Commit graph

1,089,026 commits

Author SHA1 Message Date
Michael Chan
eca4cf12ac bnxt_en: Fix error recovery regression
The recent patch has introduced a regression by not reading the reset
count in the ERROR_RECOVERY async event handler.  We may have just
gone through a reset and the reset count has just incremented.  If
we don't update the reset count in the ERROR_RECOVERY event handler,
the health check timer will see that the reset count has changed and
will initiate an unintended reset.

Restore the unconditional update of the reset count in
bnxt_async_event_process() if error recovery watchdog is enabled.
Also, update the reset count at the end of the reset sequence to
make it even more robust.

Fixes: 1b2b918319 ("bnxt_en: Fix possible unintended driver initiated error recovery")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13 12:31:13 +01:00
Thomas Gleixner
32fd8b59f9 x86/extable: Get rid of redundant macros
No point in defining the identical macros twice depending on C or assembly
mode. They are still identical.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210908132525.023659534@linutronix.de
2021-09-13 12:52:38 +02:00
Thomas Gleixner
326b567f82 x86/extable: Tidy up redundant handler functions
No need to have the same code all over the place.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210908132524.963232825@linutronix.de
2021-09-13 12:33:06 +02:00
Mark Brown
9722162f01
Merge series "Support for Ingenic JZ47xx SPI controller" from Artur Rojek <contact@artur-rojek.eu>:
Hi,

This patchset introduces support for SPI controllers found in the
Ingenic JZ47xx family of SoCs. Of particular note, this allows to
replace GPIO backed SPI on the MIPS Creator CI20 board.

Mark:
Checkpatch generates a `need consistent spacing around '*'` error on
this patchset, however I believe this is a false positive due to it
confusing a pointer with multiplication operator inside a macro.

Rob:
I refrained from adding SPI pin groups into the bindings, as I felt that
would be enforcing a policy (SPI signals can be multiplexed on multiple
pin groups on the board, per use case). Instead, I included an example
pin configuration into the relevant commit description.

Other controllers already present in ci20.dts do specify their pin
groups, but I think this is bad practice. Do you have particular
guidelines on this?

Pavel:
Feel free to add your Tested-by, if you still have your CI20 setup
around :) I tested this driver with two SPI mode MMC/SD card readers and
also with the spi-loopback test driver.

Cheers,
Artur

Artur Rojek (2):
  SPI: add Ingenic JZ47xx driver.
  MIPS: JZ4780: CI20: DTS: add SPI controller config

Paul Cercueil (1):
  dt-bindings: spi: Document Ingenic SPI controller bindings

 .../devicetree/bindings/spi/ingenic,spi.yaml  |  72 +++
 arch/mips/boot/dts/ingenic/ci20.dts           |   9 +-
 arch/mips/boot/dts/ingenic/jz4780.dtsi        |  44 +-
 drivers/spi/Kconfig                           |   9 +
 drivers/spi/Makefile                          |   1 +
 drivers/spi/spi-ingenic.c                     | 482 ++++++++++++++++++
 6 files changed, 602 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/ingenic,spi.yaml
 create mode 100644 drivers/spi/spi-ingenic.c

--
2.33.0
2021-09-13 11:24:06 +01:00
Mark Brown
1e5dd2b9d6
Merge series "Patches to update for rockchip pdm" from Sugar Zhang <sugar.zhang@rock-chips.com>:
These patches fixup or update for rockchip pdm.

Changes in v4:
- Acked by Rob Herring

Changes in v3:
- Fix property 'path-map' suggested by Rob Herring.

Changes in v2:
- Fix yamllint errors.

Sugar Zhang (7):
  ASoC: rockchip: Add support for rv1126 pdm
  ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm
  ASoC: rockchip: pdm: Add support for rk3568 pdm
  ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm
  ASoC: rockchip: pdm: Add support for path map
  ASoC: dt-bindings: rockchip: pdm: Document property
    'rockchip,path-map'
  ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml

 .../devicetree/bindings/sound/rockchip,pdm.txt     |  46 --------
 .../devicetree/bindings/sound/rockchip,pdm.yaml    | 120 +++++++++++++++++++++
 sound/soc/rockchip/rockchip_pdm.c                  | 112 +++++++++++++++++--
 sound/soc/rockchip/rockchip_pdm.h                  |   6 ++
 4 files changed, 232 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt
 create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml

--
2.7.4
2021-09-13 11:24:04 +01:00
Mark Brown
a13a228e52
Merge series "Cirrus Logic CS35L41 Amplifier" from David Rhodes <drhodes@opensource.cirrus.com>:
ASoC driver and devicetree documentation for a new
Cirrus Logic amplifier CS35L41

v7 changes:
Remove property 'classh-bst-max-limit'

David Rhodes (2):
  ASoC: cs35l41: CS35L41 Boosted Smart Amplifier
  ASoC: cs35l41: Add bindings for CS35L41

