Commit graph

1,089,026 commits

Author SHA1 Message Date
Pierre-Louis Bossart
1539c8c5fc
ASoC: SOF: core: debug: force all processing on primary core
The topology file currently provides information on which
pipeline/processing is to be scheduled on which DSP core.

To help diagnose potential issues, this patch provides an override of
the 'core' tokens to use the primary core (typically core0). Of course
this may result in a Core0 activity that exceeds hardware
capabilities, so this should only be used when the total processing
fits on DSP - possibly using firmware mockup processing and stubs.

No new dmesg log was added to avoid adding noise during topology
parsing, but the existing logs will show the primary core being used.

This is strictly for validation/debug, products should NEVER use this
override, the topology is assumed to be the description of the
firmware graph.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:21 +01:00
Alejandro Tafalla
b23d3189c0
ASoC: max98927: Add reset-gpios optional property
Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com>
Link: https://lore.kernel.org/r/5004d52da527bf1dd9e5b17e20b2ce50a0b57b5a.1633572679.git.atafalla@dnyon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:20 +01:00
Alejandro Tafalla
4d67dc1998
ASoC: max98927: Handle reset gpio when probing i2c
The max98927 codec on some devices requires pulling a reset gpio before
responding to any i2c command. This commit adds support for it through
an optional reset-gpios property.

Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com>
Link: https://lore.kernel.org/r/d74b12a79ae9ca728d5d9e64c55b3e59e8c0e509.1633572679.git.atafalla@dnyon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:18 +01:00
Srinivasa Rao Mandadapu
214174d9f5
ASoC: codec: wcd938x: Add irq config support
This patch fixes compilation error in wcd98x codec driver.

Fixes: 0454422288 ("ASoC: codecs: wcd938x: add audio routing and Kconfig")

Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1633614675-27122-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:14 +01:00
Takashi Iwai
5af82c81b2
ASoC: DAPM: Fix missing kctl change notifications
The put callback of a kcontrol is supposed to return 1 when the value
is changed, and this will be notified to user-space.  However, some
DAPM kcontrols always return 0 (except for errors), hence the
user-space misses the update of a control value.

This patch corrects the behavior by properly returning 1 when the
value gets updated.

Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211006141712.2439-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:12 +01:00
Andy Shevchenko
c25d4546ca
ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation
dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211006150428.16434-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:11 +01:00
Andy Shevchenko
10f4a96543
ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional()
First of all, replace indexed API by plain one since we have index 0.
Second, switch to optional variant and drop duplicated code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211006150428.16434-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:10 +01:00
Andy Shevchenko
6f32c52106
ASoC: Intel: bytcht_es8316: Use temporary variable for struct device
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211006150428.16434-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:09 +01:00
Andy Shevchenko
2577b868a4
ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata()
Access to platform data via dev_get_platdata() getter to make code cleaner.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.com>
Link: https://lore.kernel.org/r/20211006150428.16434-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:08 +01:00
Srinivasa Rao Mandadapu
db0767b8a6
ASoC: wcd938x: Fix jack detection issue
This patch is to fix audio 3.5mm jack detection failure
on wcd938x codec based target.

Fixes: bcee7ed09b (ASoC: codecs: wcd938x: add Multi Button Headset Control support)

Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1633614619-27026-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-07 15:45:07 +01:00
Mike Manning
8d6c414cd2 net: prefer socket bound to interface when not in VRF
The commit 6da5b0f027 ("net: ensure unbound datagram socket to be
chosen when not in a VRF") modified compute_score() so that a device
match is always made, not just in the case of an l3mdev skb, then
increments the score also for unbound sockets. This ensures that
sockets bound to an l3mdev are never selected when not in a VRF.
But as unbound and bound sockets are now scored equally, this results
in the last opened socket being selected if there are matches in the
default VRF for an unbound socket and a socket bound to a dev that is
not an l3mdev. However, handling prior to this commit was to always
select the bound socket in this case. Reinstate this handling by
incrementing the score only for bound sockets. The required isolation
due to choosing between an unbound socket and a socket bound to an
l3mdev remains in place due to the device match always being made.
The same approach is taken for compute_score() for stream sockets.

