Coverity warns of an unused value in arch_scale_freq_tick():
CID 100778 (#1 of 1): Unused value (UNUSED_VALUE)
assigned_value: Assigning value 1024ULL to freq_scale here, but that stored
value is overwritten before it can be used.
It was introduced by commit:
e2b0d619b4 ("x86, sched: check for counters overflow in frequency invariant accounting")
Remove the variable initializer.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lkml.kernel.org/r/20210910184405.24422-1-tim.gardner@canonical.com
- Prevent intel_pstate from avoiding to use HWP, even if instructed
to do so via the kernel command line, when HWP has been enabled
already by the platform firmware (Doug Smythies).
- Prevent use-after-free from occurring in the schedutil cpufreq
governor on exit by fixing a core helper function that attempts
to access memory associated with a kobject after calling
kobject_put() on it (James Morse).
-----BEGIN PGP SIGNATURE-----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=ytGW
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the intel_pstate driver and one
in the core.
Specifics:
- Prevent intel_pstate from avoiding to use HWP, even if instructed
to do so via the kernel command line, when HWP has been enabled
already by the platform firmware (Doug Smythies).
- Prevent use-after-free from occurring in the schedutil cpufreq
governor on exit by fixing a core helper function that attempts to
access memory associated with a kobject after calling kobject_put()
on it (James Morse)"
* tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory
cpufreq: intel_pstate: Override parameters if HWP forced by BIOS
- page align size in sparc32 arch_dma_alloc (Andreas Larsson)
- tone down a new dma-debug message (Hamza Mahfooz)
- fix the kerneldoc for dma_map_sg_attrs (me)
-----BEGIN PGP SIGNATURE-----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=ysLN
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- page align size in sparc32 arch_dma_alloc (Andreas Larsson)
- tone down a new dma-debug message (Hamza Mahfooz)
- fix the kerneldoc for dma_map_sg_attrs (me)
* tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping:
sparc32: page align size in arch_dma_alloc
dma-debug: prevent an error message from causing runtime problems
dma-mapping: fix the kerneldoc for dma_map_sg_attrs
72165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
create a new macro and set of functions for this different process type.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210917181551.2836036-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Kuv9
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Defer VPD sizing until we actually need the contents; fixes a
boot-time slowdown reported by Dave Jones (Bjorn Helgaas)
- Stop clobbering OF fwnodes when we look for an ACPI fwnode; fixes a
virtio-iommu boot regression (Jean-Philippe Brucker)
- Add AMD GPU multi-function power dependencies; fixes runtime power
management, including GPU resume and temp and fan sensor issues (Evan
Quan)
- Update VMD maintainer to Nirmal Patel (Jon Derrick)
* tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Add Nirmal Patel as VMD maintainer
PCI: Add AMD GPU multi-function power dependencies
PCI/ACPI: Don't reset a fwnode set by OF
PCI/VPD: Defer VPD sizing until first access
add '__iomem' for ioremap() and '__user' for copy_to_user().
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0
rather than error, because the retval is not changed after KMEM_CACHE or
maple_alloc_dev failed.
Fixes: 17be2d2b1c ("sh: Add maple bus support for the SEGA Dreamcast.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Even if none of source code is updated, the following are every time
rebuilt:
CC arch/sh/boot/compressed/cache.o
SHIPPED arch/sh/boot/compressed/ashiftrt.S
AS arch/sh/boot/compressed/ashiftrt.o
SHIPPED arch/sh/boot/compressed/ashldi3.c
CC arch/sh/boot/compressed/ashldi3.o
SHIPPED arch/sh/boot/compressed/ashrsi3.S
AS arch/sh/boot/compressed/ashrsi3.o
SHIPPED arch/sh/boot/compressed/ashlsi3.S
AS arch/sh/boot/compressed/ashlsi3.o
SHIPPED arch/sh/boot/compressed/lshrsi3.S
AS arch/sh/boot/compressed/lshrsi3.o
LD arch/sh/boot/compressed/vmlinux
OBJCOPY arch/sh/boot/zImage
Add build artifacts to 'targets' as needed.
