Commit graph

36,364 commits

Author SHA1 Message Date
Benjamin Herrenschmidt
492b057c42 Merge commit 'origin/master' into next 2009-06-17 10:24:53 +10:00
Linus Torvalds
98523d4630 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (30 commits)
  sparc64: Update defconfig.
  sparc: Wire up sys_rt_tgsigqueueinfo().
  openprom: Squelch useless GCC warning.
  sparc: replace uses of CPU_MASK_ALL_PTR
  sparc64: Add proper dynamic ftrace support.
  sparc: Simplify code using is_power_of_2() routine.
  sparc: move of_device common code to of_device_common
  sparc: remove dma-mapping_{32|64}.h
  sparc: use dma_map_page instead of dma_map_single
  sparc: add sync_single_for_device and sync_sg_for_device to struct dma_ops
  sparc: move the duplication in dma-mapping_{32|64}.h to dma-mapping.h
  p9100: use standard fields for framebuffer physical address and length
  leo: use standard fields for framebuffer physical address and length
  cg6: use standard fields for framebuffer physical address and length
  cg3: use standard fields for framebuffer physical address and length
  cg14: use standard fields for framebuffer physical address and length
  bw2: use standard fields for framebuffer physical address and length
  sparc64: fix and optimize irq distribution
  sparc64: Use new dynamic per-cpu allocator.
  sparc64: Only allocate per-cpu areas for possible cpus.
  ...
2009-06-16 11:52:41 -07:00
Linus Torvalds
8d6cea5111 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits)
  Blackfin: hook up new rt_tgsigqueueinfo syscall
  Blackfin: improve CLKIN_HZ config default
  Blackfin: initial support for ftrace grapher
  Blackfin: initial support for ftrace
  Blackfin: enable support for LOCKDEP
  Blackfin: add preliminary support for STACKTRACE
  Blackfin: move custom sections into sections.h
  Blackfin: punt unused/wrong mutex-dec.h
  Blackfin: add support for irqflags
  Blackfin: add support for bzip2/lzma compressed kernel images
  Blackfin: convert Kconfig style to def_bool
  Blackfin: bf548-ezkit: update smsc911x resources
  Blackfin: update aedos-ipipe code to upstream 1.10-00
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf518f-ezbrd: fix SPI CS for SPI flash
  Blackfin: define SPI IRQ in board resources
  Blackfin: do not configure the UART early if on wrong processor
  Blackfin: fix deadlock in SMP IPI handler
  Blackfin: fix flag storage for irq funcs
  Blackfin: push down exception oops checking
  ...
2009-06-16 11:49:58 -07:00
Linus Torvalds
6a454f71d7 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (33 commits)
  [S390] s390: hibernation support for s390
  [S390] pm: dcssblk power management callbacks.
  [S390] pm: monreader power management callbacks.
  [S390] pm: monwriter power management callbacks.
  [S390] pm: memory hotplug power management callbacks
  [S390] pm: con3270 power management callbacks.
  [S390] pm: smsgiucv power management callbacks.
  [S390] pm: hvc_iucv power management callbacks
  [S390] PM: af_iucv power management callbacks.
  [S390] pm: netiucv power management callbacks.
  [S390] pm: iucv power management callbacks.
  [S390] iucv: establish reboot notifier
  [S390] pm: power management support for SCLP drivers.
  [S390] pm: tape power management callbacks
  [S390] pm: vmlogrdr power management callbacks
  [S390] pm: vmur driver power management callbacks
  [S390] pm: appldata power management callbacks
  [S390] pm: vmwatchdog power management callbacks.
  [S390] pm: zfcp driver power management callbacks
  [S390] pm: claw driver power management callbacks
  ...
2009-06-16 11:48:13 -07:00
Linus Torvalds
609106b9ac Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (38 commits)
  ps3flash: Always read chunks of 256 KiB, and cache them
  ps3flash: Cache the last accessed FLASH chunk
  ps3: Replace direct file operations by callback
  ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL()
  ps3: Correct debug message in dma_ioc0_map_pages()
  drivers/ps3: Add missing annotations
  ps3fb: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  ps3flash: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdata
  ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devices
  block/ps3: remove driver_data direct access of struct device
  ps3vram: Make ps3vram_priv.reports a void *
  ps3vram: Remove no longer used ps3vram_priv.ddr_base
  ps3vram: Replace mutex by spinlock + bio_list
  block: Add bio_list_peek()
  powerpc: Use generic atomic64_t implementation on 32-bit processors
  lib: Provide generic atomic64_t implementation
  powerpc: Add compiler memory barrier to mtmsr macro
  powerpc/iseries: Mark signal_vsp_instruction() as maybe unused
  powerpc/iseries: Fix unused function warning in iSeries DT code
  ...
2009-06-16 11:30:37 -07:00
Linus Torvalds
4858704da7 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  therm_windtunnel: Convert to a new-style i2c driver
  therm_adt746x: Convert to a new-style i2c driver
  windfarm: Convert to new-style i2c drivers
  therm_pm72: Convert to a new-style i2c driver
  i2c-viapro: Add new PCI device ID for VX855
  i2c/chips: Move max6875 to drivers/misc/eeprom
  i2c: Do not give adapters a default parent
  i2c: Do not probe for TV chips on Voodoo3 adapters
  i2c: Retry automatically on arbitration loss
  i2c: Remove void casts
2009-06-16 11:29:17 -07:00
David S. Miller
aaa7e2f74f sparc64: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:59:53 -07:00
David S. Miller
d1ae4ce3d0 sparc: Wire up sys_rt_tgsigqueueinfo().
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:58 -07:00
Stephen Rothwell
6ac5c61082 sparc: replace uses of CPU_MASK_ALL_PTR
CPU_MASK_ALL is the (deprecated) "all bits set" cpumask, defined as so:

