Advancing pointer initially fixed issue for some users but caused
regression for others. Leave data as it to make it easier for end users
to adjust their topology files if needed.
Fixes: a8cd7066f0 ("ASoC: Intel: Skylake: Strip T and L from TLV IPCs")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Contrary to what is said in board's file, topology targeting
kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert
changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring
old behavior back, aligning with topology expectations.
Fixes: 716d53cc78 ("ASoC: Intel: Boards: Add Maxim98373 support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sync PCI IDs with Bspec.
Bspec:53655
Changes since V2:
- Upstream devices which are "POR" yes and
"Ok to upstream" yes - James Asmus
Changes since V1:
- All POR and Non POR Ids needs to be upstreamed - James Asmus
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818050116.1116237-1-tejaskumarx.surendrakumar.upadhyay@intel.com
The duration of the hw_reset is defined as 4096 cycles. The Cadence IP
allows for an additional delay which doesn't seem necessary in
practice: the actual reset sequence duration is defined by the sync_go
mechanism, not by the IP itself.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818030130.17113-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Intel stress tests reported issues with the clock stop mode,
specifically when trying to do a system suspend while the link is
already pm_runtime suspended.
In this case, we need to disable the shim wake, but when the PCI
parent device is also pm_runtime suspended the SHIM registers are not
accessible.
Since this is an invalid corner case, this patch suggests a pm_runtime
resume of the entire bus to full power (parent+child devices) before
the system suspend so that the shim wake can be disabled.
Unlike the suspend operation, the .prepare callbacks are propagated
from root device to leaf devices. By adding a .prepare callback at the
SoundWire link level, we can double-check the pm_runtime status of the
device as well as its parent PCI device. When the problematic
configuration is detected, the device is pm_runtime resumed - which by
construction also resume its parent.
An additional loop is added to resume all child devices. In theory we
only need to restart the link, but doing so will also cause the
physical devices to synchronize and re-initialize, while their Linux
devices remain pm_runtime suspended. It's simpler to make sure the
codec devices are fully resumed so that we don't have to deal with
zombie states.
This additional loop could have been avoided by adding a .prepare
callback in SoundWire codec drivers. Functionally this would have been
equivalent. The rationale for implementing a loop at the link level is
only to reduce the amount of code required to deal at the codec level
with an Intel corner case - in other words keep codec drivers
independent from Intel platform-specific programming sequences.
BugLink: https://github.com/thesofproject/linux/issues/2606
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818024954.16873-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire Linux devices are created purely based on information
provided by platform firmware (e.g. ACPI DSDT table). When the kernel
finds a matching driver for the device address (_ADR), the probe will
initialize required data structures and initialize pm ops.
When the SoundWire link is started at a later point, the physical
devices will synchronize on the SoundWire frames and report their
attachment status, thereby triggering the enumeration and
initialization of device registers.
This two-step solution was a conscious design decision to allow e.g. a
driver to use sideband mechanisms to turn power rails on. This can
also allow OEMs to describe multiple platforms with the same DSDT
table, the devices that are not physically present in hardware.
The drawback of this approach is a bit of confusion, with more devices
than are actually present in hardware. This results in 'ghost'
devices, for which the driver successfully probes, but that will not
generate any traffic on the bus. suspend-resume transitions are
handled by drivers, and skipped when the devices are not physically
present.
This patch provides a work-around for a second-level of confusion in
platform firmware: some platforms only use HDaudio links, but
nevertheless expose SoundWire 'ghost' devices. This results in error
messages in the Intel driver while trying to suspend/resume these
links. The simplest solution is to add a boolean status flag to skip
all suspend/resume/wake sequences if the link was never started.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818024954.16873-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The power down sequence sets the link_up flag as false outside of the
mutex_lock. This is potentially unsafe.
