Commit graph

1,089,026 commits

Author SHA1 Message Date
Sean Christopherson
e8a747d088 KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
Check whether a CPUID entry's index is significant before checking for a
matching index to hack-a-fix an undefined behavior bug due to consuming
uninitialized data.  RESET/INIT emulation uses kvm_cpuid() to retrieve
CPUID.0x1, which does _not_ have a significant index, and fails to
initialize the dummy variable that doubles as EBX/ECX/EDX output _and_
ECX, a.k.a. index, input.

Practically speaking, it's _extremely_  unlikely any compiler will yield
code that causes problems, as the compiler would need to inline the
kvm_cpuid() call to detect the uninitialized data, and intentionally hose
the kernel, e.g. insert ud2, instead of simply ignoring the result of
the index comparison.

Although the sketchy "dummy" pattern was introduced in SVM by commit
66f7b72e11 ("KVM: x86: Make register state after reset conform to
specification"), it wasn't actually broken until commit 7ff6c03503
("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the
order of operations such that "index" was checked before the significant
flag.

Avoid consuming uninitialized data by reverting to checking the flag
before the index purely so that the fix can be easily backported; the
offending RESET/INIT code has been refactored, moved, and consolidated
from vendor code to common x86 since the bug was introduced.  A future
patch will directly address the bad RESET/INIT behavior.

The undefined behavior was detected by syzbot + KernelMemorySanitizer.

  BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68
  BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103
  BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
   cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline]
   kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline]
   kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
   kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885
   kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923
   vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534
   vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788
   kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020

  Local variable ----dummy@kvm_vcpu_reset created at:
   kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812
   kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923

Reported-by: syzbot+f3985126b746b3d59c9d@syzkaller.appspotmail.com
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 2a24be79b6 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping")
Fixes: 7ff6c03503 ("KVM: x86: Remove stateful CPUID handling")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210929222426.1855730-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 04:20:33 -04:00
Ville Syrjälä
cff4c2c645 drm/i915: Introduce intel_panel_compute_config()
Let's introduce a compute_config() helper for fixed mode panels.
For now all it does is the fixed_mode->adjusted_mode copy.

Note that with sDVO we have to ask the external encoder chip
to spit out our actual display timings for us, so the fixed_mode
to adjusted_mode copy done by intel_panel_compute_config() is
redundant, but we still want to use it to do other checks for us
later. We'll be fine so long as we only call it before
intel_sdvo_get_preferred_input_mode() overwrites adjusted_mode
with the timings from the encoder.

v2: Use intel_panel_compute_config() with sDVO

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927185207.13620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-09-30 11:20:13 +03:00
Ville Syrjälä
00fc3787d2 drm/i915: Reject modes that don't match fixed_mode vrefresh
When using a fixed mode we won't change the refresh rate ever.
So filter out all modes that don't match the fixed_mode's refresh
rate.

I'm going to declare the "rounded to nearest Hz refresh
rates must match" approach good enough for now.

Note that we could start supporting multiple refresh rates
with panels that can do it, but that would mean replacing
the single fixed mode concept with a list of fixed modes.
Then we could look for the closest match to the user's
requested refresh rate and use that. But all of that would
be a fair bit of work so we'll leave it for later.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/2939
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-09-30 11:19:46 +03:00
Ville Syrjälä
8a567b1102 drm/i915: Use intel_panel_mode_valid() for DSI/LVDS/(s)DVO
All fixed mode panels should behave the same way when it comes to mode
filtering. Reuse the intel_panel_mode_valid() for all of them.

This changes the behaviour to match what we do for eDP, ie.
reject anything that doesn't exactly match the fixed mode
dimensions. Users can still manually provide different
sized modes which will be handled by the panel fitter just
as before. The difference is that we can no longer report
funny modes in the connector's mode list.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-09-30 11:19:08 +03:00
Ville Syrjälä
082436068c drm/i915: Extract intel_panel_mode_valid()
Extract intel_panel_mode_valid() from the eDP code to a generic helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-09-30 11:18:32 +03:00
Sean Young
4114978dcd media: ir_toy: prevent device from hanging during transmit
If the IR Toy is receiving IR while a transmit is done, it may end up
hanging. We can prevent this from happening by re-entering sample mode
just before issuing the transmit command.

