Current Power system firmware caps the PVR list array size at 16 entries
during CAS (Client Architecture Support) negotiation. Passing more than
capped size to older firmware could cause an undefined behaviour and
breaks compatibility.
Future Power system firmware releases will lift this restriction and
support greater than 16 array entries.
Ensure that when running on Power11 or below hardware, the number
of PVR entries passed during CAS negotiation does not exceed the
firmware-imposed limit of 16.
In prom_send_capabilities(), compute start_index to skip the oldest
leading pvrs[] entries when running on Power11 or below hardware, so
that the pointer passed to ibm,client-architecture-support points to
ibm_architecture_vec.pvrs[start_index], presenting exactly 16 entries to
firmware.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Tested-by: Praveen K Pandey <praveen@linux.ibm.com>
Reviewed-by: Nikhil Kumar Singh <nikhilks@linux.ibm.com>
Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260806051120.3703698-2-mahesh@linux.ibm.com
When c2c_hists__init() or c2c_hists__reinit() calls hpp_list__parse()
and it fails partway through, format structures registered via
perf_hpp_list__column_register() and perf_hpp_list__register_sort_field()
are left on the hpp_list.
In c2c_hists__init(), only one of the callers, c2c_he__alloc_hists(),
handled this with perf_hpp__reset_output_field(), while perf_c2c_report()
did not, leaking the partially registered entries.
In c2c_hists__reinit(), neither perf_c2c_report() nor resort_cl_cb()
clean up on failure.
Fix by adding cleanup inside both functions themselves, so all callers
are protected, and remove the now redundant reset in c2c_he__alloc_hists().
Fixes: 78b2754378 ("perf c2c report: Add sample processing")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Assisted-by: Opencode:mimo-v2.5-free
Assisted-by: Opencode:DeepSeek-V4-Flash-free
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
hpp_list__parse() has three bugs:
1. The PARSE_LIST macro resets ret = 0 at the start of each invocation,
so an error from output parsing is silently overwritten when the sort
parsing block runs. The function returns success with partially
initialized state.
2. When the caller passes a non-NULL output_ or sort_ string, but
strdup() returns NULL due to OOM, NULL is passed to PARSE_LIST which
treats it as empty input (the "if (!_list) break" branch). No error
is returned.
3. When the called _fn function fails and returns something other than
-ESRCH or -EINVAL (-ENOMEM, for instance) it was not bailing out of
the strtok loop.
Fix them by checking strdup() return values before proceeding and adding
a cleanup label so that ret from each PARSE_LIST call is checked before
the next runs, preserving the first error.
The early exits now skip perf_hpp__setup_output_field(), which means
c2c_hists__reinit() can return a non-zero value in cases that previously
always succeeded silently. Both callers discarded its return:
resort_cl_cb() continued into hists__collapse_resort() on a broken list,
and perf_c2c__report() proceeded with uninitialised hists. Fix the full
chain: check and propagate the error in resort_cl_cb() -- hists__iterate_cb()
already stops iteration and returns the callback error -- and check both
c2c_hists__reinit() and hists__iterate_cb() in perf_c2c__report().
Also turn PARSE_LIST into a function, using a switch to catch other
errors, converting the called functions to return an appropriate errno
instead of -1 on failure.
Also make the two callers that iterate sort_dimension__add() and
output_field_add() handle the newly propagated errors: setup_sort_list()
and setup_output_list() only checked for -EINVAL and -ESRCH, so an
-ENOMEM from a failed allocation was silently overwritten by the next
loop iteration. Break out of the loop and propagate any other error.
The hpp_list__parse() fixes were developed with AI assistance from
Claude:claude-sonnet-4.6, and the setup_sort_list()/setup_output_list()
caller fixes with AI assistance from Opencode:mimo-v2.5-free and
Opencode:DeepSeek-V4-Flash-free.
