Commit graph

1,089,026 commits

Author SHA1 Message Date
Matthias Schiffer
61b2f7b158 ARM: dts: imx7-tqma7: add SPI-NOR flash
The SPI-NOR flash on the SoM was missing from the device tree.

The TQMa7 as a designated QSPI_RESET# pin, however depending on the
hardware configuration the pin may be unconnected, or be used for a
different purpose. With this in mind, we mux the pin as a pullup and
define an input hog for it, but keep it a separate pin group, so that it
is easy for dependent Device Trees to modify the configuration.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 13:24:05 +08:00
Matthias Schiffer
bac185ef0b ARM: dts: imx7-tqma7/mba7: correct spelling of "TQ-Systems"
"TQ-Systems" is written with a dash.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 13:23:52 +08:00
Krzysztof Kozlowski
03edccceae ARM: dts: imx6dl-b1x5v2: drop unsupported vcc-supply for MPL3115A2
The MPL3115A2 I2C pressure sensor driver does not take a VCC regulator.
The bindings are so far trivial, but the datasheet does not have a VCC
pin.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 13:15:36 +08:00
Palmer Dabbelt
73698660f1 H extension definitions, shared by the KVM and RISC-V trees.
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmFawaIUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroO7xwf9HF/zvySIRhwWsxI6RZKA5k+g0ebe
 18XzPeBMPeW1C5YLukL67cvoxgW8oHc/ZMhdUKVSEkgMkhF7c6uNgtvodtv7ZFk8
 /3wfBAERp37VKltliU2JvVs/8GXboK+uKnq0mIt52CO9+JVH/55URtz7Spxnl8Fc
 Lx7ioeKoaPw2mnyuU6sSNwt7HuUtqn8meQ1EcYLCGND7Vyu/BevRGvqRGuXqipVb
 pDlpz5Cu5T0ZCmBj/ko5PmPCU3COQw2jtiugUvKsAjPM92ViNK8B9O7cbrcEh8fi
 XCOsV1KjzF0kJCvacZMQqkjijL3UriNBRW5JAvd4boV97PGcI9KHZdEFYw==
 =65Mk
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmFb1ygTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYicKuD/9pkpLuebSwmgzDRQ4tcGKQUc+h1rCP
 U++2qb74Zi7XX5JnXwVraAC9F0ps1hOCfQzgncKd6sT/VTrbKqmPl0QF0NMniCjN
 xOk5X4AsZH/qGkgizG8o73Ok9+qclbpyTeYJ5iKBKwwhDOAsutGDsSgp5nrYJYgI
 30xX62eH0XvfyN1Un/qSqE/3TErkwOAlIcFlAr1Nkel0jnOfMzgdUjQEW/h4hxci
 8NWFLVdP1WVdlWSmbCclu1totU884VdPquE0tb6lh6dBQXsAB///AjNHZxsO7jZ0
 UGBG9d4hY40zyvu9FB+kvYyafrZXyhCc+AmphtYBY/cd3TyBXEO98mYPQB/h5Tmh
 wsi1bVIqSAYfw04jJvvtLQYWJybB1el9Mp2jeKg2tEp+j96vvax2FGuHV39lcWXj
 b79M/gd7fAyY+oQhYoFDsLUoY/FYiECvpBQQrgB8AMl+JiNMOp0pWZIGf98paLh+
 3CjX6WCjmxBNrNbM0bj+mmm3dj2Aq8OG98BVsolqqhUah55t7Wu6Hjax7wHgqORk
 FfnuemXLKE4H2AZvMcjaAqBd7/Q1SYRfO+LzcfoE8Nhwek3RaHg3wz5n8c8xT8BW
 9gK8yC/UrdVZNf41nBqKEjYKaholorBP8/qZoNZGxPP87dlLxkFup91D5MtEn+c+
 FNSX5c6BY+8vbQ==
 =ywXC
 -----END PGP SIGNATURE-----

Merge tag 'for-riscv' of https://git.kernel.org/pub/scm/virt/kvm/kvm.git into for-next

H extension definitions, shared by the KVM and RISC-V trees.

