Commit graph

1,089,026 commits

Author SHA1 Message Date
Rafał Miłecki
9fb90ae6ca ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
BCM53573 family SoC have Ethernet switch connected to the first Ethernet
controller (accessible over MDIO).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-21 14:19:41 -07:00
Ben Widawsky
ed97afb533 cxl/pci: Disambiguate cxl_pci further from cxl_mem
Commit 21e9f76733 ("cxl: Rename mem to pci") introduced the cxl_pci
driver which had formerly been named cxl_mem. At the time, the goal was
to be as light touch as possible because there were other patches in
flight. Since things have settled now, and a new cxl_mem driver will be
introduced shortly, spend the LOC now to clean up the existing names.

While here, fix the kernel docs to explain the situation better after
the core rework that has already landed.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210913163324.1008564-4-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 14:18:49 -07:00
Ben Widawsky
fa9a7d2db6 Documentation/cxl: Add bus internal docs
Kernel docs are already present in this file, but nothing is instructed
to generate them. Address that.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210913163324.1008564-2-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 14:18:49 -07:00
Dan Williams
48667f6761 cxl/core: Split decoder setup into alloc + add
The kbuild robot reports:

    drivers/cxl/core/bus.c:516:1: warning: stack frame size (1032) exceeds
    limit (1024) in function 'devm_cxl_add_decoder'

It is also the case the devm_cxl_add_decoder() is unwieldy to use for
all the different decoder types. Fix the stack usage by splitting the
creation into alloc and add steps. This also allows for context
specific construction before adding.

With the split the caller is responsible for registering a devm callback
to trigger device_unregister() for the decoder rather than it being
implicit in the decoder registration. I.e. the routine that calls alloc
is responsible for calling put_device() if the "add" operation fails.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163225205828.3038145.6831131648369404859.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 14:09:34 -07:00
Dan Williams
7d3eb23c4c tools/testing/cxl: Introduce a mock memory device + driver
Introduce an emulated device-set plus driver to register CXL memory
devices, 'struct cxl_memdev' instances, in the mock cxl_test topology.
This enables the development of HDM Decoder (Host-managed Device Memory
Decoder) programming flow (region provisioning) in an environment that
can be updated alongside the kernel as it gains more functionality.

Whereas the cxl_pci module looks for CXL memory expanders on the 'pci'
bus, the cxl_mock_mem module attaches to CXL expanders on the platform
bus emitted by cxl_test.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116440099.2460985.10692549614409346604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 14:09:34 -07:00
Dan Williams
49be6dd807 cxl/mbox: Move command definitions to common location
In preparation for cxl_test to mock responses to mailbox command
requests, move some definitions from core/mbox.c to cxlmem.h.

No functional changes intended.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116439547.2460985.10457111177103589574.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 14:09:34 -07:00
Dan Williams
a5c2580216 cxl/bus: Populate the target list at decoder create
As found by cxl_test, the implementation populated the target_list for
the single dport exceptional case, it missed populating the target_list
for the typical multi-dport case. Root decoders always know their target
list at the beginning of time, and even switch-level decoders should
have a target list of one or more zeros by default, depending on the
interleave-ways setting.

Walk the hosting port's dport list and populate based on the passed in
map.

Move devm_cxl_add_passthrough_decoder() out of line now that it does the
work of generating a target_map.

Before:
$ cat /sys/bus/cxl/devices/root2/decoder*/target_list
0

0

After:
$ cat /sys/bus/cxl/devices/root2/decoder*/target_list
0
0,1,2,3
0
0,1,2,3

Where root2 is a CXL topology root object generated by 'cxl_test'.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116439000.2460985.11713777051267946018.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 14:09:34 -07:00
Dan Williams
67dcdd4d3b tools/testing/cxl: Introduce a mocked-up CXL port hierarchy
Create an environment for CXL plumbing unit tests. Especially when it
comes to an algorithm for HDM Decoder (Host-managed Device Memory
Decoder) programming, the availability of an in-kernel-tree emulation
environment for CXL configuration complexity and corner cases speeds
development and deters regressions.

The approach taken mirrors what was done for tools/testing/nvdimm/. I.e.
an external module, cxl_test.ko built out of the tools/testing/cxl/
directory, provides mock implementations of kernel APIs and kernel
objects to simulate a real world device hierarchy.