	#define CPU_MASK_ALL (cpumask_t) { { ... } }

Taking the address of such a temporary is questionable at best,
unfortunately 321a8e9d (cpumask: add CPU_MASK_ALL_PTR macro) added
CPU_MASK_ALL_PTR:

	#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL)

Which formalizes this practice.  One day gcc could bite us over this
usage (though we seem to have gotten away with it so far).

[Description by Rusty Russell]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:55 -07:00
David S. Miller
9be12f9b1c sparc64: Add proper dynamic ftrace support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-06-16 04:56:53 -07:00
Robert P. J. Day
949e82744b sparc: Simplify code using is_power_of_2() routine.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:51 -07:00
Robert Reif
c9f5b7e77c sparc: move of_device common code to of_device_common
This patch moves code common to of_device_32.c and of_device_64.c into
of_device_common.h and of_device_common.c.

The only functional difference is in sparc32 where of_bus_default_map is
used in place of of_bus_sbus_map because they are equivelent.

There is still room for further code consolidation with some minor
refactoring.

Boot tested on sparc32 and compile tested on sparc64.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:49 -07:00
FUJITA Tomonori
d69864158e sparc: remove dma-mapping_{32|64}.h
This modifies SPARC32 to use struct dma_map ops. It means that we can
remove dma-mapping_{32|64}.h.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:47 -07:00
FUJITA Tomonori
797a756865 sparc: use dma_map_page instead of dma_map_single
This patch converts dma_map_single and dma_unmap_single to use
map_page and unmap_page respectively and removes unnecessary
map_single and unmap_single. map_page can be used to implement
map_single but the opposite is impossible. Having only dma_map_page in
struct dma_ops is enough.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:45 -07:00
FUJITA Tomonori
2e8fcfe2e5 sparc: add sync_single_for_device and sync_sg_for_device to struct dma_ops
This adds sync_single_for_device() and sync_sg_for_device() to struct
dma_ops in order to unify dma-mpping_{32|64}.h. dma-mpping_32.h needs them though dma-mpping_64.h doesn't.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:42 -07:00
FUJITA Tomonori
b9f69f4f4a sparc: move the duplication in dma-mapping_{32|64}.h to dma-mapping.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:41 -07:00
Hong H. Pham
280ff97494 sparc64: fix and optimize irq distribution
irq_choose_cpu() should compare the affinity mask against cpu_online_map
rather than CPU_MASK_ALL, since irq_select_affinity() sets the interrupt's
affinity mask to cpu_online_map "and" CPU_MASK_ALL (which ends up being
just cpu_online_map).  The mask comparison in irq_choose_cpu() will always
fail since the two masks are not the same.  So the CPU chosen is the first CPU
in the intersection of cpu_online_map and CPU_MASK_ALL, which is always CPU0.
That means all interrupts are reassigned to CPU0...