In additional the flow in that sequence can be improved by first
testing if the link was powered, setting the link_up flag as false and
proceeding with the power down. In case the CPA bits cannot be
cleared, we only flag an error since we cannot deal with interrupts
any longer.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818024954.16873-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This crash was observed with a failed assertion on device close:
BTRFS: Transaction aborted (error -28)
WARNING: CPU: 1 PID: 3902 at fs/btrfs/extent-tree.c:2150 btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c crc32c_intel xor zstd_decompress zstd_compress xxhash lzo_compress lzo_decompress raid6_pq loop
CPU: 1 PID: 3902 Comm: kworker/u8:4 Not tainted 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
RIP: 0010:btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
RSP: 0018:ffffb7a5452d7d80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff97834176a378 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff97835195d388
R13: 0000000005b08000 R14: ffff978385484000 R15: 000000000000016c
FS: 0000000000000000(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190d003fe8 CR3: 000000002a81e005 CR4: 0000000000170ea0
Call Trace:
flush_space+0x197/0x2f0 [btrfs]
btrfs_async_reclaim_metadata_space+0x139/0x300 [btrfs]
process_one_work+0x262/0x5e0
worker_thread+0x4c/0x320
? process_one_work+0x5e0/0x5e0
kthread+0x144/0x170
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
irq event stamp: 19334989
hardirqs last enabled at (19334997): [<ffffffffab0e0c87>] console_unlock+0x2b7/0x400
hardirqs last disabled at (19335006): [<ffffffffab0e0d0d>] console_unlock+0x33d/0x400
softirqs last enabled at (19334900): [<ffffffffaba0030d>] __do_softirq+0x30d/0x574
softirqs last disabled at (19334893): [<ffffffffab0721ec>] irq_exit_rcu+0x12c/0x140
---[ end trace 45939e308e0dd3c7 ]---
BTRFS: error (device vdd) in btrfs_run_delayed_refs:2150: errno=-28 No space left
BTRFS info (device vdd): forced readonly
BTRFS warning (device vdd): failed setting block group ro: -30
BTRFS info (device vdd): suspending dev_replace for unmount
assertion failed: !test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state), in fs/btrfs/volumes.c:1150
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 3982 Comm: umount Tainted: G W 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
RSP: 0018:ffffb7a5454c7db8 EFLAGS: 00010246
RAX: 0000000000000068 RBX: ffff978364b91c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff9783523a4c00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9783523a4d18
R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000003
FS: 00007f61c8f42800(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190cffa810 CR3: 0000000030b96002 CR4: 0000000000170ea0
Call Trace:
btrfs_close_one_device.cold+0x11/0x55 [btrfs]
close_fs_devices+0x44/0xb0 [btrfs]
btrfs_close_devices+0x48/0x160 [btrfs]
generic_shutdown_super+0x69/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x2c/0xa0
cleanup_mnt+0x144/0x1b0
task_work_run+0x59/0xa0
exit_to_user_mode_loop+0xe7/0xf0
exit_to_user_mode_prepare+0xaf/0xf0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x4a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:
close_ctree():
btrfs_dev_replace_suspend_for_unmount();
btrfs_close_devices():
btrfs_close_fs_devices():
btrfs_close_one_device():
ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
&device->dev_state));
However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.
To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: b2a6166768 ("btrfs: fix rw device counting in __btrfs_free_extra_devids")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Retrieve OF match data, it's better and cleaner to use
'of_device_get_match_data' over 'of_match_device'.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Retrieve OF match data, it's better and cleaner to use
'of_device_get_match_data' over 'of_match_device'.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the functionality into ttm_tt_fini and ttm_bo_tt_destroy instead.
We don't need this any more since we removed the unbind from the destroy
code paths in the drivers.
Also add a warning to ttm_tt_fini() if we try to fini a still populated TT
object.
v2: instead of reverting the patch move the functionality to different
places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-5-christian.koenig@amd.com
Doing this in radeon_ttm_tt_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-4-christian.koenig@amd.com
Pull regression fix for the operating performance points (OPP)
framework for v5.15 from Viresh Kumar:
"This fixes regression in the OPP core for a corner case."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: core: Check for pending links before reading required_opp pointers
Doing this in nouveau_ttm_tt_destroy()/nouveau_sgdma_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-3-christian.koenig@amd.com
Doing this in amdgpu_ttm_backend_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-2-christian.koenig@amd.com
Doing this in vmw_ttm_destroy() is to late.