Fixes: 6da5b0f027 ("net: ensure unbound datagram socket to be chosen when not in a VRF")
Fixes: e78190581a ("net: ensure unbound stream socket to be chosen when not in a VRF")
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cf0a8523-b362-1edf-ee78-eef63cbbb428@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07 07:27:55 -07:00
Johan Hovold
d02b006b29 Revert "serial: 8250: Fix reporting real baudrate value in c_ospeed field"
This reverts commit 32262e2e42.

The commit in question claims to determine the inverse of
serial8250_get_divisor() but failed to notice that some drivers override
the default implementation using a get_divisor() callback.

This means that the computed line-speed values can be completely wrong
and results in regular TCSETS requests failing (the incorrect values
would also be passed to any overridden set_divisor() callback).

Similarly, it also failed to honour the old (deprecated) ASYNC_SPD_FLAGS
and would break applications relying on those when re-encoding the
actual line speed.

There are also at least two quirks, UART_BUG_QUOT and an OMAP1510
workaround, which were happily ignored and that are now broken.

Finally, even if the offending commit were to be implemented correctly,
this is a new feature and not something which should be backported to
stable.

Cc: Pali Rohár <pali@kernel.org>
Fixes: 32262e2e42 ("serial: 8250: Fix reporting real baudrate value in c_ospeed field")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211007133146.28949-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-07 16:22:29 +02:00
Jakub Kicinski
7671b026bb Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-10-07

We've added 7 non-merge commits during the last 8 day(s) which contain
a total of 8 files changed, 38 insertions(+), 21 deletions(-).

The main changes are:

1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal
   helper call, from Johan Almbladh.

2) Fix integer overflow in BPF stack map element size calculation when
   used with preallocation, from Tatsuhiko Yasumatsu.

3) Fix an AF_UNIX regression due to added BPF sockmap support related
   to shutdown handling, from Jiang Wang.

4) Fix a segfault in libbpf when generating light skeletons from objects
   without BTF, from Kumar Kartikeya Dwivedi.

5) Fix a libbpf memory leak in strset to free the actual struct strset
   itself, from Andrii Nakryiko.

6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool,
   with ACKs from all contributors, from Luca Boccassi.
====================

Link: https://lore.kernel.org/r/20211007135010.21143-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07 07:11:33 -07:00
Steven Rostedt (VMware)
b30a779d5c tracing: Initialize upper and lower vars in pid_list_refill_irq()
The upper and lower variables are set as link lists to add into the sparse
array. If they are NULL, after the needed allocations are done, then there
is nothing to add. But they need to be initialized to NULL for this to
work.

Link: https://lore.kernel.org/all/221bc7ba-a475-1cb9-1bbe-730bb9c2d448@canonical.com/

Fixes: 8d6e90983a ("tracing: Create a sparse bitmask for pid filtering")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-07 09:56:38 -04:00
Jackie Liu
424b650f35 tracing: Fix missing osnoise tracer on max_latency
The compiler warns when the data are actually unused:

  kernel/trace/trace.c:1712:13: error: ‘trace_create_maxlat_file’ defined but not used [-Werror=unused-function]
   1712 | static void trace_create_maxlat_file(struct trace_array *tr,
        |             ^~~~~~~~~~~~~~~~~~~~~~~~

[Why]
CONFIG_HWLAT_TRACER=n, CONFIG_TRACER_MAX_TRACE=n, CONFIG_OSNOISE_TRACER=y
gcc report warns.

[How]
Now trace_create_maxlat_file will only take effect when
CONFIG_HWLAT_TRACER=y or CONFIG_TRACER_MAX_TRACE=y. In fact, after
adding osnoise trace, it also needs to take effect.

Link: https://lore.kernel.org/all/c1d9e328-ad7c-920b-6c24-9e1598a6421c@infradead.org/
Link: https://lkml.kernel.org/r/20210922025122.3268022-1-liu.yun@linux.dev

Fixes: bce29ac9ce ("trace: Add osnoise tracer")
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-07 09:41:47 -04:00
Daniel Lezcano
fc656fa14d thermal/drivers/netlink: Add the temperature when crossing a trip point
The slope of the temperature increase or decrease can be high and when
the temperature crosses the trip point, there could be a significant
difference between the trip temperature and the measured temperatures.