Fixes: 2d388bd0c9 ("perf c2c report: Add stdio output support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-sonnet-4.6
Assisted-by: Opencode:mimo-v2.5-free
Assisted-by: Opencode:DeepSeek-V4-Flash-free
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- Remove dependency on deprecated DRM simple KMS helpers
. Replaces drm_simple_encoder_init() with drm_encoder_init() across dp,
dpi, dsi, vidi and hdmi.
. Adds per-driver drm_encoder_funcs with .destroy = drm_encoder_cleanup,
removing the intermediate layer between the drivers and atomic modesetting.
- Add error handling to drm_encoder_init()
. Checks the return code at every call site instead of ignoring it.
. Prevents silent encoder creation failures and drm_encoder_cleanup() on an
uninitialized encoder.
Bug fix for Exynos HDMI DDC adapter refcounting
- Take an i2c adapter module reference
. Switches to of_get_i2c_adapter_by_node() / i2c_put_adapter() so the
adapter module reference is held while the DDC bus is in use.
. Makes an unload attempt fail gracefully with -EBUSY instead of blocking
uninterruptibly in i2c_del_adapter().
-----BEGIN PGP SIGNATURE-----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=/qfD
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Cleanup and modernization for Exynos encoders
- Remove dependency on deprecated DRM simple KMS helpers
. Replaces drm_simple_encoder_init() with drm_encoder_init() across dp,
dpi, dsi, vidi and hdmi.
. Adds per-driver drm_encoder_funcs with .destroy = drm_encoder_cleanup,
removing the intermediate layer between the drivers and atomic modesetting.
- Add error handling to drm_encoder_init()
. Checks the return code at every call site instead of ignoring it.
. Prevents silent encoder creation failures and drm_encoder_cleanup() on an
uninitialized encoder.
Bug fix for Exynos HDMI DDC adapter refcounting
- Take an i2c adapter module reference
. Switches to of_get_i2c_adapter_by_node() / i2c_put_adapter() so the
adapter module reference is held while the DDC bus is in use.
. Makes an unload attempt fail gracefully with -EBUSY instead of blocking
uninterruptibly in i2c_del_adapter().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patch.msgid.link/20260802061039.73544-1-inki.dae@samsung.com
AF_XDP rings are allocated from setsockopt() and can be mapped into user
space. The shared xskq_create() helper allocates the ring backing memory,
but the user-controlled and long-lived allocation is not charged as kmem
to the allocating memory cgroup.
The current implementation uses vmalloc_user(), which allocates the
backing pages with GFP_KERNEL | __GFP_ZERO. Use the same VM_USERMAP
vmalloc path, but pass GFP_KERNEL_ACCOUNT so the ring backing pages are
attributed to memcg/kmem and can be constrained by existing cgroup memory
limits. This keeps the existing zeroing and mmap semantics while avoiding
AF_XDP-specific optmem or RLIMIT_MEMLOCK accounting.
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260731164623.4694-2-zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TX mitigation logic only sets the Interrupt on Completion bit once
every tx_coal_frames descriptors (STMMAC_TX_FRAMES = 25), with the
tx_coal_timer hrtimer (STMMAC_COAL_TX_TIMER = 5000 us) as the only
fallback. TX skbs are freed exclusively from the TX completion path,
so any flow that keeps fewer than 25 frames in flight has all of its
skbs held for up to 5 ms after transmission.
Paced flows never queue enough frames to reach the frame threshold:
TCP Small Queues caps the amount of unfreed data at roughly two pacing
intervals worth, which at moderate pacing rates is only a couple of
packets. Every small burst then stalls until the coalesce timer fires,
and throughput collapses to approximately tsq_limit / tx_coal_timer
regardless of link capacity.
This is easily reproducible with BBR, which paces its output and thus
keeps only a few frames in flight at a time. On a YT6801
(dwmac-motorcomm) equipped Orange Pi 5 Pro, a BBR upload over a ~23 ms
RTT path is capped at 5.24 Mbit/s, while CUBIC reaches 207 Mbit/s on
the same path. BBR measures the stalled send rate as the path
bandwidth and locks its estimate near the floor, so the connection
never recovers. Lowering the coalesce settings with ethtool -C
(tx-usecs 100 tx-frames 1) lifts the same transfer to 447 Mbit/s,
confirming the mechanism.