Distributing interrupts to CPUs in a linearly increasing round robin fashion
is not optimal for the UltraSPARC T1/T2.  Also, the irq_rover in
irq_choose_cpu() causes an interrupt to be assigned to a different
processor each time the interrupt is allocated and released.  This may lead
to an unbalanced distribution over time.

A static mapping of interrupts to processors is done to optimize and balance
interrupt distribution.  For the T1/T2, interrupts are spread to different
cores first, and then to strands within a core.

The following is some benchmarks showing the effects of interrupt
distribution on a T2.  The test was done with iperf using a pair of T5220
boxes, each with a 10GBe NIU (XAUI) connected back to back.

  TCP     | Stock       Linear RR IRQ  Optimized IRQ
  Streams | 2.6.30-rc5  Distribution   Distribution
          | GBits/sec   GBits/sec      GBits/sec
  --------+-----------------------------------------
    1       0.839       0.862          0.868
    8       1.16        4.96           5.88
   16       1.15        6.40           8.04
  100       1.09        7.28           8.68

Signed-off-by: Hong H. Pham <hong.pham@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:28 -07:00
David S. Miller
4fd78a5f1e sparc64: Use new dynamic per-cpu allocator.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:27 -07:00
David S. Miller
0c243ad81f sparc64: Only allocate per-cpu areas for possible cpus.
This gets us real close to the generic implementation of
setup_per_cpu_areas() except:

1) We store the per-cpu offset into the trap_block[], whereas
   the generic code has it's own static array.

2) We have to initialize the %g5 register to hold the boot cpu's
   per-cpu area offset.

3) The OBP/MDESC cpu info scan is performed at the end.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:25 -07:00
David S. Miller
73fffc037e sparc64: Get rid of real_setup_per_cpu_areas().
Now that we defer the cpu_data() initializations to the end of per-cpu
setup, we can get rid of this local hack we had to setup the per-cpu
areas eary.

This is a necessary step in order to support HAVE_DYNAMIC_PER_CPU_AREA
since the per-cpu setup must run when page structs are available.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:23 -07:00
David S. Miller
b696fdc259 sparc64: Defer cpu_data() setup until end of per-cpu data initialization.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:22 -07:00
David S. Miller
a2094502dc sparc64: Make mdesc_fill_in_cpu_data take a cpumask_t pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:21 -07:00
David S. Miller
890db403d5 sparc: Call OF and MD cpu scanning explicitly from paging_init()
We need to split up the cpu present mask setup from the cpu_data
initialization, and this is a first step towards that.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:19 -07:00
David S. Miller
5052f525fd sparc64: Refactor MDESC cpu scanning code using an iterator.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:17 -07:00
David S. Miller
9bab54143c sparc64: Refactor OBP cpu scanning code using an iterator.
With feedback from Sam Ravnborg.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:16 -07:00
David S. Miller
8249778908 sparc64: Use BUILD_BUG_ON() in trap_init().
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:13 -07:00
David S. Miller
5a5488d3bb sparc64: Store per-cpu offset in trap_block[]
Surprisingly this actually makes LOAD_PER_CPU_BASE() a little
more efficient.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:11 -07:00
David S. Miller
19f0fa3fb3 sparc64: Move trap_block[] definitions into a new header file.
Later we're going to want to get at these definitions from
asm/percpu.h and that's not possible via cpudata.h because
of the set of dependencies the non-trap_block[] stuff has.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:08 -07:00
David S. Miller
557fe0e884 sparc64: Reclaim trap_block[]->hdesc
This really isn't necessary at all, a local variable suits the
job just fine.

