Commit graph

1,089,026 commits

Author SHA1 Message Date
Kai Ye
183b60e005 crypto: hisilicon/qm - modify the uacce mode check
As qm should register to uacce in UACCE_DEV_SVA mode,
this patch modifies to checks uacce mode before doing uacce
registration.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-08 20:02:36 +08:00
Sean Young
fd2eda71a4 media: remove myself from dvb media maintainers
I have not been able to give dvb the attention it needs, and now I have
even less time. Of course I will continue to maintain rc-core (infrared).

Unfortunately this means that dvb will have maintainance issues.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:56:25 +02:00
Anant Thazhemadam
899a61a330 media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()
In dibusb_read_eeprom_byte(), if dibusb_i2c_msg() fails, val gets
assigned an value that's not properly initialized.
Using kzalloc() in place of kmalloc() for the buffer fixes this issue,
as the val can now be set to 0 in the event dibusb_i2c_msg() fails.

Reported-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com
Tested-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:54:43 +02:00
Nil Yi
cefdc9510a media: rtl2832_sdr: clean the freed pointer and counter
After freed the dev->urb_list, we should set it to NULL as well as set
counter to zero.

Requested-by: Sean Young <sean@mess.org>
Signed-off-by: Nil Yi <teroincn@163.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:54:16 +02:00
Evgeny Novikov
69a10678e2 media: dvb-frontends: mn88443x: Handle errors of clk_prepare_enable()
mn88443x_cmn_power_on() did not handle possible errors of
clk_prepare_enable() and always finished successfully so that its caller
mn88443x_probe() did not care about failed preparing/enabling of clocks
as well.

Add missed error handling in both mn88443x_cmn_power_on() and
mn88443x_probe(). This required to change the return value of the former
from "void" to "int".

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 0f408ce894 ("media: dvb-frontends: add Socionext MN88443x ISDB-S/T demodulator driver")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:53:30 +02:00
Colin Ian King
57b660b22f media: mb86a20s: make arrays static const
Don't populate the read-only arrays on the stack but instead them
static const. Also makes the object code smaller by 154 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  42949	  22424	      0	  65373	   ff5d	media/dvb-frontends/mb86a20s.o

After:
   text	   data	    bss	    dec	    hex	filename
  42731	  22488	      0	  65219	   fec3	media/dvb-frontends/mb86a20s.o

(gcc version 11.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:43:54 +02:00
Ricardo Ribalda
dce6dd4493 media: ov5670: Add implementation for events
Use v4l2 control API helpers to support the events.

Fixes v4l2-compliance:

test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:42:26 +02:00
Ricardo Ribalda
5bd4098c3d media: ov13858: Add implementation for events
Use v4l2 control API helpers to support the events.

Fixes v4l2-compliance:

test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:42:07 +02:00
Ricardo Ribalda
98442bd098 media: dw9714: Add implementation for events
Use v4l2 control API helpers to support the events.

Fixes v4l2-compliance:

test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:41:48 +02:00
Ricardo Ribalda
ea2b9a3371 media: ipu3-imgu: VIDIOC_QUERYCAP: Fix bus_info
bus_info field had a different value for the media entity and the video
device.

Fixes v4l2-compliance:

v4l2-compliance.cpp(637): media bus_info 'PCI:0000:00:05.0' differs from
			  V4L2 bus_info 'PCI:viewfinder'

Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:41:23 +02:00
Ricardo Ribalda
553481e380 media: ipu3-imgu: imgu_fmt: Handle properly try
For a try_fmt call, the node noes not need to be enabled.

Fixes v4l2-compliance

fail: v4l2-test-formats.cpp(717): Video Output Multiplanar is valid, but
				  no TRY_FMT was implemented
test VIDIOC_TRY_FMT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:40:26 +02:00
Ricardo Ribalda
6c0f6c424f media: ipu3-imgu: Set valid initial format
The initial format did not have a valid size.

Fixes v4l2-compliance:

fail: v4l2-test-formats.cpp(723): Video Output Multiplanar:
				  TRY_FMT(G_FMT) != G_FMT
test VIDIOC_TRY_FMT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:40:10 +02:00
Ricardo Ribalda
3eacb6028e media: ipu3-imgu: Refactor bytesperpixel calculation
Move the calculation to an inline function, to it can be used by other
parts of the driver.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:30:09 +02:00
Ricardo Ribalda
37b198eeb0 media: ipu3-cio2 Check num_planes and sizes in queue_setup
If num_planes is different than zero num_planes and sizes must be
checked to support the format.

