Commit graph

1,089,026 commits

Author SHA1 Message Date
James Smart
315b3fd135 scsi: lpfc: Improve PBDE checks during SGL processing
The PBDE feature, setting payload buffer address explicitly in the WQE so
it doesn't have to be fetched from the SGL, only makes sense when there is
a single buffer for the I/O. When there are multiple buffers it actually
hurts performance as the SGL subsequently has to be fetched.

Rework the SGL logic to only use PBDE when a single buffer.

Link: https://lore.kernel.org/r/20210910233159.115896-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:22 -04:00
James Smart
afd63fa511 scsi: lpfc: Zero CGN stats only during initial driver load and stat reset
Currently congestion management framework results are cleared whenever the
framework settings changed (such as it being turned off then back on). This
unfortunately means prior stats, rolled up to higher time windows lose
meaning.

Change such that stats are not cleared. Thus they pause and resume with
prior values still being considered.

Link: https://lore.kernel.org/r/20210910233159.115896-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
3ea998cbf9 scsi: lpfc: Fix I/O block after enabling managed congestion mode
If the congestion management framework dynamically enables, it may do so
while I/O is in flight. The updates of cmf info due to inflight I/O
completing may happen before values have been initialized.

Fix by ensure cmf_max_bytes_per_interval is initialized when checking
bandwidth utilization for SCSI layer blocking.

Link: https://lore.kernel.org/r/20210910233159.115896-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
d5ac69b332 scsi: lpfc: Adjust bytes received vales during cmf timer interval
The newly added congestion mgmt framework is seeing unexpected congestion
FPINs and signals.  In analysis, time values given to the adapter are not
at hard time intervals. Thus the drift vs the transfer count seen is
affecting how the framework manages things.

Adjust counters to cover the drift.

Link: https://lore.kernel.org/r/20210910233159.115896-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
25ac2c970b scsi: lpfc: Fix EEH support for NVMe I/O
Injecting errors on the PCI slot while the driver is handling NVMe I/O will
cause crashes and hangs.

There are several rather difficult scenarios occurring. The main issue is
that the adapter can report a PCI error before or simultaneously to the PCI
subsystem reporting the error. Both paths have different entry points and
currently there is no interlock between them. Thus multiple teardown paths
are competing and all heck breaks loose.

Complicating things is the NVMs path. To a large degree, I/O was able to be
shutdown for a full FC port on the SCSI stack. But on NVMe, there isn't a
similar call. At best, it works on a per-controller basis, but even at the
controller level, it's a controller "reset" call. All of which means I/O is
still flowing on different CPUs with reset paths expecting hw access
(mailbox commands) to execute properly.

The following modifications are made:

 - A new flag is set in PCI error entrypoints so the driver can track being
   called by that path.

 - An interlock is added in the SLI hw error path and the PCI error path
   such that only one of the paths proceeds with the teardown logic.

 - RPI cleanup is patched such that RPIs are marked unregistered w/o mbx
   cmds in cases of hw error.

 - If entering the SLI port re-init calls, a case where SLI error teardown
   was quick and beat the PCI calls now reporting error, check whether the
   SLI port is still live on the PCI bus.

 - In the PCI reset code to bring the adapter back, recheck the IRQ
   settings. Different checks for SLI3 vs SLI4.

 - In I/O completions, that may be called as part of the cleanup or
   underway just before the hw error, check the state of the adapter.  If
   in error, shortcut handling that would expect further adapter
   completions as the hw error won't be sending them.

 - In routines waiting on I/O completions, which may have been in progress
   prior to the hw error, detect the device is being torn down and abort
   from their waits and just give up. This points to a larger issue in the
   driver on ref-counting for data structures, as it doesn't have
   ref-counting on q and port structures. We'll do this fix for now as it
   would be a major rework to be done differently.

 - Fix the NVMe cleanup to simulate NVMe I/O completions if I/O is being
   failed back due to hw error.

 - In I/O buf allocation, done at the start of new I/Os, check hw state and
   fail if hw error.