 .../devicetree/bindings/sound/cs35l41.yaml    |  151 ++
 include/sound/cs35l41.h                       |   34 +
 sound/soc/codecs/Kconfig                      |   12 +
 sound/soc/codecs/Makefile                     |    4 +
 sound/soc/codecs/cs35l41-i2c.c                |  114 ++
 sound/soc/codecs/cs35l41-spi.c                |  143 ++
 sound/soc/codecs/cs35l41-tables.c             |  597 +++++++
 sound/soc/codecs/cs35l41.c                    | 1545 +++++++++++++++++
 sound/soc/codecs/cs35l41.h                    |  775 +++++++++
 9 files changed, 3375 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/cs35l41.yaml
 create mode 100644 include/sound/cs35l41.h
 create mode 100644 sound/soc/codecs/cs35l41-i2c.c
 create mode 100644 sound/soc/codecs/cs35l41-spi.c
 create mode 100644 sound/soc/codecs/cs35l41-tables.c
 create mode 100644 sound/soc/codecs/cs35l41.c
 create mode 100644 sound/soc/codecs/cs35l41.h

--
2.25.1
2021-09-13 11:24:03 +01:00
Mark Brown
599b103222
Merge series "ARM: dts: Last round of DT schema fixes" from Maxime Ripard <maxime@cerno.tech>:
Hi,

Here's another round of schema warnings fixes for the Allwinner platform.

There's a fair share of new schemas in there since the schema tools now warn
when a compatible is not documented in a schema.

We don't have any warning anymore if we use the OPP binding Rob submitted, and
since that means we have all our devices properly validated I don't expect more
fixes now, aside from the usual bunch of regressions.

Let me know what you think,
Maxime

Maxime Ripard (52):
  ASoC: dt-bindings: Add WM8978 Binding
  ASoC: dt-bindings: Convert Bluetooth SCO Link binding to a schema
  ASoC: dt-bindings: Convert SPDIF Transmitter binding to a schema
  ASoC: dt-bindings: Convert Simple Amplifier binding to a schema
  dt-bindings: Convert Reserved Memory binding to a schema
  dt-bindings: arm: Convert ARM CCI-400 binding to a schema
  dt-bindings: bluetooth: broadcom: Fix clocks check
  dt-bindings: bluetooth: realtek: Add missing max-speed
  dt-bindings: clocks: Fix typo in the H6 compatible
  dt-bindings: display: Move idk-1110wr to panel-lvds
  dt-bindings: display: Move idk-2121wr to panel-lvds
  dt-bindings: display: Move ee101ia-01d to panel-lvds
  dt-bindings: display: aa104xd12: Remove unused vcc-supply
  dt-bindings: display: aa104xd12: Fix data-mapping
  dt-bindings: display: Move aa104xd12 to panel-lvds
  dt-bindings: display: aa121td01: Remove unused vcc-supply
  dt-bindings: display: aa121td01: Fix data-mapping
  dt-bindings: display: Move aa121td01 to panel-lvds
  dt-bindings: display: Move gktw70sdae4se to panel-lvds
  dt-bindings: display: panel-lvds: Document missing panel compatibles
  dt-bindings: gnss: Convert UBlox Neo-6M binding to a schema
  dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
  dt-bindings: hwmon: Add IIO HWMON binding
  dt-bindings: input: Convert Silead GSL1680 binding to a schema
  dt-bindings: interconnect: sunxi: Add R40 MBUS compatible
  dt-bindings: media: ti,cal: Fix example
  dt-bindings: media: Convert OV5640 binding to a schema
  dt-bindings: mfd: Convert X-Powers AC100 binding to a schema
  dt-bindings: mfd: Convert X-Powers AXP binding to a schema
  dt-bindings: mmc: Convert MMC Card binding to a schema
  dt-bindings: net: dwmac: Fix typo in the R40 compatible
  dt-bindings: net: wireless: Convert ESP ESP8089 binding to a schema
  dt-bindings: regulator: Convert SY8106A binding to a schema
  dt-bindings: sunxi: Add CPU Configuration Controller Binding
  dt-bindings: sunxi: Add Allwinner A80 PRCM Binding
  dt-bindings: usb: Convert SMSC USB3503 binding to a schema
  dt-bindings: usb: dwc3: Fix usb-phy check
  dt-bindings: w1: Convert 1-Wire GPIO binding to a schema
  ARM: dts: sunxi: Rename power-supply names
  ARM: dts: sunxi: Rename gpio pinctrl names
  ARM: dts: sunxi: Fix OPP arrays
  ARM: dts: sunxi: Fix OPPs node name
  ARM: dts: sunxi: Fix the SPI NOR node names
  ARM: dts: v3s: Remove useless DMA properties
  ARM: dts: tbs711: Fix touchscreen compatible
  ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible
  arm64: dts: allwinner: h5: Fix GPU thermal zone node name
  arm64: dts: allwinner: h6: Fix de3 parent clocks ordering
  arm64: dts: allwinner: a100: Fix thermal zone node name
  arm64: dts: allwinner: pinetab: Change regulator node name to avoid
    warning
  arm64: dts: allwinner: teres-i: Add missing reg
  arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC

 .../devicetree/bindings/arm/arm,cci-400.yaml  | 216 ++++++++++
 .../bindings/arm/cci-control-port.yaml        |  38 ++
 Documentation/devicetree/bindings/arm/cci.txt | 224 ----------
 .../devicetree/bindings/arm/cpus.yaml         |   2 +
 .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml   |   1 +
 .../sunxi/allwinner,sun6i-a31-cpuconfig.yaml  |  38 ++
 .../arm/sunxi/allwinner,sun9i-a80-prcm.yaml   |  33 ++
 .../clock/allwinner,sun8i-a83t-de2-clk.yaml   |   2 +-
 .../display/panel/advantech,idk-1110wr.yaml   |  69 ---
 .../display/panel/advantech,idk-2121wr.yaml   | 121 ------
 .../display/panel/innolux,ee101ia-01d.yaml    |  31 --
 .../bindings/display/panel/lvds.yaml          | 130 +++++-
 .../display/panel/mitsubishi,aa104xd12.yaml   |  75 ----
 .../display/panel/mitsubishi,aa121td01.yaml   |  74 ----
 .../display/panel/sgd,gktw70sdae4se.yaml      |  68 ---
 .../bindings/gnss/u-blox,neo-6m.yaml          |  62 +++
 .../devicetree/bindings/gnss/u-blox.txt       |  45 --
 .../devicetree/bindings/gpio/gpio-axp209.txt  |  75 ----
 .../bindings/gpio/x-powers,axp209-gpio.yaml   |  55 +++
 .../devicetree/bindings/hwmon/iio-hwmon.yaml  |  37 ++
 .../i2c/allwinner,sun6i-a31-p2wi.yaml         |   2 +-
 .../input/touchscreen/silead,gsl1680.yaml     |  91 ++++
 .../input/touchscreen/silead_gsl1680.txt      |  44 --
 .../devicetree/bindings/media/i2c/ov5640.txt  |  92 ----
 .../bindings/media/i2c/ovti,ov5640.yaml       | 154 +++++++
 .../devicetree/bindings/media/ti,cal.yaml     |   4 +-
 .../devicetree/bindings/mfd/ac100.txt         |  50 ---
 .../devicetree/bindings/mfd/axp20x.txt        | 273 ------------
 .../bindings/mfd/x-powers,ac100.yaml          | 116 +++++
 .../bindings/mfd/x-powers,axp152.yaml         | 400 ++++++++++++++++++
 .../devicetree/bindings/mmc/mmc-card.txt      |  30 --
 .../devicetree/bindings/mmc/mmc-card.yaml     |  48 +++
 .../bindings/mmc/mmc-controller.yaml          |   6 -
 .../net/allwinner,sun8i-a83t-emac.yaml        |   4 +-
 .../bindings/net/broadcom-bluetooth.yaml      |  17 +-
 .../bindings/net/realtek-bluetooth.yaml       |   2 +
 .../devicetree/bindings/net/snps,dwmac.yaml   |   6 +-
 .../bindings/net/wireless/esp,esp8089.txt     |  30 --
 .../bindings/net/wireless/esp,esp8089.yaml    |  43 ++
 .../bindings/regulator/silergy,sy8106a.yaml   |  52 +++
 .../bindings/regulator/sy8106a-regulator.txt  |  23 -
 .../reserved-memory/memory-region.yaml        |  40 ++
 .../reserved-memory/reserved-memory.txt       | 172 +-------
 .../reserved-memory/reserved-memory.yaml      |  96 +++++
 .../reserved-memory/shared-dma-pool.yaml      |  87 ++++
 .../devicetree/bindings/sound/bt-sco.txt      |  13 -
 .../bindings/sound/linux,bt-sco.yaml          |  38 ++
 .../bindings/sound/linux,spdif-dit.yaml       |  32 ++
 .../bindings/sound/simple-amplifier.txt       |  17 -
 .../sound/simple-audio-amplifier.yaml         |  45 ++
 .../bindings/sound/spdif-transmitter.txt      |  10 -
 .../devicetree/bindings/sound/wlf,wm8978.yaml |  58 +++
 .../devicetree/bindings/usb/smsc,usb3503.yaml | 108 +++++
 .../devicetree/bindings/usb/snps,dwc3.yaml    |  10 +-
 .../devicetree/bindings/usb/usb3503.txt       |  39 --
 .../devicetree/bindings/w1/w1-gpio.txt        |  27 --
 .../devicetree/bindings/w1/w1-gpio.yaml       |  44 ++
 arch/arm/boot/dts/axp209.dtsi                 |   6 +-
 arch/arm/boot/dts/axp22x.dtsi                 |   6 +-
 arch/arm/boot/dts/axp81x.dtsi                 |  10 +-
 .../arm/boot/dts/sun4i-a10-olinuxino-lime.dts |  11 +-
 arch/arm/boot/dts/sun4i-a10.dtsi              |  11 +-
 arch/arm/boot/dts/sun5i-a13.dtsi              |  15 +-
 arch/arm/boot/dts/sun6i-a31.dtsi              |  44 +-
 arch/arm/boot/dts/sun7i-a20-bananapi.dts      |  17 +-
 arch/arm/boot/dts/sun7i-a20.dtsi              |  34 +-
 arch/arm/boot/dts/sun8i-a33.dtsi              |   4 +-
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts     |   2 +-
 arch/arm/boot/dts/sun8i-a83t.dtsi             |   4 +-
 arch/arm/boot/dts/sun8i-h3.dtsi               |   4 +-
 arch/arm/boot/dts/sun8i-v3-sl631.dtsi         |   2 +-
 arch/arm/boot/dts/sun8i-v3s.dtsi              |   2 -
 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts   |   2 +-
 .../boot/dts/sunxi-libretech-all-h3-it.dtsi   |   2 +-
 arch/arm64/boot/dts/allwinner/axp803.dtsi     |  10 +-
 .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |   6 +-
 .../dts/allwinner/sun50i-a64-cpu-opp.dtsi     |   2 +-
 .../dts/allwinner/sun50i-a64-orangepi-win.dts |   2 +-
 .../boot/dts/allwinner/sun50i-a64-pinetab.dts |   2 +-
 .../boot/dts/allwinner/sun50i-a64-teres-i.dts |   3 +-
 .../boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi |   2 +-
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi  |   2 +-
 .../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi |   2 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |   8 +-
 84 files changed, 2191 insertions(+), 1743 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/arm,cci-400.yaml
 create mode 100644 Documentation/devicetree/bindings/arm/cci-control-port.yaml
 delete mode 100644 Documentation/devicetree/bindings/arm/cci.txt
 create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
 create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
 create mode 100644 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
 delete mode 100644 Documentation/devicetree/bindings/gnss/u-blox.txt
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
 create mode 100644 Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/ac100.txt
 delete mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
 delete mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.txt
 create mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
 create mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
 delete mode 100644 Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/bt-sco.txt
 create mode 100644 Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/simple-amplifier.txt
 create mode 100644 Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/spdif-transmitter.txt
 create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
 create mode 100644 Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
 delete mode 100644 Documentation/devicetree/bindings/usb/usb3503.txt
 delete mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.yaml

