skb_pp_recycle() is only used by skb_free_head() in
skbuff.c, so move it to skbuff.c.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The parameter 'msg' has never been used by __sock_cmsg_send, so we can remove it
safely.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ffa84b5ffb ("net: add netns refcount tracker to struct sock")
added a tracker to sockets, but did not track kernel sockets.
We still have syzbot reports hinting about netns being destroyed
while some kernel TCP sockets had not been dismantled.
This patch tracks kernel sockets, and adds a ref_tracker_dir_print()
call to net_free() right before the netns is freed.
Normally, each layer is responsible for properly releasing its
kernel sockets before last call to net_free().
This debugging facility is enabled with CONFIG_NET_NS_REFCNT_TRACKER=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the receiver process and the BH runs on different cores,
udp_rmem_release() experience a cache miss while accessing sk_rcvbuf,
as the latter shares the same cacheline with sk_forward_alloc, written
by the BH.
With this patch, UDP tracks the rcvbuf value and its update via custom
SOL_SOCKET socket options, and copies the forward memory threshold value
used by udp_rmem_release() in a different cacheline, already accessed by
the above function and uncontended.
Since the UDP socket init operation grown a bit, factor out the common
code between v4 and v6 in a shared helper.
Overall the above give a 10% peek throughput increase under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon introduce custom setsockopt for UDP sockets, too.
Instead of doing even more complex arbitrary checks inside
sock_use_custom_sol_socket(), add a new socket flag and set it
for the relevant socket types (currently only MPTCP).
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for 800Gbps speed, link modes of 100Gbps per lane.
As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df
copper and optical PMDs baselines using 100G/lane will be supported.
Add the relevant PMDs which are mentioned in slide 5 in IEEE
documentation [1] and were approved on 10-2022 [2]:
BP - KR8
Cu Cable - CR8
MMF 50m - VR8
MMF 100m - SR8
SMF 500m - DR8
SMF 2km - DR8-2
[1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf
[2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock().
Let's rename inet6_destroy_sock() to inet6_cleanup_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'&asoc->ulpq' passed to sctp_ulpq_init() as the first argument,
then sctp_qlpq_init() initializes it and eventually returns the
address of the struct member back. Therefore, in this case, the
return pointer cannot be NULL.
Moreover, it seems sctp_ulpq_init() has always been used only in
sctp_association_init(), so there's really no need to return ulpq
anymore.
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221019180735.161388-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address a bunch of kdoc warnings:
include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'
Link: https://lore.kernel.org/r/20221018231310.1040482-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Include an 80-byte buffer in struct netlink_ext_ack that can be used
for scnprintf()ed messages. This does mean that the resulting string
can't be enumerated, translated etc. in the way NL_SET_ERR_MSG() was
designed to allow.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a helper that restricts the link modes according to the
phylink capabilities.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[rebased on net-next/master and added documentation]
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY08JQQAKCRDbK58LschI
g0M0AQCWGrJcnQFut1qwR9efZUadwxtKGAgpaA/8Smd8+v7c8AD/SeHQuGfkFiD6
rx18hv1mTfG0HuPnFQy6YZQ98vmznwE=
=DaeS
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-18
We've added 33 non-merge commits during the last 14 day(s) which contain
a total of 31 files changed, 874 insertions(+), 538 deletions(-).
The main changes are:
1) Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs,
from Hou Tao & Paul E. McKenney.
2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values. In the wild we have seen OS vendors doing buggy backports
where helper call numbers mismatched. This is an attempt to make
backports more foolproof, from Andrii Nakryiko.
3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions,
from Roberto Sassu.
4) Fix libbpf's BTF dumper for structs with padding-only fields,
from Eduard Zingerman.
5) Fix various libbpf bugs which have been found from fuzzing with
malformed BPF object files, from Shung-Hsi Yu.
6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT,
from Jie Meng.
7) Fix various ASAN bugs in both libbpf and selftests when running
the BPF selftest suite on arm64, from Xu Kuohai.
8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest
and use in-skeleton link pointer to remove an explicit bpf_link__destroy(),
from Jiri Olsa.
9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying
on symlinked iptables which got upgraded to iptables-nft,
from Martin KaFai Lau.
10) Minor BPF selftest improvements all over the place, from various others.
* tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits)
bpf/docs: Update README for most recent vmtest.sh
bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
bpf: Use rcu_trace_implies_rcu_gp() in local storage map
bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
rcu-tasks: Provide rcu_trace_implies_rcu_gp()
selftests/bpf: Use sys_pidfd_open() helper when possible
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
libbpf: Deal with section with no data gracefully
libbpf: Use elf_getshdrnum() instead of e_shnum
selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c
selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow
selftest/bpf: Fix memory leak in kprobe_multi_test
selftests/bpf: Fix memory leak caused by not destroying skeleton
libbpf: Fix memory leak in parse_usdt_arg()
libbpf: Fix use-after-free in btf_dump_name_dups
selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test
selftests/bpf: Alphabetize DENYLISTs
selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id()
libbpf: Introduce bpf_link_get_fd_by_id_opts()
libbpf: Introduce bpf_btf_get_fd_by_id_opts()
...
====================
Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As an accident of implementation, an RCU Tasks Trace grace period also
acts as an RCU grace period. However, this could change at any time.
This commit therefore creates an rcu_trace_implies_rcu_gp() that currently
returns true to codify this accident. Code relying on this accident
must call this function to verify that this accident is still happening.
Reported-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/r/20221014113946.965131-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.
However, the current way to set has_conns is illegal and possible to
trigger that problem. reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater. Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.
For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection. To avoid the race, let's split
the reader and updater with proper locking.
cpu1 cpu2
+----+ +----+
__ip[46]_datagram_connect() reuseport_grow()
. .
|- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size)
| . |
| |- rcu_read_lock()
| |- reuse = rcu_dereference(sk->sk_reuseport_cb)
| |
| | | /* reuse->has_conns == 0 here */
| | |- more_reuse->has_conns = reuse->has_conns
| |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */
| | |
| | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
| | | more_reuse)
| `- rcu_read_unlock() `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED
Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review. [0]
For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.
1) shutdown() TCP listener, which is moved into the latter part of
reuse->socks[] to migrate reqsk.
2) New listen() overflows reuse->socks[] and call reuseport_grow().
3) reuse->max_socks overflows u16 with the new listener.
4) reuseport_grow() pops the old shutdown()ed listener from the array
and update its sk->sk_reuseport_cb as NULL without lock_sock().
shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().
[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Fix a recent regression where a sleeping kernfs function is called with
css_set_lock (spinlock) held.
* Revert the commit to enable cgroup1 support for cgroup_get_from_fd/file().
Multiple users assume that the lookup only works for cgroup2 and breaks
when fed a cgroup1 file. Instead, introduce a separate set of functions to
lookup both v1 and v2 and use them where the user explicitly wants to
support both versions.
* Compat update for tools/perf/util/bpf_skel/bperf_cgroup.bpf.c.
* Add Josef Bacik as a blkcg maintainer.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY03MlA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGTkUAQD7fNcSPuc2m/BvW+gySKQkp9PZMA6E6yOIqirc
QKmIgwEAwWECW7RR1alhOGD50RtYkuYVsLD1+6Ka4eMHe+EhwA4=
=kGLI
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a recent regression where a sleeping kernfs function is called
with css_set_lock (spinlock) held
- Revert the commit to enable cgroup1 support for cgroup_get_from_fd/file()
Multiple users assume that the lookup only works for cgroup2 and
breaks when fed a cgroup1 file. Instead, introduce a separate set of
functions to lookup both v1 and v2 and use them where the user
explicitly wants to support both versions.
- Compat update for tools/perf/util/bpf_skel/bperf_cgroup.bpf.c.
- Add Josef Bacik as a blkcg maintainer.
* tag 'cgroup-for-6.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
blkcg: Update MAINTAINERS entry
mm: cgroup: fix comments for get from fd/file helpers
perf stat: Support old kernels for bperf cgroup counting
bpf: cgroup_iter: support cgroup1 using cgroup fd
cgroup: add cgroup_v1v2_get_from_[fd/file]()
Revert "cgroup: enable cgroup_get_from_file() on cgroup1"
cgroup: Reorganize css_set_lock and kernfs path processing
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top to
make sure it doesn't break so easily again. The majority of the series
fixes up how the clk_set_rate_*() APIs work, particularly around when
the rate constraints are dropped and how they move around when
reparenting clks. Overall it's a much needed improvement to the clk rate
range APIs that used to be pretty broken if you looked sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that the
system actually boots on the affected devices.