* tag 'for-riscv' of ssh://gitolite.kernel.org/pub/scm/virt/kvm/kvm: (301 commits)
  RISC-V: Add hypervisor extension related CSR defines
  KVM: selftests: Ensure all migrations are performed when test is affined
  KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
  ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
  x86/kvmclock: Move this_cpu_pvti into kvmclock.h
  KVM: s390: Function documentation fixes
  selftests: KVM: Don't clobber XMM register when read
  KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
  selftests: KVM: Explicitly use movq to read xmm registers
  selftests: KVM: Call ucall_init when setting up in rseq_test
  KVM: Remove tlbs_dirty
  KVM: X86: Synchronize the shadow pagetable before link it
  KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
  KVM: x86: nSVM: don't copy virt_ext from vmcb12
  KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
  KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
  KVM: x86: nSVM: restore int_vector in svm_clear_vintr
  kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
  KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
  KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
  ...
2021-10-04 21:39:46 -07:00
Dmitry Osipenko
4844bdbe91 PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
EMC clock is always-on and can't be zero. Check whether clk_round_rate()
returns zero rate and error out if it does. It can return zero if clock
tree isn't initialized properly.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-05 09:54:39 +05:30
Dmitry Osipenko
68b79f2855 PM / devfreq: tegra30: Use resource-managed helpers
Use resource-managed API helpers to simplify driver's probe() function,
making code cleaner.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-05 09:54:38 +05:30
Dmitry Osipenko
1cc55204b0 PM / devfreq: Add devm_devfreq_add_governor()
Add resource-managed variant of devfreq_add_governor().

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-05 09:54:38 +05:30
Don Brace
605ae389ea scsi: smartpqi: Update version to 2.1.12-055
Update driver version to reflect changes.

Link: https://lore.kernel.org/r/20210928235442.201875-12-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:16 -04:00
Mike McGowen
80982656b7 scsi: smartpqi: Add 3252-8i PCI id
Add PCI ID information for the Adaptec SmartRAID 3252-8i controller:

    9005 / 028F / 9005 / 14A2

Link: https://lore.kernel.org/r/20210928235442.201875-11-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:16 -04:00
Kevin Barnett
d4dc6aea93 scsi: smartpqi: Fix duplicate device nodes for tape changers
Stop the OS from re-discovering multiple LUNs for tape drive and medium
changer.

Duplicate device nodes for Ultrium tape drive and medium changer are being
created.

The Ultrium tape drive is a multi-LUN SCSI target.  It presents a LUN for
the tape drive and a 2nd LUN for the medium changer.  Our controller FW
lists both LUNs in the RPL results.

As a result, the smartpqi driver exposes both devices to the OS. Then the
OS does its normal device discovery via the SCSI REPORT LUNS command, which
causes it to re-discover both devices a 2nd time, which results in the
duplicate device nodes.

Link: https://lore.kernel.org/r/20210928235442.201875-10-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:15 -04:00
Mike McGowen
987d35605b scsi: smartpqi: Fix boot failure during LUN rebuild
Move the delay in the register polling loop to the beginning of the loop to
ensure there is always a delay between writing the register and reading it.

Link: https://lore.kernel.org/r/20210928235442.201875-9-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:15 -04:00
Mike McGowen
28ca6d876c scsi: smartpqi: Add extended report physical LUNs
Add support for the new extended formats in the data returned from the
Report Physical LUNs command for controllers that enable this feature.

The new formats allow the reporting of 16-byte WWIDs.

Link: https://lore.kernel.org/r/20210928235442.201875-8-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:15 -04:00
Mahesh Rajashekhara
4f3cefc308 scsi: smartpqi: Avoid failing I/Os for offline devices
Prevent kernel crash by failing outstanding I/O request when the OS takes
device offline.

When posted I/Os to the controller's inbound queue are not picked by the
controller, the driver will halt the controller and take the controller
offline.

When the driver takes the controller offline, the driver will fail all the
outstanding requests which can sometimes lead to an OS crash.

Link: https://lore.kernel.org/r/20210928235442.201875-7-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:15 -04:00
Don Brace
be76f90668 scsi: smartpqi: Add TEST UNIT READY check for SANITIZE operation
Send a TEST UNIT READY to HBA disks and do not present them to the OS if
0x02/0x04/0x1b (SANITIZE IN PROGRESS) is returned.

During boot-up, some OSes appear to hang when there are one or more disks
undergoing a sanitize operation.