Link: https://github.com/bengtmartensson/HarcHardware/discussions/25

Cc: stable@vger.kernel.org
[mchehab: renamed: s/STATE_RESET/STATE_COMMAND_NO_RESP/ ]
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:10:26 +02:00
Prashant Malani
fb75686bed platform/chrome: cros_ec_typec: Use cros_ec_command()
Re-use the existing cros_ec_command() instead of relying on a duplicate
version.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-6-pmalani@chromium.org
2021-09-30 10:09:47 +02:00
Prashant Malani
4f1406396e platform/chrome: cros_ec_proto: Add version for ec_command
Add a version parameter to cros_ec_command() for callers that may want
to specify which version of the host command they would like to use.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-5-pmalani@chromium.org
2021-09-30 10:09:47 +02:00
Prashant Malani
5d122256f4 platform/chrome: cros_ec_proto: Make data pointers void
Convert the input and output data pointers for cros_ec_command() to
void pointers so that the callers don't have to cast their custom
structs to uint8_t *.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-4-pmalani@chromium.org
2021-09-30 10:09:47 +02:00
Prashant Malani
7101c83950 platform/chrome: cros_usbpd_notify: Move ec_command()
cros_ec_command() can be used by other modules too. So, move it to a
common location and export it.

This patch does not introduce any functional changes.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-3-pmalani@chromium.org
2021-09-30 10:09:47 +02:00
Prashant Malani
67ea0239fb platform/chrome: cros_usbpd_notify: Rename cros_ec_pd_command()
Rename cros_ec_pd_command()_to cros_ec_command() since it can be used
for sending any host command, and not just PD related ones.

This patch does not introduce any functional changes.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210930022403.3358070-2-pmalani@chromium.org
2021-09-30 10:09:47 +02:00
Colin Ian King
eb057514cc platform/chrome: cros_ec: Fix spelling mistake "responsed" -> "response"
There are spelling mistakes in dev_warn messages. Fix them.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210925171743.173219-1-colin.king@canonical.com
2021-09-30 10:09:47 +02:00
Zelin Deng
773e89ab00 ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
hv_clock is preallocated to have only HVC_BOOT_ARRAY_SIZE (64) elements;
if the PTP_SYS_OFFSET_PRECISE ioctl is executed on vCPUs whose index is
64 of higher, retrieving the struct pvclock_vcpu_time_info pointer with
"src = &hv_clock[cpu].pvti" will result in an out-of-bounds access and
a wild pointer.  Change it to "this_cpu_pvti()" which is guaranteed to
be valid.

Fixes: 95a3d4454b ("Switch kvmclock data to a PER_CPU variable")
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Message-Id: <1632892429-101194-3-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 04:08:15 -04:00
Randy Dunlap
2188488356 media: s5p-jpeg: rename JPEG marker constants to prevent build warnings
The use of a macro named 'RST' conflicts with one of the same name
in arch/mips/include/asm/mach-rc32434/rb.h. This causes build
warnings on some MIPS builds.

Change the names of the JPEG marker constants to be in their own
namespace to fix these build warnings and to prevent other similar
problems in the future.

Fixes these build warnings:

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:14:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
      |
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:13:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c:12:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

In file included from ../drivers/media/platform/s5p-jpeg/jpeg-core.c:31:
../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined
   43 | #define RST                             0xd0
../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
   13 | #define RST             (1 << 15)

Also update the kernel-doc so that the word "marker" is not
repeated.

Link: https://lore.kernel.org/linux-media/20210907044022.30602-1-rdunlap@infradead.org
Fixes: bb677f3ac4 ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:04 +02:00
Nicolas Dufresne
448ea5ee47 media: cedrus: Fix SUNXI tile size calculation
Tiled formats requires full rows being allocated (even for Chroma
planes). When the number of Luma tiles is odd, we need to round up
to twice the tile width in order to roundup the number of Chroma
tiles.