-----BEGIN PGP SIGNATURE-----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=ZG8Y
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
This reverts commit 78e5a33994 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a33994 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmNLD/EACgkQ4CHKc/GJ
qRCnhQf+Oj0qB9bdy+MmgirN0/VHFmTQbNSYUd/gzGmfcAHpxIE9KG0V9+y9I2wG
Nh6WgUKwX1IEKQ37X+VT/XsIe9VcALcn5LjxD/J4cL71CREa/0HGQbBavt9GuDsC
zkUwxYx6iAtGfK/PK9jE2eHIzxzfZ6kEkFsMaS+jP/8iLnE9trAhQ1o6vG15EFPA
MHjJ3+y7AsUE7SYHKL+8WLA+QR443SlHN0u327KkA2kKpjsj+hqQdiPfHqOArBbo
vw2DI14tcELGtruo5zHMVT9TcXWV7hcJ6yTTnaKxI+WCbgsEpPQKevTmc7q9P0H4
hLgQEElRuzBrXUCIBPVboNuTgGNjLQ==
=cVwd
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
After commit d6a71648db ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6a71648db ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The recent commit
'commit 744d23c71a ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state")'
requires the MAC driver explicitly tell the phy driver who is
managing the PM, otherwise you will see warning during resume
stage.
Add a boolean property in the phylink_config structure so that
the MAC driver can use it to tell the PHY driver if it wants to
manage the PM.
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 854701ba4c.
We have more violations around, which leads to:
WARNING: CPU: 2 PID: 1 at include/linux/cpumask.h:110 __netif_set_xps_queue+0x14e/0x770
Let's back this out and retry with a larger clean up in -next.
Fixes: 854701ba4c ("net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}")
Link: https://lore.kernel.org/all/20221014030459.3272206-2-guoren@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments
-----BEGIN PGP SIGNATURE-----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=UVHq
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
These are three fixes for build warnings that came in during the
merge window.
-----BEGIN PGP SIGNATURE-----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=HTmF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
There is an issue when build with older versions of binutils 2.27.0,
arch/arm/mach-at91/pm_suspend.S: Assembler messages:
arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'
Use UL() macro to fix the issue in assembly file.
Fixes: 4fd36e4583 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20221012030635.13140-1-wangkefeng.wang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Here are a few remaining patches for 6.1-rc1. The major changes
are the hibernation fixes for HD-audio CS35L41 codec and the
USB-audio small fixes against the last change. In addition, a
couple of HD-audio regression fixes and a couple of potential
mutex-deadlock fixes with OSS emulation in ALSA core side are seen.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmNJgcIOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+WBxAAlwaJnvzqz2dxVqICM6MNlGiCssdNS2fW2lcm
r2zEMiUt++tn2zem12MqROm+Zn9uwlV+fY8smjUlxNY7Wj07wCQWwH5LXfn9v82D
+mRL4KOhYKGDQMDvo380WGrkuUjCMJkXtVMJDWR1HSMFRZmWu0YdCE0dFd90Hrus
HW+/+fyP4CNhpk0m5jrffqB7FQI6ylB3j4qmhbxwP9AlA3ik2QvslA+fK6cVltay
A+hljqNRa1M3/730UvDTNN6PykYBunuvT/EzUFdY/Y0lNtz5RgAAVDBQEZ3T6URE
6AMgYyCv+gyRH5bcO2Arp3X0JY9ZQKp3/gbTrKfY0G2JQlKVALW1vjExUTlQaWBi
5Q8/rWo+ZsRsis8NOrJJ9fdHyc6rFXRKX9t/U8svjIW/JxW/4ge2UWxKnISzcQZ6
1ktFGpoImi8+fXMspKxiePVgJSPxdk5GjRHjdQJ0LYQeceEipljFIXswLPk84KmM
QPBFMBDxCm3C4E7ZRfk2Rnt0ypf3eRlfQmuWDRtvYsjpgpx08ZKElBhgNMejPtcX
usXugOMYDB6LK+qlNQhE4iS9V+Xh/6XQL2lblPosPyRY1Ui367s6FHuAty4Yjxcg
QkggiMuLWSypVIJVUG/uUcgZYHSZbnWPXvfPmt0PM2EbYKLr3zmdkLgKDUfdRvD5
Hy5HNdU=
=6PA4
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a few remaining patches for 6.1-rc1.