I turned the library files to check-in files. It is simpler than
copying from arch/sh/lib/ at build-time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
You do not need to build all of vmlinux.bin*
They are built on demand as prerequsites of uImage.bin*, hence should
be added to targets instead of extra-y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
The word 'swtich' is wrong, so fix it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
request_irq is marked __must_check, but the call in shx3_prepare_cpus
has a void return type, so it can't propagate failure to the caller.
Follow cues from hexagon and just print an error.
Fixes: c7936b9abc ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.")
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Rich Felker <dalias@libc.org>
Trivial misannotations in
* get_user() (__gu_addr is a userland pointer there)
* ip_fast_csum() (sum is __wsum, not unsigned int)
* csum_and_copy_to_user() (destination is void *, not const void * -
mea culpa)
* __clear_user() (to is a userland pointer)
* several places in kernel/traps_32.c (regs->pc is a userland pointer
when regs is a userland pt_regs)
* math-emu/math.c: READ() and WRITE() casts of address should be to
userland pointer.
No changes in code generation and those take care of the majority of
noise from sparse on sh builds.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Wa_16014451276 fixes the starting coordinate for PSR2 selective
updates. CHICKEN_TRANS definition of the workaround bit has a wrong
name based on workaround definition and HSD.
Wa_14014971508 allows the screen to continue to be updated when
coming back from DC5/DC6 and SF_SINGLE_FULL_FRAME bit is not kept
set in PSR2_MAN_TRK_CTL.
Wa_16012604467 fixes underruns when exiting PSR2 when it is in one
of its internal states.
Wa_14014971508 is still in pending status in BSpec but by
the time this is reviewed and ready to be merged it will be finalized.
v2:
- renamed register to ADLP_1_BASED_X_GRANULARITY
- added comment about all ADL-P supported panels being 1 based X
granularity
BSpec: 54369
BSpec: 50054
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-5-jose.souza@intel.com
drm_atomic_helper_damage_iter_init() + drm_atomic_for_each_plane_damage()
returns the full plane area in case no damaged area was set by
userspace or it was discarted by driver.
This is important to fix the rendering of userspace applications that
does frontbuffer rendering and notify driver about dirty areas but do
not set any dirty clips.
With this we don't need to worry about to check and mark the whole
area as damaged in page flips.
Another important change here is the move of
drm_atomic_add_affected_planes() call, it needs to called late
otherwise the area of all the planes would be added to pipe_clip and
not saving power.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-4-jose.souza@intel.com
Not sure why but when moving the cursor fast it causes some artifacts
of the cursor to be left in the cursor path, adding some pixels above
the cursor to the damaged area fixes the issue, so leaving this as a
workaround until proper fix is found.
This is reproducile on TGL and ADL-P.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-3-jose.souza@intel.com
BSpec states that the minimum number of frames before selective update
is 2, so making sure this minimum limit is fulfilled.
BSpec: 50422
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-2-jose.souza@intel.com
Clang warns twice:
drivers/ptp/ptp_ocp.c:2065:16: error: operator '?:' has lower precedence
than '&'; '&' will be evaluated first
[-Werror,-Wbitwise-conditional-parentheses]
on & map ? " ON" : "OFF", src);
~~~~~~~~ ^
drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '&'
expression to silence this warning
on & map ? " ON" : "OFF", src);
^
( )
drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '?:'
expression to evaluate it first
on & map ? " ON" : "OFF", src);
^
on and map are both booleans so this should be a logical AND, which
clears up the operator precedence issue.
Fixes: a62a56d04e ("ptp: ocp: Enable 4th timestamper / PPS generator")
Link: https://github.com/ClangBuiltLinux/linux/issues/1457
Suggested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20210917045204.1385801-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not uncommon where __btrfs_dump_space_info() gets called
under over-commit situations.
In that case free space would underflow as total allocated space is not
enough to handle all the over-committed space.