--
2.31.1
2021-09-13 11:24:01 +01:00
Mark Brown
214db271b9
Merge series "Convert name-prefix doc to json-schema" from Sameer Pujar <spujar@nvidia.com>:
Following are the changes:
  - Add json-schema for 'sound-name-prefix' documentation under
    'name-perfix.yaml'
  - Use schema references wherever needed.
  - Remove txt based doc

Changelog
=========

v2 -> v3
--------
 * Removed examples in patch 1/3 as suggested by Rob
 * Added reviewed tag from Jerome for the series
 * Added reviewed tag from Rob for patch 2/3

v1 -> v2
--------
 * Provide top reference to name-prefix.yaml as suggested by Rob
   for patch 2/3
 * Dropped couple of unreachable email ids from Cc list in commit
   message of patch 2/3
 * No changes in remaining patches

Sameer Pujar (3):
  ASoC: Add json-schema documentation for sound-name-prefix
  ASoC: Use schema reference for sound-name-prefix
  ASoC: Remove name-prefix.txt

 .../devicetree/bindings/sound/name-prefix.txt      | 24 ----------------------
 .../devicetree/bindings/sound/name-prefix.yaml     | 21 +++++++++++++++++++
 .../bindings/sound/nvidia,tegra186-dspk.yaml       |  9 +++-----
 .../bindings/sound/nvidia,tegra210-dmic.yaml       |  9 +++-----
 .../bindings/sound/nvidia,tegra210-i2s.yaml        |  9 +++-----
 .../devicetree/bindings/sound/nxp,tfa989x.yaml     |  9 +++-----
 Documentation/devicetree/bindings/sound/rt5659.txt |  2 +-
 .../bindings/sound/simple-audio-mux.yaml           |  9 +++-----
 8 files changed, 37 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt
 create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.yaml

--
2.7.4
2021-09-13 11:24:00 +01:00
Geert Uytterhoeven
a7b68ed15d m68k: mvme: Remove overdue #warnings in RTC handling
The warnings were introduced when converting the MVME147 and MVME16x
RTC handling from gettod to hwclk.  Replace the #warning by a comment,
and return an error to inform the upper layer that writing to the RTC is
not yet supported.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907124511.2723414-1-geert@linux-m68k.org
2021-09-13 11:19:05 +02:00
Guenter Roeck
b1a89856fb m68k: Double cast io functions to unsigned long
m68k builds fail widely with errors such as

arch/m68k/include/asm/raw_io.h:20:19: error:
	cast to pointer from integer of different size
arch/m68k/include/asm/raw_io.h:30:32: error:
	cast to pointer from integer of different size [-Werror=int-to-p

On m68k, io functions are defined as macros. The problem is seen if the
macro parameter variable size differs from the size of a pointer. Cast
the parameter of all io macros to unsigned long before casting it to
a pointer to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-09-13 11:19:05 +02:00
Jason Wang
075667cc6c pinctrl: renesas: No need to initialise global statics
Global static variables don't need to be initialized to 0, because the
compiler will initialize them.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20210906134040.96642-1-wangborong@cdjrlc.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-13 11:05:03 +02:00
Geert Uytterhoeven
2ed1e48159 soc: renesas: Identify more R-Car Gen3e SoCs
Add support for identifying the remaining R-Car Gen3e SoCs: R-Car H3e
(R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
(R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8).

As these are different gradings of the already supported R-Car Gen3
SoCs, support for them is enabled through the existing ARCH_R8A779*
configuration symbols.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ccf2206b24147b3d977e4119bbdefaedceb28644.1628766192.git.geert+renesas@glider.be
2021-09-13 10:56:29 +02:00
Geert Uytterhoeven
e43eada9ac dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards
Document the compatible values for the remaining R-Car Gen3e SoCs: R-Car
H3e (R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
(R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8).  These are different
gradings of R-Car Gen3 SoCs.

All R-Car Gen3e on-SoC devices are identical to the devices on the
corresponding R-Car Gen3 SoCs, and thus just use the compatible values
for the latter.  The root compatible properties do gain an additional
value, to sort out integration issues if they ever arise.