The major changes are the hibernation fixes for HD-audio CS35L41 codec
and the USB-audio small fixes against the last change. In addition, a
couple of HD-audio regression fixes and a couple of potential
mutex-deadlock fixes with OSS emulation in ALSA core side are seen"
* tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l41: Support System Suspend
ALSA: hda: cs35l41: Remove suspend/resume hda hooks
ALSA: hda/cs_dsp_ctl: Fix mutex inversion when creating controls
ALSA: hda: hda_cs_dsp_ctl: Ensure pwr_lock is held before reading/writing controls
ALSA: hda: hda_cs_dsp_ctl: Minor clean and redundant code removal
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
ALSA: usb-audio: Avoid superfluous endpoint setup
ALSA: usb-audio: Correct the return code from snd_usb_endpoint_set_params()
ALSA: usb-audio: Apply mutex around snd_usb_endpoint_set_params()
ALSA: usb-audio: Avoid unnecessary interface change at EP close
ALSA: hda: Update register polling macros
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
- Various performance optimizations, resulting in a 4%-9% speedup
in the mmtests/config-scheduler-perfpipe micro-benchmark.
- New interface to turn PSI on/off on a per cgroup level.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=91tB
-----END PGP SIGNATURE-----
Merge tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull PSI updates from Ingo Molnar:
- Various performance optimizations, resulting in a 4%-9% speedup in
the mmtests/config-scheduler-perfpipe micro-benchmark.
- New interface to turn PSI on/off on a per cgroup level.
* tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: Per-cgroup PSI accounting disable/re-enable interface
sched/psi: Cache parent psi_group to speed up group iteration
sched/psi: Consolidate cgroup_psi()
sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure
sched/psi: Remove NR_ONCPU task accounting
sched/psi: Optimize task switch inside shared cgroups again
sched/psi: Move private helpers to sched/stats.h
sched/psi: Save percpu memory when !psi_cgroups_enabled
sched/psi: Don't create cgroup PSI files when psi_disabled
sched/psi: Fix periodic aggregation shut off
refcounting errors in ZONE_DEVICE pages.
- Peter Xu fixes some userfaultfd test harness instability.
- Various other patches in MM, mainly fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0j6igAKCRDdBJ7gKXxA
jnGxAP99bV39ZtOsoY4OHdZlWU16BUjKuf/cb3bZlC2G849vEwD+OKlij86SG20j
MGJQ6TfULJ8f1dnQDd6wvDfl3FMl7Qc=
=tbdp
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
* A handful of DT updates for the PolarFire SOC.
* A fix to correct the handling of write-only mappings.
* m{vetndor,arcd,imp}id is now in /proc/cpuinfo
* The SiFive L2 cache controller support has been refactored to also
support L3 caches.
There's also a handful of fixes, cleanups and improvements throughout
the tree.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmNJiegTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiaW+D/9nN7JMKD4KbED8MUgRVcs+TS4MQk5J
QkjmAXme7w2H1+T5mxNWHk0QvEC6qMu2JQWHeott0ROYPkbXoNtuOOkzcsZhVaeb
rjWH/WC5QhEeMPDc1qc0AmxVkOa937f2NkGtoEvhW6SMWvStHpefdOHo/ij106Re
7wxkcj0fjgn/zPmDltRbWSMyFZWJec5DvZ3AB4NYHnc2ycr8Z7HAG08rjZkdkIjQ
zYGsCkUtrk4qShikKK3cSelW6hH1/FdM+bAo0rzt1frmTw1FLaFOsZZjOaVYekzi
l0jxsb8FRBWyKBFqcagukjZwFy6D+7Q+masb0cXY03eZpEVrroA4bHiPkuZ22Ms/
7ol/I5FvTyrj2R4zd70ziYVF3usO78t5HC4AIQmFl25TNcQdYQd8X28yh12iG6QN
Pa0lh/EOr5idaT2+TErhzRepICnK1Nj9y0H5TZxYljLAhH9j0d/8+Iw88vzJnPga
vek7unZ3BzkooLVIpfpkT8vC94MA0hoP849MVFQDtZgZhPMbjIkN91HrDiw9ktV2
SK9cuPndfrs5nW1WKu8F0cDziusbMHv4F51TPVRu/dFcIkspv+aLojAThgvcm42K
55LgvDgLjo7P3PUghiDXUoPZXvL19t5Bnq2/E47rlSTvvGssIu/onZO6BkxybAm6
BkHuchr8TGBWMg==
=iCOr
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- DT updates for the PolarFire SOC
- a fix to correct the handling of write-only mappings
- m{vetndor,arcd,imp}id is now in /proc/cpuinfo
- the SiFive L2 cache controller support has been refactored to also
support L3 caches
- misc fixes, cleanups and improvements throughout the tree
* tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
MAINTAINERS: add RISC-V's patchwork
RISC-V: Make port I/O string accessors actually work
riscv: enable software resend of irqs
RISC-V: Re-enable counter access from userspace
riscv: vdso: fix NULL deference in vdso_join_timens() when vfork
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
riscv: Pass -mno-relax only on lld < 15.0.0
RISC-V: Avoid dereferening NULL regs in die()
dt-bindings: riscv: add new riscv,isa strings for emulators
...