According to SCSI SBC4 specification section 4.11.2 "Commands allowed
during SANITIZE", some SCSI commands are permitted, but read/write
operations are not.

When the OS attempts to read the disk partition table a CHECK CONDITION ASC
0x04 ASCQ 0x1b is returned which causes the OS to retry the read until
SANITIZE has completed. This can take hours.

According to document HPE Smart Storage Administrator User Guide, during
the sanitize erase operation, the drive is unusable. I.e. the expected
behavior for SANITIZE is the that disk remains offline even after SANITIZE
has completed. The customer is expected to re-enable the disk using the
management utility.

Link: https://lore.kernel.org/r/20210928235442.201875-6-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:15 -04:00
Kevin Barnett
6ce1ddf532 scsi: smartpqi: Update LUN reset handler
Enhance check for commands queued to the controller.  Add new function
pqi_nonempty_inbound_queue_count() that will wait for all I/O queued for
submission to controller across all queue groups to drain.  Add helper
functions to obtain queue command counts for each queue group.  These
queues should drain quickly as they are already staged to be submitted down
to the controller's IB queue.

Enhance check for outstanding command completion.  Update the count of
outstanding commands while waiting.  This value was not re-obtained and was
potentially causing infinite wait for all completions.

Link: https://lore.kernel.org/r/20210928235442.201875-5-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:15 -04:00
Murthy Bhat
5d1f03e6f4 scsi: smartpqi: Capture controller reason codes
In some rare cases, the driver can halt the controller. Add a reason code
describing why the controller was halted.  Store this reason code in a
controller register to aid in debugging the issue.

Link: https://lore.kernel.org/r/20210928235442.201875-4-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:14 -04:00
Mahesh Rajashekhara
9ee5d6e9ac scsi: smartpqi: Add controller handshake during kdump
Correct kdump hangs when controller is locked up.

There are occasions when a controller reboot (controller soft reset) is
issued when a controller firmware crash dump is in progress.

This leads to incomplete controller firmware crash dump:

 - When the controller crash dump is in progress, and a kdump is initiated,
   the driver issues inbound doorbell reset to bring back the controller in
   SIS mode.

 - If the controller is in locked up state, the inbound doorbell reset does
   not work causing controller initialization failures. This results in the
   driver hanging waiting for SIS mode.

To avoid an incomplete controller crash dump, add in a controller crash
dump handshake:

 - Controller will indicate start and end of the controller crash dump by
   setting some register bits.

 - Driver will look these bits when a kdump is initiated.  If a controller
   crash dump is in progress, the driver will wait for the controller crash
   dump to complete before issuing the controller soft reset then complete
   driver initialization.

Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:14 -04:00
Don Brace
819225b03d scsi: smartpqi: Update device removal management
Update device removal path to handle issues for:

 - rmmod: Correct stack trace when removing devices.
 - rmmod: Synchronize SCSI cache.
 - Update handling for removing devices using sysfs.

Link: https://lore.kernel.org/r/20210928235442.201875-2-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05 00:13:14 -04:00
Dan Carpenter
76a4f7cc59 scsi: mpi3mr: Clean up mpi3mr_print_ioc_info()
This function is more complicated than necessary.

If we change from scnprintf() to snprintf() that lets us remove the if
bytes_wrote < sizeof(protocol) checks.  Also, we can use bytes_wrote ? ","
: "" to print the comma and remove the separate if statement and the
"is_string_nonempty" variable.

[mkp: a few formatting cleanups and s/wrote/written/]

Link: https://lore.kernel.org/r/20210916132605.GF25094@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:51:14 -04:00
Mike Christie
258aad75c6 scsi: iscsi: Fix iscsi_task use after free
Commit d39df15851 ("scsi: iscsi: Have abort handler get ref to conn")
added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but
then also changed the handling of the case where we detect an already
completed task where we now end up doing a goto to the common put/cleanup
code. This results in a iscsi_task use after free, because the common
cleanup code will do a put on the iscsi_task.

This reverts the goto and moves the iscsi_get_conn() to after we've checked
if the iscsi_task is valid.