Such underflow values can sometimes cause confusion for users enabled
enospc_debug mount option, and takes some seconds for developers to
convert the underflow value to signed result.
Just output the free space as s64 to avoid such problem.
Reported-by: Eli V <eliventer@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we get an error flushing one device, during a super block commit, we
record the error in the device structure, in the field 'last_flush_error'.
This is used to later check if we should error out the super block commit,
depending on whether the number of flush errors is greater than or equals
to the maximum tolerated device failures for a raid profile.
However if we get a transient device flush error, unmount the filesystem
and later try to mount it, we can fail the mount because we treat that
past error as critical and consider the device is missing. Even if it's
very likely that the error will happen again, as it's probably due to a
hardware related problem, there may be cases where the error might not
happen again. One example is during testing, and a test case like the
new generic/648 from fstests always triggers this. The test cases
generic/019 and generic/475 also trigger this scenario, but very
sporadically.
When this happens we get an error like this:
$ mount /dev/sdc /mnt
mount: /mnt wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error.
$ dmesg
(...)
[12918.886926] BTRFS warning (device sdc): chunk 13631488 missing 1 devices, max tolerance is 0 for writable mount
[12918.888293] BTRFS warning (device sdc): writable mount is not allowed due to too many missing devices
[12918.890853] BTRFS error (device sdc): open_ctree failed
The failure happens because when btrfs_check_rw_degradable() is called at
mount time, or at remount from RO to RW time, is sees a non zero value in
a device's ->last_flush_error attribute, and therefore considers that the
device is 'missing'.
Fix this by setting a device's ->last_flush_error to zero when we close a
device, making sure the error is not seen on the next mount attempt. We
only need to track flush errors during the current mount, so that we never
commit a super block if such errors happened.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a verity rollback, if we fail to update the inode or delete the
orphan, we abort the transaction and return without releasing our
transaction handle. Fix that by releasing the handle.
Fixes: 146054090b ("btrfs: initial fsverity support")
Fixes: 705242538f ("btrfs: verity metadata orphan items")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a BUG_ON() in btrfs_csum_one_bio() to catch code logic error.
It has indeed caught several bugs during subpage development.
But the BUG_ON() itself will bring down the whole system which is
an overkill.
Replace it with a WARN() and exit gracefully, so that it won't crash the
whole system while we can still catch the code logic error.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=TnwU
-----END PGP SIGNATURE-----
Merge tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull io_uring iov_iter retry fixes from Jens Axboe:
"This adds a helper to save/restore iov_iter state, and modifies
io_uring to use it.
After that is done, we can now kill the iter->truncated addition that
we added for this release. The io_uring change is being overly
cautious with the save/restore/advance, but better safe than sorry and
we can always improve that and reduce the overhead if it proves to be
of concern. The only case to be worried about in this regard is huge
IO, where iteration can take a while to iterate segments.
I spent some time writing test cases, and expanded the coverage quite
a bit from the last posting of this. liburing carries this regression
test case now:
https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c
which exercises all of this. It now also supports provided buffers,
and explicitly tests for end-of-file/device truncation as well.
On top of that, Pavel sanitized the IOPOLL retry path to follow the
exact same pattern as normal IO"
* tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
io_uring: move iopoll reissue into regular IO path
Revert "iov_iter: track truncated size"
io_uring: use iov_iter state save/restore helpers
iov_iter: add helper to save iov_iter state
-----BEGIN PGP SIGNATURE-----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=4Ipo
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Mostly fixes for regressions in this cycle, but also a few fixes that
predate this release.
The odd one out is a tweak to the direct files added in this release,
where attempting to reuse a slot is allowed instead of needing an
explicit removal of that slot first. It's a considerable improvement
in usability to that API, hence I'm sending it for -rc2.