That forces the userspace to read the temperature back right after
receiving a trip violation notification.

In order to be efficient, give the temperature which resulted in the
trip violation.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20211001223323.1836640-1-daniel.lezcano@linaro.org
2021-10-07 15:41:38 +02:00
Aleksander Morgado
11c52d250b USB: serial: qcserial: add EM9191 QDL support
When the module boots into QDL download mode it exposes the 1199:90d2
ids, which can be mapped to the qcserial driver, and used to run
firmware upgrades (e.g. with the qmi-firmware-update program).

  T:  Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
  D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1199 ProdID=90d2 Rev=00.00
  S:  Manufacturer=Sierra Wireless, Incorporated
  S:  Product=Sierra Wireless EM9191
  S:  SerialNumber=8W0382004102A109
  C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-10-07 15:39:06 +02:00
Pali Rohár
2b650b7ff2 PCI: aardvark: Fix reporting Data Link Layer Link Active
Add support for reporting PCI_EXP_LNKSTA_DLLLA bit in Link Control register
on emulated bridge via current LTSSM state. Also correctly indicate DLLLA
capability via PCI_EXP_LNKCAP_DLLLARC bit in Link Control Capability
register.

Link: https://lore.kernel.org/r/20211005180952.6812-14-kabel@kernel.org
Fixes: 8a3ebd8de3 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
2021-10-07 14:27:59 +01:00
Pali Rohár
661c399a65 PCI: aardvark: Fix checking for link up via LTSSM state
Current implementation of advk_pcie_link_up() is wrong as it marks also
link disabled or hot reset states as link up.

Fix it by marking link up only to those states which are defined in PCIe
Base specification 3.0, Table 4-14: Link Status Mapped to the LTSSM.

To simplify implementation, Define macros for every LTSSM state which
aardvark hardware can return in CFG_REG register.

Fix also checking for link training according to the same Table 4-14.
Define a new function advk_pcie_link_training() for this purpose.

Link: https://lore.kernel.org/r/20211005180952.6812-13-kabel@kernel.org
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Cc: Remi Pommarel <repk@triplefau.lt>
2021-10-07 14:27:59 +01:00
Pali Rohár
f76b36d40b PCI: aardvark: Fix link training
Fix multiple link training issues in aardvark driver. The main reason of
these issues was misunderstanding of what certain registers do, since their
names and comments were misleading: before commit 96be36dbff ("PCI:
aardvark: Replace custom macros by standard linux/pci_regs.h macros"), the
pci-aardvark.c driver used custom macros for accessing standard PCIe Root
Bridge registers, and misleading comments did not help to understand what
the code was really doing.

After doing more tests and experiments I've come to the conclusion that the
SPEED_GEN register in aardvark sets the PCIe revision / generation
compliance and forces maximal link speed. Both GEN3 and GEN2 values set the
read-only PCI_EXP_FLAGS_VERS bits (PCIe capabilities version of Root
Bridge) to value 2, while GEN1 value sets PCI_EXP_FLAGS_VERS to 1, which
matches with PCI Express specifications revisions 3, 2 and 1 respectively.
Changing SPEED_GEN also sets the read-only bits PCI_EXP_LNKCAP_SLS and
PCI_EXP_LNKCAP2_SLS to corresponding speed.

(Note that PCI Express rev 1 specification does not define PCI_EXP_LNKCAP2
 and PCI_EXP_LNKCTL2 registers and when SPEED_GEN is set to GEN1 (which
 also sets PCI_EXP_FLAGS_VERS set to 1), lspci cannot access
 PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers.)

Changing PCIe link speed can be done via PCI_EXP_LNKCTL2_TLS bits of
PCI_EXP_LNKCTL2 register. Armada 3700 Functional Specifications says that
the default value of PCI_EXP_LNKCTL2_TLS is based on SPEED_GEN value, but
tests showed that the default value is always 8.0 GT/s, independently of
speed set by SPEED_GEN. So after setting SPEED_GEN, we must also set value
in PCI_EXP_LNKCTL2 register via PCI_EXP_LNKCTL2_TLS bits.