Link: https://lore.kernel.org/r/20211004210608.9962-1-michael.christie@oracle.com
Fixes: d39df15851 ("scsi: iscsi: Have abort handler get ref to conn")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:40:11 -04:00
James Smart
69a3a7bc72 scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling
When an FC-GS I/O is aborted by lpfc, the driver requires a node pointer
for a dereference operation.  In the abort I/O routine, the driver miscasts
a context pointer to the wrong data type and overwrites a single byte
outside of the allocated space.  This miscast is done in the abort I/O
function handler because the handler works on both FC-GS and FC-LS
commands. However, the code neglected to get the correct job location for
the node.

Fix this by acquiring the necessary node pointer from the correct job
structure depending on the I/O type.

Link: https://lore.kernel.org/r/20211004231210.35524-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:37:08 -04:00
Dan Carpenter
a013c71c63 scsi: elx: efct: Delete stray unlock statement
It's not holding the lock at this stage and the IRQ "flags" are not correct
so it would restore something bogus. Delete the unlock statement.

Link: https://lore.kernel.org/r/20211004103851.GE25015@kili
Fixes: 3e6414003b ("scsi: elx: efct: SCSI I/O handling routines")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:33:31 -04:00
Igor Pylypiv
4084a7235d scsi: pm80xx: Fix misleading log statement in pm8001_mpi_get_nvmd_resp()
pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a
SET_NVMD_DATA response, as the log statement implies.

Fixes: 1f889b5871 ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition")
Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.com
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:31:22 -04:00
Igor Pylypiv
4f632918e7 scsi: pm80xx: Replace open coded check with dev_is_expander()
This is a follow up cleanup to the commit 924a3541ea ("scsi: libsas:
aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()")

Link: https://lore.kernel.org/r/20210929025807.646589-1-ipylypiv@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:30:38 -04:00
Gustavo A. R. Silva
c20bda3419 scsi: target: tcmu: Use struct_size() helper in kmalloc()
Make use of the struct_size() helper instead of an open-coded version, in
order to avoid any potential type mistakes or integer overflows that, in
the worst scenario, could lead to heap overflows.

Link: https://github.com/KSPP/linux/issues/160
Link: https://lore.kernel.org/r/20210927224344.GA190701@embeddedor
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:29:38 -04:00
Dmitry Bogdanov
5384ee089d scsi: target: usb: Replace enable attr with ops.enable
Remove tpg/enable attribute.  Add fabric ops enable_tpg implementation
instead.

Link: https://lore.kernel.org/r/20210910084133.17956-8-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:27:39 -04:00
Dmitry Bogdanov
d7e2932bba scsi: target: ibm_vscsi: Replace enable attr with ops.enable
Remove tpg/enable attribute.  Add fabric ops enable_tpg implementation
instead.

Link: https://lore.kernel.org/r/20210910084133.17956-7-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:27:38 -04:00
Dmitry Bogdanov
9465b4871a scsi: target: srpt: Replace enable attr with ops.enable
Remove tpg/enable attribute.  Add fabric ops enable_tpg implementation
instead.

Link: https://lore.kernel.org/r/20210910084133.17956-6-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:27:38 -04:00
Dmitry Bogdanov
fb00af92e5 scsi: target: sbp: Replace enable attr with ops.enable
Remove tpg/enable attribute.  Add fabric ops enable_tpg implementation
instead.

Link: https://lore.kernel.org/r/20210910084133.17956-5-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:27:38 -04:00
Dmitry Bogdanov
cb8717a720 scsi: target: qla2xxx: Replace enable attr with ops.enable
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation
instead.

Link: https://lore.kernel.org/r/20210910084133.17956-4-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:27:38 -04:00
Dmitry Bogdanov
382731ec01 scsi: target: iscsi: Replace tpg enable attr with ops.enable
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation
instead.

Link: https://lore.kernel.org/r/20210910084133.17956-3-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:27:38 -04:00
Dmitry Bogdanov
80ed33c8ba scsi: target: core: Add common tpg/enable attribute
Many fabric modules provide their own implementation of enable attribute in
tpg.

Provide a way to remove code duplication in the fabric modules and
automatically add "enable" attribute if a fabric module has an
implementation of fabric_enable_tpg().