Document the use of these SoCs on the Salvator-XS, ULCB (with and
without Kingfisher extension), Ebisu, and Draak development boards.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/55271d405112f327753945072cde5d158ab815b1.1628766192.git.geert+renesas@glider.be
2021-09-13 10:54:41 +02:00
Yongqiang Niu
d687e056a1 soc: mediatek: mmsys: Add mt8192 mmsys routing table
mt8192 has different routing registers than mt8183

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Link: https://lore.kernel.org/r/1627894773-23872-3-git-send-email-yongqiang.niu@mediatek.com
[mb: take mask into account]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-13 10:52:13 +02:00
Yongqiang Niu
cb19c10797 soc: mediatek: mmsys: add comp OVL_2L2/POSTMASK/RDMA4
This patch add some more ddp component
OVL_2L2 is ovl which include 2 layers overlay
POSTMASK control round corner for display frame
RDMA4 read dma buffer

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/1627894773-23872-2-git-send-email-yongqiang.niu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-13 10:52:12 +02:00
Kansho Nishida
d2bbd5d96b arm64: dts: mt8183: add kukui platform audio node
Set pin control for the SoC sound node.
The compatibles are set by each model dts.

The codecs that each models use are:
burnet       ts3a227_max98357
damu         da7219_max98357
fennel       da7219_rt1015p
fennel14     da7219_rt1015p
juniper      ts3a227_max98357
kakadu       da7219_rt1015p
kappa        ts3a227_max98357
kenzo        ts3a227_max98357
kodama       ts3a227_max98357
krane        ts3a227_max98357
willow-sku0  da7219_max98357
willow-sku1  ts3a227_max98357

Signed-off-by: Kansho Nishida <kansho@chromium.org>
Link: https://lore.kernel.org/r/20210706190111.v3.2.I6e9ce0f2a489f9a52299656cd966b38ae75e7552@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-13 10:51:33 +02:00
Kansho Nishida
13dd23cfc6 arm64: dts: mt8183: add audio node
Add afe (audio front end) device node to the MT8183 dtsi.

Signed-off-by: Kansho Nishida <kansho@chromium.org>
Link: https://lore.kernel.org/r/20210706190111.v3.1.I88a52644e47e88b15f5db9841cb084dc53c5875c@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-13 10:51:33 +02:00
Chun-Jie Chen
5d2b897bc6 arm64: dts: mediatek: Add mt8192 clock controllers
Add clock controller nodes for SoC mt8192

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210727023205.20319-2-chun-jie.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-13 10:51:32 +02:00
Hans de Goede
196159d278 platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet
Add info for getting the firmware directly from the UEFI for the Chuwi Hi10
Plus (CWI527), so that the user does not need to manually install the
firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.

Also tweak the min and width/height values a bit for more accurate position
reporting.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210905130210.32810-2-hdegoede@redhat.com
2021-09-13 10:41:56 +02:00
Hans de Goede
3bf1669b0e platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet
Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210905130210.32810-1-hdegoede@redhat.com
2021-09-13 10:41:56 +02:00
Matan Ziv-Av
4c4a3d7cff lg-laptop: Correctly handle dmi_get_system_info() returning NULL
The laptop model is identified by parsing the product name. If no
product name is available, do not try to parse it.
Default model is 2017.

Signed-off-by: Matan Ziv-Av <matan@svgalib.org>
Link: https://lore.kernel.org/r/93ff3bb-503b-f73-bf18-87bae1699ed@svgalib.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-09-13 10:38:52 +02:00
Andy Shevchenko
349bff48ae platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.

Instead of adding ifdeffery here and there, drop ACPI_PTR()
and unused acpi.h.

Fixes: fdca4f16f5 ("platform:x86: add Intel P-Unit mailbox IPC driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210827145310.76239-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-09-13 10:36:52 +02:00
Carlo Lobrano
7bb057134d USB: serial: option: add Telit LN920 compositions
This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-09-13 10:15:41 +02:00
xinhui pan
617d5b34f2 drm/ttm: Try to check if new ttm man out of bounds during compile
Allow TTM know if vendor set new ttm mananger out of bounds by adding
build_bug_on.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913080950.180752-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
2021-09-13 10:14:28 +02:00
David Howells
9d37e1cab2 afs: Fix updating of i_blocks on file/dir extension
When an afs file or directory is modified locally such that the total file
size is extended, i_blocks needs to be recalculated too.

Fix this by making afs_write_end() and afs_edit_dir_add() call
afs_set_i_size() rather than setting inode->i_size directly as that also
recalculates inode->i_blocks.

This can be tested by creating and writing into directories and files and
then examining them with du.  Without this change, directories show a 4
blocks (they start out at 2048 bytes) and files show 0 blocks; with this
change, they should show a number of blocks proportional to the file size
rounded up to 1024.

Fixes: 31143d5d51 ("AFS: implement basic file write support")
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/
2021-09-13 09:14:21 +01:00
David Howells
b537a3c217 afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and
Linux's afs client switches between them when talking to a non-YFS server
if the read size, the file position or the sum of the two have the upper 32
bits set of the 64-bit value.

This is a problem, however, since the file position and length fields of
FS.FetchData are *signed* 32-bit values.

Fix this by capturing the capability bits obtained from the fileserver when
it's sent an FS.GetCapabilities RPC, rather than just discarding them, and
then picking out the VICED_CAPABILITY_64BITFILES flag.  This can then be
used to decide whether to use FS.FetchData or FS.FetchData64 - and also
FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to
switch on the parameter values.