Triggering PCI_EXP_LNKCTL_RL bit immediately after setting LINK_TRAINING_EN
bit actually doesn't do anything. Tests have shown that a delay is needed
after enabling LINK_TRAINING_EN bit. As triggering PCI_EXP_LNKCTL_RL
currently does nothing, remove it.

Commit 43fc679ced ("PCI: aardvark: Improve link training") introduced
code which sets SPEED_GEN register based on negotiated link speed from
PCI_EXP_LNKSTA_CLS bits of PCI_EXP_LNKSTA register. This code was added to
fix detection of Compex WLE900VX (Atheros QCA9880) WiFi GEN1 PCIe cards, as
otherwise these cards were "invisible" on PCIe bus (probably because they
crashed). But apparently more people reported the same issues with these
cards also with other PCIe controllers [1] and I was able to reproduce this
issue also with other "noname" WiFi cards based on Atheros QCA9890 chip
(with the same PCI vendor/device ids as Atheros QCA9880). So this is not an
issue in aardvark but rather an issue in Atheros QCA98xx chips. Also, this
issue only exists if the kernel is compiled with PCIe ASPM support, and a
generic workaround for this is to change PCIe Bridge to 2.5 GT/s link speed
via PCI_EXP_LNKCTL2_TLS_2_5GT bits in PCI_EXP_LNKCTL2 register [2], before
triggering PCI_EXP_LNKCTL_RL bit. This workaround also works when SPEED_GEN
is set to value GEN2 (5 GT/s). So remove this hack completely in the
aardvark driver and always set SPEED_GEN to value from 'max-link-speed' DT
property. Fix for Atheros QCA98xx chips is handled separately by patch [2].

These two things (code for triggering PCI_EXP_LNKCTL_RL bit and changing
SPEED_GEN value) also explain why commit 6964494582 ("PCI: aardvark:
Train link immediately after enabling training") somehow fixed detection of
those problematic Compex cards with Atheros chips: if triggering link
retraining (via PCI_EXP_LNKCTL_RL bit) was done immediately after enabling
link training (via LINK_TRAINING_EN), it did nothing. If there was a
specific delay, aardvark HW already initialized PCIe link and therefore
triggering link retraining caused the above issue. Compex cards triggered
link down event and disappeared from the PCIe bus.

Commit f4c7d053d7 ("PCI: aardvark: Wait for endpoint to be ready before
training link") added 100ms sleep before calling 'Start link training'
command and explained that it is a requirement of PCI Express
specification. But the code after this 100ms sleep was not doing 'Start
link training', rather it triggered PCI_EXP_LNKCTL_RL bit via PCIe Root
Bridge to put link into Recovery state.

The required delay after fundamental reset is already done in function
advk_pcie_wait_for_link() which also checks whether PCIe link is up.
So after removing the code which triggers PCI_EXP_LNKCTL_RL bit on PCIe
Root Bridge, there is no need to wait 100ms again. Remove the extra
msleep() call and update comment about the delay required by the PCI
Express specification.

According to Marvell Armada 3700 Functional Specifications, Link training
should be enabled via aardvark register LINK_TRAINING_EN after selecting
PCIe generation and x1 lane. There is no need to disable it prior resetting
card via PERST# signal. This disabling code was introduced in commit
5169a9851d ("PCI: aardvark: Issue PERST via GPIO") as a workaround for
some Atheros cards. It turns out that this also is Atheros specific issue
and affects any PCIe controller, not only aardvark. Moreover this Atheros
issue was triggered by juggling with PCI_EXP_LNKCTL_RL, LINK_TRAINING_EN
and SPEED_GEN bits interleaved with sleeps. Now, after removing triggering
PCI_EXP_LNKCTL_RL, there is no need to explicitly disable LINK_TRAINING_EN
bit. So remove this code too. The problematic Compex cards described in
previous git commits are correctly detected in advk_pcie_train_link()
function even after applying all these changes.