Link: https://lore.kernel.org/r/20210910233159.115896-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
cd8a36a90b scsi: lpfc: Fix FCP I/O flush functionality for TMF routines
A prior patch inadvertently caused lpfc_sli_sum_iocb() to exclude counting
of outstanding aborted I/Os and ABORT IOCBs.  Thus,
lpfc_reset_flush_io_context() called from any TMF routine does not properly
wait to flush all outstanding FCP IOCBs leading to a block layer crash on
an invalid scsi_cmnd->request pointer.

  kernel BUG at ../block/blk-core.c:1489!
  RIP: 0010:blk_requeue_request+0xaf/0xc0
  ...
  Call Trace:
  <IRQ>
  __scsi_queue_insert+0x90/0xe0 [scsi_mod]
  blk_done_softirq+0x7e/0x90
  __do_softirq+0xd2/0x280
  irq_exit+0xd5/0xe0
  do_IRQ+0x4c/0xd0
  common_interrupt+0x87/0x87
  </IRQ>

Fix by separating out the LPFC_IO_FCP, LPFC_IO_ON_TXCMPLQ,
LPFC_DRIVER_ABORTED, and CMD_ABORT_XRI_CN || CMD_CLOSE_XRI_CN checks into a
new lpfc_sli_validate_fcp_iocb_for_abort() routine when determining to
build an ABORT iocb.

Restore lpfc_reset_flush_io_context() functionality by including counting
of outstanding aborted IOCBs and ABORT IOCBs in lpfc_sli_sum_iocb().

Link: https://lore.kernel.org/r/20210910233159.115896-9-jsmart2021@gmail.com
Fixes: e136471135 ("scsi: lpfc: Fix illegal memory access on Abort IOCBs")
Cc: <stable@vger.kernel.org> # v5.12+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
b507357f79 scsi: lpfc: Fix NVMe I/O failover to non-optimized path
Currently, we hold off unregistering with NVMe transport layer until GID_FT
or ADISC completes upon receipt of RSCN. In the ADISC discovery routine,
for nodes not found in the GID_FT response, the nodes are unregistered from
the SCSI transport but not UNREG_RPI'd. Meaning outstanding WQEs continue
to be outstanding and were not failed back to the OS. If an NVMe device,
this mean there wasn't initial termination of the I/Os so they could be
issued on a different NVMe path.

Fix by unregistering the RPI so that I/O is cancelled.

Link: https://lore.kernel.org/r/20210910233159.115896-8-jsmart2021@gmail.com
Fixes: 0614568361 ("scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
a864ee709b scsi: lpfc: Don't remove ndlp on PRLI errors in P2P mode
In pt-2-pt mode, the initiator does not log into the target after a PRLI
error.  In pt-2-pt mode, the target responded to the PRLI by sending a
LOGO. The LOGO causes all ELS and I/Os to be aborted. This caused the PRLI
to fail. The PRLI completion path caused the discovery node to be dropped
to avoid being stick in an UNUSED (not logged in) state. As the node was
dropped there is no retry of the login and as it is pt-2-pt, there is no
RSCN to retrigger discovery. Thus the other end is not seen by the OS.

Fix by ensuring the discovery node is not dropped if connecting pt-2-pt.
This will cause PLOGI to be retried.

Link: https://lore.kernel.org/r/20210910233159.115896-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
3a874488d2 scsi: lpfc: Fix rediscovery of tape device after LIP
On link up and node discovery, a remote port is registered with the SCSI
transport and the driver sets fc4_xpt_flags to track transport
registration.

A link down event causes the driver to deregister with the SCSI transport,
starting the devloss timer, and calls a local unreg routine to clear the
login state. Part of the login state is the fc4_xpt_flags.  However, with
tape devices that support sequence level error recovery, which wants to
preserve the login, the local unreg routine is skipped, thus the flags
aren't cleared.

A subsequent link up, ADISC is performed and the lpfc_nlp_reg_node()
routine is called. As the fc4_xpt_flags is not clear, it's believed the
node is already registered with the transport. Unfortunately, the
registration was already terminated. Eventually the devloss tmo timer
expires and tears down the device.

Fix by ensuring the tape device, known by the ADISC flag, is always
unregistered if the link drops.

Link: https://lore.kernel.org/r/20210910233159.115896-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
88f7702984 scsi: lpfc: Fix hang on unload due to stuck fport node
A test scenario encountered an unload hang while an FLOGI ELS was in flight
when a link down condition occurred.  The driver fails unload as it never
releases the fport node.

For most nodes, when the link drops, devloss tmo is started and the timeout
will cause the final node release. For the Fport, as it has not yet
registered with the SCSI transport, there is no devloss timer to be
started, so there is no final release.  Additionally, the link down
sequence causes ABORTS to be issued for pending ELS's. The completions from
the ABORTS perform the release of node references.  However, as the adapter
is being reset to be unloaded, those completions will never occur.