Fix this by setting the IC bit on the last descriptor of every xmit
burst, i.e. whenever netdev_xmit_more() reports that no further frames
are pending in the current dequeue batch. Frame-based coalescing still
applies within a burst, bulk traffic keeps batching through qdisc bulk
dequeue and NAPI polling, and the coalesce timer becomes a pure
fallback instead of the primary completion mechanism for lightly
queued flows.
tx-frames 0 keeps its meaning of timer-based mitigation only.
Signed-off-by: Johan Alvarado <contact@c127.dev>
Link: https://patch.msgid.link/20260731194522.55069-1-contact@c127.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DECLARE_EVENT_CLASS emitted __bpf_trace_btf_ids_<call> through
BTF_ID_LIST_GLOBAL, i.e. a global symbol named after the event class.
The class name is not unique across the kernel, so the symbol
multiply-defines whenever two translation units instantiate the same
class.
Switch to the file-local BTF_ID_LIST: the list is reached
only through the event_class_<call>.btf_ids pointer, initialised in the
same unit, so tracefs readers never reference the symbol by name and
resolve_btfids still fills the now-local .BTF_ids entries.
The handcrafted syscall classes are the one cross-unit consumer: give
them their own local BTF_ID_LIST rather than importing the generated
sys_{enter,exit} lists.
Link: https://patch.msgid.link/20260730-b4-fix_btf_tracefs-v2-1-6b66da8dc103@meta.com
Fixes: eadc0725ab ("tracing: Expose tracepoint BTF ids via tracefs")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ff58b01c-3f5e-4d55-be82-609d2faaf12e@sirena.org.uk/
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tariq Toukan says:
====================
net/mlx5: allocate doorbells from dma pools
This series by Nimrod extends the mlx5 internal DMA pool infrastructure
to doorbell objects.
Doorbell allocations currently use a separate pgdir allocator. Moving
them to the common mlx5 DMA pool implementation keeps the same coherent
DMA allocation model while sharing the pool code used by mlx5_frag_buf.
The series first creates per-node doorbell pools, then switches doorbell
allocation to use them, and finally exposes their usage through debugfs.
====================
Link: https://patch.msgid.link/20260803132520.2891860-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allocate doorbells from dma pools instead of the pgdir allocator.
Doorbell records remain cache-line sized coherent DMA allocations, but
their sub-allocation is now handled by the common mlx5 DMA pool
infrastructure.
This also makes doorbell allocation honor the requested NUMA node when
reusing existing backing pages. The old pgdir allocator used the
requested node only when allocating a new pgdir page; later
allocations scanned one global pgdir list and could take any pgdir with
a free entry, even if that page had been allocated for a different
NUMA node. Selecting the per-node DMA pool before sub-allocation keeps
reused doorbell records on pages allocated for the requested node.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260803132520.2891860-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vincent Jardin says:
====================
dpll: zl3073x: add Microchip ZL30643 support
The Microchip ZL30643 (chip ID 0x0E3B) is a 3 DPLL channel member of
the ZL3064x timing family, register compatible with the
ZL30733 of the ZL3073x family.
Patch 1 describes it in the binding as a fallback to the register-
equivalent microchip,zl30733.
Patch 2 adds the 0x0E3B runtime chip-ID table entry; no new match
strings, the fallback binds via the existing microchip,zl30733
entry.
====================
Link: https://patch.msgid.link/20260730-for-upstream-zl30643-v2-0-0ea0bbd03755@free.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Microchip ZL30643 is a 3-channel ZL3064x line-card part that is
register compatible with the ZL30733. Only the runtime chip-ID table
needs the 0x0E3B entry so the probe resolves the channel count (3)
and flags.
The ZL3073X_FLAG_REF_PHASE_COMP_32 flag applies unchanged: the
ref_phase path
dpll_meas_ctrl::en -> ref_phase_0P/0N
-> ref_phase_offset_compensation -> ref_phase_err_read_rqst
is identical between ZL3064x and ZL3073x. No new device flag is needed.
