Commit graph

1,089,026 commits

Author SHA1 Message Date
Bob Peterson
70c11ba8f2 gfs2: Don't release and reacquire local statfs bh
Before this patch, several functions in gfs2 related to the updating
of the statfs file used a newly acquired/read buffer_head for the
local statfs file. This is completely unnecessary, because other nodes
should never update it. Recreating the buffer is a waste of time.

This patch allows gfs2 to read in the local statefs buffer_head at
mount time and keep it around until unmount time.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2021-08-20 09:03:46 -05:00
Marc Zyngier
acdcfd94ef Merge branch irq/misc-5.15 into irq/irqchip-next
* irq/misc-5.15:
  : .
  : Various irqchip fixes:
  :
  : - Fix edge interrupt support on loongson systems
  : - Advertise lack of wake-up logic on mtk-sysirq
  : - Fix mask tracking on the Apple AIC
  : - Correct priority reading of arm64 pseudo-NMI when SCR_EL3.FIQ==0
  : .
  irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
  irqchip/apple-aic: Fix irq_disable from within irq handlers

Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-08-20 15:03:40 +01:00
Chen-Yu Tsai
8d474deaba irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
When non-secure priorities are used, compared to the raw priority set,
the value read back from RPR is also right-shifted by one and the
highest bit set.

Add a macro to do the modifications to the raw priority when doing the
comparison against the RPR value. This corrects the pseudo-NMI behavior
when non-secure priorities in the GIC are used. Tested on 5.10 with
the "IPI as pseudo-NMI" series [1] applied on MT8195.

[1] https://lore.kernel.org/linux-arm-kernel/1604317487-14543-1-git-send-email-sumit.garg@linaro.org/

Fixes: 3367805909 ("irqchip/gic-v3: Support pseudo-NMIs when SCR_EL3.FIQ == 0")
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
[maz: Added comment contributed by Alex]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210811171505.1502090-1-wenst@chromium.org
2021-08-20 15:03:01 +01:00
Bob Peterson
a28dc123fa gfs2: init system threads before freeze lock
Patch 96b1454f2e ("gfs2: move freeze glock outside the make_fs_rw and _ro
functions") changed the gfs2 mount sequence so that it holds the freeze
lock before calling gfs2_make_fs_rw. Before this patch, gfs2_make_fs_rw
called init_threads to initialize the quotad and logd threads. That is a
problem if the system needs to withdraw due to IO errors early in the
mount sequence, for example, while initializing the system statfs inode:

1. An IO error causes the statfs glock to not sync properly after
   recovery, and leaves items on the ail list.
2. The leftover items on the ail list causes its do_xmote call to fail,
   which makes it want to withdraw. But since the glock code cannot
   withdraw (because the withdraw sequence uses glocks) it relies upon
   the logd daemon to initiate the withdraw.
3. The withdraw can never be performed by the logd daemon because all
   this takes place before the logd daemon is started.

This patch moves function init_threads from super.c to ops_fstype.c
and it changes gfs2_fill_super to start its threads before holding the
freeze lock, and if there's an error, stop its threads after releasing
it. This allows the logd to run unblocked by the freeze lock. Thus,
the logd daemon can perform its withdraw sequence properly.

Fixes: 96b1454f2e ("gfs2: move freeze glock outside the make_fs_rw and _ro functions")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2021-08-20 09:01:02 -05:00
David S. Miller
0ba218e253 Merge branch 'bridge-vlan'
Nikolay Aleksandrov says:

====================
net: bridge: mcast: add support for port/vlan router control

This small set adds control over port/vlan mcast router config.
Initially I had added host vlan entry router control via vlan's global
options but that is really unnecessary and we can use a single per-vlan
option to control it both for port/vlan and host/vlan entries. Since
it's all still in net-next we can convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER
to BRIDGE_VLANDB_ENTRY_MCAST_ROUTER and use it for both. That makes much
more sense and is easier for user-space. Patch 01 prepares the port
router function to be used with port mcast context instead of port and
then patch 02 converts the global vlan mcast router option to per-vlan
mcast router option which directly gives us both host/vlan and port/vlan
mcast router control without any additional changes.