Link: https://lore.kernel.org/r/20210910084133.17956-2-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:27:38 -04:00
Max Krummenacher
23b72e1340 ARM: dts: colibri-imx6ull-emmc: add device tree
Add a device tree for a Colibri iMX6ULL 1GB which has a eMMC instead of
the raw NAND used on other SKUs.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:27:01 +08:00
Marcel Ziswiler
0fcb3546f6 dt-bindings: arm: fsl: add toradex,colibri-imx6ull-emmc
Add toradex,colibri-imx6ull-emmc for our new Colibri iMX6ULL 1GB (eMMC)
Module and the carrier boards (so far only Colibri Evaluation Board) it
may be mated in.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:26:21 +08:00
Marcel Ziswiler
d3b62ff509 dt-bindings: arm: fsl: clean-up all toradex boards/modules
Simplify and unify the distinction between modules and carrier boards.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:26:11 +08:00
Sumit Saxena
cdf7f6a10d scsi: megaraid_sas: Driver version update to 07.719.03.00-rc1
Link: https://lore.kernel.org/r/20210929124022.24605-4-sumit.saxena@broadcom.com
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:20:10 -04:00
Sumit Saxena
4c32edc350 scsi: megaraid_sas: Add helper functions for irq_context
Adding helper functions for ISR access and release to improve readability.

Link: https://lore.kernel.org/r/20210929124022.24605-3-sumit.saxena@broadcom.com
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:20:09 -04:00
Sumit Saxena
e7dcc514a4 scsi: megaraid_sas: Fix concurrent access to ISR between IRQ polling and real interrupt
IRQ polling thread calls ISR after enable_irq() to handle any missed I/O
completion. The atomic flag "in_used" was added to have the synchronization
between the IRQ polling thread and the interrupt context. There is a bug
around it leading to a race condition.

Below is the sequence:

 - IRQ polling thread accesses ISR, fetches the reply descriptor.

 - Real interrupt arrives and pre-empts polling thread (enable_irq() is
   already called).

 - Interrupt context picks the same reply descriptor as fetched by polling
   thread, processes it, and exits.

 - Polling thread resumes and processes the descriptor which is already
   processed by interrupt thread leads to kernel crash.

Setting the "in_used" flag before fetching the reply descriptor ensures
synchronized access to ISR.

Link: https://www.spinics.net/lists/linux-scsi/msg159440.html
Link: https://lore.kernel.org/r/20210929124022.24605-2-sumit.saxena@broadcom.com
Fixes: 9bedd36e91 ("scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs")
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:20:09 -04:00
Marcel Ziswiler
bee8dce2fb ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF to allow for systemd
interoperability. This avoids the following failure on boot:

[   10.615914] systemd[1]: system-getty.slice: unit configures an IP
 firewall, but the local system does not support BPF/cgroup firewalling.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:19:40 +08:00
Marcel Ziswiler
5a7374ec71 ARM: imx_v6_v7_defconfig: build imx sdma driver as module
Build CONFIG_IMX_SDMA as a module to avoid the following boot issue:

[    5.214751] imx-sdma 20ec000.sdma: Direct firmware load for
 imx/sdma/sdma-imx6q.bin failed with error -2
[    5.215762] imx-sdma 20ec000.sdma: Falling back to sysfs fallback
 for: imx/sdma/sdma-imx6q.bin

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:19:28 +08:00
Marcel Ziswiler
e2f42a99ea ARM: imx_v6_v7_defconfig: rebuild default configuration
Run "make imx_v6_v7_defconfig; make savedefconfig" to rebuild
imx_v6_v7_defconfig.

This dropped the following nowadays obsolete configuration options:

CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
CONFIG_CS89x0=y (selected by CS89x0_PLATFORM)
CONFIG_SMSC_PHY=y (selected by USB_NET_SMSC95XX)
CONFIG_GPIO_MC9S08DZ60=y (depends on MACH_MX35_3DS)
CONFIG_REGULATOR=y (selected by various stuff)
CONFIG_MEDIA_CAMERA_SUPPORT=y (defaults to on if MEDIA_CAMERA)
CONFIG_MEDIA_CONTROLLER=y (selected by various stuff)
CONFIG_VIDEO_V4L2_SUBDEV_API=y (selected by various stuff)
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_FSL_USB2=y

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:19:19 +08:00
Marcel Ziswiler
9358356d61 ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant
Change CONFIG_SND_SOC_TLV320AIC3X to CONFIG_SND_SOC_TLV320AIC3X_I2C.
I did double check all current mainline device trees and they are all
using the I2C rather than the SPI variant.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:18:37 +08:00
Marcel Ziswiler
da9226d76f ARM: imx_v6_v7_defconfig: enable mtd physmap
Enable CONFIG_MTD_PHYSMAP which is nowadays required for
CONFIG_MTD_PHYSMAP_OF.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-05 11:18:25 +08:00
Guo Zhi
d4996c6eac scsi: advansys: Fix kernel pointer leak
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.