Fix the following v4l2-compliance error:

Buffer ioctls (Input 0):
    fail: v4l2-test-buffers.cpp(717): q.create_bufs(node, 1, &fmt) != EINVAL
  test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL

Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:27:07 +02:00
Niklas Söderlund
af1ffd628a media: rcar-isp: Add Renesas R-Car Image Signal Processor driver
Add a V4L2 driver for Renesas R-Car Image Signal Processor. The driver
supports the R-Car V3U SoC where the ISP IP sits between the R-Car CSI-2
receiver and VIN and filters the CSI-2 data based on VC/DT and directs
the video stream to different VIN IPs.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:26:43 +02:00
Yongqiang Niu
13d9624da4 soc: mediatek: add mtk mutex support for MT8192
Add mtk mutex support for MT8192 SoC.

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20210930155222.5861-5-yongqiang.niu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-10-08 13:25:43 +02:00
Rikard Falkeborn
c96651a002 media: staging/intel-ipu3: Constify static struct v4l2_subdev_internal_ops
The only usage of imgu_subdev_internal_ops is to assign its address to
the internal_ops field in the v4l2_subdev struct, which is a pointer to
const v4l2_subdev_internal_ops. Make it const to allow the compiler to
put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:25:42 +02:00
Sakari Ailus
566778bc1d media: admin-guide: Update i2c-cardlist
Add MIPI CCS compliant devices, a few Sony IMX, Hynix Hi-846 and
Omnivision ov13b10 sensors and the DW9768 lens driver to the list of
supported devices. Also drop SMIA since as a standard it is obsolete.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:24:52 +02:00
Martin Kepplinger
5fe23d700d media: Documentation: i2c-cardlist: add the Hynix hi846 sensor
Add the SK Hynix Hi-846 8M Pixel CMOS image sensor to the i2c-cardlist.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:24:04 +02:00
Martin Kepplinger
e8c0882685 media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera
The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports
usual features like I2C control, CSI-2 for frame data, digital/analog
gain control or test patterns.

This driver supports the 640x480, 1280x720 and 1632x1224 resolution
modes. It supports runtime PM in order not to draw any unnecessary power.

The part is also called YACG4D0C9SHC and a datasheet can be found at
https://product.skhynix.com/products/cis/cis.go

The large sets of partly undocumented register values are for example
found when searching for the hi846_mipi_raw_Sensor.c Android driver.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:23:23 +02:00
Martin Kepplinger
f3ce7200ca media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor
Document the bindings used for the SK Hynix Hi-846 CMOS camera driver.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:21:15 +02:00
Martin Kepplinger
203492ce39 media: dt-bindings: vendor-prefixes: Add SK Hynix Inc.
SK Hynix built the already supported hi556 sensor (and probably much
more). For more information, see https://www.skhynix.com/

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:18:01 +02:00
Fabian Wüthrich
485aa3df0d media: ipu3-cio2: Parse sensor orientation and rotation
The sensor orientation is read from the _PLC ACPI buffer and converted to a v4l2
format.

The sensor rotation is read from the SSDB ACPI buffer and converted into
degrees.

Signed-off-by: Fabian Wüthrich <me@fabwu.ch>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 13:17:37 +02:00
Jani Nikula
a94a6d76c9 drm/i915/mst: abstract intel_dp_mst_source_support()
Add a function for checking source MST support. Drop intel_dp->can_mst
and use intel_dp->mst_mgr.cbs to indicate the same. It's the single
point of truth without additional state variables. In code, "source
support" is also self-documenting as opposed to the vague "can mst".

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006101618.22066-1-jani.nikula@intel.com
2021-10-08 13:14:25 +03:00
Jani Nikula
c474420ba4 drm/i915/dp: take LTTPR into account in 128b/132b rates
Limit the supported UHBR rates based on the repeater support, if there
are repeaters.

This should be done in DP helper level, but that requires an overhaul of
the LTTPR handling, as the max rate is not enough to represent how
128b/132b rates may be masked along the way.

Curiously, the spec says:

* Shall be cleared to 00h when operating in 8b/10b Link Layer.

* Each LTTPR on the way back to the DPTX shall clear the bits that do
  not correspond to the LTTPR's current bit rate.

It's rather vague if we can reliably use the field at this time due to
the wording "operating" and "current". But it would seem bizarre to have
to wait until trying to operate a 128b/132b link layer at a certain bit
rate to figure this out.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007105727.18439-1-jani.nikula@intel.com
2021-10-08 12:44:50 +03:00
Dikshita Agarwal
16545aa3de media: venus: Set buffer to FW based on FW min count requirement.
- Get the min buffer count required by FW from source event change
  and use the same value to decide actual buffer count and for
  buffer size calculation.
- Setup DPB and OPB buffers after session continue incase of
  reconfig.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:14 +02:00
Dikshita Agarwal
fa622c3df4 media: venus: helpers: update NUM_MBS macro calculation
Consider alignment while calculating NUM_MBS.

Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:14 +02:00
Dikshita Agarwal
6483a8cbea media: venus: vdec: set work route to fw
Set work route to FW based on num of vpp pipes.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:14 +02:00
Dikshita Agarwal
78d434ba86 media: venus: hfi: Skip AON register programming for V6 1pipe
AON register programming is used to set NOC to low power mode
during V6 power off sequence. However AON register memory map
is not applicable to 1pipe, hence skipping AON register programming.

Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Co-developed-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:14 +02:00
Dikshita Agarwal
920173c7cf media: venus: Add num_vpp_pipes to resource structure
V6 HW can have vpp pipes as 1 or 4, add num_vpp_pipes
to resource struture to differentiate.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Dikshita Agarwal
275ad3b3ed media: venus: core: Add sc7280 DT compatible and resource data
Adds a sm7280 compatible binding to the venus core.

Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Dikshita Agarwal
afeae6ef07 media: venus: firmware: enable no tz fw loading for sc7280
Enable no tz FW loading and add routine to reset XTSS.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Dikshita Agarwal
e48b839b66 media: dt-bindings: media: venus: Add sc7280 dt schema
Add a schema description for the venus video encoder/decoder on
the sc7280.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Mansur Alisha Shaik
1444232152 media: venus: fix vpp frequency calculation for decoder
In existing video driver implementation vpp frequency calculation in
calculate_inst_freq() is always zero because the value of vpp_freq_per_mb
is always zero for decoder.

Fixed this by correcting the calculating the vpp frequency calculation for
decoder.

Fixes: 3cfe5815ce ("media: venus: Enable low power setting for encoder")
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Mansur Alisha Shaik
8c404ebae5 media: venus: vdec: update output buffer size during vdec_s_fmt()
Video driver maintains an internal context for the output buffer size.
During S_fmt() on capture plane, the output buffer size is not updated
in driver context. As a result, during buf_prepare(), the size of the
vb2_plane and internal size of the buffer, as maintained by the driver,
does not match. This leads to buf_prepare() failure.
Update the instance context for the output buffer size during s_fmt().

Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Mansur Alisha Shaik
799926a123 media: venus: helper: change log level for false warning message
In current video driver implementation in calculate_inst_freq()
frequency is calculated based on filled_len. The filled_len may
vary frame to frame, because of this in load_scale_v4() since
frequency is calculated for all instances, driver is throwing
false warning like "HW is overloaded".

Hence to handle this, changed log level to low log message. Since the
actual session rejection is happening in decide_core() based on
load.

Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Arnd Bergmann
92b7b90c90 media: omap_vout: use dma_addr_t consistently
gcc notices that the driver mixes 'dma_addr_t' 'u8 *' and 'u32'
to store DMA addresses:

drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_vb2_prepare':
drivers/media/platform/omap/omap_vout.c:979:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
  vout->queued_buf_addr[vb->index] = (u8 *)buf_phy_addr;
                                     ^
drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_create_video_devices':
drivers/media/platform/omap/omap_vout.c:1479:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
   vout->fbuf.base = (void *)info.paddr;

Use dma_addr_t everywhere here to avoid the type conversions and document
what the address is used for. Assigning to vout->fbuf.base still requires
a cast, since that is part of the driver independent data structure.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Kieran Bingham
8888a2ff63 media: vsp1: Add support for the V3U VSPD
The V3U provides two VSPD instances, with a new update to the version
register to detect the new SoC.

Add the new version and model detection, and detail the features
available in this module.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Kieran Bingham
168c05a3e6 media: vsp1: Simplify DRM UIF handling
In commit 6732f31393 ("media: v4l: vsp1: Fix uif null pointer access")
the handling of the UIF was over complicated, and the patch applied
before review.

Simplify it to keep the conditionals small.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Kieran Bingham
e73396fee2 media: vsp1: Fix WPF macro names
The WPF IRQ enable and status macros have been incorrectly named WFP.
Fix them accordingly, and update all uses of the macros.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Mirela Rabulea
ae3cab78dc media: imx-jpeg: Remove soft reset between frames encoding
Remove soft reset between frames, which was merely a workaround,
actually replace it with something less aggressive: clearing of jpeg stream
buffer pointer, via STM_CTRL[BITBUF_PTR_CLR].
According to the reference manual, the BITBUF_PTR_CLR is performed on
context switch, but, per hardware team recommendation, it is also working
without context switch, which is the case for this driver, for now.

Without soft reset and without BITBUF_PTR_CLR, successive encoding jobs
continue from where the previous left off, basically writing past the
v4l2 buffer.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Mirela Rabulea
34acaf65dc media: imx-jpeg: Fix occasional decoder fail on jpegs without DHT
Add some body to the dummy jpeg used to inject a default DHT.
Use jpeg_image_red as compressed image data, insert it at the
end of SOS, before EOI.