Fix by the following:

 - In the ELS cleanup, recognize when unloading and place the ELS's on a
   different list that immediately cleans up/completes the ELS's.  It's
   recognized that this condition primarily affects only the fport, with
   other ports having normal clean up logic that handles things.

 - Resolve the devloss issue by, when cleaning up nodes on after link down,
   recognizing when the fabric node does not have a completed state (its
   state is UNUSED) and removing a reference so the node can delete after
   the ELS reference is released.

Link: https://lore.kernel.org/r/20210910233159.115896-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
20d2279f90 scsi: lpfc: Fix premature rpi release for unsolicited TPLS and LS_RJT
A test scenario has a target issuing a TPLS after accepting the driver's
PRLI.  TPLS is not supported by the driver so it rejects the ELS.  However,
the reject was only happening on the primary N_Port.  If the TPLS was to a
NPIV vport, not only would it reject the ELS, but it would act on the TPLS,
starting devloss, then unregister from the SCSI transport and release the
node. When devloss expired, it would access the node again and cause a page
faul.

Fix by altering the NPIV code to recognize that a correctly registered node
can reject unsolicited ELS I/O and to not unregister with the SCSI
transport and tear the node down.  Add a check of the fc4_xpt_flags so that
only a zero value allows the unreg and teardown.

Link: https://lore.kernel.org/r/20210910233159.115896-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
James Smart
982fc3965d scsi: lpfc: Don't release final kref on Fport node while ABTS outstanding
In a rarely executed path, FLOGI failure, there is a refcounting error.  If
FLOGI completed with an error, typically a timeout, the initial completion
handler would remove the job reference. However, the job completion isn't
the actual end of the job/exchange as the timeout usually initiates an
ABTS, and upon that ABTS completion, a final completion is sent. The driver
removes the reference again in the final completion. Thus the imbalance.

In the buggy cases, if there was a link bounce while the delayed response
is outstanding, the fport node may be referenced again but there was no
additional reference as it is already present. The delayed completion then
occurs and removes the last reference freeing the node and causing issues
in the link up processed that is using the node.

Fix this scenario by removing the snippet that removed the reference in the
initial FLOGI completion. The bad snippet was poorly trying to identify the
FLOGI as OK to do so by realizing the node was not registered with either
SCSI or NVMe transport.

Link: https://lore.kernel.org/r/20210910233159.115896-3-jsmart2021@gmail.com
Fixes: 618e2ee146 ("scsi: lpfc: Fix FLOGI failure due to accessing a freed node")
Cc: <stable@vger.kernel.org> # v5.13+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
James Smart
99154581b0 scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output.  The job is then added to a
completions list for cancellation.

Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter.  If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.

Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.

Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
Colin Ian King
914418f369 scsi: qla2xxx: Remove redundant initialization of pointer req
The pointer req is being initialized with a value that is never read, it is
being updated later on. The assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20210910114610.44752-1-colin.king@canonical.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
2021-09-14 23:33:20 -04:00
Nilesh Javali
b0fe235dad scsi: qla2xxx: Update version to 10.02.07.100-k
Link: https://lore.kernel.org/r/20210908164622.19240-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
Quinn Tran
3d33b303d4 scsi: qla2xxx: Fix use after free in eh_abort path
In eh_abort path driver prematurely exits the call to upper layer. Check
whether command is aborted / completed by firmware before exiting the call.

9 [ffff8b1ebf803c00] page_fault at ffffffffb0389778
  [exception RIP: qla2x00_status_entry+0x48d]
  RIP: ffffffffc04fa62d  RSP: ffff8b1ebf803cb0  RFLAGS: 00010082
  RAX: 00000000ffffffff  RBX: 00000000000e0000  RCX: 0000000000000000
  RDX: 0000000000000000  RSI: 00000000000013d8  RDI: fffff3253db78440
  RBP: ffff8b1ebf803dd0   R8: ffff8b1ebcd9b0c0   R9: 0000000000000000
  R10: ffff8b1e38a30808  R11: 0000000000001000  R12: 00000000000003e9
  R13: 0000000000000000  R14: ffff8b1ebcd9d740  R15: 0000000000000028
  ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
10 [ffff8b1ebf803cb0] enqueue_entity at ffffffffafce708f
11 [ffff8b1ebf803d00] enqueue_task_fair at ffffffffafce7b88
12 [ffff8b1ebf803dd8] qla24xx_process_response_queue at ffffffffc04fc9a6
[qla2xxx]
13 [ffff8b1ebf803e78] qla24xx_msix_rsp_q at ffffffffc04ff01b [qla2xxx]
14 [ffff8b1ebf803eb0] __handle_irq_event_percpu at ffffffffafd50714