This was notice with a crash running BA1_FT_C compliance test using
sunxi tiles using GStreamer. Cedrus driver would allocate 9 rows for
Luma, but only 4.5 rows for Chroma, causing userspace to crash.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:04 +02:00
Jernej Skrabec
95a10c4eb3 media: hantro: Fix check for single irq
Some cores use only one interrupt and in such case interrupt name in DT
is not needed. Driver supposedly accounted that, but due to the wrong
field check it never worked. Fix that.

Fixes: 18d6c8b7b4 ("media: hantro: add fallback handling for single irq/clk")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:04 +02:00
Jackie Liu
a466530b3a watchdog/sb_watchdog: fix compilation problem due to COMPILE_TEST
Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES.
In arch/mips/sibyte/Platform like:

  cflags-$(CONFIG_SIBYTE_BCM112X) +=                                      \
                -I$(srctree)/arch/mips/include/asm/mach-sibyte          \
                -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL

Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL.
SIBYTE_HDR_FMASK_ALL is mean:

 #define SIBYTE_HDR_FMASK_ALL  SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
				     | SIBYTE_HDR_FMASK_1480_ALL)

So, If not limited to CPU_SB1, we will get such an error:

  arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror]
  arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror]

Fixes: da2a68b3eb ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-30 10:08:03 +02:00
Linus Torvalds
135291f36d vboxfs: fix broken legacy mount signature checking
Commit 9d682ea6bc ("vboxsf: Fix the check for the old binary
mount-arguments struct") was meant to fix a build error due to sign
mismatch in 'char' and the use of character constants, but it just moved
the error elsewhere, in that on some architectures characters and signed
and on others they are unsigned, and that's just how the C standard
works.

The proper fix is a simple "don't do that then".  The code was just
being silly and odd, and it should never have cared about signed vs
unsigned characters in the first place, since what it is testing is not
four "characters", but four bytes.

And the way to compare four bytes is by using "memcmp()".

Which compilers will know to just turn into a single 32-bit compare with
a constant, as long as you don't have crazy debug options enabled.

Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-30 10:08:03 +02:00
Basavaraj Natikar
601e6baaa2 HID: amd_sfh: Fix potential NULL pointer dereference
The cl_data field of a privdata must be allocated and updated before
using in amd_sfh_hid_client_init() function.

Hence handling NULL pointer cl_data accordingly.

Fixes: d46ef750ed ("HID: amd_sfh: Fix potential NULL pointer dereference")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-30 10:08:03 +02:00
Andrej Shadura
38245d0340 HID: u2fzero: ignore incomplete packets without data
Since the actual_length calculation is performed unsigned, packets
shorter than 7 bytes (e.g. packets without data or otherwise truncated)
or non-received packets ("zero" bytes) can cause buffer overflow.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214437
Fixes: 42337b9d4d958("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-30 10:08:03 +02:00
Evgeny Novikov
ef11357046 HID: amd_sfh: Fix potential NULL pointer dereference
devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at
registration that will cause NULL pointer dereference since
corresponding data is not initialized yet. The patch moves
initialization of data before devm_add_action_or_reset().

Found by Linux Driver Verification project (linuxtesting.org).

[jkosina@suse.cz: rebase]
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-30 10:08:03 +02:00
Joshua-Dickens
94f9c3567e HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs
Add the new PIDs to wacom_wac.c to support the new models in the Intuos series.

[jkosina@suse.cz: fix changelog]
Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-30 10:08:02 +02:00
Mizuho Mori
125aaf6ec2 HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS
Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong.

Below is a report descriptor.

0x05, 0x01,         /*  Usage Page (Desktop),                           */
0x09, 0x06,         /*  Usage (Keyboard),                               */
0xA1, 0x01,         /*  Collection (Application),                       */
0x85, 0x01,         /*      Report ID (1),                              */
0x05, 0x07,         /*      Usage Page (Keyboard),                      */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */
0x19, 0xE0,         /*      Usage Minimum (KB Leftcontrol),             */
0x29, 0xE7,         /*      Usage Maximum (KB Right GUI),               */
0x75, 0x01,         /*      Report Size (1),                            */
0x95, 0x08,         /*      Report Count (8),                           */
0x81, 0x02,         /*      Input (Variable),                           */
0x95, 0x05,         /*      Report Count (5),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x05, 0x08,         /*      Usage Page (LED),                           */
0x19, 0x01,         /*      Usage Minimum (01h),                        */
0x29, 0x05,         /*      Usage Maximum (05h),                        */
0x91, 0x02,         /*      Output (Variable),                          */
0x95, 0x01,         /*      Report Count (1),                           */
0x75, 0x03,         /*      Report Size (3),                            */
0x91, 0x03,         /*      Output (Constant, Variable),                */
0x95, 0x08,         /*      Report Count (8),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */

here is a report descriptor which is parsed one in kernel.
see sys/kernel/debug/hid/<dev>/rdesc