Note that with this patch, and also prior this patch, some NVMe disks which
support PCIe GEN3 with 8 GT/s speed are negotiated only at the lowest link
speed 2.5 GT/s, independently of SPEED_GEN value. After manually triggering
PCI_EXP_LNKCTL_RL bit (e.g. from userspace via setpci), these NVMe disks
change link speed to 5 GT/s when SPEED_GEN was configured to GEN2. This
issue first needs to be properly investigated. I will send a fix in the
future.

On the other hand, some other GEN2 PCIe cards with 5 GT/s speed are
autonomously by HW autonegotiated at full 5 GT/s speed without need of any
software interaction.

Armada 3700 Functional Specifications describes the following steps for
link training: set SPEED_GEN to GEN2, enable LINK_TRAINING_EN, poll until
link training is complete, trigger PCI_EXP_LNKCTL_RL, poll until signal
rate is 5 GT/s, poll until link training is complete, enable ASPM L0s.

The requirement for triggering PCI_EXP_LNKCTL_RL can be explained by the
need to achieve 5 GT/s speed (as changing link speed is done by throw to
recovery state entered by PCI_EXP_LNKCTL_RL) or maybe as a part of enabling
ASPM L0s (but in this case ASPM L0s should have been enabled prior
PCI_EXP_LNKCTL_RL).

It is unknown why the original pci-aardvark.c driver was triggering
PCI_EXP_LNKCTL_RL bit before waiting for the link to be up. This does not
align with neither PCIe base specifications nor with Armada 3700 Functional
Specification. (Note that in older versions of aardvark, this bit was
called incorrectly PCIE_CORE_LINK_TRAINING, so this may be the reason.)

It is also unknown why Armada 3700 Functional Specification says that it is
needed to trigger PCI_EXP_LNKCTL_RL for GEN2 mode, as according to PCIe
base specification 5 GT/s speed negotiation is supposed to be entirely
autonomous, even if initial speed is 2.5 GT/s.

[1] - https://lore.kernel.org/linux-pci/87h7l8axqp.fsf@toke.dk/
[2] - https://lore.kernel.org/linux-pci/20210326124326.21163-1-pali@kernel.org/

Link: https://lore.kernel.org/r/20211005180952.6812-12-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
2021-10-07 14:27:59 +01:00
Pali Rohár
454c53271f PCI: aardvark: Simplify initialization of rootcap on virtual bridge
PCIe config space can be initialized also before pci_bridge_emul_init()
call, so move rootcap initialization after PCI config space initialization.

This simplifies the function a little since it removes one if (ret < 0)
check.

Link: https://lore.kernel.org/r/20211005180952.6812-11-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
2021-10-07 14:27:59 +01:00
Pali Rohár
223dec14a0 PCI: aardvark: Implement re-issuing config requests on CRS response
Commit 43f5c77bcb ("PCI: aardvark: Fix reporting CRS value") fixed
handling of CRS response and when CRSSVE flag was not enabled it marked CRS
response as failed transaction (due to simplicity).

But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count
for PIO config response and so we can with a small change implement
re-issuing of config requests as described in PCIe base specification.

This change implements re-issuing of config requests when response is CRS.
Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the
transaction is marked as failed and an all-ones value is returned as
before.

We do this by returning appropriate error codes from function
advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then
reissues transaction.

Link: https://lore.kernel.org/r/20211005180952.6812-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
2021-10-07 14:27:59 +01:00
Marek Behún
67cb2a4c93 PCI: aardvark: Deduplicate code in advk_pcie_rd_conf()
Avoid code repetition in advk_pcie_rd_conf() by handling errors with
goto jump, as is customary in kernel.

Link: https://lore.kernel.org/r/20211005180952.6812-9-kabel@kernel.org
Fixes: 43f5c77bcb ("PCI: aardvark: Fix reporting CRS value")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-10-07 14:27:58 +01:00
Pali Rohár
1fb95d7d3c PCI: aardvark: Do not unmask unused interrupts
There are lot of undocumented interrupt bits. To prevent unwanted
spurious interrupts, fix all *_ALL_MASK macros to define all interrupt
bits, so that driver can properly mask all interrupts, including those
which are undocumented.