Link: https://lore.kernel.org/r/20210908164622.19240-10-njavali@marvell.com
Fixes: f45bca8c50 ("scsi: qla2xxx: Fix double scsi_done for abort path")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Co-developed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
Manish Rangankar
3a4e1f3b3a scsi: qla2xxx: Move heartbeat handling from DPC thread to workqueue
DPC thread gets restricted due to a no-op mailbox, which is a blocking call
and has a high execution frequency. To free up the DPC thread we move no-op
handling to the workqueue. Also, modified qla_do_heartbeat() to send no-op
MBC if we don’t have any active interrupts, but there are still I/Os
outstanding with firmware.

Link: https://lore.kernel.org/r/20210908164622.19240-9-njavali@marvell.com
Fixes: d94d8158e1 ("scsi: qla2xxx: Add heartbeat check")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
Shreyas Deodhar
38c61709e6 scsi: qla2xxx: Call process_response_queue() in Tx path
Process responses in Tx path if any available for better performance.

Link: https://lore.kernel.org/r/20210908164622.19240-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
Arun Easi
3ef68d4f0c scsi: qla2xxx: Fix kernel crash when accessing port_speed sysfs file
Kernel crashes when accessing port_speed sysfs file.  The issue happens on
a CNA when the local array was accessed beyond bounds. Fix this by changing
the lookup.

BUG: unable to handle kernel paging request at 0000000000004000
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 15 PID: 455213 Comm: sosreport Kdump: loaded Not tainted
4.18.0-305.7.1.el8_4.x86_64 #1
RIP: 0010:string_nocheck+0x12/0x70
Code: 00 00 4c 89 e2 be 20 00 00 00 48 89 ef e8 86 9a 00 00 4c 01
e3 eb 81 90 49 89 f2 48 89 ce 48 89 f8 48 c1 fe 30 66 85 f6 74 4f <44> 0f b6 0a
45 84 c9 74 46 83 ee 01 41 b8 01 00 00 00 48 8d 7c 37
RSP: 0018:ffffb5141c1afcf0 EFLAGS: 00010286
RAX: ffff8bf4009f8000 RBX: ffff8bf4009f9000 RCX: ffff0a00ffffff04
RDX: 0000000000004000 RSI: ffffffffffffffff RDI: ffff8bf4009f8000
RBP: 0000000000004000 R08: 0000000000000001 R09: ffffb5141c1afb84
R10: ffff8bf4009f9000 R11: ffffb5141c1afce6 R12: ffff0a00ffffff04
R13: ffffffffc08e21aa R14: 0000000000001000 R15: ffffffffc08e21aa
FS:  00007fc4ebfff700(0000) GS:ffff8c717f7c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000004000 CR3: 000000edfdee6006 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  string+0x40/0x50
  vsnprintf+0x33c/0x520
  scnprintf+0x4d/0x90
  qla2x00_port_speed_show+0xb5/0x100 [qla2xxx]
  dev_attr_show+0x1c/0x40
  sysfs_kf_seq_show+0x9b/0x100
  seq_read+0x153/0x410
  vfs_read+0x91/0x140
  ksys_read+0x4f/0xb0
  do_syscall_64+0x5b/0x1a0
  entry_SYSCALL_64_after_hwframe+0x65/0xca

Link: https://lore.kernel.org/r/20210908164622.19240-7-njavali@marvell.com
Fixes: 4910b524ac ("scsi: qla2xxx: Add support for setting port speed")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00
Quinn Tran
527d46e0b0 scsi: qla2xxx: edif: Use link event to wake up app
Authentication application may be running and in the past tried to probe
driver (app_start) but was unsuccessful. This could be due to the bsg layer
not being ready to service the request. On a successful link up, driver
will use the netlink Link Up event to notify the app to retry the app_start
call.

In another case, app does not poll for new NPIV host. This link up event
would notify app of the presence of a new SCSI host.

Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:19 -04:00
Arun Easi
e6e22e6cc2 scsi: qla2xxx: Fix crash in NVMe abort path
System crash was seen when I/O was run against an NVMe target and aborts
were occurring.