This capabilities flag could also be used to limit the maximum size of the
file, but all servers must be checked for that.

Note that the issue does not exist with FS.StoreData - that uses *unsigned*
32-bit values.  It's also not a problem with Auristor servers as its
YFS.FetchData64 op uses unsigned 64-bit values.

This can be tested by cloning a git repo through an OpenAFS client to an
OpenAFS server and then doing "git status" on it from a Linux afs
client[1].  Provided the clone has a pack file that's in the 2G-4G range,
the git status will show errors like:

	error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
	error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index

This can be observed in the server's FileLog with something like the
following appearing:

Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001
Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866
...
Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5

Note the file position of 18446744071815340032.  This is the requested file
position sign-extended.

Fixes: b9b1f8d593 ("AFS: write support fixes")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
cc: openafs-devel@openafs.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c9 [1]
Link: https://lore.kernel.org/r/951332.1631308745@warthog.procyon.org.uk/
2021-09-13 09:14:21 +01:00
David Howells
4fe6a94682 afs: Try to avoid taking RCU read lock when checking vnode validity
Try to avoid taking the RCU read lock when checking the validity of a
vnode's callback state.  The only thing it's needed for is to pin the
parent volume's server list whilst we search it to find the record of the
server we're currently using to see if it has been reinitialised (ie. it
sent us a CB.InitCallBackState* RPC).

Do this by the following means:

 (1) Keep an additional per-cell counter (fs_s_break) that's incremented
     each time any of the fileservers in the cell reinitialises.

     Since the new counter can be accessed without RCU from the vnode, we
     can check that first - and only if it differs, get the RCU read lock
     and check the volume's server list.

 (2) Replace afs_get_s_break_rcu() with afs_check_server_good() which now
     indicates whether the callback promise is still expected to be present
     on the server.  This does the checks as described in (1).

 (3) Restructure afs_check_validity() to take account of the change in (2).

     We can also get rid of the valid variable and just use the need_clear
     variable with the addition of the afs_cb_break_no_promise reason.

 (4) afs_check_validity() probably shouldn't be altering vnode->cb_v_break
     and vnode->cb_s_break when it doesn't have cb_lock exclusively locked.

     Move the change to vnode->cb_v_break to __afs_break_callback().

     Delegate the change to vnode->cb_s_break to afs_select_fileserver()
     and set vnode->cb_fs_s_break there also.

 (5) afs_validate() no longer needs to get the RCU read lock around its
     call to afs_check_validity() - and can skip the call entirely if we
     don't have a promise.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111669583.283156.1397603105683094563.stgit@warthog.procyon.org.uk/
2021-09-13 09:10:39 +01:00
David Howells
6e0e99d58a afs: Fix mmap coherency vs 3rd-party changes
Fix the coherency management of mmap'd data such that 3rd-party changes
become visible as soon as possible after the callback notification is
delivered by the fileserver.  This is done by the following means:

 (1) When we break a callback on a vnode specified by the CB.CallBack call
     from the server, we queue a work item (vnode->cb_work) to go and
     clobber all the PTEs mapping to that inode.

     This causes the CPU to trip through the ->map_pages() and
     ->page_mkwrite() handlers if userspace attempts to access the page(s)
     again.

     (Ideally, this would be done in the service handler for CB.CallBack,
     but the server is waiting for our reply before considering, and we
     have a list of vnodes, all of which need breaking - and the process of
     getting the mmap_lock and stripping the PTEs on all CPUs could be
     quite slow.)

 (2) Call afs_validate() from the ->map_pages() handler to check to see if
     the file has changed and to get a new callback promise from the
     server.

Also handle the fileserver telling us that it's dropping all callbacks,
possibly after it's been restarted by sending us a CB.InitCallBackState*
call by the following means:

 (3) Maintain a per-cell list of afs files that are currently mmap'd
     (cell->fs_open_mmaps).

 (4) Add a work item to each server that is invoked if there are any open
     mmaps when CB.InitCallBackState happens.  This work item goes through
     the aforementioned list and invokes the vnode->cb_work work item for
     each one that is currently using this server.

     This causes the PTEs to be cleared, causing ->map_pages() or
     ->page_mkwrite() to be called again, thereby calling afs_validate()
     again.

I've chosen to simply strip the PTEs at the point of notification reception
rather than invalidate all the pages as well because (a) it's faster, (b)
we may get a notification for other reasons than the data being altered (in
which case we don't want to clobber the pagecache) and (c) we need to ask
the server to find out - and I don't want to wait for the reply before
holding up userspace.

This was tested using the attached test program:

	#include <stdbool.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <fcntl.h>
	#include <sys/mman.h>
	int main(int argc, char *argv[])
	{
		size_t size = getpagesize();
		unsigned char *p;
		bool mod = (argc == 3);
		int fd;
		if (argc != 2 && argc != 3) {
			fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]);
			exit(2);
		}
		fd = open(argv[1], mod ? O_RDWR : O_RDONLY);
		if (fd < 0) {
			perror(argv[1]);
			exit(1);
		}

		p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ,
			 MAP_SHARED, fd, 0);
		if (p == MAP_FAILED) {
			perror("mmap");
			exit(1);
		}
		for (;;) {
			if (mod) {
				p[0]++;
				msync(p, size, MS_ASYNC);
				fsync(fd);
			}
			printf("%02x", p[0]);
			fflush(stdout);
			sleep(1);
		}
	}

It runs in two modes: in one mode, it mmaps a file, then sits in a loop
reading the first byte, printing it and sleeping for a second; in the
second mode it mmaps a file, then sits in a loop incrementing the first
byte and flushing, then printing and sleeping.