05 01 09 06 a1 01 85 01 05 07
15 00 25 01 19 e0 29 e7 75 01
95 08 81 02 95 05 75 01 05 08
19 01 29 05 91 02 95 01 75 03
91 03 95 08 75 01 15 00 25 01
06 00 ff 09 03 81 03 95 06 75
08 15 00 25 [65] 05 07 19 00 29
[65] 81 00 95 01 75 01 15 00 25
01 05 0c 09 b8 81 02 95 01 75
01 06 01 ff 09 03 81 02 95 01
75 06 81 03 06 02 ff 09 55 85
55 15 00 26 ff 00 75 08 95 40
b1 a2 c0 06 00 ff 09 14 a1 01
85 90 05 84 75 01 95 03 15 00
25 01 09 61 05 85 09 44 09 46
81 02 95 05 81 01 75 08 95 01
15 00 26 ff 00 09 65 81 02 c0
00

Position 64(Logical Maximum) and 70(Usage Maximum) are 101.
Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support.
position 117 is also 101 but not related(it is Usage 65h).

There are no difference of product id between JIS and ANSI.
They are same 0x0267.

Signed-off-by: Mizuho Mori <morimolymoly@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-30 10:08:02 +02:00
F.A.Sulaiman
689e453a9b HID: betop: fix slab-out-of-bounds Write in betop_probe
Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver.
The problem is the driver assumes the device must have an input report but
some malicious devices violate this assumption.

So this patch checks hid_device's input is non empty before it's been used.

Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com
Signed-off-by: F.A. SULAIMAN <asha.16@itfac.mrt.ac.lk>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-30 10:08:02 +02:00
Cai Huoqing
2990cd10e1 media: dvb-frontends/cxd2099: Remove repeated verbose license text
remove it because SPDX-License-Identifier is already used

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:02 +02:00
Cai Huoqing
be7468c77b media: dvb-frontends/stv0910: Remove repeated verbose license text
remove it because SPDX-License-Identifier is already used

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:02 +02:00
Zelin Deng
ad9af93068 x86/kvmclock: Move this_cpu_pvti into kvmclock.h
There're other modules might use hv_clock_per_cpu variable like ptp_kvm,
so move it into kvmclock.h and export the symbol to make it visiable to
other modules.

Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Message-Id: <1632892429-101194-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 04:08:01 -04:00
Cai Huoqing
c251d8b3b7 media: dvb-frontends/stv6111: Remove repeated verbose license text
remove it because SPDX-License-Identifier is already used

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
Cai Huoqing
5f1644bd81 media: dvb-frontend/mxl5xx: Remove repeated verbose license text
remove it because SPDX-License-Identifier is already used

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
Cai Huoqing
19c23f4fd8 media: dvb-frontend/mxl692: Remove repeated verbose license text
remove it because SPDX-License-Identifier is already used

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
Rajat Asthana
476db72e52 media: mceusb: return without resubmitting URB in case of -EPROTO error.
Syzkaller reported a warning called "rcu detected stall in dummy_timer".

The error seems to be an error in mceusb_dev_recv(). In the case of
-EPROTO error, the routine immediately resubmits the URB. Instead it
should return without resubmitting URB.

Reported-by: syzbot+4d3749e9612c2cfab956@syzkaller.appspotmail.com
Signed-off-by: Rajat Asthana <rajatasthana4@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
Pavel Skripkin
44870a9e7a media: mxl111sf: change mutex_init() location
Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.

Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:

	dvb_usbv2_init()
	  dvb_usbv2_adapter_init()
	    dvb_usbv2_adapter_frontend_init()
	      props->frontend_attach()

	  props->init()

Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex.

Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com

Fixes: 8572211842 ("[media] mxl111sf: convert to new DVB USB")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
jing yangyang
dccdd92b7b media: meson-ir-tx: fix platform_no_drv_owner.cocci warnings
./drivers/media/rc/meson-ir-tx.c:398:3-8: No need to set .owner here. The core will do it.

Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
Sean Young
92f461517d media: ir_toy: do not resubmit broken urb
This causes the same urb to resubmitted continuously, hogging up a cpu.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
Sean Young
1d37c85425 media: ir_toy: deal with residual irdata before expected response
After sending the start transmit command, the device is supposed to
respond with the length of the buffer which can be sent. There might
be some residual ir data there.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:01 +02:00
Sean Young
5173cca012 media: ir_toy: print firmware version in correct format
A value of 25 means firmware version 2.5.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:00 +02:00
Sean Young
c73ba202a8 media: ir-kbd-i2c: improve responsiveness of hauppauge zilog receivers
The IR receiver has two issues:

 - Sometimes there is no response to a button press
 - Sometimes a button press is repeated when it should not have been

Hanging the polling interval fixes this behaviour.

Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=994050

Cc: stable@vger.kernel.org
Suggested-by: Joaquín Alberto Calderón Pozo <kini_calderon@hotmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:00 +02:00
Eugen Hristev
d7f26849ed media: atmel: fix the ispck initialization
The runtime enabling of the ISPCK (internally clocks the pipeline inside
the ISC) has to be done after the pm_runtime for the ISC dev has been
started.

After the commit by Mauro:
the ISC failed to probe with the error:

atmel-sama5d2-isc f0008000.isc: failed to enable ispck: -13
atmel-sama5d2-isc: probe of f0008000.isc failed with error -13

This is because the enabling of the ispck is done too early in the probe,
and the PM runtime returns invalid request.
Thus, moved this clock enabling after pm_runtime_idle is called.

The ISPCK is required only for sama5d2 type of ISC.
Thus, add a bool inside the isc struct that is platform dependent.
For the sama7g5-isc, the enabling of the ISPCK is wrong and does not make
sense. Removed it from the sama7g5 probe. In sama7g5-isc, there is only
one clock, the MCK, which also clocks the internal pipeline of the ISC.

Adapted the clk_prepare and clk_unprepare to request the runtime PM
for both clocks (MCK and ISPCK) in case of sama5d2-isc, and the single
clock (MCK) in case of sama7g5-isc.

Fixes: dd97908ee3 ("media: atmel: properly get pm_runtime")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:00 +02:00
Hans Verkuil
9d45ccf721 media: staging/media/meson: vdec.h: fix kerneldoc warnings
Fix a bunch of kernel-doc warnings:

drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'core' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'data' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'len' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:28: warning: Function parameter or member 'work' not described in 'esparser_queue_all_src'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'vdec_hevcf_clk' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'vdev_dec' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'lock' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:141: warning: Function parameter or member 'resume' not described in 'amvdec_codec_ops'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'lock' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'sequence_out' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'num_dst_bufs' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'changed_format' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'last_offset' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'wrap_count' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'fw_idx_to_vb2_idx' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec_helpers.h:59: warning: Function parameter or member 'tc' not described in 'amvdec_add_ts'
drivers/staging/media/meson/vdec/vdec_helpers.h:59: warning: Function parameter or member 'flags' not described in 'amvdec_add_ts'

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:00 +02:00
Colin Ian King
7266dda2f1 media: cx23885: Fix snd_card_free call on null card pointer
Currently a call to snd_card_new that fails will set card with a NULL
pointer, this causes a null pointer dereference on the error cleanup
path when card it passed to snd_card_free. Fix this by adding a new
error exit path that does not call snd_card_free and exiting via this
new path.

Addresses-Coverity: ("Explicit null dereference")

Fixes: 9e44d63246 ("[media] cx23885: Add ALSA support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:00 +02:00
Kees Cook
42bb98e420 media: tm6000: Avoid card name truncation
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Trident TVMaster TM5600/6000/60".