One feedback for the tools/testing/nvdimm/ proposal was "why not do this
in QEMU?". In fact, the CXL development community has developed a QEMU
model for CXL [1]. However, there are a few blocking issues that keep
QEMU from being a tight fit for topology + provisioning unit tests:

1/ The QEMU community has yet to show interest in merging any of this
   support that has had patches on the list since November 2020. So,
   testing CXL to date involves building custom QEMU with out-of-tree
   patches.

2/ CXL mechanisms like cross-host-bridge interleave do not have a clear
   path to be emulated by QEMU without major infrastructure work. This
   is easier to achieve with the alloc_mock_res() approach taken in this
   patch to shortcut-define emulated system physical address ranges with
   interleave behavior.

The QEMU enabling has been critical to get the driver off the ground,
and may still move forward, but it does not address the ongoing needs of
a regression testing environment and test driven development.

This patch adds an ACPI CXL Platform definition with emulated CXL
multi-ported host-bridges. A follow on patch adds emulated memory
expander devices.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1]
Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:47:10 -07:00
Dan Williams
2e52b6256b cxl/pmem: Add support for multiple nvdimm-bridge objects
In preparation for a mocked unit test environment for CXL objects, allow
for multiple unique nvdimm-bridge objects.

For now, just allow multiple bridges to be registered. Later, when there
are multiple present, further updates are needed to
cxl_find_nvdimm_bridge() to identify which bridge is associated with
which CXL hierarchy for nvdimm registration.

Note that this does change the kernel device-name for the bridge object.
User space should not have any attachment to the device name at this
point as it is still early days in the CXL driver development.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163164647007.2831228.2150246954620721526.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:47:10 -07:00
Dan Williams
60b8f17215 cxl/pmem: Translate NVDIMM label commands to CXL label commands
The LIBNVDIMM IOCTL UAPI calls back to the nvdimm-bus-provider to
translate the Linux command payload to the device native command format.
The LIBNVDIMM commands get-config-size, get-config-data, and
set-config-data, map to the CXL memory device commands device-identify,
get-lsa, and set-lsa. Recall that the label-storage-area (LSA) on an
NVDIMM device arranges for the provisioning of namespaces. Additionally
for CXL the LSA is used for provisioning regions as well.

The data from device-identify is already cached in the 'struct cxl_mem'
instance associated with @cxl_nvd, so that payload return is simply
crafted and no CXL command is issued. The conversion for get-lsa is
straightforward, but the conversion for set-lsa requires an allocation
to append the set-lsa header in front of the payload.

Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163122524923.2534512.9431316965424264864.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:47:09 -07:00
Dan Williams
12f3856ad4 cxl/mbox: Add exclusive kernel command support
The CXL_PMEM driver expects exclusive control of the label storage area
space. Similar to the LIBNVDIMM expectation that the label storage area
is only writable from userspace when the corresponding memory device is
not active in any region, the expectation is the native CXL_PCI UAPI
path is disabled while the cxl_nvdimm for a given cxl_memdev device is
active in LIBNVDIMM.

Add the ability to toggle the availability of a given command for the
UAPI path. Use that new capability to shutdown changes to partitions and
the label storage area while the cxl_nvdimm device is actively proxying
commands for LIBNVDIMM.

Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163164579468.2830966.6980053377428474263.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:57 -07:00
Dan Williams
ff56ab9e16 cxl/mbox: Convert 'enabled_cmds' to DECLARE_BITMAP
Define enabled_cmds as an embedded member of 'struct cxl_mem' rather
than a pointer to another dynamic allocation.

As this leaves only one user of cxl_cmd_count, just open code it and
delete the helper.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116436415.2460985.10101824045493194813.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:57 -07:00
Dan Williams
5a2328f4e8 cxl/pci: Use module_pci_driver
Now that cxl_mem_{init,exit} no longer need to manage debugfs, switch
back to the smaller form of the boiler plate.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116435825.2460985.7201322215431441130.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:57 -07:00
Dan Williams
4faf31b434 cxl/mbox: Move mailbox and other non-PCI specific infrastructure to the core
Now that the internals of mailbox operations are abstracted from the PCI
specifics a bulk of infrastructure can move to the core.