This way we get the following coherent syntax:
 [ port/vlan mcast router]
 $ bridge vlan set vid 100 dev ens20 mcast_router 2

 [ bridge/vlan mcast router ]
 $ bridge vlan set vid 100 dev bridge mcast_router 2
instead of:
 $ bridge vlan set vid 100 dev bridge mcast_router 1 global

The mcast_router should not be regarded as a global option, it controls
the port/vlan and bridge/vlan mcast router behaviour.

This is the last set needed for the initial per-vlan mcast support.
Next patch-sets:
 - iproute2 support
 - selftests
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 15:00:35 +01:00
Nikolay Aleksandrov
2796d846d7 net: bridge: vlan: convert mcast router global option to per-vlan entry
The per-vlan router option controls the port/vlan and host vlan entries'
mcast router config. The global option controlled only the host vlan
config, but that is unnecessary and incosistent as it's not really a
global vlan option, but rather bridge option to control host router
config, so convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to
BRIDGE_VLANDB_ENTRY_MCAST_ROUTER which can be used to control both host
vlan and port vlan mcast router config.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 15:00:35 +01:00
Nikolay Aleksandrov
a53581d555 net: bridge: mcast: br_multicast_set_port_router takes multicast context as argument
Change br_multicast_set_port_router to take port multicast context as
its first argument so we can later use it to control port/vlan mcast
router option.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 15:00:35 +01:00
Sunil Goutham
a515e5b53c octeontx2-pf: Add check for non zero mcam flows
This patch ensures that mcam flows are allocated
before adding or destroying the flows.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:57:59 +01:00
Petko Manolov
ffc9c3ebb4 net: usb: pegasus: fixes of set_register(s) return value evaluation;
- restore the behavior in enable_net_traffic() to avoid regressions - Jakub
    Kicinski;
  - hurried up and removed redundant assignment in pegasus_open() before yet
    another checker complains;

Fixes: 8a160e2e9a ("net: usb: pegasus: Check the return value of get_geristers() and friends;")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:57:05 +01:00
jing yangyang
fa16ee7736 tools/net: Use bitwise instead of arithmetic operator for flags
This silences the following coccinelle warning:

"WARNING: sum of probable bitmasks, consider |"

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:55:53 +01:00
Ville Syrjälä
2670ff5c72 drm/i915/fbc: Polish the skl+ FBC stride override handling
Polish the FBC stride override stuff:
- just call it override_cfb_stride since it'll be used on
  more gens later
- Use REG_BIT() & co. for the registers and give everything
  CHICKEN_ prefix since glk+ will have a different register
  for this
- Use intel_de_rmw() for the RMW

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702204603.596-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-08-20 16:50:26 +03:00
Ville Syrjälä
cd4891e4f7 drm/i915/fbc: Move the "recompress on activate" to a central place
On ILK+ we current do a nuke right after activating FBC. If my
memory isn't playing tricks on me this is actially required if
FBC didn't stay disabled for a full frame. In that case the
deactivate+reactivate may not invalidate the cfb. I'd have to
double chekc to be sure though.

So let's keep the nuke, and just extend it backwards to cover
all the platforms by doing it a bit higher up.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702204603.596-4-ville.syrjala@linux.intel.com
2021-08-20 16:49:30 +03:00
Ville Syrjälä
287d00d413 drm/i915/fbc: Extract intel_fbc_update()
Pull the fbc enable vs. disable stuff into a small helper so
we don't have to have it pollute the higher level modeset code.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702204603.596-3-ville.syrjala@linux.intel.com
2021-08-20 16:48:51 +03:00
Ville Syrjälä
faca22fd50 drm/i915/fbc: Rewrite the FBC tiling check a bit
Write the tiling check in a nicer form. No functional
changes due to Y-tile scanout being a gen9+ feature.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702204603.596-2-ville.syrjala@linux.intel.com
2021-08-20 16:48:35 +03:00
David S. Miller
c1125062fb Merge branch 'ipa-kill-off-ipa_clock_get'
Alex Elder says:

====================
net: ipa: kill off ipa_clock_get()

This series replaces the remaining uses of ipa_clock_get() with
calls to pm_runtime_get_sync() instead.  It replaces all calls to
ipa_clock_put() with calls to pm_runtime_put().