Two instances of this program can be run on different machines, one doing
the reading and one doing the writing.  The reader should see the changes
made by the writer, but without this patch, they aren't because validity
checking is being done lazily - only on entry to the filesystem.

Testing the InitCallBackState change is more complicated.  The server has
to be taken offline, the saved callback state file removed and then the
server restarted whilst the reading-mode program continues to run.  The
client machine then has to poke the server to trigger the InitCallBackState
call.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/
2021-09-13 09:10:39 +01:00
David Howells
63d49d843e afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation
The AFS filesystem is currently triggering the silly-rename cleanup from
afs_d_revalidate() when it sees that a dentry has been changed by a third
party[1].  It should not be doing this as the cleanup includes deleting the
silly-rename target file on iput.

Fix this by removing the places in the d_revalidate handling that validate
anything other than the directory and the dirent.  It probably should not
be looking to validate the target inode of the dentry also.

This includes removing the point in afs_d_revalidate() where the inode that
a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED).
We don't know it got deleted.  It could have been renamed or it could have
hard links remaining.

This was reproduced by cloning a git repo onto an afs volume on one
machine, switching to another machine and doing "git status", then
switching back to the first and doing "git status".  The second status
would show weird output due to ".git/index" getting deleted by the above
mentioned mechanism.

A simpler way to do it is to do:

	machine 1: touch a
	machine 2: touch b; mv -f b a
	machine 1: stat a

on an afs volume.  The bug shows up as the stat failing with ENOENT and the
file server log showing that machine 1 deleted "a".

Fixes: 79ddbfa500 ("afs: Implement sillyrename for unlink and rename")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1]
Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/
2021-09-13 09:10:39 +01:00
David Howells
3978d81652 afs: Add missing vnode validation checks
afs_d_revalidate() should only be validating the directory entry it is
given and the directory to which that belongs; it shouldn't be validating
the inode/vnode to which that dentry points.  Besides, validation need to
be done even if we don't call afs_d_revalidate() - which might be the case
if we're starting from a file descriptor.

In order for afs_d_revalidate() to be fixed, validation points must be
added in some other places.  Certain directory operations, such as
afs_unlink(), already check this, but not all and not all file operations
either.

Note that the validation of a vnode not only checks to see if the
attributes we have are correct, but also gets a promise from the server to
notify us if that file gets changed by a third party.

Add the following checks:

 - Check the vnode we're going to make a hard link to.
 - Check the vnode we're going to move/rename.
 - Check the vnode we're going to read from.
 - Check the vnode we're going to write to.
 - Check the vnode we're going to sync.
 - Check the vnode we're going to make a mapped page writable for.

Some of these aren't strictly necessary as we're going to perform a server
operation that might get the attributes anyway from which we can determine
if something changed - though it might not get us a callback promise.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111667354.283156.12720698333342917516.stgit@warthog.procyon.org.uk/
2021-09-13 09:10:39 +01:00
Cai Huoqing
d4cb82aa2e drm/meson: Make use of the helper function devm_platform_ioremap_resourcexxx()
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135644.4576-1-caihuoqing@baidu.com
2021-09-13 09:58:40 +02:00
Christian Hewitt
26d1400f74 arm64: dts: amlogic: add support for Radxa Zero
Radxa Zero is a small form factor SBC based on the Amlogic S905Y2
chipset that ships in a number of RAM/eMMC configurations:

Boards with 512MB/1GB LPDDR4 RAM have no eMMC storage and BCM43436
wireless (2.4GHz b/g/n) while 2GB/4GB boards have 8/16/32/64/128GB
eMMC storage and BCM4345 wireless (2.4/5GHz a/b/g/n/ac).

- Amlogic S905Y2 quad-core Cortex-A53
- Mali G31-MP2 GPU
- HDMI 2.1 output (micro)
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210909102154.22710-3-christianshewitt@gmail.com
2021-09-13 09:50:30 +02:00
Christian Hewitt
663aa3b3c8 dt-bindings: arm: amlogic: add support for Radxa Zero
Radxa Zero is a small form-factor SBC with an Amlogic S905Y2 chip.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210909102154.22710-2-christianshewitt@gmail.com
2021-09-13 09:50:18 +02:00
Dongjin Kim
9d02214f83 arm64: dts: meson: sm1: add Ethernet PHY reset line for ODROID-C4/HC4
This patch is to fix an issue that the ethernet link doesn't come up
when using ip link set down/up:
   [   11.428114] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
   [   14.428595] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
   [   14.428610] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
   [   14.428974] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
   [   14.711185] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed

This fix refers to two commits applied for ODROID-N2 (G12B).
    commit 658e4129bb ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
    commit 1c7412530d ("arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements")