The CXL_PMEM driver intends to proxy LIBNVDIMM UAPI and driver requests
to the equivalent functionality provided by the CXL hardware mailbox
interface. In support of that intent move the mailbox implementation to
a shared location for the CXL_PCI driver native IOCTL path and CXL_PMEM
nvdimm command proxy path to share.

A unit test framework seeks to implement a unit test backend transport
for mailbox commands to communicate mocked up payloads. It can reuse all
of the mailbox infrastructure minus the PCI specifics, so that also gets
moved to the core.

Finally with the mailbox infrastructure and ioctl handling being
transport generic there is no longer any need to pass file
file_operations to devm_cxl_add_memdev(). That allows all the ioctl
boilerplate to move into the core for unit test reuse.

No functional change intended, just code movement.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116435233.2460985.16197340449713287180.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:56 -07:00
Dan Williams
4cb35f1ca0 cxl/pci: Drop idr.h
Commit 3d135db510 ("cxl/core: Move memdev management to core") left
this straggling include for cxl_memdev setup. Clean it up.

Cc: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163116434668.2460985.12264757586266849616.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:56 -07:00
Dan Williams
b64955a929 cxl/mbox: Introduce the mbox_send operation
In preparation for implementing a unit test backend transport for ioctl
operations, and making the mailbox available to the cxl/pmem
infrastructure, move the existing PCI specific portion of mailbox handling
to an "mbox_send" operation.

With this split all the PCI-specific transport details are comprehended
by a single operation and the rest of the mailbox infrastructure is
'struct cxl_mem' and 'struct cxl_memdev' generic.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163116434098.2460985.9004760022659400540.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:56 -07:00
Dan Williams
13e7749d06 cxl/pci: Clean up cxl_mem_get_partition_info()
Commit 0b9159d0ff ("cxl/pci: Store memory capacity values") missed
updating the kernel-doc for 'struct cxl_mem' leading to the following
warnings:

./scripts/kernel-doc -v drivers/cxl/cxlmem.h 2>&1 | grep warn
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'total_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'volatile_only_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'persistent_only_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'partition_align_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'active_volatile_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'active_persistent_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'next_volatile_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'next_persistent_bytes' not described in 'cxl_mem'

Also, it is redundant to describe those same parameters in the
kernel-doc for cxl_mem_get_partition_info(). Given the only user of that
routine updates the values in @cxlm, just do that implicitly internal to
the helper.

Cc: Ira Weiny <ira.weiny@intel.com>
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163157174216.2653013.1277706528753990974.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:56 -07:00
Dan Williams
99e222a5f1 cxl/pci: Make 'struct cxl_mem' device type generic
In preparation for adding a unit test provider of a cxl_memdev, convert
the 'struct cxl_mem' driver context to carry a generic device rather
than a pci device.

Note, some dev_dbg() lines needed extra reformatting per clang-format.

This conversion also allows the cxl_mem_create() and
devm_cxl_add_memdev() calling conventions to be simplified. The "host"
for a cxl_memdev, must be the same device for the driver that allocated
@cxlm.

Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163116432973.2460985.7553504957932024222.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:56 -07:00
Dan Williams
5af96835e4 libnvdimm/labels: Introduce CXL labels
Now that all of use sites of label data have been converted to nsl_*
helpers, introduce the CXL label format. The ->cxl flag in
nvdimm_drvdata indicates the label format the device expects. A
follow-on patch allows a bus provider to select the label style.

Note that the EFI definition of the labels represents the Linux "claim
class" with a GUID. The CXL definition of the labels stores the same
identifier in UUID byte order.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116432405.2460985.5547867384570123403.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:56 -07:00
Dan Williams
540ccaa2e4 libnvdimm/label: Define CXL region labels
Add a definition of the CXL 2.0 region label format. Note this is done
as a separate patch to make the next patch that adds namespace label
support easier to read.

Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116431893.2460985.4003511000574373922.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:56 -07:00
Dan Williams
999c993a85 libnvdimm/labels: Fix kernel-doc for label.h
Clean up existing kernel-doc warnings before adding new CXL label data
structures.

drivers/nvdimm/label.h:66: warning: Function parameter or member 'labelsize' not described in 'nd_namespace_index'
drivers/nvdimm/label.h:66: warning: Function parameter or member 'free' not described in 'nd_namespace_index'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'align' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'reserved' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'type_guid' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'abstraction_guid' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'reserved2' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'checksum' not described in 'nd_namespace_label'

Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116431381.2460985.6990754901097922099.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:55 -07:00
Dan Williams
42e192aa98 libnvdimm/labels: Introduce the concept of multi-range namespace labels
The CXL specification defines a mechanism for namespaces to be comprised
of multiple dis-contiguous ranges. Introduce that concept to the legacy
NVDIMM namespace implementation with a new nsl_set_nrange() helper, that
sets the number of ranges to 1. Once the NVDIMM subsystem supports CXL
labels and updates its namespace capacity provisioning for
dis-contiguous support nsl_set_nrange() can be updated, but in the
meantime CXL label validation requires nrange be non-zero.

Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116430804.2460985.5482188351381597529.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:55 -07:00
Dan Williams
8172db9252 libnvdimm/label: Add a helper for nlabel validation
In the CXL namespace label there is no need for nlabel since that is
inferred from the region. Add a helper that moves nsl_get_label() behind
a helper that validates the number of labels relative to the region.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116430293.2460985.12693942353621355232.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:55 -07:00
Dan Williams
d1c6e08e75 libnvdimm/labels: Add uuid helpers
In preparation for CXL labels that move the uuid to a different offset
in the label, add nsl_{ref,get,validate}_uuid(). These helpers use the
proper uuid_t type. That type definition predated the libnvdimm
subsystem, so now is as a good a time as any to convert all the uuid
handling in the subsystem to uuid_t to match the helpers.

Note that the uuid fields in the label data and superblocks is not
replaced per Andy's expectation that uuid_t is a kernel internal type
not to appear in external ABI interfaces. So, in those case
{import,export}_uuid() is used to go between the 2 types.

Also note that this rework uncovered some unnecessary copies for label
comparisons, those are cleaned up with nsl_uuid_equal().

As for the whitespace changes, all new code is clang-format compliant.

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116429748.2460985.15659993454313919977.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21 13:44:55 -07:00
Gokul Sivakumar
cf8980a362 samples: bpf: Convert ARP table network order fields into readable format
The ARP table that is dumped when the xdp_router_ipv4 process is launched
has the IP address & MAC address in non-readable network byte order format,
also the alignment is off when printing the table.

Address HwAddress
160000e0                1600005e0001
ff96a8c0                ffffffffffff
faffffef                faff7f5e0001
196a8c0		9607871293ea
fb0000e0                fb00005e0001
0               0
196a8c0		9607871293ea
ffff11ac                ffffffffffff
faffffef                faff7f5e0001
fb0000e0                fb00005e0001
160000e0                1600005e0001
160000e0                1600005e0001
faffffef                faff7f5e0001
fb0000e0                fb00005e0001
40011ac         40011ac4202

Fix this by converting the "Address" field from network byte order Hex into
dotted decimal notation IPv4 format and "HwAddress" field from network byte
order Hex into Colon separated Hex format. Also fix the aligntment of the
fields in the ARP table.

Address         HwAddress
224.0.0.22      01:00:5e:00:00:16
192.168.150.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
192.168.150.1	ea:93:12:87:07:96
224.0.0.251     01:00:5e:00:00:fb
0.0.0.0         00:00:00:00:00:00
192.168.150.1	ea:93:12:87:07:96
172.17.255.255  ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251     01:00:5e:00:00:fb
224.0.0.22      01:00:5e:00:00:16
224.0.0.22      01:00:5e:00:00:16
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251     01:00:5e:00:00:fb
172.17.0.4      02:42:ac:11:00:04

Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-2-gokulkumar792@gmail.com
2021-09-21 13:27:54 -07:00
Gokul Sivakumar
f5c4e4191b samples: bpf: Convert route table network order fields into readable format
The route table that is dumped when the xdp_router_ipv4 process is launched
has the "Gateway" field in non-readable network byte order format, also the
alignment is off when printing the table.

Destination             Gateway         Genmask         Metric          Iface
  0.0.0.0               196a8c0         0               0               enp7s0
  0.0.0.0               196a8c0         0               0               wlp6s0
169.254.0.0             196a8c0         16              0               enp7s0
172.17.0.0                0             16              0               docker0
192.168.150.0             0             24              0               enp7s0
192.168.150.0             0             24              0               wlp6s0

Fix this by converting the "Gateway" field from network byte order Hex into
dotted decimal notation IPv4 format and "Genmask" from CIDR notation into
dotted decimal notation IPv4 format. Also fix the aligntment of the fields
in the route table.