It turned out that this is not a good idea at all because it leaves pointers
to freed up system memory pages in the GART tables of the drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728130552.2074-1-christian.koenig@amd.com
Oleksij Rempel says:
====================
asix fixes
changes v2:
- rebase against current net
- add one more fix for the ax88178 variant
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix crash on reboot on a system with ASIX AX88178 USB adapter attached
to it:
| asix 1-1.4:1.0 eth0: unregister 'asix' usb-ci_hdrc.0-1.4, ASIX AX88178 USB 2.0 Ethernet
| 8<--- cut here ---
| Unable to handle kernel NULL pointer dereference at virtual address 0000028c
| pgd = 5ec93aee
| [0000028c] *pgd=00000000
| Internal error: Oops: 5 [#1] PREEMPT SMP ARM
| Modules linked in:
| CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.14.0-rc1-20210811-1 #4
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| PC is at phy_disconnect+0x8/0x48
| LR is at ax88772_unbind+0x14/0x20
| [<80650d04>] (phy_disconnect) from [<80741aa4>] (ax88772_unbind+0x14/0x20)
| [<80741aa4>] (ax88772_unbind) from [<8074e250>] (usbnet_disconnect+0x48/0xd8)
| [<8074e250>] (usbnet_disconnect) from [<807655e0>] (usb_unbind_interface+0x78/0x25c)
| [<807655e0>] (usb_unbind_interface) from [<805b03a0>] (__device_release_driver+0x154/0x20c)
| [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c)
| [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8)
| [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0)
| [<805ab26c>] (device_del) from [<807634a4>] (usb_disable_device+0xcc/0x178)
| [<807634a4>] (usb_disable_device) from [<8075a060>] (usb_disconnect+0xd8/0x238)
| [<8075a060>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238)
| [<8075a02c>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238)
| [<8075a02c>] (usb_disconnect) from [<80af3520>] (usb_remove_hcd+0xa0/0x198)
| [<80af3520>] (usb_remove_hcd) from [<807902e0>] (host_stop+0x38/0xa8)
| [<807902e0>] (host_stop) from [<8078d9e4>] (ci_hdrc_remove+0x3c/0x118)
| [<8078d9e4>] (ci_hdrc_remove) from [<805b27ec>] (platform_remove+0x20/0x50)
| [<805b27ec>] (platform_remove) from [<805b03a0>] (__device_release_driver+0x154/0x20c)
| [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c)
| [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8)
| [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0)
For this adapter we call ax88178_bind() and ax88772_unbind(), which is
related to different chip version and different counter part *bind()
function.
Since this chip is currently not ported to the PHYLIB, we do not need to
call phy_disconnect() here. So, to fix this crash, we need to add
ax88178_unbind().
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Reported-by: Robin van der Gracht <robin@protonic.nl>
Tested-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some HW revisions need additional MAC configuration before the embedded PHY
can be enabled. If this is not done, we won't be able to get response
from the internal PHY.
This issue was detected on chipcode == AX_AX88772_CHIPCODE variant,
where ax88772_hw_reset() was executed with missing embd_phy flag.
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We worked around the breakage of PCM buffer setup by the commit
65ca89c2b1 ("ASoC: intel: atom: Fix breakage for PCM buffer address
setup"), but this isn't necessary since the CONTINUOUS buffer type
also sets runtime->dma_addr since commit f84ba106a0 ("ALSA:
memalloc: Store snd_dma_buffer.addr for continuous pages, too").
Let's revert the change again.
Link: https://lore.kernel.org/r/20210822072127.9786-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a trivial warning for the indentation by putting an empty line:
Documentation/sound/alsa-configuration.rst:2258: WARNING: Unexpected indentation.
Fixes: a39978ed6d ("ALSA: doc: Add the description of quirk_flags option for snd-usb-audio")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20210823113518.30134-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When parsing the ExtendedAttr data, malicous or corrupt attribute length
could cause kernel hangs and buffer overruns in some special cases.