This completes the preparation for enabling automated suspend under
the control of the power management core code.  The next patch (in
an upcoming series) enables that.  Then the "ipa_clock" files and
symbols will switch to using an "ipa_power" naming convention instead.

Additional info

It is possible for pm_runtime_get_sync() to return an error.  There
are really three cases, identified by return value:
  - 1, meaning power was already active
  - 0, meaning power was not previously active, but is now
  - EACCES, meaning runtime PM is disabled
One additional case is EINVAL, meaning a previous suspend or resume
(or idle) call returned an error.  But we have always assumed this
won't happen (we previously didn't even check for an error).

But because we use pm_runtime_force_suspend() to implement system
suspend, there's a chance we'd get an EACCES error (the first thing
that function does is disable runtime suspend).  Individual patches
explain what happens in that case, but generally we just accept that
it could be an unlikely problem (occurring only at startup time).

Similarly, pm_runtime_put() could return an error.  There too, we
ignore EINVAL, assuming the IPA suspend and resume operations won't
produce an error.  EBUSY and EPERM are not applicable, EAGAIN is not
expected (and harmless).  We should never get EACCES (runtime
suspend disabled), because pm_runtime_put() calls match prior
pm_runtime_get_sync() calls, and a system suspend will not be
started while a runtime suspend or resume is underway.  In summary,
the value returned from pm_runtime_put() is not meaningful, so we
explicitly ignore it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:45:48 +01:00
Alex Elder
c3f115aa5e net: ipa: kill ipa_clock_get()
The only remaining user of the ipa_clock_{get,put}() interface is
ipa_isr_thread().  Replace calls to ipa_clock_get() there calling
pm_runtime_get_sync() instead.  And call pm_runtime_put() there
rather than ipa_clock_put().  Warn if we ever get an error.

With that, we can get rid of ipa_clock_get() and ipa_clock_put().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:45:47 +01:00
Alex Elder
724c2d7436 net: ipa: don't use ipa_clock_get() in "ipa_modem.c"
When we open or close the modem network device we need to ensure the
hardware is powered.  Replace the callers of ipa_clock_get() found
in ipa_open() and ipa_stop() with calls to pm_runtime_get_sync().
If an error is returned, simply return that error to the caller
(without any error or warning message).  This could conceivably
occur if the function was called while the system was suspended,
but that really shouldn't happen.  Replace corresponding calls to
ipa_clock_put() with pm_runtime_put() also.

If the modem crashes we also need to ensure the hardware is powered
to recover.  If getting power returns an error there's not much we
can do, but at least report the error.  (Ideally the remoteproc SSR
code would ensure the AP was not suspended when it sends the
notification, but that is not (yet) the case.)

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:45:47 +01:00
Alex Elder
799c5c24b7 net: ipa: don't use ipa_clock_get() in "ipa_uc.c"
Replace the ipa_clock_get() call in ipa_uc_clock() when taking the
"proxy" clock reference for the microcontroller with a call to
pm_runtime_get_sync().  Replace calls of ipa_clock_put() for the
microcontroller with pm_runtime_put() calls instead.

There is a chance we get an error when taking the microcontroller
power reference.  This is an unlikely scenario, where system suspend
is initiated just before we learn the modem is booting.  For now
we'll just accept that this could occur, and report it if it does.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:45:47 +01:00
Alex Elder
c43adc75dc net: ipa: don't use ipa_clock_get() in "ipa_smp2p.c"
If the "modem-init" Device Tree property is present for a platform,
the modem performs early IPA hardware initialization, and signals
this is complete with an "ipa-setup-ready" SMP2P interrupt.  This
triggers a call to ipa_setup(), which requires the hardware to be
powered.

Replace the call to ipa_clock_get() in this case with a call to
pm_runtime_get_sync().  And replace the corresponding calls to
ipa_clock_put() with calls to pm_runtime_put() instead.