Change %lx to %p to print the hashed pointer.

Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:15:21 -04:00
Konstantin Shelekhin
05787e3456 scsi: target: core: Make logs less verbose
Change the log level of the following message to debug:

	Unsupported SCSI Opcode 0xXX, sending CHECK_CONDITION.

This message is mostly helpful during debugging sessions in order to
understand errors on the initiator side. But most of the time it's just
useless and makes reading logs much harder.

It gets particularly annoying if there are many initiators that come and go
or if an initiator runs a program that does not care whether the command is
supported and just keeps sending it.

Link: https://lore.kernel.org/r/20210929114959.705852-1-k.shelekhin@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 23:12:58 -04:00
Adrian Hunter
87bf6a6bbe scsi: ufs: core: Do not exit ufshcd_err_handler() unless operational or dead
Callers of ufshcd_err_handler() expect it to return in an operational
state. However, the code does not check the state before exiting.

Add a check for the state and perform retries until either success or the
maximum number of retries is reached.

Link: https://lore.kernel.org/r/20211002154550.128511-3-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 22:20:38 -04:00
Adrian Hunter
54a4045342 scsi: ufs: core: Do not exit ufshcd_reset_and_restore() unless operational or dead
Callers of ufshcd_reset_and_restore() expect it to return in an operational
state. However, the code only checks direct errors and so the ufshcd_state
may not be UFSHCD_STATE_OPERATIONAL due to error interrupts.

Fix by also checking ufshcd_state, still allowing non-fatal errors which
are left for the error handler to deal with.

Link: https://lore.kernel.org/r/20211002154550.128511-2-adrian.hunter@intel.com
Reviewed-by: Avri altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 22:20:38 -04:00
Bart Van Assche
edc0596cc0 scsi: ufs: core: Stop clearing UNIT ATTENTIONS
Commit aa53f580e6 ("scsi: ufs: Minor adjustments to error handling")
introduced a ufshcd_clear_ua_wluns() call in
ufshcd_err_handling_unprepare(). As explained in detail by Adrian Hunter,
this can trigger a deadlock. Avoid that deadlock by removing the code that
clears the unit attention. This is safe because the only software that
relies on clearing unit attentions is the Android Trusty software and
because support for handling unit attentions has been added in the Trusty
software.

See also https://lore.kernel.org/linux-scsi/20210930124224.114031-2-adrian.hunter@intel.com/

Note that "scsi: ufs: Retry START_STOP on UNIT_ATTENTION" is a prerequisite
for this commit.

Link: https://lore.kernel.org/r/20211001182015.1347587-3-jaegeuk@kernel.org
Fixes: aa53f580e6 ("scsi: ufs: Minor adjustments to error handling")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 22:20:38 -04:00
Jaegeuk Kim
af21c3fd5b scsi: ufs: core: Retry START_STOP on UNIT_ATTENTION
Commit 57d104c153 ("ufs: add UFS power management support") made the UFS
driver submit a REQUEST SENSE command before submitting a power management
command to a WLUN to clear the POWER ON unit attention. Instead of
submitting a REQUEST SENSE command before submitting a power management
command, retry the power management command until it succeeds.

This is the preparation to get rid of all UNIT ATTENTION code which should
be handled by users.

Link: https://lore.kernel.org/r/20211001182015.1347587-2-jaegeuk@kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 22:20:38 -04:00
Bean Huo
f44abcfc3f scsi: ufs: core: Remove return statement in void function
Return statement is not useful at the end of "void" function.

Link: https://lore.kernel.org/r/20210929200640.828611-4-huobean@gmail.com
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 22:20:38 -04:00