The switch sends autocast mib in little-endian. This is problematic for
big-endian system as the values needs to be converted.
Fix this by converting each mib value to cpu byte order.
Fixes: 5c957c7ca7 ("net: dsa: qca8k: add support for mib autocast in Ethernet packet")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The header and the data of the skb for the inband mgmt requires
to be in little-endian. This is problematic for big-endian system
as the mgmt header is written in the cpu byte order.
Fix this by converting each value for the mgmt header and data to
little-endian, and convert to cpu byte order the mgmt header and
data sent by the switch.
Fixes: 5950c7c0a6 ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=kxra
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Fixes that ended up landing later than the initial block pull request.
Nothing really major in here:
- NVMe pull request via Christoph:
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- add NVME_QUIRK_NO_DEEPEST_PS to avoid the deepest sleep state
on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi
Grimberg)
- Proactively avoid a sign extension issue with the queue flags
(Brian)
- Regression fix for hidden disks (Christoph)
- Update OPAL maintainers entry (Jonathan)
- blk-wbt regression initialization fix (Yu)"
* tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux:
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
nvme-tcp: fix possible hang caused during ctrl deletion
nvme-rdma: fix possible hang caused during ctrl deletion
block: fix leaking minors of hidden disks
block: avoid sign extend problem with default queue flags mask
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
block: Remove the repeat word 'can'
MAINTAINERS: Update SED-Opal Maintainers
-----BEGIN PGP SIGNATURE-----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=0dSL
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"A collection of fixes that ended up either being later than the
initial pull, or dependent on multiple branches (6.0-late being one of
them) and hence deferred purposely. This contains:
- Cleanup fixes for the single submitter late 6.0 change, which we
pushed to 6.1 to keep the 6.0 changes small (Dylan, Pavel)
- Fix for IORING_OP_CONNECT not handling -EINPROGRESS correctly (me)
- Ensure that the zc sendmsg variant gets audited correctly (me)
- Regression fix from this merge window where kiocb_end_write()
doesn't always gets called, which can cause issues with fs freezing
(me)
- Registered files SCM handling fix (Pavel)
- Regression fix for big sqe dumping in fdinfo (Pavel)
- Registered buffers accounting fix (Pavel)
- Remove leftover notification structures, we killed them off late in
6.0 (Pavel)
- Minor optimizations (Pavel)
- Cosmetic variable shadowing fix (Stefan)"
* tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux:
io_uring/rw: ensure kiocb_end_write() is always called
io_uring: fix fdinfo sqe offsets calculation
io_uring: local variable rw shadows outer variable in io_write
io_uring/opdef: remove 'audit_skip' from SENDMSG_ZC
io_uring: optimise locking for local tw with submit_wait
io_uring: remove redundant memory barrier in io_req_local_work_add
io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT
io_uring: remove notif leftovers
io_uring: correct pinned_vm accounting
io_uring/af_unix: defer registered files gc to io_uring release
io_uring: limit registration w/ SINGLE_ISSUER
io_uring: remove io_register_submitter
io_uring: simplify __io_uring_add_tctx_node
Zong Li <zong.li@sifive.com> says:
Since composable cache may be L3 cache if private L2 cache exists, we
should use its original name "composable cache" to prevent confusion.
This patchset contains the modification which is related to ccache, such
as DT binding and EDAC driver.
* b4-shazam-merge:
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
Link: https://lore.kernel.org/r/20220913061817.22564-1-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since composable cache may be L3 cache if there is a L2 cache, we should
use its original name composable cache to prevent confusion.
There are some new lines were generated due to adding the compatible
"sifive,ccache0" into ID table and indent requirement.
The sifive L2 has been renamed to sifive CCACHE, EDAC driver needs to
apply the change as well.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Co-developed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-3-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Current release - regressions:
- Revert "net/sched: taprio: make qdisc_leaf() see
the per-netdev-queue pfifo child qdiscs", it may cause crashes
when the qdisc is reconfigured
- inet: ping: fix splat due to packet allocation refactoring in inet
- tcp: clean up kernel listener's reqsk in inet_twsk_purge(),
fix UAF due to races when per-netns hash table is used
Current release - new code bugs:
- eth: adin1110: check in netdev_event that netdev belongs to driver
- fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.