Destination     Gateway         Genmask         Metric Iface
0.0.0.0         192.168.150.1   0.0.0.0         0      enp7s0
0.0.0.0         192.168.150.1   0.0.0.0         0      wlp6s0
169.254.0.0     192.168.150.1   255.255.0.0     0      enp7s0
172.17.0.0      0.0.0.0         255.255.0.0     0      docker0
192.168.150.0   0.0.0.0         255.255.255.0   0      enp7s0
192.168.150.0   0.0.0.0         255.255.255.0   0      wlp6s0

Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-1-gokulkumar792@gmail.com
2021-09-21 13:27:54 -07:00
Oliver O'Halloran
06dc660e6e PCI: Rename pcibios_add_device() to pcibios_device_add()
The general convention for pcibios_* hooks is that they're named after the
corresponding pci_* function they provide a hook for. The exception is
pcibios_add_device() which provides a hook for pci_device_add().

Rename pcibios_add_device() to pcibios_device_add() so it matches
pci_device_add().

Also, remove the export of the microblaze version. The only caller must be
compiled as a built-in so there's no reason for the export.

Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>	# s390
2021-09-21 15:26:09 -05:00
Ian Rogers
b28e5e4391 perf daemon: Avoid msan warnings on send_cmd
As a full union is always sent, ensure all bytes of the union are
initialized with memset to avoid msan warnings of use of uninitialized
memory.

An example warning from the daemon test:

Uninitialized bytes in __interceptor_write at offset 71 inside [0x7ffd98da6280, 72)
==11602==WARNING: MemorySanitizer: use-of-uninitialized-value
    #0 0x5597edccdbe4 in ion tools/lib/perf/lib.c:18:6
    #1 0x5597edccdbe4 in writen tools/lib/perf/lib.c:47:9
    #2 0x5597ed221d30 in send_cmd tools/perf/builtin-daemon.c:1376:22
    #3 0x5597ed21b48c in cmd_daemon tools/perf/builtin-daemon.c
    #4 0x5597ed1d6b67 in run_builtin tools/perf/perf.c:313:11
    #5 0x5597ed1d6036 in handle_internal_command tools/perf/perf.c:365:8
    #6 0x5597ed1d6036 in run_argv tools/perf/perf.c:409:2
    #7 0x5597ed1d6036 in main tools/perf/perf.c:539:3

SUMMARY: MemorySanitizer: use-of-uninitialized-value tools/lib/perf/lib.c:18:6 in ion
Exiting

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210617055554.1917997-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-21 16:25:41 -03:00
Mark Brown
96c8395e21
spi: Revert modalias changes
During the v5.13 cycle we updated the SPI subsystem to generate OF style
modaliases for SPI devices, replacing the old Linux style modalises we
used to generate based on spi_device_id which are the DT style name with
the vendor removed.  Unfortunately this means that we start only
reporting OF style modalises and not the old ones and there is nothing
that ensures that drivers list every possible OF compatible string in
their OF ID table.  The result is that there are systems which have been
relying on loading modules based on the old style that are now broken,
as found by Russell King with spi-nor on Macchiatobin.

spi-nor is a particularly problematic case for this, it only lists a
single generic DT compatible jedec,spi-nor in the driver but supports a
huge raft of device specific compatibles, with a large set of part
numbers many of which are offered by multiple vendors.  Russell's
searches of upstream device trees has turned up examples with vendor
names written in non-standard ways too.  To make matters worse up until
8ff16cf77c ("Documentation: devicetree: m25p80: add "nor-jedec"
binding") the generic compatible was not part of the binding so there
are device trees out there written to that binding version which don't
list it all.  The sheer number of parts supported together with our
previous approach of ignoring the vendor ID makes robustly fixing this
by adding compatibles to the spi-nor driver seem problematic, the
current DT binding document does not list all the parts supported by the
driver at the minute (further patches will fix this).

I've also investigated supporting both formats of modalias
simultaneously but that doesn't seem possible, especially without
breaking our userspace ABI which is obviously not viable.