The pure dummy jpeg was occasionally not working well on
8qxp C0.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Mirela Rabulea
83f5f0633b media: imx-jpeg: Fix possible null pointer dereference
Found by Coverity scan.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08 11:26:13 +02:00
Borislav Petkov
d298b03506 x86/fpu: Restore the masking out of reserved MXCSR bits
Ser Olmy reported a boot failure:

  init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \
	  in libc-2.33.so[b7bed000+156000]
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  CPU: 0 PID: 1 Comm: init Tainted: G        W         5.14.9 #1
  Hardware name: Hewlett-Packard HP PC/HP Board, BIOS  JD.00.06 12/06/2001
  Call Trace:
   dump_stack_lvl
   dump_stack
   panic
   do_exit.cold
   do_group_exit
   get_signal
   arch_do_signal_or_restart
   ? force_sig_info_to_task
   ? force_sig
   exit_to_user_mode_prepare
   syscall_exit_to_user_mode
   do_int80_syscall_32
   entry_INT80_32

on an old 32-bit Intel CPU:

  vendor_id       : GenuineIntel
  cpu family      : 6
  model           : 6
  model name      : Celeron (Mendocino)
  stepping        : 5
  microcode       : 0x3

Ser bisected the problem to the commit in Fixes.

tglx suggested reverting the rejection of invalid MXCSR values which
this commit introduced and replacing it with what the old code did -
simply masking them out to zero.

Further debugging confirmed his suggestion:

  fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf
  WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540

so restore the original behavior only for 32-bit kernels where you have
ancient machines with buggy hardware. For 32-bit programs on 64-bit
kernels, user space which supplies wrong MXCSR values is considered
malicious so fail the sigframe restoration there.

Fixes: 6f9866a166 ("x86/fpu/signal: Let xrstor handle the features to init")
Reported-by: Ser Olmy <ser.olmy@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ser Olmy <ser.olmy@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YVtA67jImg3KlBTw@zn.tnic
2021-10-08 11:12:17 +02:00
Marek Vasut
24417d5b0c
drm/bridge: ti-sn65dsi83: Implement .detach callback
Move detach implementation from sn65dsi83_remove() to dedicated
.detach callback. There is no functional change to the code, but
that detach is now in the correct location.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907024038.871299-1-marex@denx.de
2021-10-08 11:00:37 +02:00
Sibi Sankar
e37f1fe433 iommu/arm-smmu-qcom: Request direct mapping for modem device
The SID configuration requirement for Modem on SC7280 is similar to the
ones found on SC7180/SDM845 SoCs. So, add the SC7280 modem compatible to
the list to defer the programming of the modem SIDs to the kernel.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1631886935-14691-5-git-send-email-sibis@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
2021-10-08 09:07:44 +01:00
Alison Schofield
91a45b12d4 cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS
When an ACPI0016 Host Bridge device is present yet no corresponding
CEDT Host Bridge Structure (CHBS) exists, the ACPI probe method
fails.

Rather than fail, emit this warning and continue:
cxl_acpi ACPI0017:00: No CHBS found for Host Bridge: ACPI0016:02

This error may occur on systems that are not compliant with the
ACPI specification. Compliant systems include a CHBS entry for
every CXL host bridge that is present at boot.

Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211007213426.392644-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-10-08 01:05:31 -07:00
YueHaibing
27ff8187f1 opp: Fix return in _opp_add_static_v2()
Fix sparse warning:
drivers/opp/of.c:924 _opp_add_static_v2() warn: passing zero to 'ERR_PTR'

For duplicate OPPs 'ret' be set to zero.

Fixes: deac8703da ("PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-08 13:24:46 +05:30
Dave Marchevsky
dd65acf72d selftests/bpf: Remove SEC("version") from test progs
Since commit 6c4fc209fc ("bpf: remove useless version check for prog
load") these "version" sections, which result in bpf_attr.kern_version
being set, have been unnecessary.

Remove them so that it's obvious to folks using selftests as a guide that
"modern" BPF progs don't need this section.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007231234.2223081-1-davemarchevsky@fb.com
2021-10-07 22:01:56 -07:00
Song Liu
aa67fdb464 selftests/bpf: Skip the second half of get_branch_snapshot in vm
VMs running on upstream 5.12+ kernel support LBR. However,
bpf_get_branch_snapshot couldn't stop the LBR before too many entries
are flushed. Skip the hit/waste test for VMs before we find a proper fix
for LBR in VM.

Fixes: 025bd7c753 ("selftests/bpf: Add test for bpf_get_branch_snapshot")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007050231.728496-1-songliubraving@fb.com
2021-10-07 21:51:04 -07:00