There is a chance we get an error when taking this power reference.
This is an unlikely scenario, where system suspend is initiated just
before the modem signals it has finished initializing the IPA
hardware.  For now we'll just accept that this could occur, and
report it if it does.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:45:47 +01:00
Alex Elder
4c6a4da844 net: ipa: don't use ipa_clock_get() in "ipa_main.c"
We need the hardware to be powered starting at the config stage of
initialization when the IPA driver probes.  And we need it powered
when the driver is removed, at least until the deconfig stage has
completed.

Replace callers of ipa_clock_get() in ipa_probe() and ipa_exit(),
calling pm_runtime_get_sync() instead.  Replace the corresponding
callers of ipa_clock_put(), calling pm_runtime_put() instead.

The only error we expect when getting power would occur when the
system is suspended.  The ->probe and ->remove driver callbacks
won't be called when suspended, so issue a WARN() call if an error
is seen getting power.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:45:47 +01:00
Alex Elder
b8e36e13ea net: ipa: fix TX queue race
Jakub Kicinski pointed out a race condition in ipa_start_xmit() in a
recently-accepted series of patches:
  https://lore.kernel.org/netdev/20210812195035.2816276-1-elder@linaro.org/
We are stopping the modem TX queue in that function if the power
state is not active.  We restart the TX queue again once hardware
resume is complete.

  TX path                       Power Management
  -------                       ----------------
  pm_runtime_get(); no power    Start resume
  Stop TX queue                      ...
  pm_runtime_put()              Resume complete
  return NETDEV_TX_BUSY         Start TX queue

  pm_runtime_get()
  Power present, transmit
  pm_runtime_put()              (auto-suspend)

The issue is that the power management (resume) activity and the
network transmit activity can occur concurrently, and there's a
chance the queue will be stopped *after* it has been started again.

  TX path                       Power Management
  -------                       ----------------
                                Resume underway
  pm_runtime_get(); no power         ...
                                Resume complete
                                Start TX queue
  Stop TX queue       <-- No more transmits after this
  pm_runtime_put()
  return NETDEV_TX_BUSY

We address this using a STARTED flag to indicate when the TX queue
has been started from the resume path, and a spinlock to make the
flag and queue updates happen atomically.

  TX path                       Power Management
  -------                       ----------------
                                Resume underway
  pm_runtime_get(); no power    Resume complete
                                start TX queue     \
  If STARTED flag is *not* set:                     > atomic
      Stop TX queue             set STARTED flag   /
  pm_runtime_put()
  return NETDEV_TX_BUSY

A second flag is used to address a different race that involves
another path requesting power.

  TX path            Other path              Power Management
  -------            ----------              ----------------
                     pm_runtime_get_sync()   Resume
                                             Start TX queue   \ atomic
                                             Set STARTED flag /
                     (do its thing)
                     pm_runtime_put()
                                             (auto-suspend)
  pm_runtime_get()                           Mark delayed resume
  STARTED *is* set, so
    do *not* stop TX queue  <-- Queue should be stopped here
  pm_runtime_put()
  return NETDEV_TX_BUSY                      Suspend done, resume
                                             Resume complete
  pm_runtime_get()
  Stop TX queue
    (STARTED is *not* set)                   Start TX queue   \ atomic
  pm_runtime_put()                           Set STARTED flag /
  return NETDEV_TX_BUSY

So a STOPPED flag is set in the transmit path when it has stopped
the TX queue, and this pair of operations is also protected by the
spinlock.  The resume path only restarts the TX queue if the STOPPED
flag is set.  This case isn't a major problem, but it avoids the
"non-trivial amount of useless work" done by the networking stack
when NETDEV_TX_BUSY is returned.

Fixes: 6b51f802d6 ("net: ipa: ensure hardware has power in ipa_start_xmit()")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:43:39 +01:00
Xiaolong Huang
7e78c597c3 net: qrtr: fix another OOB Read in qrtr_endpoint_post
This check was incomplete, did not consider size is 0:

	if (len != ALIGN(size, 4) + hdrlen)
                    goto err;

if size from qrtr_hdr is 0, the result of ALIGN(size, 4)
will be 0, In case of len == hdrlen and size == 0
in header this check won't fail and

	if (cb->type == QRTR_TYPE_NEW_SERVER) {
                /* Remote node endpoint can bridge other distant nodes */
                const struct qrtr_ctrl_pkt *pkt = data + hdrlen;

                qrtr_node_assign(node, le32_to_cpu(pkt->server.node));
        }

will also read out of bound from data, which is hdrlen allocated block.