Crash stack is:

    -- relevant crash stack --
    BUG: kernel NULL pointer dereference, address: 0000000000000010
    :
    #6 [ffffae1f8666bdd0] page_fault at ffffffffa740122e
       [exception RIP: qla_nvme_abort_work+339]
       RIP: ffffffffc0f592e3  RSP: ffffae1f8666be80  RFLAGS: 00010297
       RAX: 0000000000000000  RBX: ffff9b581fc8af80  RCX: ffffffffc0f83bd0
       RDX: 0000000000000001  RSI: ffff9b5839c6c7c8  RDI: 0000000008000000
       RBP: ffff9b6832f85000   R8: ffffffffc0f68160   R9: ffffffffc0f70652
       R10: ffffae1f862ffdc8  R11: 0000000000000300  R12: 000000000000010d
       R13: 0000000000000000  R14: ffff9b5839cea000  R15: 0ffff9b583fab170
       ORIG_RAX: ffffffffffffffff   CS: 0010  SS: 0018
    #7 [ffffae1f8666be98] process_one_work at ffffffffa6aba184
    #8 [ffffae1f8666bed8] worker_thread at ffffffffa6aba39d
    #9 [ffffae1f8666bf10] kthread at ffffffffa6ac06ed

The crash was due to a stale SRB structure access after it was aborted.
Fix the issue by removing stale access.

Link: https://lore.kernel.org/r/20210908164622.19240-5-njavali@marvell.com
Fixes: 2cabf10dbb ("scsi: qla2xxx: Fix hang on NVMe command timeouts")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:19 -04:00
Saurav Kashyap
8192817efb scsi: qla2xxx: Check for firmware capability before creating QPair
Add firmware capability check of multiQ specifically for ISP25XX before
creating qpair.

Link: https://lore.kernel.org/r/20210908164622.19240-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:19 -04:00
Saurav Kashyap
52cca50d35 scsi: qla2xxx: Display 16G only as supported speeds for 3830c card
This card is unique and doesn't support lower speeds, hence update the fdmi
field to display 16G only.

Link: https://lore.kernel.org/r/20210908164622.19240-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:19 -04:00
Bikash Hazarika
9e1c320696 scsi: qla2xxx: Add support for mailbox passthru
This interface will allow user space applications to send a mailbox command
to the firmware.

Link: https://lore.kernel.org/r/20210908164622.19240-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:19 -04:00
Randy Dunlap
7366c23ff4 ptp: dp83640: don't define PAGE0
Building dp83640.c on arch/parisc/ produces a build warning for
PAGE0 being redefined. Since the macro is not used in the dp83640
driver, just make it a comment for documentation purposes.

In file included from ../drivers/net/phy/dp83640.c:23:
../drivers/net/phy/dp83640_reg.h:8: warning: "PAGE0" redefined
    8 | #define PAGE0                     0x0000
                 from ../drivers/net/phy/dp83640.c:11:
../arch/parisc/include/asm/page.h:187: note: this is the location of the previous definition
  187 | #define PAGE0   ((struct zeropage *)__PAGE_OFFSET)

Fixes: cb646e2b02 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210913220605.19682-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14 20:03:24 -07:00
Linus Walleij
339133f6c3 net: dsa: tag_rtl4_a: Drop bit 9 from egress frames
This drops the code setting bit 9 on egress frames on the
Realtek "type A" (RTL8366RB) frames.

This bit was set on ingress frames for unknown reason,
and was set on egress frames as the format of ingress
and egress frames was believed to be the same. As that
assumption turned out to be false, and since this bit
seems to have zero effect on the behaviour of the switch
let's drop this bit entirely.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210913143156.1264570-1-linus.walleij@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14 19:34:03 -07:00
Ajish Koshy
51e6ed83bb scsi: pm80xx: Fix memory leak during rmmod
Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.

Properly free memory when the module is removed.

Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 22:29:11 -04:00
Viswas G
c29737d03c scsi: pm80xx: Correct inbound and outbound queue logging
Correct inbound queue and outbound queue size in 'ib_log' and 'ob_log'
sysfs entries.

Link: https://lore.kernel.org/r/20210906170404.5682-4-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 22:29:11 -04:00
Ajish Koshy
b27a40534e scsi: pm80xx: Fix lockup in outbound queue management
Commit 1f02beff22 ("scsi: pm80xx: Remove global lock from outbound queue
processing") introduced a lock per outbound queue. Prior to that change the
driver was using a global lock for all outbound queues.