Link: https://lore.kernel.org/r/20210822093332.25234-1-stian.skjelstad@gmail.com
Signed-off-by: Stian Skjelstad <stian.skjelstad@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Depending on register assignment by the compiler:
{standard input}:3084: Error: operands mismatch -- statement `andl %a1,%d1' ignored
{standard input}:3145: Error: operands mismatch -- statement `orl %a1,%d1' ignored
{standard input}:3195: Error: operands mismatch -- statement `eorl %a1,%d1' ignored
Indeed, the first operand must not be an address register. However, it
can be an immediate value. Fix this by adjusting the register
constraint from "g" (general purpose register) to "di" (data register or
immediate).
Fixes: e39d88ea3c ("locking/atomic, arch/m68k: Implement atomic_fetch_{add,sub,and,or,xor}()")
Fixes: d839bae426 ("locking,arch,m68k: Fold atomic_ops")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210809112903.3898660-1-geert@linux-m68k.org
btrfs_lookup_ordered_extent() is supposed to query the offset in a file
instead of the logical address. Pass the file offset from
submit_extent_page() to calc_bio_boundaries().
Also, calc_bio_boundaries() relies on the bio's operation flag, so move
the call site after setting it.
Fixes: 390ed29b81 ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A common characteristic of the bug report where preemptive flushing was
going full tilt was the fact that the vast majority of the free metadata
space was used up by the global reserve. The hard 90% threshold would
cover the majority of these cases, but to be even smarter we should take
into account how much of the outstanding reservations are covered by the
global block reserve. If the global block reserve accounts for the vast
majority of outstanding reservations, skip preemptive flushing, as it
will likely just cause churn and pain.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The preemptive flushing code was added in order to avoid needing to
synchronously wait for ENOSPC flushing to recover space. Once we're
almost full however we can essentially flush constantly. We were using
98% as a threshold to determine if we were simply full, however in
practice this is a really high bar to hit. For example reports of
systems running into this problem had around 94% usage and thus
continued to flush. Fix this by lowering the threshold to 90%, which is
a more sane value, especially for smaller file systems.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
CC: stable@vger.kernel.org # 5.12+
Fixes: 576fa34830 ("btrfs: improve preemptive background space flushing")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_lookup_data_extent calls btrfs_search_slot to verify if
the EXTENT_ITEM exists in the extent tree. btrfs_search_slot can return
values bellow zero if an error happened.
Function replay_one_extent currently checks if the search found
something (0 returned) and increments the reference, and if not, it
seems to evaluate as 'not found'.
Fix the condition by checking if the value was bellow zero and return
early.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several cases where when logging an inode we need to log its
parent directories or logging subdirectories when logging a directory.
There are cases however where we end up logging a directory even if it was
not changed in the current transaction, no dentries added or removed since
the last transaction. While this is harmless from a functional point of
view, it is a waste time as it brings no advantage.
One example where this is triggered is the following:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/A
$ mkdir /mnt/B
$ mkdir /mnt/C
$ touch /mnt/A/foo
$ ln /mnt/A/foo /mnt/B/bar
$ ln /mnt/A/foo /mnt/C/baz
$ sync
$ rm -f /mnt/A/foo
$ xfs_io -c "fsync" /mnt/B/bar
This last fsync ends up logging directories A, B and C, however we only
need to log directory A, as B and C were not changed since the last
transaction commit.
So fix this by changing need_log_inode(), to return false in case the
given inode is a directory and has a ->last_trans value smaller than the
current transaction's ID.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we converted btrfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag. We only need to raise this flag on the btrfs_root_fs_type
filesystem since btrfs_mount_root() is ultimately responsible for
allocating the superblock and is called into from btrfs_mount()
associated with btrfs_fs_type.
The conversion of the btrfs inode operations was straightforward.
Regarding btrfs specific ioctls that perform checks based on inode
permissions only those have been allowed that are not filesystem wide
operations and hence can be reasonably charged against a specific mount.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the ACL code idmapped mount aware. The POSIX default and POSIX
access ACLs are the only ACLs other than some specific xattrs that take
DAC permissions into account. On an idmapped mount they need to be
translated according to the mount's userns. The main change is done to
__btrfs_set_acl() which is responsible for translating POSIX ACLs to
their final on-disk representation.