Fixes: 194ccc8829 ("net: qrtr: Support decoding incoming v2 packets")
Fixes: ad9d24c942 ("net: qrtr: fix OOB Read in qrtr_endpoint_post")
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:41:03 +01:00
David S. Miller
6505782c93 Merge branch 'ocelot-vlan'
Vladimir Oltean says:

====================
Small ocelot VLAN improvements

This small series propagates some VLAN restrictions via netlink extack
and creates some helper functions instead of open-coding VLAN table
manipulations from multiple places.

This is split from the larger "DSA FDB isolation" series, hence the v2
tag:
https://patchwork.kernel.org/project/netdevbpf/cover/20210818120150.892647-1-vladimir.oltean@nxp.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:39:52 +01:00
Vladimir Oltean
bbf6a2d923 net: mscc: ocelot: use helpers for port VLAN membership
This is a mostly cosmetic patch that creates some helpers for accessing
the VLAN table. These helpers are also a bit more careful in that they
do not modify the ocelot->vlan_mask unless the hardware operation
succeeded.

Not all callers check the return value (the init code doesn't), but anyway.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:39:52 +01:00
Vladimir Oltean
3b95d1b293 net: mscc: ocelot: transmit the VLAN filtering restrictions via extack
We need to transmit more restrictions in future patches, convert this
one to netlink extack.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:39:52 +01:00
Vladimir Oltean
01af940e9b net: mscc: ocelot: transmit the "native VLAN" error via extack
We need to reject some more configurations in future patches, convert
the existing one to netlink extack.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:39:52 +01:00
David S. Miller
f2aea90d0b Merge branch 'ocelot-phylink-fixes'
Vladimir Oltean says:

====================
Ocelot phylink fixes

This series addresses a regression reported by Horatiu which introduced
by the ocelot conversion to phylink: there are broken device trees in
the wild, and the driver fails to probe the entire switch when a port
fails to probe, which it previously did not do.

Continue probing even when some ports fail to initialize properly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:36:42 +01:00
Vladimir Oltean
5c8bb71dbd net: mscc: ocelot: allow probing to continue with ports that fail to register
The existing ocelot device trees, like ocelot_pcb123.dts for example,
have SERDES ports (ports 4 and higher) that do not have status = "disabled";
but on the other hand do not have a phy-handle or a fixed-link either.

So from the perspective of phylink, they have broken DT bindings.

Since the blamed commit, probing for the entire switch will fail when
such a device tree binding is encountered on a port. There used to be
this piece of code which skipped ports without a phy-handle:

	phy_node = of_parse_phandle(portnp, "phy-handle", 0);
	if (!phy_node)
		continue;

but now it is gone.

Anyway, fixed-link setups are a thing which should work out of the box
with phylink, so it would not be in the best interest of the driver to
add that check back.

Instead, let's look at what other drivers do. Since commit 86f8b1c01a
("net: dsa: Do not make user port errors fatal"), DSA continues after a
switch port fails to register, and works only with the ports that
succeeded.

We can achieve the same behavior in ocelot by unregistering the devlink
port for ports where ocelot_port_phylink_create() failed (called via
ocelot_probe_port), and clear the bit in devlink_ports_registered for
that port. This will make the next iteration reconsider the port that
failed to probe as an unused port, and re-register a devlink port of
type UNUSED for it. No other cleanup should need to be performed, since
ocelot_probe_port() should be self-contained when it fails.

Fixes: e6e12df625 ("net: mscc: ocelot: convert to phylink")
Reported-and-tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:36:42 +01:00
Horatiu Vultur
b5e33a1571 net: mscc: ocelot: be able to reuse a devlink_port after teardown
There are cases where we would like to continue probing the switch even
if one port has failed to probe. When that happens, we need to
unregister a devlink_port of type DEVLINK_PORT_FLAVOUR_PHYSICAL and
re-register it of type DEVLINK_PORT_FLAVOUR_UNUSED.