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: e28f49b0b2 ("V4L/DVB: tm6000: fix some info messages")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:00 +02:00
Kees Cook
2908249f38 media: si470x: Avoid card name truncation
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Silicon Labs Si470x FM Radio Re".

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 78656acdcf ("V4L/DVB (7038): USB radio driver for Silicon Labs Si470x FM Radio Receivers")
Fixes: cc35bbddfe ("V4L/DVB (12416): radio-si470x: add i2c driver for si470x")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:08:00 +02:00
Kees Cook
dfadec236a media: radio-wl1273: Avoid card name truncation
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Texas Instruments Wl1273 FM Rad".

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 87d1a50ce4 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00
Arnd Bergmann
ea7caaea6e media: rcar_drif: select CONFIG_V4L2_ASYNC
Without this, I see a randconfig link failure:

aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_remove':
rcar_drif.c:(.text+0x2a8): undefined reference to `v4l2_async_notifier_unregister'
aarch64-linux-ld: rcar_drif.c:(.text+0x2b0): undefined reference to `v4l2_async_notifier_cleanup'
aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_sdr_probe':
rcar_drif.c:(.text+0x1444): undefined reference to `v4l2_async_notifier_init'
aarch64-linux-ld: rcar_drif.c:(.text+0x14a0): undefined reference to `v4l2_async_notifier_register'
aarch64-linux-ld: rcar_drif.c:(.text+0x14d8): undefined reference to `v4l2_async_notifier_cleanup'
aarch64-linux-ld: rcar_drif.c:(.text+0x15a8): undefined reference to `__v4l2_async_notifier_add_fwnode_subdev'

I could not easily figure out when this was introduced, as this code
has not changed in a while but I only saw the problem recently.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00
Pedro Terra
9b4a9b31b9 media: vimc: Enable set resolution at the scaler src pad
Modify the scaler subdevice to accept setting the resolution of the source
pad (previously the source resolution would always be 3 times the sink for
both dimensions). Now any resolution can be set at src (even smaller ones)
and the sink video will be scaled to match it.

Test example: With the vimc module up (using the default vimc topology)
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \
	--stream-to=test.raw

The result will be a cropped stream that can be checked with the command
ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \
	-video_size "300x700" test.raw

Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Pedro Terra <pedro@terraco.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00
Niklas Söderlund
a5991c4e94 media: rcar-vin: Use user provided buffers when starting
When adding an internal scratch buffer to improve buffer handling when
stopping it was also erroneously used when syncing at capture start.
This led to that the first three buffers captured were always dropped
as they were captured in the scratch buffer instead of in a buffer
provided by the user.

Allow the hardware to be given user provided buffers when preparing for
capture in the stopped state. This still allows the driver to sync with
the hardware and always completes the buffers to user-space in the
correct order as no buffers are completed before the sync is complete.
This change improves the driver as buffers are completed and given to
the user three frames earlier than before.

The change also fixes a warning produced by v4l2-compliance,

    warn: v4l2-test-buffers.cpp(448): got sequence number 3, expected 0

[hverkuil: fixed some typos in the Subject and the log message]

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00
Colin Ian King
1c43c1ecd6 media: saa7164: Remove redundant assignment of pointer t
The pointer t is being assigned a value that is never read, it is being
updated later on inside the for-loop. The assignment is redundant and
can be removed.

Addresses-Coverity: ("Unused value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00
Cai Huoqing
5a3683d60e media: staging: media: rkvdec: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00
Ondrej Jirman
8ed8528346 media: sun6i-csi: Allow the video device to be open multiple times
Previously it was possible, but a recent fix for uninitialized
`ret` variable broke this behavior.

v4l2_fh_is_singular_file() check is there just to determine
whether the power needs to be enabled, and it's not a failure
if it returns false.

Fixes: ba9139116b ("media: sun6i-csi: add a missing return code")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00
Martin Kepplinger
6d0d779b21 media: imx: set a media_device bus_info string
Some tools like v4l2-compliance let users select a media device based
on the bus_info string which can be quite convenient. Use a unique
string for that.

This also fixes the following v4l2-compliance warning:
warn: v4l2-test-media.cpp(52): empty bus_info

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30 10:07:59 +02:00