- io-wq race fix and cleanup (Hao)
- loop_rw_iter() type fix
- SQPOLL max worker race fix
- Allow poll arm for O_NONBLOCK files, fixing a case where it's
impossible to properly use io_uring if you cannot modify the file
flags
- Allow direct open to simply reuse a slot, instead of needing it
explicitly removed first (Pavel)
- Fix a case where we missed signal mask restoring in cqring_wait, if
we hit -EFAULT (Xiaoguang)"
* tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
io_uring: allow retry for O_NONBLOCK if async is supported
io_uring: auto-removal for direct open/accept
io_uring: fix missing sigmask restore in io_cqring_wait()
io_uring: pin SQPOLL data before unlocking ring lock
io-wq: provide IO_WQ_* constants for IORING_REGISTER_IOWQ_MAX_WORKERS arg items
io-wq: fix potential race of acct->nr_workers
io-wq: code clean of io_wqe_create_worker()
io_uring: ensure symmetry in handling iter types in loop_rw_iter()
-----BEGIN PGP SIGNATURE-----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=A2Zd
-----END PGP SIGNATURE-----
Merge tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix ANA state updates when a namespace is not present (Anton
Eidelman)
- nvmet: fix a width vs precision bug in
nvmet_subsys_attr_serial_show (Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu
Li)
- blk-integrity profile registration fixes (Christoph, Lihong)
- blk-cgroup UAF fix (Li)
- blk-mq tag iterator fix (Ming)
- blkcg memory leak fix (Yanfei)
* tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
blkcg: fix memory leak in blk_iolatency_init
nvme: remove the call to nvme_update_disk_info in nvme_ns_remove
block: flush the integrity workqueue in blk_integrity_unregister
block: check if a profile is actually registered in blk_integrity_unregister
nvme-tcp: fix io_work priority inversion
nvme-rdma: destroy cm id before destroy qp to avoid use after free
nvme-multipath: fix ANA state updates when a namespace is not present
nvme: avoid race in shutdown namespace removal
nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
blk-mq: avoid to iterate over stale request
With clang building selftests/bpf, I hit a few warnings like below:
.../bpf_iter.c:592:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
__u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
^
.../bpf_iter.c:688:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
__u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
^
.../tc_redirect.c:657:6: warning: variable 'target_fd' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../tc_redirect.c:743:6: note: uninitialized use occurs here
if (target_fd >= 0)
^~~~~~~~~
Removing unused variables and initializing the previously-uninitialized variable
to ensure these warnings are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210917043343.3711917-1-yhs@fb.com
Andrii Nakryiko says:
====================
This patch set deprecates bpf_object_open_opts.attach_prog_fd (in libbpf 0.7+)
by extending bpf_program__set_attach_target() to support some more flexible
scenarios. Existing fexit_bpf2bpf selftest is updated accordingly to not use
deprecated APIs.
While at it, also deprecate no-op relaxed_core_relocs option (they are always
"relaxed").
Last patch also const-ifies all high-level libbpf attach APIs, as there is no
reason for them to assume bpf_program/bpf_map modifications.
Patch #1 also removes one more unneeded use of find_sec_def(), relying on
prog->sec_def that's set during bpf_object__open() operation, simplifying
upcoming refactoring a little bit more.
All these changes are preparatory patches before SEC() handling refactoring
that will come next.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attach APIs shouldn't need to modify bpf_program/bpf_map structs, so
change all struct bpf_program and struct bpf_map pointers to const
pointers. This is completely backwards compatible with no functional
change.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-8-andrii@kernel.org
bpf_object_open_opts.attach_prog_fd makes a pretty strong assumption
that bpf_object contains either only single freplace BPF program or all
of BPF programs in BPF object are freplaces intended to replace
different subprograms of the same target BPF program. This seems both
a bit confusing, too assuming, and limiting.