This is fine, except when calling devlink_port_attrs_set on a structure
on which devlink_port_register has been previously called, there is a
WARN_ON in devlink_port_attrs_set that devlink_port->devlink must be
NULL.

So don't assume that the memory behind dlp is clean when calling
ocelot_port_devlink_init, just zero-initialize it.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:36:42 +01:00
David S. Miller
42edc1fca4 Merge branch 'dpaa2-switch-phylikn-fixes'
Vladimir Oltean says:

====================
dpaa2-switch phylink fixes

This is fixing two regressions introduced by the recent conversion of
the dpaa2-switch driver to phylink.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:34:49 +01:00
Vladimir Oltean
860fe1f87e net: dpaa2-switch: call dpaa2_switch_port_disconnect_mac on probe error path
Currently when probing returns an error, the netdev is freed but
phylink_disconnect is not called.

Create a common function between the unbind path and the error path,
call it the opposite of dpaa2_switch_probe_port: dpaa2_switch_remove_port,
and call it from both the unbind and the error path.

Fixes: 84cba72956 ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:34:49 +01:00
Vladimir Oltean
d52ef12f7d net: dpaa2-switch: phylink_disconnect_phy needs rtnl_lock
There is an ASSERT_RTNL in phylink_disconnect_phy which triggers
whenever dpaa2_switch_port_disconnect_mac is called.

To follow the pattern established by dpaa2_eth_disconnect_mac, take the
rtnl_mutex every time we call dpaa2_switch_port_disconnect_mac.

Fixes: 84cba72956 ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:34:49 +01:00
Sven Peter
60a1cd10b2 irqchip/apple-aic: Fix irq_disable from within irq handlers
When disable_irq_nosync for an interrupt is called from within its
interrupt handler, this interrupt is only marked as disabled with the
intention to mask it when it triggers again.
The AIC hardware however automatically masks the interrupt when it is read.
aic_irq_eoi then unmasks it again if it's not disabled *and* not masked.
This results in a state mismatch between the hardware state and the
state kept in irq_data: The hardware interrupt is masked but
IRQD_IRQ_MASKED is not set. Any further calls to unmask_irq will directly
return and the interrupt can never be enabled again.

Fix this by keeping the hardware and irq_data state in sync by unmasking in
aic_irq_eoi if and only if the irq_data state also assumes the interrupt to
be unmasked.

Fixes: 76cde26394 ("irqchip/apple-aic: Add support for the Apple Interrupt Controller")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210812100942.17206-1-sven@svenpeter.dev
2021-08-20 14:32:33 +01:00
David S. Miller
6985157ce8 Merge branch 'gmii2rgmii-loopback'
Gerhard Engleder says:

====================
Add Xilinx GMII2RGMII loopback support

The Xilinx GMII2RGMII driver overrides PHY driver functions in order to
configure the device according to the link speed of the PHY attached to
it. This is implemented for a normal link but not for loopback.

Andrew told me to use phy_loopback and this changes make phy_loopback
work in combination with Xilinx GMII2RGMII.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:31:46 +01:00
Gerhard Engleder
ceaeaafc8b net: phy: gmii2rgmii: Support PHY loopback
Configure speed if loopback is used. read_status is not called for
loopback.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:31:46 +01:00
Gerhard Engleder
3ac8eed625 net: phy: Uniform PHY driver access
struct phy_device contains a pointer to the PHY driver and nearly
everywhere this pointer is used to access the PHY driver. Only
mdio_bus_phy_may_suspend() is still using to_phy_driver() instead of the
PHY driver pointer. Uniform PHY driver access by eliminating
to_phy_driver() use in mdio_bus_phy_may_suspend().

Only phy_bus_match() and phy_probe() are still using to_phy_driver(),
because PHY driver pointer is not available there.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:31:46 +01:00
Gerhard Engleder
4ed311b08a net: phy: Support set_loopback override
phy_read_status and various other PHY functions support PHY specific
overriding of driver functions by using a PHY specific pointer to the
PHY driver. Add support of PHY specific override to phy_loopback too.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:31:46 +01:00
David S. Miller
600003a364 Merge branch 'sparx5-dma'
Steen Hegelund says:

====================
Adding Frame DMA functionality to Sparx5

v2:
    Removed an unused variable (proc_ctrl) from sparx5_fdma_start.

