r/20220310001141.1660-1-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To make it really easy to add custom events from modules, add a
TRACE_CUSTOM_EVENT() macro that acts just like the TRACE_EVENT() macro,
but creates a custom event to an already existing tracepoint.
The trace_custom_sched.[ch] has been updated to use this new macro to show
how simple it is.
Link: https://lkml.kernel.org/r/20220303220625.738622494@goodmis.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In an effort to add custom event macros that can be used to create your
own custom events based on existing tracepoints, move the defines of the
special macros used in TRACE_EVENT() into their own files such that they
can be reused for TRACE_CUSTOM_EVENT().
Link: https://lkml.kernel.org/r/20220303220625.553406495@goodmis.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add sample code to show how to create custom trace events in the tracefs
directory that can be enabled and modified like any event in tracefs
(including triggers, histograms, synthetic events and event probes).
The example is creating a custom sched_switch and a sched_waking to limit
what is recorded:
If the custom sched switch only records the prev_prio, next_prio and
next_pid, it can bring the size from 64 bytes per event, down to just 16
bytes!
If sched_waking only records the prio and pid of the woken event, it will
bring the size down from 36 bytes to 12 bytes per event.
This will allow for a much smaller footprint into the ring buffer and keep
more events from dropping.
Link: https://lkml.kernel.org/r/20220303220625.369226746@goodmis.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add support for creating filters for GTP-U and GTP-C in switchdev mode. Add
support for parsing GTP-specific options (QFI and PDU type) and TEID.
By default, a filter for GTP-U will be added. To add a filter for GTP-C,
specify enc_dst_port = 2123, e.g.:
tc filter add dev $GTP0 ingress prio 1 flower enc_key_id 1337 \
enc_dst_port 2123 action mirred egress redirect dev $VF1_PR
Note: GTP-U with outer IPv6 offload is not supported yet.
Note: GTP-U with no payload offload is not supported yet.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Checking only protocol ids while searching for correct FVs can lead to a
situation, when incorrect FV will be added to the list. Incorrect means
that FV has correct protocol id but incorrect offset.
Call ice_get_sw_fv_list with ice_prot_lkup_ext struct which contains all
protocol ids with offsets.
With this modification allocating and collecting protocol ids list is
not longer needed.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a function that checks if a net device type is GTP.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Options are as follows: PDU_TYPE:QFI and they refernce to
the fields from the PDU Session Protocol. PDU Session data
is conveyed in GTP-U Extension Header.
GTP-U Extension Header is described in 3GPP TS 29.281.
PDU Session Protocol is described in 3GPP TS 38.415.
PDU_TYPE - indicates the type of the PDU Session Information (4 bits)
QFI - QoS Flow Identifier (6 bits)
# ip link add gtp_dev type gtp role sgsn
# tc qdisc add dev gtp_dev ingress
# tc filter add dev gtp_dev protocol ip parent ffff: \
flower \
enc_key_id 11 \
gtp_opts 1:8/ff:ff \
action mirred egress redirect dev eth0
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Adding GTP device through ip link creates the situation where
GTP instance is not able to send GTP echo requests.
Echo requests are used to check if GTP peer is still alive.
With this patch, gtp_genl_ops are extended by new cmd (GTP_CMD_ECHOREQ)
which allows to send echo request in the given version of GTP
protocol (v0 or v1), from the given ms address to he given
peer. TID is not inclued because in all path management
messages it should be equal to 0.
When GTP echo response is detected, multicast message is
send to everyone in the gtp_genl_family. Message contains
GTP version, ms address and peer address.
Suggested-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Adding GTP device through ip link creates the situation where
there is no userspace daemon which would handle GTP messages
(Echo Request for example). GTP-U instance which would not respond
to echo requests would violate GTP specification.
When GTP packet arrives with GTP_ECHO_REQ message type,
GTP_ECHO_RSP is send to the sender. GTP_ECHO_RSP message
should contain information element with GTPIE_RECOVERY tag and
restart counter value. For GTPv1 restart counter is not used
and should be equal to 0, for GTPv0 restart counter contains
information provided from userspace(IFLA_GTP_RESTART_COUNT).
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Suggested-by: Harald Welte <laforge@gnumonks.org>
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Tested-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