This frees up 8 bytes in the trap_block[] that we can use later
to store the per-cpu base addresses.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16 04:56:08 -07:00
Hans-Joachim Picht
155af2f95f [S390] s390: hibernation support for s390
This patch introduces the hibernation backend support to the
s390 architecture. Now it is possible to suspend a mainframe Linux
guest using the following command:

echo disk > /sys/power/state

Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 10:31:22 +02:00
Gerald Schaefer
524dbcdad7 [S390] pm: appldata power management callbacks
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 10:31:15 +02:00
Martin Schwidefsky
6664845cef [S390] cio: force console function
If something goes wrong in a suspend / resume cycle a ccw based console
if very likely in the suspended state and cannot print anything.
Introduce ccw_device_force_console to force the wake up of the console
device to be able to print the oops message. The console device drivers
should use this function only if the system paniced.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 10:31:11 +02:00
Hans-Joachim Picht
7db11a363f [S390] pm: add kernel_page_present
Fix the following build failure caused by make allyesconfig using
CONFIG_HIBERNATION and CONFIG_DEBUG_PAGEALLOC

kernel/built-in.o: In function `saveable_page':
kernel/power/snapshot.c:897: undefined reference to `kernel_page_present'
kernel/built-in.o: In function `safe_copy_page':
kernel/power/snapshot.c:948: undefined reference to `kernel_page_present'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 10:31:11 +02:00
Sebastian Ott
7e597a21a1 [S390] pm: ccwgroup bus power management callbacks
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 10:31:08 +02:00
Sebastian Ott
823d494ac1 [S390] pm: ccw bus power management callbacks
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 10:31:08 +02:00
Benjamin Herrenschmidt
2fae0a524b powerpc: Add memory clobber to mtspr()
Without this clobber, mtspr can be re-ordered by gcc vs. surrounding
memory accesses. While this might be ok for some cases, it's not in
others and I'm not confident that all callers get it right (In fact
I'm sure some of them don't).

So for now, let's make mtspr() itself contain a memory clobber until
we can audit and fix everything, at which point we can remove it
if we think it's worth doing so.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:46 +10:00
Benjamin Herrenschmidt
48c931125b powerpc: Fix invalid construct in our CPU selection Kconfig
commit 5b7c3c918c introduced an invalid
construct in our CPU selection. This caused warnings, though it still
appeared to do the right thing.

This fixes it properly by having separate formal definitions of
PPC_BOOK3S_32 and PPC_BOOK3S_64 and one statement defining
PPC_BOOK3S based on the two above.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:46 +10:00
Michael Ellerman
ba55bd7436 powerpc: Add configurable -Werror for arch/powerpc
Add the option to build the code under arch/powerpc with -Werror.

The intention is to make it harder for people to inadvertantly introduce
warnings in the arch/powerpc code. It needs to be configurable so that
if a warning is introduced, people can easily work around it while it's
being fixed.

The option is a negative, ie. don't enable -Werror, so that it will be
turned on for allyes and allmodconfig builds.

The default is n, in the hope that developers will build with -Werror,
that will probably lead to some build breaks, I am prepared to be flamed.

It's not enabled for math-emu, which is a steaming pile of warnings.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:45 +10:00
Timur Tabi
9317726de4 powerpc: Introduce macro spin_event_timeout()
The macro spin_event_timeout() takes a condition and timeout value
(in microseconds) as parameters.  It spins until either the condition is true
or the timeout expires.  It returns the result of the condition when the loop
was terminated.