Previous releases - regressions:
- ipv4: handle attempt to delete multipath route when fib_info
contains an nh reference, avoid oob access
- wifi: fix handful of bugs in the new Multi-BSSID code
- wifi: mt76: fix rate reporting / throughput regression on mt7915
and newer, fix checksum offload
- wifi: iwlwifi: mvm: fix double list_add at
iwl_mvm_mac_wake_tx_queue (other cases)
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AyqG
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and wifi.
Current release - regressions:
- Revert "net/sched: taprio: make qdisc_leaf() see the
per-netdev-queue pfifo child qdiscs", it may cause crashes when the
qdisc is reconfigured
- inet: ping: fix splat due to packet allocation refactoring in inet
- tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
due to races when per-netns hash table is used
Current release - new code bugs:
- eth: adin1110: check in netdev_event that netdev belongs to driver
- fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.
Previous releases - regressions:
- ipv4: handle attempt to delete multipath route when fib_info
contains an nh reference, avoid oob access
- wifi: fix handful of bugs in the new Multi-BSSID code
- wifi: mt76: fix rate reporting / throughput regression on mt7915
and newer, fix checksum offload
- wifi: iwlwifi: mvm: fix double list_add at
iwl_mvm_mac_wake_tx_queue (other cases)
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed"
* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
sunhme: fix an IS_ERR() vs NULL check in probe
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
kcm: avoid potential race in kcm_tx_work
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
net: phy: micrel: Fixes FIELD_GET assertion
openvswitch: add nf_ct_is_confirmed check before assigning the helper
tcp: Fix data races around icsk->icsk_af_ops.
ipv6: Fix data races around sk->sk_prot.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
tcp/udp: Fix memory leak in ipv6_renew_options().
mctp: prevent double key removal and unref
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
netfilter: rpfilter/fib: Populate flowic_l3mdev field
selftests: netfilter: Test reverse path filtering
net/mlx5: Make ASO poll CQ usable in atomic context
tcp: cdg: allow tcp_cdg_release() to be called multiple times
inet: ping: fix recent breakage
ipv6: ping: fix wrong checksum for large frames
net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
...
noteworthy one being some additional wakeups in cap handling code, and
a messenger cleanup.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmNINMwTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi5UeB/0ZzxdhZarepRYdOw4K+hHmCWYjlrEi
Aw91gfS9DmzXfLyV42/6kxhKGEmVH4Wpz/mAIfMcLaLJZxI9GspVZZuofK6XPJUY
eGqllxXgbgvCqnX9puCfw4RTrEJkt/y6e0/6EhAhjArDNyEylHcApONbEsvHLB+L
IjYEJRuDDNqBnacMjn0iqI2F3zpyu6DkuJNWLxfbGhnWWsj8LaxXVgLtBeePuoIN
udVZiNxiJAldDGc99r0xX5gicjyihBRiomjnz6FO6F459CtrPE/qdx6TNUUt63N3
Lt55JDCM8qJeA8ffblZrhNnT2iefcEuqRcSwSdLbQxW/l6y23O4drx+N
=l/PT
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A quiet round this time: several assorted filesystem fixes, the most
noteworthy one being some additional wakeups in cap handling code, and
a messenger cleanup"
* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
ceph: remove Sage's git tree from documentation
ceph: fix incorrectly showing the .snap size for stat
ceph: fail the open_by_handle_at() if the dentry is being unlinked
ceph: increment i_version when doing a setattr with caps
ceph: Use kcalloc for allocating multiple elements
ceph: no need to wait for transition RDCACHE|RD -> RD
ceph: fail the request if the peer MDS doesn't support getvxattr op
ceph: wake up the waiters if any new caps comes
libceph: drop last_piece flag from ceph_msg_data_cursor
- New Features:
- Add NFSv4.2 xattr tracepoints
- Replace xprtiod WQ in rpcrdma
- Flexfiles cancels I/O on layout recall or revoke
- Bugfixes and Cleanups:
- Directly use ida_alloc() / ida_free()
- Don't open-code max_t()
- Prefer using strscpy over strlcpy