Link: https://lore.kernel.org/r/20211005180952.6812-8-kabel@kernel.org
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
2021-10-07 14:24:47 +01:00
Pali Rohár
a7ca6d7fa3 PCI: aardvark: Do not clear status bits of masked interrupts
The PCIE_ISR1_REG says which interrupts are currently set / active,
including those which are masked.

The driver currently reads this register and looks if some unmasked
interrupts are active, and if not, it clears status bits of _all_
interrupts, including the masked ones.

This is incorrect, since, for example, some drivers may poll these bits.

Remove this clearing, and also remove this early return statement
completely, since it does not change functionality in any way.

Link: https://lore.kernel.org/r/20211005180952.6812-7-kabel@kernel.org
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
2021-10-07 14:23:32 +01:00
Pali Rohár
46ef6090db PCI: aardvark: Fix configuring Reference clock
Commit 366697018c ("PCI: aardvark: Add PHY support") introduced
configuration of PCIe Reference clock via PCIE_CORE_REF_CLK_REG register,
but did it incorrectly.

PCIe Reference clock differential pair is routed from system board to
endpoint card, so on CPU side it has output direction. Therefore it is
required to enable transmitting and disable receiving.

Default configuration according to Armada 3700 Functional Specifications is
enabled receiver part and disabled transmitter.

We need this change because otherwise PCIe Reference clock is configured to
some undefined state when differential pair is used for both transmitting
and receiving.

Fix this by disabling receiver part.

Link: https://lore.kernel.org/r/20211005180952.6812-6-kabel@kernel.org
Fixes: 366697018c ("PCI: aardvark: Add PHY support")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
2021-10-07 14:23:31 +01:00
Pali Rohár
d419052bc6 PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge
Commit 43f5c77bcb ("PCI: aardvark: Fix reporting CRS value") started
using CRSSVE flag for handling CRS responses.

PCI_EXP_RTCTL_CRSSVE flag is stored only in emulated config space buffer
and there is handler for PCI_EXP_RTCTL register. So every read operation
from config space automatically clears CRSSVE flag as it is not defined in
PCI_EXP_RTCTL read handler.

Fix this by reading current CRSSVE bit flag from emulated space buffer and
appending it to PCI_EXP_RTCTL read response.

Link: https://lore.kernel.org/r/20211005180952.6812-5-kabel@kernel.org
Fixes: 43f5c77bcb ("PCI: aardvark: Fix reporting CRS value")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
2021-10-07 14:23:31 +01:00
Marek Behún
464de7e7ff PCI: aardvark: Don't spam about PIO Response Status
Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status().

For example CRS is not an error status, it just says that the request
should be retried.

Link: https://lore.kernel.org/r/20211005180952.6812-4-kabel@kernel.org
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-10-07 14:23:31 +01:00
Pali Rohár
a4e17d65da PCI: aardvark: Fix PCIe Max Payload Size setting
Change PCIe Max Payload Size setting in PCIe Device Control register to 512
bytes to align with PCIe Link Initialization sequence as defined in Marvell
Armada 3700 Functional Specification. According to the specification,
maximal Max Payload Size supported by this device is 512 bytes.

Without this kernel prints suspicious line:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)

With this change it changes to:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)

Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
2021-10-07 14:23:31 +01:00
Pali Rohár
460275f124 PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload
Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*.

Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-07 14:23:31 +01:00
Rikard Falkeborn
69c560d2eb thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops
The only usage of thermal_mmio_ops is to pass its address to
devm_thermal_zone_of_sensor_register(), which has a pointer to const
struct thermal_zone_of_device_ops as argument. Make it const to allow
the compiler to put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210920203849.32136-1-rikard.falkeborn@gmail.com
2021-10-07 15:18:31 +02:00
Zenghui Yu
2da25852c3
arm64: defconfig: drop obsolete ARCH_* configs
Per commit 4a9a1a5602 ("arm64: socfpga: merge Agilex and N5X into
ARCH_INTEL_SOCFPGA") and commit 89d4f98ae9 ("ARM: remove zte zx
platform"), they can be dropped from defconfig now.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-07 15:13:48 +02:00
Christian König
7cd80132ae drm: use new iterator in drm_gem_fence_array_add_implicit v3
Simplifying the code a bit.