The btrfs_init_acl() helper does not need to take the idmapped mount
into account since it is called in the context of file creation
operations (mknod, create, mkdir, symlink, tmpfile) and is used for
btrfs_init_inode_security() to copy POSIX default and POSIX access
permissions from the parent directory. These ACLs need to be inherited
unmodified from the parent directory. This is identical to what we do
for ext4 and xfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The INO_LOOKUP_USER is an unprivileged version of the INO_LOOKUP ioctl
and has the following restrictions. The main difference between the two
is that INO_LOOKUP is filesystem wide operation wheres INO_LOOKUP_USER
is scoped beneath the file descriptor passed with the ioctl.
Specifically, INO_LOOKUP_USER must adhere to the following restrictions:
- The caller must be privileged over each inode of each path component
for the path they are trying to lookup.
- The path for the subvolume the caller is trying to lookup must be reachable
from the inode associated with the file descriptor passed with the ioctl.
The second condition makes it possible to scope the lookup of the path
to the mount identified by the file descriptor passed with the ioctl.
This allows us to enable this ioctl on idmapped mounts.
Specifically, this is possible because all child subvolumes of a parent
subvolume are reachable when the parent subvolume is mounted. So if the
user had access to open the parent subvolume or has been given the fd
then they can lookup the path if they had access to it provided they
were privileged over each path component.
Note, the INO_LOOKUP_USER ioctl allows a user to learn the path and name
of a subvolume even though they would otherwise be restricted from doing
so via regular VFS-based lookup.
So think about a parent subvolume with multiple child subvolumes.
Someone could mount he parent subvolume and restrict access to the child
subvolumes by overmounting them with empty directories. At this point
the user can't traverse the child subvolumes and they can't open files
in the child subvolumes. However, they can still learn the path of
child subvolumes as long as they have access to the parent subvolume by
using the INO_LOOKUP_USER ioctl.
The underlying assumption here is that it's ok that the lookup ioctls
can't really take mounts into account other than the original mount the
fd belongs to during lookup. Since this assumption is baked into the
original INO_LOOKUP_USER ioctl we can extend it to idmapped mounts.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Setting flags on subvolumes or snapshots are core features of btrfs. The
SUBVOL_SETFLAGS ioctl is especially important as it allows to make
subvolumes and snapshots read-only or read-write. Allow setting flags on
btrfs subvolumes and snapshots on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The SET_RECEIVED_SUBVOL ioctls are used to set information about
a received subvolume. Make it possible to set information about a
received subvolume on idmapped mounts. This is a fairly straightforward
operation since all the permission checking helpers are already capable
of handling idmapped mounts. So we just need to pass down the mount's
userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So far we prevented the deletion of subvolumes and snapshots using
subvolume ids possible with the BTRFS_SUBVOL_SPEC_BY_ID flag.
This restriction is necessary on idmapped mounts as this allows
filesystem wide subvolume and snapshot deletions and thus can escape the
scope of what's exposed under the mount identified by the fd passed with
the ioctl.
Deletion by subvolume id works by looking for an alias of the parent of
the subvolume or snapshot to be deleted. The parent alias can be
anywhere in the filesystem. However, as long as the alias of the parent
that is found is the same as the one identified by the file descriptor
passed through the ioctl we can allow the deletion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Destroying subvolumes and snapshots are important features of btrfs.
Both operations are available to unprivileged users if the filesystem
has been mounted with the "user_subvol_rm_allowed" mount option. Allow
subvolume and snapshot deletion on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Subvolumes and snapshots can either be deleted by specifying their name
or - if BTRFS_IOC_SNAP_DESTROY_V2 is used - by their subvolume or
snapshot id if the BTRFS_SUBVOL_SPEC_BY_ID is set.
This feature is blocked on idmapped mounts as this allows filesystem
wide subvolume deletions and thus can escape the scope of what's exposed
under the mount identified by the fd passed with the ioctl.
This means that even the root or CAP_SYS_ADMIN capable user can't delete
a subvolume via BTRFS_SUBVOL_SPEC_BY_ID. This is intentional.