We've had bpf_program__set_attach_target() API which allows more
fine-grained control over this, on a per-program level. As such, mark
open_opts.attach_prog_fd as deprecated starting from v0.7, so that we
have one more universal way of setting freplace targets. With previous
change to allow NULL attach_func_name argument, and especially combined
with BPF skeleton, arguable bpf_program__set_attach_target() is a more
convenient and explicit API as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-7-andrii@kernel.org
Switch fexit_bpf2bpf selftest to bpf_program__set_attach_target()
instead of using bpf_object_open_opts.attach_prog_fd, which is going to
be deprecated. These changes also demonstrate the new mode of
set_attach_target() in which it allows NULL when the target is BPF
program (attach_prog_fd != 0).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-6-andrii@kernel.org
Allow to use bpf_program__set_attach_target to only set target attach
program FD, while letting libbpf to use target attach function name from
SEC() definition. This might be useful for some scenarios where
bpf_object contains multiple related freplace BPF programs intended to
replace different sub-programs in target BPF program. In such case all
programs will have the same attach_prog_fd, but different
attach_func_name. It's convenient to specify such target function names
declaratively in SEC() definitions, but attach_prog_fd is a dynamic
runtime setting.
To simplify such scenario, allow bpf_program__set_attach_target() to
delay BTF ID resolution till the BPF program load time by providing NULL
attach_func_name. In that case the behavior will be similar to using
bpf_object_open_opts.attach_prog_fd (which is marked deprecated since
v0.7), but has the benefit of allowing more control by user in what is
attached to what. Such setup allows having BPF programs attached to
different target attach_prog_fd with target functions still declaratively
recorded in BPF source code in SEC() definitions.
Selftests changes in the next patch should make this more obvious.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-5-andrii@kernel.org
It's relevant and hasn't been doing anything for a long while now.
Deprecated it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-4-andrii@kernel.org
relaxed_core_relocs option hasn't had any effect for a while now, stop
specifying it. Next patch marks it as deprecated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-3-andrii@kernel.org
Don't perform another search for sec_def inside
libbpf_find_attach_btf_id(), as each recognized bpf_program already has
prog->sec_def set.
Also remove unnecessary NULL check for prog->sec_name, as it can never
be NULL.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-2-andrii@kernel.org
- Fix the memset() size when re-initialising the SVE state.
- Mark __stack_chk_guard as __ro_after_init.
- Remove duplicate include.
-----BEGIN PGP SIGNATURE-----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=WVRd
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes and cleanups from Catalin Marinas:
- Fix the memset() size when re-initialising the SVE state.
- Mark __stack_chk_guard as __ro_after_init.
- Remove duplicate include.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Mark __stack_chk_guard as __ro_after_init
arm64/kernel: remove duplicate include in process.c
arm64/sve: Use correct size when reinitialising SVE state
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYUR8DAAKCRCAXGG7T9hj
vjclAP0ekisZSabOsmzM0iz8rpuYj113/kQozokFeFD5eQlEiAD/b5LytLosic/1
5XKa5fbOyimAyRBwblWhpLLhrW6uiAg=
=WoAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- The first hunk of a Xen swiotlb fixup series fixing multiple minor
issues and doing some small cleanups
- Some further Xen related fixes avoiding WARN() splats when running as
Xen guests or dom0
- A Kconfig fix allowing the pvcalls frontend to be built as a module
* tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
swiotlb-xen: drop DEFAULT_NSLABS
swiotlb-xen: arrange to have buffer info logged
swiotlb-xen: drop leftover __ref
swiotlb-xen: limit init retries
swiotlb-xen: suppress certain init retries
swiotlb-xen: maintain slab count properly
swiotlb-xen: fix late init retry
swiotlb-xen: avoid double free
xen/pvcalls: backend can be a module
xen: fix usage of pmd_populate in mremap for pv guests
xen: reset legacy rtc flag for PV domU
PM: base: power: don't try to use non-existing RTC for storing data
xen/balloon: use a kernel thread instead a workqueue
Finally struct _io_ops is unused, so remove it.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-15-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are only unused functions and macros and one function which can be
open-coded.
So, removed core/rtw_io.c at all, removed core/rtw_io.c from Makefile
and open-coded rtw_init_io_priv
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-14-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_write_port_cancel() and usb_write_port_cancel()
and embed their code into the caller (i.e., rtw_write_port_cancel()).