v2: add missing rcu_read_lock()/unlock()
v3: switch to locked version

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-24-christian.koenig@amd.com
2021-10-07 14:49:11 +02:00
Christian König
a585070f26 drm/i915: use the new iterator in i915_request_await_object v2
Simplifying the code a bit.

v2: add missing rcu_read_lock()/rcu_read_unlock()
v3: use dma_resv_for_each_fence instead

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-20-christian.koenig@amd.com
2021-10-07 14:49:11 +02:00
Christian König
9c2ba26535 drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2
Simplifying the code a bit.

v2: use dma_resv_for_each_fence

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-17-christian.koenig@amd.com
2021-10-07 14:49:11 +02:00
Christian König
dbcae3bfcb drm/ttm: use the new iterator in ttm_bo_flush_all_fences
This is probably a fix since we didn't even grabed a reference to the
fences.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-11-christian.koenig@amd.com
2021-10-07 14:49:11 +02:00
Christian König
0a42016d93 dma-buf: use the new iterator in dma_resv_poll
Simplify the code a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-10-christian.koenig@amd.com
2021-10-07 14:49:11 +02:00
Christian König
63639d013a dma-buf: use the new iterator in dma_buf_debug_show
Simplifying the code a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-9-christian.koenig@amd.com
2021-10-07 14:49:11 +02:00
Christian König
5baaac3184 dma-buf: add dma_resv_for_each_fence v3
A simpler version of the iterator to be used when the dma_resv object is
locked.

v2: fix index check here as well
v3: minor coding improvement, some documentation cleanup

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006123609.2026-1-christian.koenig@amd.com
2021-10-07 14:49:11 +02:00
David S. Miller
44cc24b04b wireless-drivers-next patches for v5.16
First set of patches for v5.16. ath11k getting most of new features
 this time. Other drivers also have few new features, and of course the
 usual set of fixes and cleanups all over.
 
 Major changes:
 
 rtw88
 
 * support adaptivity for ETSI/JP DFS region
 
 * 8821c: support RFE type4 wifi NIC
 
 brcmfmac
 
 * DMI nvram filename quirk for Cyberbook T116 tablet
 
 ath9k
 
 * load calibration data and pci init values via nvmem subsystem
 
 ath11k
 
 * include channel rx and tx time in survey dump statistics
 
 * support for setting fixed Wi-Fi 6 rates from user space
 
 * support for 80P80 and 160 MHz bandwidths
 
 * spectral scan support for QCN9074
 
 * support for calibration data files per radio
 
 * support for calibration data via eeprom
 
 * support for rx decapsulation offload (data frames in 802.3 format)
 
 * support channel 2 in 6 GHz band
 
 ath10k
 
 * include frame time stamp in beacon and probe response frames
 
 wcn36xx
 
 * enable Idle Mode Power Save (IMPS) to reduce power consumption during idle
 -----BEGIN PGP SIGNATURE-----
 
 iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmFeqCYVHGt2YWxvQGNv
 ZGVhdXJvcmEub3JnAAoJEG4XJFUm622b1+QIAKeCfq25i6ObhdgKP7etAHyaOupP
 0wKxXwuOMLllwUSDp/1vyONqMgNbpurXlGzqcwG2fRyljZouuuzAM/WUxtSETVEC
 TaXYhoX7+u0DuVZ+QvREL0fK+jBB2qbpRpAneNPQ+nvjND5dVm233NwZ4oG65Z4f
 qQC21WeP6rfi870Bj5ycmGIWbb+OVT0B7FHfNzy5tSkcCFmlKZBfP7p6raUyy6/Z
 0EBosxEd5FWjAHbWHXLGtXb+k/48ntcFyCswa9qMBjVawahgNfXGG1JwceHFMRvE
 fwNMweWj4M5QVs7jBZoQaxijBXUPjJdp/2adybgIpgQp50FmlC8uyRSe9YQ=
 =yAni
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.16

First set of patches for v5.16. ath11k getting most of new features
this time. Other drivers also have few new features, and of course the
usual set of fixes and cleanups all over.