While processing the I/O responses and events the driver takes the outbound
queue spinlock and is supposed to release it in pm8001_ccb_task_free_done()
before calling command done(). Since the older code was using a global
lock, pm8001_ccb_task_free_done() was releasing the global spin lock. The
change that split the lock per outbound queue did not consider this and
pm8001_ccb_task_free_done() was still releasing the global lock.

Link: https://lore.kernel.org/r/20210906170404.5682-3-Ajish.Koshy@microchip.com
Fixes: 1f02beff22 ("scsi: pm80xx: Remove global lock from outbound queue processing")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 22:29:11 -04:00
Ajish Koshy
08d0a99213 scsi: pm80xx: Fix incorrect port value when registering a device
During phyup event, the firmware provides the phy_id and port_id and driver
is supposed to use these during device handle registration. Previously the
driver was using the port id value from libsas during device handle
registration. Since id can be different from the one assigned by firmware,
this can lead to wrong device registration and drives not showing up.

Use firmware assigned port id during device registration.

Link: https://lore.kernel.org/r/20210906170404.5682-2-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 22:29:11 -04:00
Adrian Bunk
52ce14c134 bnx2x: Fix enabling network interfaces without VFs
This function is called to enable SR-IOV when available,
not enabling interfaces without VFs was a regression.

Fixes: 65161c3555 ("bnx2x: Fix missing error code in bnx2x_iov_init_one()")
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reported-by: YunQiang Su <wzssyqa@gmail.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14 19:26:48 -07:00
Lukas Prediger
67f1e027c2 drivers/cdrom: improved ioctl for media change detection
The current implementation of the CDROM_MEDIA_CHANGED ioctl relies on
global state, meaning that only one process can detect a disc change
while the ioctl call will return 0 for other calling processes afterwards
(see bug 213267).

This introduces a new cdrom ioctl, CDROM_TIMED_MEDIA_CHANGE, that
works by maintaining a timestamp of the last detected disc change instead
of a boolean flag: Processes calling this ioctl command can provide
a timestamp of the last disc change known to them and receive
an indication whether the disc was changed since then and the updated
timestamp.

I considered fixing the buggy behavior in the original
CDROM_MEDIA_CHANGED ioctl but that would require maintaining state
for each calling process in the kernel, which seems like a worse
solution than introducing this new ioctl.

Signed-off-by: Lukas Prediger <lumip@lumip.de>
Link: https://lore.kernel.org/all/20210912191207.74449-1-lumip@lumip.de
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210913230942.1188-1-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-14 20:05:26 -06:00
Christoph Hellwig
9da4c7276e nvme: remove the call to nvme_update_disk_info in nvme_ns_remove
There is no need to explicitly unregister the integrity profile when
deleting the gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-14 20:03:30 -06:00
Lihong Kou
3df49967f6 block: flush the integrity workqueue in blk_integrity_unregister
When the integrity profile is unregistered there can still be integrity
reads queued up which could see a NULL verify_fn as shown by the race
window below:

CPU0                                    CPU1
  process_one_work                      nvme_validate_ns
    bio_integrity_verify_fn                nvme_update_ns_info
	                                     nvme_update_disk_info
	                                       blk_integrity_unregister
                                               ---set queue->integrity as 0
	bio_integrity_process
	--access bi->profile->verify_fn(bi is a pointer of queue->integity)

Before calling blk_integrity_unregister in nvme_update_disk_info, we must
make sure that there is no work item in the kintegrityd_wq. Just call
blk_flush_integrity to flush the work queue so the bug can be resolved.

Signed-off-by: Lihong Kou <koulihong@huawei.com>
[hch: split up and shortened the changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-14 20:03:30 -06:00
Christoph Hellwig
783a40a1b3 block: check if a profile is actually registered in blk_integrity_unregister
While clearing the profile itself is harmless, we really should not clear
the stable writes flag if it wasn't set due to a registered integrity
profile.

Reported-by: Lihong Kou <koulihong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20210914070657.87677-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-14 20:03:30 -06:00
Stephen Boyd
a8cd038cac clk: mediatek: Export clk_ops structures to modules
modpost complains once these drivers become modules.

 ERROR: modpost: "mtk_mux_gate_clr_set_upd_ops" [drivers/clk/mediatek/clk-mt6779.ko] undefined!

Let's just export them.