Test: once register, for instance, we get:
devlink dev param set spi/spi0.0 name clock_id value 3733 cmode driverinit
devlink dev reload spi/spi0.0
devlink dev param set spi/spi2.1 name clock_id value 3643 cmode driverinit
devlink dev reload spi/spi2.1
dpll device show | grep clock-id
clock-id: 3733
clock-id: 3733
clock-id: 3733
clock-id: 3643
clock-id: 3643
clock-id: 3643
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://patch.msgid.link/20260730-for-upstream-zl30643-v2-2-0ea0bbd03755@free.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Microchip ZL30643 (chip ID 0x0E3B) is a member of the ZL3064x
line card timing family. It is register compatible with the 3-channel
ZL30733 (chip ID 0x0E95) of the ZL3073x family: both datasheets
describe the same register map and use the same chip-ID encoding.
Describe it with a fallback to microchip,zl30733 rather than a new
standalone compatible.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260730-for-upstream-zl30643-v2-1-0ea0bbd03755@free.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I am already listed as a maintainer for the HNS3 and HIBMCGE drivers,
but not for the broader Hisilicon Network Subsystem entry, whose file
pattern covers drivers/net/ethernet/hisilicon/ (e.g. the legacy hns
driver). As a result, patches to those files are not CC'd to me.
Add myself alongside Jian Shen to help maintain these legacy Hisilicon
ethernet drivers and ensure patches in this tree are routed to me.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Jian Shen <shenjian15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260804130554.871716-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A possible bug was found in investigate_read_descriptor() and a fix was
proposed. Since this is an orphan driver for hardware that is old,
removing the driver was suggested instead. This patch removes the driver.
Jakub: clean up the Kconfig and platform configs
Link: https://lore.kernel.org/netdev/2026080158-next-diligent-b4ce@gregkh
Signed-off-by: Pablo Vallespín Aranguren <pablopva014@gmail.com>
Link: https://patch.msgid.link/am48DR5FC-xTY3-D@ThinkPad-P15
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Junyang Han says:
====================
Add ZTE DingHai Ethernet PF driver
This series adds initial support for the ZTE DingHai Ethernet controller,
a high-performance PCIe Ethernet device supporting SR-IOV, hardware
offloading, and advanced virtualization features.
This is the initial submission and only includes the PF (Physical Function)
driver. The VF (Virtual Function) driver will be submitted separately.
====================
Link: https://patch.msgid.link/20260802160048653KdUvSUgDsEs4zwYF9Ey0q@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement PCI configuration space access, BAR mapping, capability
scanning (common/notify/device), and hardware queue register
definitions for DingHai PF device.
Signed-off-by: Junyang Han <han.junyang@zte.com.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add basic framework for ZTE DingHai ethernet PF driver, including
Kconfig/Makefile build support and PCIe device probe/remove skeleton.
Signed-off-by: Junyang Han <han.junyang@zte.com.cn>
Link: https://patch.msgid.link/202608021621043761zZMwCny1e6y0TRFLQHxx@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptp_clock_adjtime() validates an ADJ_FREQUENCY request by converting the
requested scaled ppm to ppb and comparing it against ops->max_adj:
long ppb = scaled_ppm_to_ppb(tx->freq);
if (ppb > ops->max_adj || ppb < -ops->max_adj)
return -ERANGE;
scaled_ppm_to_ppb() computes (1 + ppm) * 125 >> 13 in s64. For a
sufficiently large tx->freq the multiplication overflows s64 and wraps,
so the resulting ppb can fall back within [-max_adj, max_adj] and pass
the check. The unclamped tx->freq is then handed to ->adjfine(), where
drivers scale it again (e.g. scaled_ppm * 762939453125 in ptp_idt82p33)
and program a bogus frequency word.
For example tx->freq = 147573952589676412 makes (1 + ppm) * 125 equal
2^64 + 9, which wraps to ppb == 0 and is accepted.