The root user is currently already subject to permission checks in
btrfs_may_delete() including whether the inode's i_uid/i_gid of the
directory the subvolume is located in have a mapping in the caller's
idmapping. For this to fail isn't currently possible since a btrfs
filesystem can't be mounted with a non-initial idmapping but it shows
that even the root user would fail to delete a subvolume if the relevant
inode isn't mapped in their idmapping. The idmapped mount case is the
same in principle.
This isn't a huge problem a root user wanting to delete arbitrary
subvolumes can just always create another (even detached) mount without
an idmapping attached.
In addition, we will allow BTRFS_SUBVOL_SPEC_BY_ID for cases where the
subvolume to delete is directly located under inode referenced by the fd
passed for the ioctl() in a follow-up commit.
Here is an example where a btrfs subvolume is deleted through a
subvolume mount that does not expose the subvolume to be delete but it
can still be deleted by using the subvolume id:
/* Compile the following program as "delete_by_spec". */
#define _GNU_SOURCE
#include <fcntl.h>
#include <inttypes.h>
#include <linux/btrfs.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
static int rm_subvolume_by_id(int fd, uint64_t subvolid)
{
struct btrfs_ioctl_vol_args_v2 args = {};
int ret;
args.flags = BTRFS_SUBVOL_SPEC_BY_ID;
args.subvolid = subvolid;
ret = ioctl(fd, BTRFS_IOC_SNAP_DESTROY_V2, &args);
if (ret < 0)
return -1;
return 0;
}
int main(int argc, char *argv[])
{
int subvolid = 0;
if (argc < 3)
exit(1);
fprintf(stderr, "Opening %s\n", argv[1]);
int fd = open(argv[1], O_CLOEXEC | O_DIRECTORY);
if (fd < 0)
exit(2);
subvolid = atoi(argv[2]);
fprintf(stderr, "Deleting subvolume with subvolid %d\n", subvolid);
int ret = rm_subvolume_by_id(fd, subvolid);
if (ret < 0)
exit(3);
exit(0);
}
#include <stdio.h>"
#include <stdlib.h>"
#include <linux/btrfs.h"
truncate -s 10G btrfs.img
mkfs.btrfs btrfs.img
export LOOPDEV=$(sudo losetup -f --show btrfs.img)
mount ${LOOPDEV} /mnt
sudo chown $(id -u):$(id -g) /mnt
btrfs subvolume create /mnt/A
btrfs subvolume create /mnt/B/C
# Get subvolume id via:
sudo btrfs subvolume show /mnt/A
# Save subvolid
SUBVOLID=<nr>
sudo umount /mnt
sudo mount ${LOOPDEV} -o subvol=B/C,user_subvol_rm_allowed /mnt
./delete_by_spec /mnt ${SUBVOLID}
With idmapped mounts this can potentially be used by users to delete
subvolumes/snapshots they would otherwise not have access to as the
idmapping would be applied to an inode that is not exposed in the mount
of the subvolume.
The fact that this is a filesystem wide operation suggests it might be a
good idea to expose this under a separate ioctl that clearly indicates
this. In essence, the file descriptor passed with the ioctl is merely
used to identify the filesystem on which to operate when
BTRFS_SUBVOL_SPEC_BY_ID is used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Creating subvolumes and snapshots is one of the core features of btrfs
and is even available to unprivileged users. Make it possible to use
subvolume and snapshot creation on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a new subvolume is created btrfs currently doesn't check whether
the fsgid/fsuid of the caller actually have a mapping in the user
namespace attached to the filesystem. The VFS always checks this to make
sure that the caller's fsgid/fsuid can be represented on-disk. This is
most relevant for filesystems that can be mounted inside user namespaces
but it is in general a good hardening measure to prevent unrepresentable
gid/uid from being written to disk.
Since we want to support idmapped mounts for btrfs ioctls to create
subvolumes in follow-up patches this becomes important since we want to
make sure the fsgid/fsuid of the caller as mapped according to the
idmapped mount can be represented on-disk. Simply add the missing
fsuidgid_has_mapping() line from the VFS may_create() version to
btrfs_may_create().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_tmpfile() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_symlink() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mkdir() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_create() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mknod() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_rename() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>