Cc: Hanks Chen <hanks.chen@mediatek.com>
Cc: Wendell Lin <wendell.lin@mediatek.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Miles Chen <miles.chen@mediatek.com>
Fixes: 32b028fb1d ("clk: mediatek: support COMMON_CLK_MEDIATEK module build")
Link: https://lore.kernel.org/r/20210915015540.1732014-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-09-14 18:57:23 -07:00
Alexei Starovoitov
4c24483e24 Merge branch 'bpf: add support for new btf kind BTF_KIND_TAG'
Yonghong Song says:

====================

LLVM14 added support for a new C attribute ([1])
  __attribute__((btf_tag("arbitrary_str")))
This attribute will be emitted to dwarf ([2]) and pahole
will convert it to BTF. Or for bpf target, this
attribute will be emitted to BTF directly ([3], [4]).
The attribute is intended to provide additional
information for
  - struct/union type or struct/union member
  - static/global variables
  - static/global function or function parameter.

This new attribute can be used to add attributes
to kernel codes, e.g., pre- or post- conditions,
allow/deny info, or any other info in which only
the kernel is interested. Such attributes will
be processed by clang frontend and emitted to
dwarf, converting to BTF by pahole. Ultimiately
the verifier can use these information for
verification purpose.

The new attribute can also be used for bpf
programs, e.g., tagging with __user attributes
for function parameters, specifying global
function preconditions, etc. Such information
may help verifier to detect user program
bugs.

After this series, pahole dwarf->btf converter
will be enhanced to support new llvm tag
for btf_tag attribute. With pahole support,
we will then try to add a few real use case,
e.g., __user/__rcu tagging, allow/deny list,
some kernel function precondition, etc,
in the kernel.

In the rest of the series, Patches 1-2 had
kernel support. Patches 3-4 added
libbpf support. Patch 5 added bpftool
support. Patches 6-10 added various selftests.
Patch 11 added documentation for the new kind.

  [1] https://reviews.llvm.org/D106614
  [2] https://reviews.llvm.org/D106621
  [3] https://reviews.llvm.org/D106622
  [4] https://reviews.llvm.org/D109560

Changelog:
  v2 -> v3:
    - put NR_BTF_KINDS and BTF_KIND_MAX into enum as well
    - check component_idx earlier (check_meta stage) in kernel
    - add more tests
    - fix misc nits
  v1 -> v2:
    - BTF ELF format changed in llvm ([4] above),
      so cross-board change to use the new format.
    - Clarified in commit message that BTF_KIND_TAG
      is not emitted by bpftool btf dump format c.
    - Fix various comments from Andrii.
====================

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-09-14 18:48:37 -07:00
Yonghong Song
48f5a6c416 docs/bpf: Add documentation for BTF_KIND_TAG
Add BTF_KIND_TAG documentation in btf.rst.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223103.249100-1-yhs@fb.com
2021-09-14 18:45:53 -07:00
Yonghong Song
c240ba2878 selftests/bpf: Add a test with a bpf program with btf_tag attributes
Add a bpf program with btf_tag attributes. The program is
loaded successfully with the kernel. With the command
  bpftool btf dump file ./tag.o
the following dump shows that tags are properly encoded:
  [8] STRUCT 'key_t' size=12 vlen=3
          'a' type_id=2 bits_offset=0
          'b' type_id=2 bits_offset=32
          'c' type_id=2 bits_offset=64
  [9] TAG 'tag1' type_id=8 component_id=-1
  [10] TAG 'tag2' type_id=8 component_id=-1
  [11] TAG 'tag1' type_id=8 component_id=1
  [12] TAG 'tag2' type_id=8 component_id=1
  ...
  [21] FUNC_PROTO '(anon)' ret_type_id=2 vlen=1
          'x' type_id=2
  [22] FUNC 'foo' type_id=21 linkage=static
  [23] TAG 'tag1' type_id=22 component_id=0
  [24] TAG 'tag2' type_id=22 component_id=0
  [25] TAG 'tag1' type_id=22 component_id=-1
  [26] TAG 'tag2' type_id=22 component_id=-1
  ...
  [29] VAR 'total' type_id=27, linkage=global
  [30] TAG 'tag1' type_id=29 component_id=-1
  [31] TAG 'tag2' type_id=29 component_id=-1