The caller already has write access to the PHC, so this hardens the
max_adj sanity check rather than crossing a privilege boundary, and
well-behaved user space (e.g. ptp4l) never requests such values. It is
a follow-up to commit 475b92f932 ("ptp: improve max_adj check against
unreasonable values"), which handled the analogous s32 narrowing but not
this multiplication overflow.
Detect the overflow with check_*_overflow() and reject the request in
ptp_clock_adjtime() instead of acting on the wrapped value.
Signed-off-by: Deep Shah <deepshah146@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20260801222923.39017-2-deepshah146@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a reviewer asks a developer to run an upstream test during code
review, it's often ambiguous whether the test was actually run against
a real device, or just against netdevsim. Print the driver name and
ifname at the start of the test, e.g.:
# Interface: enp0s13f0u1u4, driver: r8152
TAP version 13
1..1
ok 1 ...
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260803211944.2166211-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On AMD Genoa/Turin platforms the BMC-provided USB-Ethernet gadget
(American Megatrends, VID 0x046b PID 0xffb0) intermittently fails to
respond to ARP after AC cold boot. usbmon captures a stale
NETWORK_CONNECTION(off) immediately followed by
NETWORK_CONNECTION(on) on the interrupt endpoint (~130us apart)
after enumeration. Because alloc_netdev() leaves
__LINK_STATE_NOCARRIER cleared, netif_carrier_ok() returns true
when the spurious OFF arrives, so usbnet_cdc_status() cannot
recognise it as redundant and schedules EVENT_LINK_CHANGE.
__handle_link_change() then calls unlink_urbs(), killing ~60 rx
URBs whose payload has already been DMA'd into memory — xHCI trace
confirms them completing as -ECONNRESET with non-zero residual
length. rx_complete() drops these unconditionally. The following
ON restores the carrier and re-submits URBs, but the ARP reply is
already lost; the interface looks "up but silent" until ifdown/ifup.
Fix this by adding a device-specific quirk with FLAG_LINK_INTR set,
which makes usbnet_probe() call netif_carrier_off() after bind.
With initial carrier == OFF, usbnet_cdc_status() recognises the
spurious OFF as matching the current state and drops it; the
subsequent ON is the first real event and brings the link up
cleanly without ever tearing down the rx queue. The scheduled
link-change kevent is harmless because EVENT_DEV_OPEN is not yet
set at probe time.
This is applied as a device-specific quirk rather than a change to
the shared cdc_info driver_info because some CDC devices never
send NETWORK_CONNECTION notifications; forcing carrier off for
them would leave the link permanently DOWN. Restricting the change
to this VID/PID keeps that class of device untouched.
Tested on Genoa and Turin across 100+ AC cold boot cycles; ping
first-packet success rate went from intermittent to 100%.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Link: https://patch.msgid.link/20260730051341.24930-1-guojinhui.liam@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikhil P. Rao says:
====================
pds_core: Add PLDM firmware update and host backed memory support
This series adds PLDM-based firmware update support to the pds_core
driver. PLDM (Platform Level Data Model) is a DMTF standard for firmware
management that provides a vendor-neutral interface for firmware updates.
The implementation uses the kernel's pldmfw library for package parsing
and component matching. Users can update entire firmware packages or
individual components via devlink flash. Component information is
displayed via devlink info, showing firmware versions and update status
for each component.
The series also adds host backed memory support, allowing firmware to
request memory pages from the host for its operations.
====================
Link: https://patch.msgid.link/20260730-upstream_v8-v12-0-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some newer AMD/Pensando cards have minimal memory and there are cases
where components, specifically in the control plane, need more memory.
This series adds support for host backed DMA memory that can be used
by the firmware for the previously mentioned cases.
Host memory allocation is best-effort: if some allocations fail, the
driver continues with whatever succeeded. Firmware gracefully degrades
when less memory is available than requested.
Signed-off-by: Vamsi Atluri <Vamsi.Atluri@amd.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-5-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add detailed component information display via devlink info. This
allows users to see individual firmware components and their versions.