Major changes:

rtw88

* support adaptivity for ETSI/JP DFS region

* 8821c: support RFE type4 wifi NIC

brcmfmac

* DMI nvram filename quirk for Cyberbook T116 tablet

ath9k

* load calibration data and pci init values via nvmem subsystem

ath11k

* include channel rx and tx time in survey dump statistics

* support for setting fixed Wi-Fi 6 rates from user space

* support for 80P80 and 160 MHz bandwidths

* spectral scan support for QCN9074

* support for calibration data files per radio

* support for calibration data via eeprom

* support for rx decapsulation offload (data frames in 802.3 format)

* support channel 2 in 6 GHz band

ath10k

* include frame time stamp in beacon and probe response frames

wcn36xx

* enable Idle Mode Power Save (IMPS) to reduce power consumption during idle
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:42:40 +01:00
David S. Miller
5a98dcf59a Merge branch 'dev_addr-fw-helpers'
Jakub Kicinski says:

====================
net: add a helpers for loading netdev->dev_addr from FW

We're trying to make all writes to netdev->dev_addr go via helpers.
A lot of places pass netdev->dev_addr to of_get_ethdev_address() and
device_get_ethdev_addr() so this set adds new functions which wrap
the functionality.

v2 performs suggested code moves, adds a couple additional clean ups
on the device property side, and an extra patch converting drivers
which can benefit from device_get_ethdev_address().

v3 removes OF_NET and corrects kdoc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:52 +01:00
Jakub Kicinski
894b0fb092 ethernet: make more use of device_get_ethdev_address()
Convert a few drivers to device_get_ethdev_address(),
saving a few LoC.

The check if addr is valid in netsec is superfluous,
device_get_ethdev_addr() already checks that (in
fwnode_get_mac_addr()).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
b8eeac565b ethernet: use device_get_ethdev_address()
Use the new device_get_ethdev_address() helper for the cases
where dev->dev_addr is passed in directly as the destination.

  @@
  expression dev, np;
  @@
  - device_get_mac_address(np, dev->dev_addr, ETH_ALEN)
  + device_get_ethdev_address(np, dev)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
d9eb44904e eth: fwnode: add a helper for loading netdev->dev_addr
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

There is a handful of drivers which pass netdev->dev_addr as
the destination buffer to device_get_mac_address(). Add a helper
which takes a dev pointer instead, so it can call an appropriate
helper.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
0a14501ed8 eth: fwnode: remove the addr len from mac helpers
All callers pass in ETH_ALEN and the function itself
will return -EINVAL for any other address length.
Just assume it's ETH_ALEN like all other mac address
helpers (nvm, of, platform).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
8017c4d817 eth: fwnode: change the return type of mac address helpers
fwnode_get_mac_address() and device_get_mac_address()
return a pointer to the buffer that was passed to them
on success or NULL on failure. None of the callers
care about the actual value, only if it's NULL or not.

These semantics differ from of_get_mac_address() which
returns an int so to avoid confusion make the device
helpers return an errno.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
433baf0719 device property: move mac addr helpers to eth.c
Move the mac address helpers out, eth.c already contains
a bunch of similar helpers.

Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
9ca01b25df ethernet: use of_get_ethdev_address()
Use the new of_get_ethdev_address() helper for the cases
where dev->dev_addr is passed in directly as the destination.

  @@
  expression dev, np;
  @@
  - of_get_mac_address(np, dev->dev_addr)
  + of_get_ethdev_address(np, dev)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
d466effe28 of: net: add a helper for loading netdev->dev_addr
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

There are roughly 40 places where netdev->dev_addr is passed
as the destination to a of_get_mac_address() call. Add a helper
which takes a dev pointer instead, so it can call an appropriate
helper.

Note that of_get_mac_address() already assumes the address is
6 bytes long (ETH_ALEN) so use eth_hw_addr_set().

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00
Jakub Kicinski
e330fb1459 of: net: move of_net under net/
Rob suggests to move of_net.c from under drivers/of/ somewhere
to the networking code.

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07 13:39:51 +01:00