_rtw_write_port_cancel() is a mere redefinition of rtw_write_port_cancel()
and it is unneeded. usb_write_port_cancel() was the only functions
assigned to the (*_usb_write_port_cancel) pointer, so we can simply remove
it and make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-13-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_read_port_cancel() and usb_read_port_cancel()
and embed their code into the caller (i.e., rtw_read_port_cancel()).
_rtw_read_port_cancel() is a mere redefinition of rtw_read_port_cancel()
and it is unneeded. usb_read_port_cancel() was the only functions assigned
to the (*_usb_read_port_cancel) pointer, so we can simply remove it and
make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-12-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_write_port() and usb_write_port() and embed
their code into the caller (i.e., rtw_write_port()).
_rtw_write_port() is a mere redefinition of rtw_write_port() and it is
unneeded. usb_write_port() was the only functions assigned to the
(*_usb_write_port) pointer, so we can simply remove it and make a direct
call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-11-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_read_port() and usb_read_port() and embed their
code into the caller (i.e., rtw_read_port()).
_rtw_read_port() is a mere redefinition of rtw_read_port() and it is
unneeded. usb_read_port() was the only functions assigned to the
(*_usb_read_port) pointer, so we can simply remove it and make a direct
call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-10-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_writeN() and usb_writeN() and embed their
code into the caller (i.e., rtw_writeN()).
_rtw_writeN() is a mere redefinition of rtw_writeN() and it is unneeded.
usb_writeN() was the only functions assigned to the (*_usb_writeN) pointer,
so we can simply remove it and make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-9-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_write32() and usb_write32() and embed their
code into the caller (i.e., rtw_write32()).
_rtw_write32() is a mere redefinition of rtw_write32() and it is unneeded.
usb_write32() was the only functions assigned to the (*_usb_write32)
pointer, so we can simply remove it and make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-8-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_write16() and usb_write16() and embed their
code into the caller (i.e., rtw_write16()).
_rtw_write16() is a mere redefinition of rtw_write16() and it is unneeded.
usb_write16() was the only functions assigned to the (*_usb_write16)
pointer, so we can simply remove it and make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-7-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the back channel enters SEQ4_STATUS_CB_PATH_DOWN state, the client
recovers by sending BIND_CONN_TO_SESSION but the server fails to recover
the back channel and leaves it as NFSD4_CB_DOWN.
Fix by enhancing nfsd4_bind_conn_to_session to probe the back channel
by calling nfsd4_probe_callback.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Dai Ngo reports that, since the XDR overhaul, the NLM server crashes
when the TEST procedure wants to return NLM_DENIED. There is a bug
in svcxdr_encode_owner() that none of our standard test cases found.
Replace the open-coded function with a call to an appropriate
pre-fabricated XDR helper.
Reported-by: Dai Ngo <Dai.Ngo@oracle.com>
Fixes: a6a63ca565 ("lockd: Common NLM XDR helpers")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Remove the unnecessary _rtw_write8() and usb_write8() and embed their
code into the caller (i.e., rtw_write8()).
_rtw_write8() is a mere redefinition of rtw_write8() and it is unneeded.
usb_write8() was the only functions assigned to the (*_usb_write8) pointer,
so we can simply remove it and make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-6-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_readr32() and usb_read32() and embed their
code into the caller (i.e., rtw_read32()).
_rtw_read32() is a mere redefinition of rtw_read32() and it is unneeded.
usb_read32() was the only functions assigned to the (*_usb_read32) pointer,
so we can simply remove it and make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-5-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary _rtw_read16() and usb_read16() and embed their
code into the caller (i.e., rtw_read16()).
_rtw_read16() is a mere redefinition of rtw_read16() and it is unneeded.
usb_read16() was the only functions assigned to the (*_usb_read16) pointer,
so we can simply remove it and make a direct call.
This patch is in preparation for the _io_ops structure removal.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210917071837.10926-4-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>