Components are reported as fixed, running, or stored based on their
firmware-provided flags.
Example output:
$ devlink dev info pci/0000:00:05.0
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw.bootloader 1.2.3
fw.uboot 1.60.0-73
fw 1.60.0-73
fw.cpld 3.18
stored:
fw.bootloader 1.2.3
fw.uboot 1.60.0-73
fw.uboot.gold 1.50.0-22
fw.gold 1.50.0-22
fw 1.60.0-73
fw.cpld 3.18
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-4-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement PLDM FW Update in the pds_core driver using the upstream
pldmfw API. This allows updating an entire PLDM FW package at once
or updating specific firmware components by name.
Flash the entire image:
devlink dev flash pci/0000:b5:00.0 file firmware.pldmfw
Flash a specific component from the PLDM FW package:
devlink dev flash pci/0000:b5:00.0 \
file firmware.pldmfw component fw.cpld
Per-component update uses driver-defined component names (fw, fw.cpld,
etc.). Not all components support per-component update - devlink will
reject the request if the specified component cannot be updated.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-3-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new capabilities field in struct pds_core_dev_identity,
which requires bumping the identity version to 2, i.e.
PDS_CORE_IDENTITY_VERSION_2. If version 2 negotiation fails,
then quietly fall back to version 1. If version 1 negotiation
fails, then driver load will fail.
Another patch in the series will make use of the capabilities
field.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-2-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there aren't any use-cases that require special handling
on whether or not to print devcmd failures. Specifically
non-generic failures, i.e. not supported failures. Add support to
allow these messages to be suppressed. This will be used when
adding support to negotiate PDS_CORE_IDENTITY_VERSION_2.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-1-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_info_getsockopt() reads a callback from rds_info_funcs and invokes it
without protecting the callback's lifetime. Transport modules register
functions stored in this array. For example, rds_tcp.ko registers
rds_tcp_tc_info() for RDS_INFO_TCP_SOCKETS.
This permits the following interleaving:
CPU0 CPU1
rds_info_getsockopt()
func = rds_tcp_tc_info
rmmod rds_tcp
rds_tcp_exit()
rds_info_deregister_func()
rds_info_funcs[offset] = NULL
free rds_tcp module text
func()
The reader can therefore branch to an address in unloaded module text.
Protect callback invocation with SRCU. Enter the SRCU read-side critical
section before loading the callback and leave it only after the callback
returns. Clear the callback with WRITE_ONCE() and call
synchronize_srcu() before deregistration returns, preventing module unload
from freeing its text while an old reader is still executing it. SRCU is
required because callbacks such as RDS_INFO_COUNTERS can sleep.
Keep the callback array unannotated and use READ_ONCE() and WRITE_ONCE()
for concurrent slot access so sparse does not have to apply __rcu through
the function-pointer typedef. Replace the two callback-slot BUG_ON()
checks with WARN_ON_ONCE() and return without changing the slot on
mismatch.
Link: https://lore.kernel.org/netdev/20260720184955.3008978-1-nicoyip.dev@gmail.com/
Suggested-by: Allison Henderson <achender@kernel.org>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Link: https://patch.msgid.link/20260801054234.3535077-1-nicoyip.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tja1102_p0_probe() schedules work to register the second port. That work
uses the Port 0 private data and phydev. The private data is
devm-allocated, but the driver does not wait for the pending work on
remove.
Store the Port 0 private data in phydev->priv and add a remove callback.
The callback cancels the registration work before devres teardown frees
the state.
This issue was found by a static analysis tool.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://patch.msgid.link/20260801140643.1871-1-getshell@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pfcp_net_exit_rtnl() iterates pfcp devices whose sockets
are in the dying netns and queues them for destruction.
So the devices may reside in different netns.
Let's use unregister_netdevice_queue_net() to support per-netns
device unregistration.
list_del() is changed to list_del_init() to avoid queueing the
same device twice.