Fixes: 88d537bc92 ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi")
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: added fixes tag and typo in commit log]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YScKYFWlYymgGw3l@anyang-linuxfactory-or-kr
2021-09-13 09:45:53 +02:00
Cai Huoqing
d54dbe9f0e soc: amlogic: meson-clk-measure: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210908071544.603-2-caihuoqing@baidu.com
2021-09-13 09:43:00 +02:00
Cai Huoqing
97a4a24087 soc: amlogic: canvas: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210908071544.603-1-caihuoqing@baidu.com
2021-09-13 09:43:00 +02:00
Christian Hewitt
ca8d1fda5b soc: amlogic: meson-gx-socinfo: Add S905Y2 ID for Radxa Zero
Add the SOC ID for the S905Y2 used in the Radxa Zero. Before/After:

[    0.321650] soc soc0: Amlogic Meson G12A (Unknown) Revision 28:b (30:2) Detected
[    0.318533] soc soc0: Amlogic Meson G12A (S905Y2) Revision 28:b (30:2) Detected

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210820012718.10761-1-christianshewitt@gmail.com
2021-09-13 09:38:20 +02:00
Raag Jadav
7629254054 dt-bindings: at24: add ON Semi CAT24C04 and CAT24C05
Add bindings for ON Semi CAT24C04 and CAT24C05 eeproms,
which are compatible with Atmel AT24C04.

Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-09-13 09:28:57 +02:00
Jernej Skrabec
e954a7afe8
arm64: dts: allwinner: a64: Add GPU opp table
GPU on A64 currently runs at default frequency, which is 297 MHz. This
is a bit low in some cases and noticeable lag can be observed in GPU
rendered UIs. GPU is capable to run at 432 MHz.

Add GPU OPP table.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210912095032.2397824-1-jernej.skrabec@gmail.com
2021-09-13 09:18:31 +02:00
Jernej Skrabec
d119948059
ARM: dts: sun8i: r40: Add I2S nodes
Allwinner R40 has 3 I2S controllers, compatible to those in H3. First
two are routed to pins, while third is used internally for HDMI audio.

Add nodes for all 3 I2S controllers.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210912072914.398419-3-jernej.skrabec@gmail.com
2021-09-13 09:16:07 +02:00
Jernej Skrabec
56c9d40716
dt-bindings: sound: sun4i-i2s: add Allwinner R40 I2S compatible
Allwinner R40 has 3 I2S controllers, compatible to those, found in H3.

Add R40/H3 compatible pair to DT bindings.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210912072914.398419-2-jernej.skrabec@gmail.com
2021-09-13 09:16:04 +02:00
Clément Bœsch
0764e365da
arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
RX and TX delay are provided by ethernet PHY. Reflect that in ethernet
node.

Fixes: 44a94c7ef9 ("arm64: dts: allwinner: H5: Restore EMAC changes")
Signed-off-by: Clément Bœsch <u@pkh.me>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210905002027.171984-1-u@pkh.me
2021-09-13 09:05:01 +02:00
Maxime Ripard
a1830fe9a2
arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC
Neither the binding nor the driver make any use of the wakeup-source
property for the AXP803. Remove it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-53-maxime@cerno.tech
2021-09-13 09:04:35 +02:00
Maxime Ripard
01312f74dd
arm64: dts: allwinner: teres-i: Add missing reg
The anx6345 bridge mandates that the input port is named port@0. Since
we have a unit-address, this implies that we need a reg property with
the same value, but it was found to be missing in the Teres-I device
tree. Make sure it's there.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-52-maxime@cerno.tech
2021-09-13 09:04:34 +02:00
Maxime Ripard
35ce5b871f
arm64: dts: allwinner: pinetab: Change regulator node name to avoid warning
The fixed regulator clock name has a unit address, but no reg property,
which generates a warning in DTC. Change its name to remove its useless
unit address.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-51-maxime@cerno.tech
2021-09-13 09:04:34 +02:00
Maxime Ripard
5c34c4e46e
arm64: dts: allwinner: a100: Fix thermal zone node name
The thermal zones one the A100 are called $device-thermal-zone.

However, the thermal zone binding explicitly requires that zones are
called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-50-maxime@cerno.tech
2021-09-13 09:04:33 +02:00
Maxime Ripard
e1b123a930
arm64: dts: allwinner: h6: Fix de3 parent clocks ordering
While it doesn't really matter from a functional point of view in this
driver's case, it's usually a good practice to list the clocks in a
driver in the same driver across all its users.

The H6 is using the inverse order than all the other users, so let's
make it consistent.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-49-maxime@cerno.tech
2021-09-13 09:04:33 +02:00
Maxime Ripard
94a0f2b0e4
arm64: dts: allwinner: h5: Fix GPU thermal zone node name
The GPU thermal zone is named gpu_thermal. However, the underscore is
an invalid character for a node name and the thermal zone binding
explicitly requires that zones are called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-48-maxime@cerno.tech
2021-09-13 09:04:32 +02:00
Maxime Ripard
11085c6548
ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible
The dumb-vga-dac and adi,adv7123 compatibles are not supposed to be used
together according to the binding.

Since the corpro gm7123 is a drop-in replacement for the adv7123, let's
remove dumb-vga-dac from our compatible list.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-47-maxime@cerno.tech
2021-09-13 09:04:32 +02:00
Maxime Ripard
a73079c889
ARM: dts: tbs711: Fix touchscreen compatible
The edt,edt-ft5x06 compatible has never been a valid compatible
according to the binding. Let's change for one that is.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-46-maxime@cerno.tech
2021-09-13 09:04:31 +02:00