This primary purpose of this macro is to poll on a hardware register until a
status bit changes.  The timeout ensures that the loop still terminates if the
bit doesn't change as expected.  This macro makes it easier for driver
developers to perform this kind of operation properly.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Geoff Thorpe <Geoff.Thorpe@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:44 +10:00
Sean MacLennan
79290e4b69 powerpc/warp: Fix ISA_DMA_THRESHOLD default
If no device is passed to __dma_alloc_coherent, it defaults to using ISA_DMA_THRESHOLD
for the mask. This patch provides a reasonable default rather than 0.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:44 +10:00
Nate Case
247608234e powerpc/bootwrapper: Custom build options for XPedite52xx targets
Some XPedite52xx boards have a legacy boot loader requiring some special
care in the boot wrapper.  The use of cuboot-85xx is needed to fix
up embedded device trees, and a custom link address is specified to
accommodate the boot loader and larger kernel image sizes used on X-ES
MPC85xx platforms.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:20 -05:00
Nate Case
6277597819 powerpc/85xx: Add defconfig for X-ES MPC85xx boards
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:17 -05:00
Nate Case
317bf653a6 powerpc/85xx: Add dts files for X-ES MPC85xx boards
Add device tree source files for various MPC85xx boards from Extreme
Engineering Solutions.  Supported boards include XPedite5370,
XPedite5200, XPedite5301, XPedite5330, and XCalibur1501.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:16 -05:00
Nate Case
3038acf909 powerpc/85xx: Add platform support for X-ES MPC85xx boards
Add support for X-ES single-board computers based on the Freescale
MPC85xx processors.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:13 -05:00
Heiko Schocher
8159df72d4 83xx: add support for the kmeter1 board.
The following series implements basic board support for
the kmeter1 board from keymile, based on a MPC8360.

This series provides the following functionality:

- The board can boot with a serial console on UART1
- Ethernet:
    UCC1 in RGMII mode
    UCC2 in RGMII mode
    UCC4 in RMII mode
    UCC5 in RMII mode
    UCC6 in RMII mode
    UCC7 in RMII mode
    UCC8 in RMII mode

    following patch is necessary for working UCC in RMII mode:

    http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html

- Flash accessed via MTD layer

  On this hardware there is an Intel P30 flash, following patch
  series is necessary for working with this hardware:

  http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html

- I2C using I2C Bus 1 from the MPC8360 cpu

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:09 -05:00
Kevin Hao
40aa735335 powerpc/85xx: Add nor flash partitions for mpc8569mds
Add 4 partitions in nor flash. Also fix nor flash bank width bug. The
flash is capable of x8/x16 width but is configured for x8.

Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:32 -05:00
mware@internode.on.net
e86b4998f0 powerpc/fsl: Increase the number of possible localbus banks
Currently the fsl,*lbc devices support 8 banks (ie OR and BR registers).
This is adequate for most pq2 and pq3 processors, but not the MPC8280 which
has 12 banks.

Signed-Off-By: Mark Ware <mware@elphinstone.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:32 -05:00
Nate Case
7b9edb9d61 powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx
Some MPC85xx platforms do support 4 ethernet ports, so make sure the boot
wrapper fixes up all of them in the fdt.

Since MAC addresses are at the end of the bd_t structure there is no harm
in expanding to support 4 MAC address on older 85xx systems that might not
have that many.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:32 -05:00
Gerhard Pircher
f1f8b4948d powerpc: Enable additional BAT registers in setup_745x_specifics()
Currently the kernel expects the additional four IBAT and DBAT registers
to be available, but doesn't enable these registers on 745x CPUs, which
have them disabled after reset. Thus set the HIGH_BAT_EN bit in HID0
register, if the corresponding MMU feature is defined.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:31 -05:00
Peter Korsgaard
b7d66c88c9 powerpc/mpc83xx: Fix usb mux setup for mpc834x
usb0 and usb1 mux settings in the sicrl register were swapped (twice!)
in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci
and full speed devices.

The USB port config on mpc834x is done using 2 muxes: Port 0 is always
used for MPH port 0, and port 1 can either be used for MPH port 1 or DR
(unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM
figure 1-4..

mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit
positions of the usb0 / usb1 mux settings swapped. It would basically
work if you specified port1 instead of port0 for the MPH controller (and
happened to use ULPI phys), which is what all the 834x dts have done,
even though that configuration is physically invalid.

Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:31 -05:00