Even after pfcp_net_exit_rtnl() queues a cross-netns pfcp device,
pfcp_dellink() could be called concurrently for it (once RTNL is
removed). In such a case, __rtnl_net_unlock() will perform the
unregistration.
We can see pfcp0 below is unregistered by the per-netns work
instead of cleanup_net().
# bpftrace -e '#include <linux/netdevice.h>
kprobe:pfcp_dev_uninit {
$dev = (struct net_device *)arg0;
printf("PID: %d | DEV: %s%s\n", pid, $dev->name, kstack());
}
kprobe:pfcp_net_exit_rtnl {
printf("PID: %d%s\n", pid, kstack());
}' &
# ip netns add ns1
# ip netns add ns2
# ip -n ns1 link add pfcp0 link-netns ns2 type pfcp
# ip netns del ns2
PID: 12
pfcp_net_exit_rtnl+5
ops_undo_list+702
cleanup_net+1122
process_scheduled_works+2538
...
PID: 462 | DEV: pfcp0
pfcp_dev_uninit+5
unregister_netdevice_many_notify+7129
unregister_netdevice_many_net+1050
rtnl_net_work_func+136
process_scheduled_works+2538
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260731224406.2444121-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct pfcp_dev.net is the netns where the backend pfcp socket
resides.
struct pfcp_dev is linked to the pfcp_net.pfcp_dev_list of
the socket's netns.
During netns dismantle or module unload, pfcp_net_exit_rtnl()
iterates the list and queues devices for destruction regardless
of the devices' netns.
Thus, once RTNL is removed, the list can be modified concurrently
from different netns due to device removal.
Let's protect it with per-netns mutex.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260731224406.2444121-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler.
Fixes: cc21191b58 ("dibs: Move data path to dibs layer")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
prestera_fw_hdr_parse() reads the firmware header before checking
that the firmware image contains that header.
Reject images shorter than struct prestera_fw_header before decoding the
magic and version fields.
Fixes: 4c2703dfd7 ("net: marvell: prestera: Add PCI interface support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260731141500.1-prestera-v2-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 4f61f133f3 ("net: tap: NULL pointer derefence in
dev_parse_header_protocol when skb->dev is null") fixed a crash in
tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb().
This is required because virtio_net_hdr_to_skb() may invoke
dev_parse_header_protocol(), which dereferences skb->dev. Without the
assignment, a NULL pointer dereference can occur.
However, tap_get_user_xdp() still parses the virtio-net header before
assigning skb->dev. When the vhost TX path passes an XDP buffer containing
a GSO virtio-net header but the protocol is set to zero on purpose,
tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev
is still NULL, resulting in a crash.
Fix this by looking up the tap device and assigning skb->dev before calling
tun_vnet_hdr_to_skb(), matching the ordering already used in
tap_get_user(). Preserve the existing RCU read-side critical section across
dev_queue_xmit().
Fixes: 924a9bc362 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260802224612.264563-1-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a function-like macro expands to an expression, that expression
doesn't need a semicolon after it. All uses have been verified to
have their own semicolons.
This was found using the following Coccinelle semantic patch:
@r@
identifier i : script:ocaml() { String.lowercase_ascii i = i };
expression e;
@@
*#define i(...) e;
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20260801191002.1383835-10-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a function-like macro expands to an expression, that expression
doesn't need a semicolon after it. All uses have been verified to
have their own semicolons.
This was found using the following Coccinelle semantic patch:
@r@
identifier i : script:ocaml() { String.lowercase_ascii i = i };
expression e;
@@
*#define i(...) e;
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20260801191002.1383835-5-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENST start/on/off time register definitions for Q0 and Q1 are not
referenced anywhere in the driver. The driver calculates these register
addresses from the ENST base offset and the queue index instead of using
fixed defines, removing the unused macros.
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260803062834.3865755-1-vineeth.karumanchi@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack.