If an old clang compiler, which does not support btf_tag attribute,
is used, these btf_tag attributes will be silently ignored.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223058.248949-1-yhs@fb.com
2021-09-14 18:45:53 -07:00
Yonghong Song
ad526474ae selftests/bpf: Test BTF_KIND_TAG for deduplication
Add unit tests for BTF_KIND_TAG deduplication for
  - struct and struct member
  - variable
  - func and func argument

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223052.248535-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
35baba7a83 selftests/bpf: Add BTF_KIND_TAG unit tests
Test good and bad variants of BTF_KIND_TAG encoding.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223047.248223-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
3df3bd68d4 selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format
BTF_KIND_TAG ELF format has a component_idx which might have value -1.
test_btf may confuse it with common_type.name as NAME_NTH checkes
high 16bit to be 0xffff. Change NAME_NTH high 16bit check to be
0xfffe so it won't confuse with component_idx.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223041.248009-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
71d29c2d47 selftests/bpf: Test libbpf API function btf__add_tag()
Add btf_write tests with btf__add_tag() function.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223036.247560-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
5c07f2fec0 bpftool: Add support for BTF_KIND_TAG
Added bpftool support to dump BTF_KIND_TAG information.
The new bpftool will be used in later patches to dump
btf in the test bpf program object file.

Currently, the tags are not emitted with
  bpftool btf dump file <path> format c
and they are silently ignored.  The tag information is
mostly used in the kernel for verification purpose and the kernel
uses its own btf to check. With adding these tags
to vmlinux.h, tags will be encoded in program's btf but
they will not be used by the kernel, at least for now.
So let us delay adding these tags to format C header files
until there is a real need.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223031.246951-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
5b84bd1036 libbpf: Add support for BTF_KIND_TAG
Add BTF_KIND_TAG support for parsing and dedup.
Also added sanitization for BTF_KIND_TAG. If BTF_KIND_TAG is not
supported in the kernel, sanitize it to INTs.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223025.246687-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
30025e8bd8 libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag
This patch renames functions btf_{hash,equal}_int() to
btf_{hash,equal}_int_tag() so they can be reused for
BTF_KIND_TAG support. There is no functionality change for
this patch.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223020.245829-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
b5ea834dde bpf: Support for new btf kind BTF_KIND_TAG
LLVM14 added support for a new C attribute ([1])
  __attribute__((btf_tag("arbitrary_str")))
This attribute will be emitted to dwarf ([2]) and pahole
will convert it to BTF. Or for bpf target, this
attribute will be emitted to BTF directly ([3], [4]).
The attribute is intended to provide additional
information for
  - struct/union type or struct/union member
  - static/global variables
  - static/global function or function parameter.

For linux kernel, the btf_tag can be applied
in various places to specify user pointer,
function pre- or post- condition, function
allow/deny in certain context, etc. Such information
will be encoded in vmlinux BTF and can be used
by verifier.

The btf_tag can also be applied to bpf programs
to help global verifiable functions, e.g.,
specifying preconditions, etc.

This patch added basic parsing and checking support
in kernel for new BTF_KIND_TAG kind.

 [1] https://reviews.llvm.org/D106614
 [2] https://reviews.llvm.org/D106621
 [3] https://reviews.llvm.org/D106622
 [4] https://reviews.llvm.org/D109560

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223015.245546-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Yonghong Song
41ced4cd88 btf: Change BTF_KIND_* macros to enums
Change BTF_KIND_* macros to enums so they are encoded in dwarf and
appear in vmlinux.h. This will make it easier for bpf programs
to use these constants without macro definitions.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210914223009.245307-1-yhs@fb.com
2021-09-14 18:45:52 -07:00
Andrii Nakryiko
8987ede3ed selftests/bpf: Fix .gitignore to not ignore test_progs.c
List all possible test_progs flavors explicitly to avoid accidentally
ignoring valid source code files. In this case, test_progs.c was still
ignored after recent 809ed84de8 ("selftests/bpf: Whitelist test_progs.h
from .gitignore") fix that added exception only for test_progs.h.

Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210914162228.3995740-1-andrii@kernel.org
2021-09-14 18:41:14 -07:00
Jie Meng
c035407743 bpf,x64 Emit IMUL instead of MUL for x86-64
IMUL allows for multiple operands and saving and storing rax/rdx is no
longer needed. Signedness of the operands doesn't matter here because
the we only keep the lower 32/64 bit of the product for 32/64 bit
multiplications.

Signed-off-by: Jie Meng <jmeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210913211337.1564014-1-jmeng@fb.com
2021-09-14 18:36:36 -07:00