This add frame DMA functionality to the Sparx5 platform.

Until now the Sparx5 SwitchDev driver has been using register based
injection and extraction when sending frames to/from the host CPU.

With this series the Frame DMA functionality now added.

The Frame DMA is only used if the Frame DMA interrupt is configured in the
device tree; otherwise the existing register based injection and extraction
is used.

The Sparx5 has two ports that can be used for sending and receiving frames,
but there are 8 channels that can be configured: 6 for injection and 2 for
extraction.

The additional channels can be used for more advanced scenarios e.g. where
virtual cores are used, but currently the driver only uses port 0 and
channel 0 and 6 respectively.

DCB (data control block) structures are passed to the Frame DMA with
suitable information about frame start/end etc, as well as pointers to DB
(data blocks) buffers.

The Frame DMA engine can use interrupts to signal back when the frames have
been injected or extracted.

There is a limitation on the DB alignment also for injection: Block must
start on 16byte boundaries, and this is why the driver currently copies the
data to into separate buffers.

The Sparx5 switch core needs a IFH (Internal Frame Header) to pass
information from the port to the switch core, and this header is added
before injection and stripped after extraction.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:28:55 +01:00
Steen Hegelund
920c293af8 arm64: dts: sparx5: Add the Sparx5 switch frame DMA support
This adds the interrupt for the Sparx5 Frame DMA.

If this configuration is present the Sparx5 SwitchDev driver will use the
Frame DMA feature, and if not it will use register based injection and
extraction for sending and receiving frames to the CPU.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:28:55 +01:00
Steen Hegelund
10615907e9 net: sparx5: switchdev: adding frame DMA functionality
This add frame DMA functionality to the Sparx5 platform.

Ethernet frames can be extracted or injected autonomously to or from the
device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data
structures in memory are used for injecting or extracting Ethernet frames.
The FDMA generates interrupts when frame extraction or injection is done
and when the linked lists need updating.

The FDMA implements two extraction channels, one per switch core port
towards the VCore CPU system and a total of six injection channels.
Extraction channels are mapped one-to-one to the CPU ports, while injection
channels can be individually assigned to any CPU port.

- FDMA channel 0 through 5 corresponds to CPU port 0 injection direction
  FDMA_CH_CFG[channel].CH_INJ_PORT is set to 0.
- FDMA channel 0 through 5 corresponds to CPU port 1 injection direction when
  FDMA_CH_CFG[channel].CH_INJ_PORT is set to 1.
- FDMA channel 6 corresponds to CPU port 0 extraction direction.
- FDMA channel 7 corresponds to CPU port 1 extraction direction.

The FDMA implements a strict priority scheme among channels. Extraction
channels are prioritized over injection channels and secondarily channels
with higher channel number are prioritized over channels with lower number.
On the other hand, ports are being served on an equal-bandwidth principle
both on injection and extraction directions.  The equal-bandwidth principle
will not force an equal bandwidth. Instead, it ensures that the ports
perform at their best considering the operating conditions.

When more than one injection channel is enabled for injection on the same
CPU port, priority determines which channel can inject data. Ownership
is re-arbitrated on frame boundaries.

The FDMA processes linked lists of DMA Control Block Structures (DCBs). The
DCBs have the same basic structure for both injection and extraction. A DCB
must be placed on a 64-bit word-aligned address in memory. Each DCB has a
per-channel configurable amount of associated data blocks in memory, where
the frame data is stored.

The data blocks that are used by extraction channels must be placed on
64-bit word aligned addresses in memory, and their length must be a
multiple of 128 bytes.