Fixes: e490d1d85c ("[IPV6] IP6TUNNEL: Split out generic routine in ip6ip6_err().")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/fe1a5e765fbca88d69391887f0ed26a19e3e4d39.1785736562.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ncsi_send_cmd_nl() takes the number of bytes to copy from the
attacker-controlled ncsi_pkt_hdr.length field of the in-band packet
header, while the source buffer is the NCSI_ATTR_DATA netlink
attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr).
The two length sources are never cross-checked: only
nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced.
With hdr->length set larger than the attribute payload (up to 65535
against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies
past the end of the netlink attribute buffer with unsafe_memcpy(),
leaking up to ~64KB of kernel heap memory into the transmitted NCSI
command packet. The destination skb is sized by the declared payload,
so the write side does not overflow - this is a pure OOB read /
information leak, reachable with CAP_NET_ADMIN on systems with a
registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where
NET_NCSI=y is standard).
Reject commands whose declared payload extends past the end of the
data attribute.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
Fixes: 9771b8ccdf ("net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command")
Reported-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20260803043618.3210301-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired.
Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/e9a3909c7a6281967961773ca841e860b8ecf40e.1785596603.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Incoming skbs passing through netfilter flowtable offload hooks (or XFRM
offload path) might already carry a ref-counted dst_entry assigned during
earlier RX or routing steps.
Calling skb_dst_set_noref() when skb already holds a ref-counted dst
overwrites skb->_skb_refdst, leaking the previous dst_entry reference
count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in
skb_dst_check_unset():
WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170
WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234
WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864
Drop any existing dst_entry reference with skb_dst_drop(skb) before
setting the non-referenced flowtable destination.
Fixes: 2a79fd3908 ("netfilter: nf_flow_table: attach dst to skbs")
Reported-by: syzbot+76d4e3a055aec3b007ec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a71b141.9511d2ce.1fc5b9.033b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20260804093328.1831847-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen.
Fixes: 54b92e8419 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260803061739.134737-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sequence used in the SRSO mitigation and still poisoning the RSB.
Do that by emulating the saferet sequence and thus avoiding executing
a RET instruction.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmpmGc8ACgkQEsHwGGHe
VUow/Q/+KJxaQyhYwINEUE2M/mzAjraCJBHbTWIsbpUgwHzC2EjVQluV91Kg5O5s
P3cvbxeAcfx9SWIJ9e0vi5JdxAHDd0Idy0FMccg0xWOPJOzGjXpQZzeg+4yvm4a4
URgr7P+IFNgdnfDsZoTbf510AczlNXFQS4YcmgVDOvdhZjlcLK2/7CYdRtgQ+B3E
J1NkaD9RPW9HaCr5XbCgw+lI8XMQNQEdQ3MGwfCgQERl5i5iM6D33Sh/0bq6zfNy
HiMk27LthH7woHRuTrp2DjqeiygQdAPl+87/NND95KWz73fkqFofMfFkMfTVDvkZ
klibXv1oVkEAnGD2/QUVUrn6EbLU/yXB+7LwHC7O7Du7fMV60xyQhEkxWHYV/Szx
kSOtwaTYHc84KdqsBVFLoS7Gr6sMb0cIGcHwC4dQdWT5ZqztwBZJJklsLjJNoPNG
prFCq1ER3282DJ76C8DUseIKXdLzcMcPZK4gdi1g/g0ESaCRxH2e4aRRMaXMQC2W
uZT6EPkyMl+eR5r0gSFJEXLxFnBVguFeJV2uSh3crnXvrJqKEyJDyHgodDxUzQ9P
wFa6KD+yILiDXMwRDLw8C5EhApQ4MqRmys2HEC65pXWYAm14ivEaOXZHDdQ8pd0W
eaWa90nFe0dwQz00g/A0XfxnEmh4AMIGBsSwAIFsMjKIunizRUk=
=PpIN
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_saferet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
- Add a mitigation for the attack vector of interrupting the saferet
sequence used in the SRSO mitigation and still poisoning the RSB.
Do that by emulating the saferet sequence and thus avoiding executing
a RET instruction.
* tag 'x86_bugs_saferet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Make Safe-RET robust against interrupt injection