- Remove unused forward declarations
- Always return layout states on flexfiles layout return
- Have LISTXATTR treat NFS4ERR_NOXATTR as an empty reply instead of error
- Allow more xprtrdma memory allocations to fail without triggering a reclaim
- Various other xprtrdma clean ups
- Fix rpc_killall_tasks() races
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmNHJToACgkQ18tUv7Cl
QOtTbA//QiresBzf7cnZOAwiZbe9LXiWfR2p5IkBLJPYJ8xtTliRLwnwYgQib9OI
+4DzBiEqujah9BDac5OeatYW1UDLQ9lMIoCyvPjSw8Yxa8JEHDb/1ODDUOMS+ZIo
dk1AKV2Wi2stxn85Sy+VGriE3JKiaeJxAlsWgiT/BLP0hAyZw1L3Tg017EgxVIVz
8cfPBciu/Bc2/pZp9f5+GBjAlcUX0u/JFKiLPDHDZkvFTr4RgREZOyStDWncgsxK
iHAIfSr6TxlynHabNAnFNVuYq7gkBe3jg1TkABdQ+SilAgdLpugAW8MFdig0AZQO
UIsVJHjRHLpz6cJurnDcu9tGB6jLVTZfyz8PZQl5H9CqnbSHUxdOCTuve7fGhVas
+wSXq1U98gStzoqtw5pMwsB2YSSOsUR8QEZpLEkvQgzHwoszNa7FrELqaZUJyJHR
qmRH2nKCzsSBbQn5AhnzHBxzeOv6r0r3YjvKd5utwsRtq3g9GX14KAOmqvDTKk2q
9KmrGlDVtVmOww2QnPTXH6mSthHLuqcKg1H2H7Xymmskq9n8PC6M+EiQd8XsKNJa
MfBkOVFdxrJq6Htpx4IMLJP6jvYVKEbef2eRFt8hNnla8pMPlsDqoIysJulaWpiB
HqdoPHR9Y26Qxuw7G91ba5Q5qqu9+ZOLB9jeSRjcXtsUDxq9f/A=
=p47k
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add NFSv4.2 xattr tracepoints
- Replace xprtiod WQ in rpcrdma
- Flexfiles cancels I/O on layout recall or revoke
Bugfixes and Cleanups:
- Directly use ida_alloc() / ida_free()
- Don't open-code max_t()
- Prefer using strscpy over strlcpy
- Remove unused forward declarations
- Always return layout states on flexfiles layout return
- Have LISTXATTR treat NFS4ERR_NOXATTR as an empty reply instead of
error
- Allow more xprtrdma memory allocations to fail without triggering a
reclaim
- Various other xprtrdma clean ups
- Fix rpc_killall_tasks() races"
* tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked
SUNRPC: Add API to force the client to disconnect
SUNRPC: Add a helper to allow pNFS drivers to selectively cancel RPC calls
SUNRPC: Fix races with rpc_killall_tasks()
xprtrdma: Fix uninitialized variable
xprtrdma: Prevent memory allocations from driving a reclaim
xprtrdma: Memory allocation should be allowed to fail during connect
xprtrdma: MR-related memory allocation should be allowed to fail
xprtrdma: Clean up synopsis of rpcrdma_regbuf_alloc()
xprtrdma: Clean up synopsis of rpcrdma_req_create()
svcrdma: Clean up RPCRDMA_DEF_GFP
SUNRPC: Replace the use of the xprtiod WQ in rpcrdma
NFSv4.2: Add a tracepoint for listxattr
NFSv4.2: Add tracepoints for getxattr, setxattr, and removexattr
NFSv4.2: Move TRACE_DEFINE_ENUM(NFS4_CONTENT_*) under CONFIG_NFS_V4_2
NFSv4.2: Add special handling for LISTXATTR receiving NFS4ERR_NOXATTR
nfs: remove nfs_wait_atomic_killable() and nfs_write_prepare() declaration
NFSv4: remove nfs4_renewd_prepare_shutdown() declaration
fs/nfs/pnfs_nfs.c: fix spelling typo and syntax error in comment
NFSv4/pNFS: Always return layout stats on layout return for flexfiles
...
Device drivers can use the migrate_vma family of functions to migrate
existing private anonymous mappings to device private pages. These pages
are backed by memory on the device with drivers being responsible for
copying data to and from device memory.
Device private pages are freed via the pgmap->page_free() callback when
they are unmapped and their refcount drops to zero. Alternatively they
may be freed indirectly via migration back to CPU memory in response to a
pgmap->migrate_to_ram() callback called whenever the CPU accesses an
address mapped to a device private page.
In other words drivers cannot control the lifetime of data allocated on
the devices and must wait until these pages are freed from userspace.
This causes issues when memory needs to reclaimed on the device, either
because the device is going away due to a ->release() callback or because
another user needs to use the memory.
Drivers could use the existing migrate_vma functions to migrate data off
the device. However this would require them to track the mappings of each
page which is both complicated and not always possible. Instead drivers
need to be able to migrate device pages directly so they can free up
device memory.