A DCB carries the pointer to the next DCB of the linked list, the INFO word
which holds information for the DCB, and a pair of status word and memory
pointer for every data block that it is associated with.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20 14:28:55 +01:00
Rob Herring
c4fdbf5eba dt-bindings: Output yamllint warnings to stderr
yamllint warnings go to stdout which means on a quiet build no warnings
are output. Fix this and redirect the yamllint output to stderr.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210820000047.1667819-1-robh@kernel.org
2021-08-20 08:05:51 -05:00
Ulrich Spörlein
bab94e9732 HID: sony: Fix more ShanWan clone gamepads to not rumble when plugged in.
The device string on these can differ, apparently, including typos. I've
bought 2 of these in 2012 and googling shows many folks out there with
that broken spelling in their dmesg.

Signed-off-by: Ulrich Spörlein <uqs@FreeBSD.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:58:19 +02:00
Daniel Nguyen
a4bfe13f96 HID: sony: support for the ghlive ps4 dongles
This commit adds support for the Guitar Hero Live PS4 dongles.

These dongles require a "magic" USB control message to be sent
every 8 seconds otherwise the dongle will not report events where
the strumbar is hit while a fret is being held.

Note that the GHL_GUITAR_POKE_INTERVAL is reduced to 8 seconds in order
to support PS3, Wii U, and PS4 GHL dongles.

Also note that the constant for vendor id 0x1430 has been renamed from
Activision to RedOctane as self-declared by the device.

Co-developed-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Daniel Nguyen <daniel.nguyen.1@ens.etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:56:05 +02:00
Lukas Bulwahn
462ba66198 HID: thrustmaster: clean up Makefile and adapt quirks
Commit c49c336378 ("HID: support for initialization of some Thrustmaster
wheels") messed up the Makefile and quirks during the refactoring of this
commit.

Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:

HID_TMINIT
Referencing files: drivers/hid/Makefile, drivers/hid/hid-quirks.c

Following the discussion (see Link), CONFIG_HID_THRUSTMASTER is the
intended config for CONFIG_HID_TMINIT and the file hid-tminit.c was
actually added as hid-thrustmaster.c.

So, clean up Makefile and adapt quirks to that refactoring.

Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Link: https://lore.kernel.org/linux-input/CAKXUXMx6dByO03f3dX0X5zjvQp0j2AhJBg0vQFDmhZUhtKxRxw@mail.gmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:53:54 +02:00
Jim Broadus
786537063b HID: i2c-hid: Fix Elan touchpad regression
A quirk was recently added for Elan devices that has same device match
as an entry earlier in the list. The i2c_hid_lookup_quirk function will
always return the last match in the list, so the new entry shadows the
old entry. The quirk in the previous entry, I2C_HID_QUIRK_BOGUS_IRQ,
silenced a flood of messages which have reappeared in the 5.13 kernel.

This change moves the two quirk flags into the same entry.

Fixes: ca66a6770b (HID: i2c-hid: Skip ELAN power-on command after reset)
Signed-off-by: Jim Broadus <jbroadus@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:51:44 +02:00
Luke D. Jones
87c7ee7ad8 HID: asus: Prevent Claymore sending suspend event
Prevent the ASUS Claymore keyboard from sending a suspend event
when the device sleeps itself. The suspend event causes a system
suspend if uncaught.

Signed off by: Luke D Jones <luke@ljones.dev>

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:50:41 +02:00
Basavaraj Natikar
e665775591 HID: amd_sfh: Add dyndbg prints for debugging
Add dynamic debug for debugging sensors states during
initialization, stop, suspend and resume.

Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:48:49 +02:00
Basavaraj Natikar
0873d1afac HID: amd_sfh: Add support for PM suspend and resume
Add support for power management routines.

Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:48:49 +02:00
Basavaraj Natikar
ac15e9196f HID: amd_sfh: Move hid probe after sensor is enabled
Earlier platforms don’t have sensor status checking mechanism.
Sensors are always enabled without checking sensor status.
Hence invoke hid probe only after the sensor is enabled by
checking sensor status.

Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:48:49 +02:00
Basavaraj Natikar
173709f50e HID: amd_sfh: Add command response to check command status
Sometimes sensor enable/disable may take time, without checking the
actual status bits from MP2 FW can lead the amd-sfh to misbehave.

Hence add a status check of enable/disable command
by waiting on the command response before sending the next
command to FW.

Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20 14:48:48 +02:00