Instead revert the relevant changes for now:

e09f2ab8ee ("spi: update modalias_show after of_device_uevent_modalias support")
3ce6c9e261 ("spi: add of_device_uevent_modalias support")

This will unfortunately mean that any system which had started having
modules autoload based on the OF compatibles for drivers that list
things there but not in the spi_device_ids will now not have those
modules load which is itself a regression.  Since it affects a narrower
time window and the particularly problematic spi-nor driver may be
critical to system boot on smaller systems this seems the best of a
series of bad options.  I will start an audit of SPI drivers to identify
and fix cases where things won't autoload using spi_device_id, this is
not great but seems to be the best way forward that anyone has been able
to identify.

Thanks to Russell for both his report and the additional diagnostic and
analysis work he has done here, the detailed research above was his
work.

Fixes: e09f2ab8ee ("spi: update modalias_show after of_device_uevent_modalias support")
Fixes: 3ce6c9e261 ("spi: add of_device_uevent_modalias support")
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
2021-09-21 20:22:48 +01:00
Rob Herring
9ae54ce551 kbuild: Enable dtc 'unit_address_format' warning by default
With all the 'unit_address_format' warnings fixed, enable the warning by
default.

Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210913192816.1225025-9-robh@kernel.org
2021-09-21 14:19:21 -05:00
Chuanjia Liu
c99c4733d2 arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622
There are two independent PCIe controllers in MT2712 and MT7622
platform. Each of them should contain an independent MSI domain.

In old dts architecture, MSI domain will be inherited from the root
bridge, and all of the devices will share the same MSI domain.
Hence that, the PCIe devices will not work properly if the irq number
which required is more than 32.

Split the PCIe node for MT2712 and MT7622 platform to comply with
the hardware design and fix MSI issue.

Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/20210823032800.1660-6-chuanjia.liu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-21 20:41:43 +02:00
Chuanjia Liu
adfaea2387 ARM: dts: mediatek: Update MT7629 PCIe node for new format
To match the new dts binding. Remove "subsys",unused
interrupt and slot node.Add "interrupt-names",
"linux,pci-domain" and pciecfg node.

Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/20210823032800.1660-7-chuanjia.liu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-21 20:41:32 +02:00
Arnaldo Carvalho de Melo
4122c9c3f0 Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes in the last pushed perf/urgent.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-21 15:35:47 -03:00
Lukas Bulwahn
56cd47b470 MAINTAINERS: fix typo in DRM DRIVER FOR SAMSUNG S6D27A1 PANELS
Commit ebd8cbf1fb ("drm/panel: s6d27a1: Add driver for Samsung S6D27A1
display panel") introduces a new section DRM DRIVER FOR SAMSUNG S6D27A1
PANELS with a minor typo in one of its file entries.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:

  warning: no file matches  F:  driver/gpu/drm/panel/panel-samsung-s6d27a1.c

So, repair the entry and make get_maintainer.pl happy.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921122146.13132-1-lukas.bulwahn@gmail.com
2021-09-21 20:12:18 +02:00
Tom Rini
c9dcc63e23 docs: dt: submitting-patches: Add note about other project usage
In an attempt to make it more broadly known that other projects are
equal consumers / users of the device tree bindings, add a note to
submitting patches to say that extra care and consideration may need to
be taken when updating existing bindings.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20210910142419.5237-1-trini@konsulko.com
Signed-off-by: Rob Herring <robh@kernel.org>
2021-09-21 12:59:15 -05:00
Namjae Jeon
9f6323311c ksmbd: add default data stream name in FILE_STREAM_INFORMATION
Windows client expect to get default stream name(::DATA) in
FILE_STREAM_INFORMATION response even if there is no stream data in file.
This patch fix update failure when writing ppt or doc files.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-21 12:53:23 -05:00
Steve French
e44fd5081c ksmbd: log that server is experimental at module load
While we are working through detailed security reviews
of ksmbd server code we should remind users that it is an
experimental module by adding a warning when the module
loads.  Currently the module shows as experimental
in Kconfig and is disabled by default, but we don't want
to confuse users.

Although ksmbd passes a wide variety of the
important functional tests (since initial focus had
been largely on functional testing such as smbtorture,
xfstests etc.), and ksmbd has added key security
features (e.g. GCM256 encryption, Kerberos support),
there are ongoing detailed reviews of the code base
for path processing and network buffer decoding, and
this patch reminds users that the module should be
considered "experimental."

Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-21 12:35:20 -05:00
Cristian Marussi
0e3dbf765f kselftest/arm64: signal: Skip tests if required features are missing
During initialization of a signal testcase, features declared as required
are properly checked against the running system but no action is then taken
to effectively skip such a testcase.

Fix core signals test logic to abort initialization and report such a
testcase as skipped to the KSelfTest framework.

Fixes: f96bf43403 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-21 18:12:03 +01:00
Takashi Sakamoto
cb1bcf5ed5 ALSA: firewire-motu: fix truncated bytes in message tracepoints
In MOTU protocol v2/v3, first two data chunks across 2nd and 3rd data
channels includes message bytes from device. The total size of message
is 48 bits per data block.

The 'data_block_message' tracepoints event produced by ALSA firewire-motu
driver exposes the sequence of messages to userspace in 64 bit storage,
however lower 32 bits are actually available since current implementation
truncates 16 bits in upper of the message as a result of bit shift
operation within 32 bit storage.

This commit fixes the bug by perform the bit shift in 64 bit storage.

Fixes: c6b0b9e65f ("ALSA: firewire-motu: add tracepoints for messages for unique protocol")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210920110734.27161-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-09-21 18:48:32 +02:00
Takashi Iwai
77ff9e7be0 ASoC: Fixes for v5.15
A crop of mostly device specific fixes that have been applied since
 the merge window, nothing particularly standout here.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFIe80ACgkQJNaLcl1U
 h9DaFAf6A4VlW7tUXJE+JP7eQGEjxhep84wDnSWJDGFccdbGINVumBTmirzutguU
 dhq0NRCZgSDfBqKKP7f6l27yc/2Ei35wN7yK2VzIIdtqtcZ+Ho3ipFpvdqDyzbuf
 DriMTP83qEs9AJve+GMePwB8aUyGj7QKjkIHXj65FsLI+c2KBQkNf127ydwd4faq
 UrFCuYrs11bD0ohx8GDDbdsmz2jriUZBfaesPwuzfy/O/59caaKqt9Uq1qUxqOJ7
 3Gx1xB3mBhg005dezHgAED9coFW2TSAetIcEMnPrHBqzx8MB6DomcK1+Y8pRbekC
 4NoZrRxuTm2o5TGEwi/XPlCnSb7CAw==
 =29Gi
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v5.15-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.15

A crop of mostly device specific fixes that have been applied since
the merge window, nothing particularly standout here.
2021-09-21 18:42:14 +02:00
Sameer Pujar
013148fe7f
ASoC: Fix warning related to 'sound-name-prefix' binding
commit 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
added name-prefix.yaml schema and the same reference was used in couple
of other schemas. But this is causing following warning and the same is
fixed in current patch.

 Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
 audio-codec@34: 'sound-name-prefix' does not match any of the regexes:
 'pinctrl-[0-9]+'
  From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
 Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
 audio-codec@36: 'sound-name-prefix' does not match any of the regexes:
 'pinctrl-[0-9]+'
  From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml

Fixes: 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
Reported-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1632238860-16947-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-21 17:39:11 +01:00
Len Baker
f02f2f1bf9 ALSA: usx2y: Prefer struct_size over open coded arithmetic
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

In this case this is not actually dynamic size: all the operands
involved in the calculation are constant values. However it is better to
refactor this anyway, just to keep the open-coded math idiom out of
code.

So, use the struct_size() helper to do the arithmetic instead of the
argument "size + size * count" in the kzalloc() function.

Also, take the opportunity to refactor the declaration variables to make
it more easy to read.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210919133727.44694-1-len.baker@gmx.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-09-21 18:38:11 +02:00
Linus Torvalds
92477dd1fa s390 eBPF JIT miscompilation issues fixes.
These issues can be used by an unprivileged local user to circumvent the verifier and gain root privileges.
 