To allow that this patch introduces the migrate_device family of functions
which are functionally similar to migrate_vma but which skips the initial
lookup based on mapping.
Link: https://lkml.kernel.org/r/868116aab70b0c8ee467d62498bb2cf0ef907295.1664366292.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since 27674ef6c7 ("mm: remove the extra ZONE_DEVICE struct page
refcount") device private pages have no longer had an extra reference
count when the page is in use. However before handing them back to the
owning device driver we add an extra reference count such that free pages
have a reference count of one.
This makes it difficult to tell if a page is free or not because both free
and in use pages will have a non-zero refcount. Instead we should return
pages to the drivers page allocator with a zero reference count. Kernel
code can then safely use kernel functions such as get_page_unless_zero().
Link: https://lkml.kernel.org/r/cf70cf6f8c0bdb8aaebdbfb0d790aea4c683c3c6.1664366292.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix several device private page reference counting issues",
v2
This series aims to fix a number of page reference counting issues in
drivers dealing with device private ZONE_DEVICE pages. These result in
use-after-free type bugs, either from accessing a struct page which no
longer exists because it has been removed or accessing fields within the
struct page which are no longer valid because the page has been freed.
During normal usage it is unlikely these will cause any problems. However
without these fixes it is possible to crash the kernel from userspace.
These crashes can be triggered either by unloading the kernel module or
unbinding the device from the driver prior to a userspace task exiting.
In modules such as Nouveau it is also possible to trigger some of these
issues by explicitly closing the device file-descriptor prior to the task
exiting and then accessing device private memory.
This involves some minor changes to both PowerPC and AMD GPU code.
Unfortunately I lack hardware to test either of those so any help there
would be appreciated. The changes mimic what is done in for both Nouveau
and hmm-tests though so I doubt they will cause problems.
This patch (of 8):
When the CPU tries to access a device private page the migrate_to_ram()
callback associated with the pgmap for the page is called. However no
reference is taken on the faulting page. Therefore a concurrent migration
of the device private page can free the page and possibly the underlying
pgmap. This results in a race which can crash the kernel due to the
migrate_to_ram() function pointer becoming invalid. It also means drivers
can't reliably read the zone_device_data field because the page may have
been freed with memunmap_pages().
Close the race by getting a reference on the page while holding the ptl to
ensure it has not been freed. Unfortunately the elevated reference count
will cause the migration required to handle the fault to fail. To avoid
this failure pass the faulting page into the migrate_vma functions so that
if an elevated reference count is found it can be checked to see if it's
expected or not.
[mpe@ellerman.id.au: fix build]
Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au
Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com
Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename sz_damon_region() to damon_sz_region(), and move it to
"include/linux/damon.h", because in many places, we can to use this func.
Link: https://lkml.kernel.org/r/20220927001946.85375-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM. However, commit 03485f2adc ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:
setsockopt(IPV6_ADDRFORM) sendmsg()
+-----------------------+ +-------+
- do_ipv6_setsockopt(sk, ...) - udpv6_sendmsg(sk, ...)
- sockopt_lock_sock(sk) ^._ called via udpv6_prot
- lock_sock(sk) before WRITE_ONCE()
- WRITE_ONCE(sk->sk_prot, &tcp_prot)
- inet6_destroy_sock() - if (!corkreq)
- sockopt_release_sock(sk) - ip6_make_skb(sk, ...)
- release_sock(sk) ^._ lockless fast path for
the non-corking case
- __ip6_append_data(sk, ...)
- ipv6_local_rxpmtu(sk, ...)
- xchg(&np->rxpmtu, skb)
^._ rxpmtu is never freed.
- goto out_no_dst;
- lock_sock(sk)
For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e27326009a ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there. Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.
We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport. So they can be posted as a follow-up later for net-next.
Fixes: 03485f2adc ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4b340ae20d ("IPv6: Complete IPV6_DONTFRAG support") forgot
to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6
socket into IPv4 with IPV6_ADDRFORM. After conversion, sk_prot is
changed to udp_prot and ->destroy() never cleans it up, resulting in
a memory leak.
This is due to the discrepancy between inet6_destroy_sock() and
IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM
to remove the difference.
However, this is not enough for now because rxpmtu can be changed
without lock_sock() after commit 03485f2adc ("udpv6: Add lockless
sendmsg() support"). We will fix this case in the following patch.
Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and
remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy()
in the future.
Fixes: 4b340ae20d ("IPv6: Complete IPV6_DONTFRAG support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