 v4.1+
 s390/bpf: Fix optimizing out zero-extensions
 s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
 v5.5+
 s390/bpf: Fix branch shortening during codegen pass
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmFDDAoACgkQjYWKoQLX
 FBiK/ggAi9LxNSrxNI4u83PY/ubZ+13XIkB59BtvShHnzSSw/e0Sdbr7dnedljaF
 qWv9MUF9s1P88DRlXw/gHIckvIH77uvT28i5Omg6JfUnBLB0LaVC4QiwhmfbqBbV
 psew9zV1z0/2YFvagCsc/XdF4QdlyLm3GKO/bEAeFXG/jDigkzBVB3clffIv7zm7
 mD4uXgELil8PNv9tliRonUwoGG5P+0tF7KviTxi3aU7NLXtZxJ1Qt0N+HjRaDpwR
 kxvSaukn61yWafUWlgbmGL8HGqhFqCk4SQzHSAZ8m87dl6KjxDiQUjvccn5xQPF2
 M7JQU7INFApvK2QZFgW66jnTeqvUcQ==
 =Qmcn
 -----END PGP SIGNATURE-----

Merge tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 eBPF fixes from Vasily Gorbik:
 "Johan Almbladh has implemented a number of new testcases for eBPF [1],
  which uncovered three miscompilation issues in the s390 eBPF JIT"

Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/ [1]

* tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/bpf: Fix optimizing out zero-extensions
  s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
  s390/bpf: Fix branch shortening during codegen pass
2021-09-21 09:36:11 -07:00
Mauro Carvalho Chehab
ca8e055c22 scripts: get_abi.pl: add a graph to speedup the undefined algorithm
Searching for symlinks is an expensive operation with the current
logic, as it is at the order of O(n^3). In practice, running the
check spends 2-3 minutes to check all symbols.

Fix it by storing the directory tree into a graph, and using
a Breadth First Search (BFS) to find the links for each sysfs node.

With such improvement, it can now report issues with ~11 seconds
on my machine.

It comes with a price, though: there are more symbols reported
as undefined after this change. I suspect it is due to some
sysfs circular loops that are dropped by BFS. Despite such
increase, it seems that the reports are now more coherent.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/f5c1e7b14a27132821c08f0459ba9aea3ed69028.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 18:32:53 +02:00
Mauro Carvalho Chehab
0b87a1b81b scripts: get_abi.pl: Ignore fs/cgroup sysfs nodes earlier
In order to speedup the parser and store less data, handle
fs/cgroup exceptions a lot earlier.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/caa37831c9e02ae58677d1515ed7cee94f52ea9d.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 18:32:53 +02:00
Mauro Carvalho Chehab
50116aec11 scripts: get_abi.pl: don't skip what that ends with wildcards
The search algorithm used inside check_undefined_symbols
has an optimization: it seeks only whats that have the same
leave name. This helps not only to speedup the search, but
it also allows providing a hint about a partial match.

There's a drawback, however: when "what:" finishes with a
wildcard, the logic will skip the what, reporting it as
"not found".

Fix it by grouping the remaining cases altogether, and
disabing any hints for such cases.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/79ba5139643355230e3bba136b20991cfc92020f.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 18:32:53 +02:00
Mauro Carvalho Chehab
14c942578e scripts: get_abi.pl: add an option to filter undefined results
The output of this script can be too big. Add an option to
filter out results, in order to help finding issues at the
ABI files.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/7b56c10195bb5e5dfd8b5838a3db8d361231d884.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 18:32:53 +02:00
Mauro Carvalho Chehab
ab02c5150b scripts: get_abi.pl: detect softlinks
The way sysfs works is that the same leave may be present under
/sys/devices, /sys/bus and /sys/class, etc, linked via soft
symlinks.

To make it harder to parse, the ABI definition usually refers
only to one of those locations.

So, improve the logic in order to retrieve the symlinks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/77c49f7d158d88e17f18d40652b75cdde9e179eb.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 18:32:53 +02:00
Mauro Carvalho Chehab
f090db4395 scripts: get_abi.pl: Check for missing symbols at the ABI specs
Check for the symbols that exists under /sys but aren't
defined at Documentation/ABI.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/958e4f3a319148af6d847c0df95e35426f9c4c5f.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 18:32:53 +02:00
Mauro Carvalho Chehab
ab9c14805b scripts: get_abi.pl: Better handle multiple What parameters
Using a comma here is problematic, as some What: expressions
may already contain a comma. So, use \xac character instead.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e83e7ffaf3429f8dfca00d1d01653ecfa36f6119.1631957565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-21 18:32:53 +02:00